Two accounts that are connected

I hope I can explain this. We bought an ibook and both my son and i have email accounts on it, within, I suppose, my .mac account. then we bought him a macbook and he got his own .mac account. his email is the same. but while it shows up on his computer, it also still shows up on mine. needless to say, a 15 year old boy does not want his mother to see his email! but we don't know how to remove him from my account. My email is version 3.3 - if anyone has answers, it will be deeply appreciated. especially by my son!

Amy,
This is not clear what was the previous situation. Was he using an alias associated with your .mac account, an email only .mac account, or what?
Further, is his own .mac account have the same email address, or is he somehow using the prior address as an alias to his new account email address? I ask this because typically an alias or email only address cannot be converted to a regular one.
Ernie

Similar Messages

HT204088 My daughters have Itunes accounts that are connected to my credit card. I continue to have charges, but both daughters insist that are not downloading. How can I find out which account is being billed on my credit card?

I am trying to find out which one of my daughters is buying music through I tunes and is posting to my credit card. How can I find this out. I have the transaction numbers from my credit card.

If they have separate iTunes accounts then you can check each account on your computer's iTunes : log into an account on your computer's iTunes via the Store > View Account menu option, and you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of its purchases.
If they share the same account then you can't tell, the purchase history doesn't show the device or computer that a purchase was made on.

How to route two vlans on two switches that are connected only on one router?

Suppose that any of the trunk links fails or if you want, suppose that there is no link between SW1 (G0/1) and SW2 (G0/1). How can you make computers in Vlan 10 to see computers in Vlan 20 and viceversa?. I tried creating a bridge group on the router for G0/0.10-G1/0.10 and another for G0/0.20-G1/0.20. Then define interface BVI10 and BVI20. Interfaces came up but you can not configure dot1q on them and switches can not see them. Anyways with one interface on the bridge group going down the BVI interface goes down as well so that's not an option. Router should be 10.10.10.1 and 20.20.20.1 and each computer have that as gateway respectively.

Jody thanks very much!
Indeed the encapsulation was done in the sub-interfaces, as posted in the OP you can not [encap dot1q X] on the BVI interface. Even though, the switches didn't established the trunk with the BVI. Anyways using bridge groups is not an acceptable solution because with the failure of any interface of the trunk links in the router, the BVI interface goes down as well.
You said "if I want to handle it at layer 2" How will you do it at layer 3? I though something like HSRP or VRRP but that doesn't apply since it is only one router. Remember, the router must be able to route between vlan10 and vlan20 for computers on both switches in case of one of the trunk link failure.
This is for learning purposes so I started with Packet Tracer but PT doesn't support bridge groups. Then I tried GNS3. I will try with the router in GNS3 with a switch module but I'm not clear. that will be like having a 3rd switch, right? What I mean is that I will not be using routed interfaces between the router and the switches, right?

I have two Macbooks at home that are connected to a Comcast Wi-Fi network modem. One of the computers has sporadic in receiving the WI-FI signal while the other is unaffected. Both have same operating system. Does anyone know a solution to this problem?

I have two Macbooks that are connected to the same Comcast Wi-Fi network modem. One of the computers has become very sporadic in receiving the WI-FI signal while the other is unaffected. Both have same operating system (10.5.8). I have restarted computer, and unplugged and retarted modem on several occassions to no avail--one still works the other inconsistent. Have spent a great deal of phone time with Comcast and they suggest acquiring latest OS. Does anyone know a solution to this problem?

This does not sound to be a router problem...You should try to uninstall and re-install the ethernet adapter/card installed in your computer...Do you have 2 Ethernet Adapter's by any chance...Check the Device Manager, Click on the Start button >>> Settings >>> Control Panel >>> Double click System, go to Hardware >>> Device manager, click on the plus'+' sign next to Network Adapters and see how many Ethernet Adapters are listed...
Also connect that computer straight to your modem and see check if you get the same message,that 'YOU ARE CONNECTED TO MORE THAN ONE NETWORK'...

Can I disable photo stream from select devices that are connected to my iTunes account?

Hello, I was wondering is there any way to do this because I have three iPads connected onto my account, one is in another country and one my parents own, but for my personal one, I would like to disable this feature so my pictures don't get uploaded. My parents like to see the photos being taken by family in another country and I would like those two devices connected only.

