Two actions on the same day

Hi Experts,
I have activated the additional actions, even though i am not able to perform two actions on the same day. When i am running the second action on the same day, system deletes the first action. Plz help
regards
Kunal

Hi Kunal..
Check below:
Cause and prerequisites
You use the functions 'Additional actions' (infotype 0302) (that is, flag ADMIN EVSUP = 1 in table T77S0). If you delete or shift a created personnel action type 'Leaving' and then create a new personnel action without leaving the transaction, on the list screen of infotype 0000, the system does not display the last but one personnel action.
Solution
To correct the display problem, start report RPUEVSUP for the affected personnel number. Then check Customizing of the personnel action types (table T529A), since the report sets indicator U0302 (update of infotype 0302) active for all personnel actions.
Hope this helps ! if so reward.
Thanks
Shyam

Similar Messages

Recruitment: Multiple Actions on the same day

Hi expert,
Understand that in PA, we are able to perform multiple actions on the same day with the aid of Additional Actions infotype (0302).
However, in Recruitment module (i.e. PB), we are unable to perform the above, the previous action record will be deleted, thus we can't keep track of the actions taken.
Can we extend the use of Additional action infotype to Recruitment (PB db) ? or is there other way to perform multiple actions on the same day in Recruitment ?
All advises are appreciated.
cheers,
Sophie Tran.

Hi,
Please check the below link for that..
http://sap.ittoolbox.com//groups/technical-functional/sap-hr/recruitment-multiple-actions-on-the-same-day-384674
Thanks & Regards,
Sandip Biswas

"Newbie" Unable to run two actions at the same time please help

Hello
I'm a newbie (2 weeks) on Labview, so I hope my problem will sound easy for some of you.
I want to read a file and at the same time get the reading from my sensors (4 sensors).
My program is working when I do each thing in a different program but when I add them the program only read the text file and stop reading the sensor signals...I attach the program file.
The goal is with the text file to add an exact time for each sensor signal I record.
Is there any other possibilities to include a time with the sensors signals recorded ? I need to do this to synchronize the sensors values with CAM program.
Thanks
/Xavier
Ps I used a scan rate of 12000/s but I try 1000/s
and the sensor acquisition is still not working
Attachments:
test3Rdif2802.vi ‏493 KB
readfile.txt ‏195 KB
sensoracquisition30s.txt ‏210 KB

from a glance at your code, it appears that you have nested a loop to read your file, inside a loop to read your sensors. this means the nested loop to read your file must finish before the outside loop to read your sensors can run through another iteration. what you want to do is separate the two loops to run independently of each other (in parallel). use a global variable to know when to stop the loop (if they need to stop at the same time) and if you need to pass data between the loops use a queue (easiest) or you can also use globals with semaphores.

Two actions in the same button

Hi. I have a button witch tells a movie clip, that is loaded
on an empty movie clip on stage (handler) with attachMovie, to play
frame 101 (it leaves the stage). How can I tell the same button, at
the same action (onRelease) to attach another movie clip only when
the other one is over (after I told it to play from frame 101) or
when it´s at frame something?
Anyone can help?
I´m using as2.0

Hi,
Create action binding for your button and try to call both the services from this method binding.
Example :
<af:commandButton action="#{pageFlowScope.myBean.submitButtonMethodBinding} .../>
In the managed bean :
public class MyBean{
public String submitButtionMethodBinding(){
---- calll first service ---
--- call second service ---
return "dontgoanywhere";
}

How to have two actions in the same ResourceAction file?

I have 2 Domino Gateway actiontypes in 1 ResourceAction file. When I import this into IDM, the 2nd action always gets truncated. Can I name each actiontype to differenttiate them to IDM?

You can create a 2nd profile with: firefox -ProfileManager (you have to close all firefox instances to do that)
Then, you can start a 2nd firefox with the new profile: firefox -P <profilename> -no-remote

Prevent multiple personnel actions being performed on the same day

Hi Experts,
Does anyone know if it is possible to prevent multiple personnel actions from being performed on the same day even where the action does not change the status of the employee?
Regards,
Janet

Hi Janet,
i mean to say if you activate the additional action then only the second action on the same day gets stored in to the IT-0302.
if you dont activate additional actions then if you run the second action on same day it will over write the existing record and gives warning message that this record over write the existing record.
so here the point is if additional actions is activated then only system allows you to perform the second action on same day..
other wise it will replace the existing record.
if you want to prevent the additional actions to be prevented even after activating it --i think its not possible because the functionality of the IT 0302 is to save more than one record.
yes you can restrict the to perform the action through authorizations
hope it is clear
regards,
mohammed

TS1362 downloaded two albums songs only play for 45 seconds and moves to the next one. happened to two albums downloaded on the same day need help

downloaded two albums on the same day will play only 45 seconds of a song and goes to the next song on both albums need help

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

I buy all of our movies on our apple TV that is associated with my apple ID. I want to put a movie on my wife's new iPad but it gives me a 90 day warning that she won't be able to download anything. Do we really have to buy two copies of the same movie?