You can turn off photo stream on one device without effecting the others. If you want to keep the photo stream photos on the device you are going to turn it off on, you will need to same them to your camera roll before doing so. To do this open the my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. Then go to Settings>iCloud>Photos and turn off My Photo Stream. This will delete the photo stream photos from this device, but not the others (and you already saved copies of these photos to your camera roll so they will still be on your device).
The other two iPads that are signed into your iCloud account with photo stream enabled will still be sharing the same photo stream but you will no longer see it, and your photos will no longer be added to the stream. They can still share photos with you by adding them to a shared stream and inviting you as a subscriber (as explained here: http://help.apple.com/icloud/#/mmc0cd7e99).

I have a Disney Movie Rewards account that is connected to me iTunes account and the movies I have digital copies for aren't loading in my iTunes movie library. How do I get them there if I've already connected the two accounts?

I have a Disney Mvoie Rewards account that is connected to my iTunes account. I have downloaded digital copies of movies I have purchased before such as Thor: The Dark World, but I recently purchased Saving Mr. Banks and it is not loading in my iTunes movie Library. How do I get it to load there once I have redeemed the digital copy code and have confirmed the two accounts are connected?

Go to Settings>General>Date and Time and make sure it is correct, including time zone.
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

HT1420 How do you find list of actual devices that are connected to your itunes account? I'd like to know before deauthorizing, exactly what devices it is showing as connected

How do you find list of actual devices that are connected to your itunes account? I'd like to know before deauthorizing, exactly what devices it is showing as connected

Click here and ask. If the iTunes Store staff doesn't give it to you, no.
(86004)

How do I see the clients that are connected to the access point?

Hello,
In Wireless Control System (WCS), how do I see all the clients that are connected to the Access Point? I can do a particular search that if I know the mac address. But what I really like to know is that which clients is connected to the network. That means it sould be able to show me, example, Client A is connected to AP 1. The problem in WCS is that I can't do that. Can some please advice how I am able to do this? Thanks.

Two ways:
First:
Under monitor, go to Access Points, then chose the target AP and click on it to open a menu, go to the Current Associated Clients tab.
Second:
User the search tool on your upper right corner, type in the target AP name, execute the search, on the results, click view list, on the list chose you AP and then go to the Current Associated Clients tab.
Enjoy.
Phil.

How do i stop two processes that are running in activity monitor

how do i stop two processes that are running in Activity Monitor took one out of trash and it says preparing to move desktop still running with another one been running for hrs now want to stop these many thanks jen.

Select each one and Force Quit it.
But be careful there are many processes that are run by the OS that if quit will cause problems possibly even crash the system.
regards

TS1292 There are two numbers that are not visible in the middle of the code What can I do?

There are two digits that are not visible in the middle of the itune code. How can I still access this card?

Click here and request assistance, supplying as much of the code as you can.
(74408)

Cannot compile two classes that are on same package

When I compile two classes that are on same package one class that is independent of other class gets compiled but the other class which uses
the first one shows cannot find symbol error with the first class name

try...
javac *.java
that should compile all the java files in that folder at the same time. I dont know if that will fix your problem but it is worth a shot.

How to see all devices that are connected to Apple ID

How to see all devices that are connected to Apple ID

Are you using a software to see all devices that are supposed to be connected to your router? You can reset and start over with your router. Make sure you have a security enabled on it like WPA Personal. You can try DHCP Reservation as well to ensure that the devices that will have access to your router are only the ones you included on the list.

Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

Try restarting your WiFi router by removing power to it for 30 seconds.

I want to cancel my account. I purchased a product that had errors in it. Within minutes I tried to cancel the purchase, and Acrobat will not let me. Furthermore, there are security errors in my account that are unacceptable. Please cancel my account, my

I want to cancel my account. I purchased a product that had errors in it. Within minutes I tried to cancel the purchase, and Acrobat will not let me. Furthermore, there are security errors in my account that are unacceptable. Please cancel my account, my payments. I have called my bank and reported this as fraud.

Kmrnyu, the order placed by you is still under transaction, the order stands canceled.
As soon as the order is complete I shall get it canceled & refunded.
Regarding the account, do you want it to cancel the account? Please confirm.
Regards
Rajshree

To find the user processes that are connected to a database currently ??

Hi,
I wish to find the user processes that are connected to a database currently.
How to find this ?
any specific table/view for this ??
Thanks.

Hi..
You can use
SELECT NVL(s.username, '(oracle)') AS username,
s.osuser,
s.sid,
s.serial#,
p.spid,
s.status,
s.module,
s.machine,
s.program,
TO_CHAR(s.logon_Time,'DD-MON-YYYY HH24:MI:SS') AS logon_time
FROM v$session s,
v$process p
WHERE s.paddr = p.addr
ORDER BY s.username, s.osuser;
HTH
Anand

Two accounts that are connected

Similar Messages

Maybe you are looking for