I buy all of our movies on our apple TV that is associated with my apple ID. I want to put a movie on my wife's new iPad but it gives me a 90 day warning that she won't be able to download anything. Do we really have to buy two copies of the same movie? There has to be a way for one family to share movies on all of our devices.

Ahh, thank you! What a pain in the neck. I figure I must have been signed into his account at some other point in time, maybe after... watching a movie..? [Though, that'd be the iTunes store, right? Not the App Store.] Anyway, some situation must've occured where I absentmindedly updated and iPhoto is now tied up with his account.
I'll go ahead and contact support to see if they can get me sorted. I suppose I can just ask him for his password, but.. oh, you know, it's a temporary solution and I guess I was just hoping to easily get iPhoto properly associated with myself again. Thank you!

Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.

consider this situation,
Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.
my tables are from northwind:
[orders] = OrderID, CustomerID, EmployeeID, OrderDate, RequiredDate, ShippedDate, ShipVia, Freight, ShipName, ShipAddress, ShipCity, ShipRegion, ShipPostalCode, ShipCountry.
[orders details] = OrderID, ProductID, UnitPrice, Quantity, Discount.
i tried some but it is not exact, it gives wrong result.
select pd.CustomerID,pd.ProductID, pd.no_of_time_purchased, sd.ShipVia, sd.same_ship_count, shipped_day from
select ProductID,o.CustomerID,COUNT(productid) as no_of_time_purchased
from orders o join [Order Details] od on o.OrderID=od.OrderID group by ProductID,o.CustomerID
having count(od.ProductID) >1) pd
join
(select OrderID,customerid, shipvia, count(shipvia)as same_ship_count, DATENAME(DW,ShippedDate)as shipped_day from orders
group by customerid, ShipVia, ShippedDate having COUNT(ShipVia) > 1 ) sd
on sd.CustomerID=pd.CustomerID

Hi,
I think I have a solution that will at least give you a clue how to go about it. I have simplified the tables you mentioned and created them as temporary tables on my side, with some fake data to test with. I have incldued the generation of these temporary
tables for your review.
In my example I have included:
1. A customer which has purchased the same product on the same day, using the same ship 3 times,
2. Another example the same as the first but the third purchase was on a different day
3. Another example the same as the first but the third purchase was a different product
4. Another example the same as the first but the third purchase was using a different "ShipVia".
You should be able to see that by grouping on all of the columns that you wich to return, you should not need to perform any subselects.
Please let me know if I have missed any requirements.
Hope this helps:
CREATE TABLE #ORDERS
OrderID INT,
CustomerID INT,
OrderDate DATETIME,
ShipVia VARCHAR(5)
CREATE TABLE #ORDERS_DETAILS
OrderID INT,
ProductID INT,
INSERT INTO #ORDERS
VALUES
(1, 1, GETDATE(), 'ABC'),
(2, 1, GETDATE(), 'ABC'),
(3, 1, GETDATE(), 'ABC'),
(4, 2, GETDATE() - 4, 'DEF'),
(5, 2, GETDATE() - 4, 'DEF'),
(6, 2, GETDATE() - 5, 'DEF'),
(7, 3, GETDATE() - 10, 'GHI'),
(8, 3, GETDATE() - 10, 'GHI'),
(9, 3, GETDATE() - 10, 'GHI'),
(10, 4, GETDATE() - 10, 'JKL'),
(11, 4, GETDATE() - 10, 'JKL'),
(12, 4, GETDATE() - 10, 'MNO')
INSERT INTO #ORDERS_DETAILS
VALUES
(1, 1),
(2, 1),
(3, 1),
(4, 2),
(5, 2),
(6, 2),
(7, 3),
(8, 3),
(9, 4),
(10, 5),
(11, 5),
(12, 5)
SELECT * FROM #ORDERS
SELECT * FROM #ORDERS_DETAILS
SELECT
O.CustomerID,
OD.ProductID,
O.ShipVia,
COUNT(O.ShipVia),
DATENAME(DW, O.OrderDate) AS [Shipped Day]
FROM #ORDERS O
JOIN #ORDERS_DETAILS OD ON O.orderID = OD.OrderID
GROUP BY OD.ProductID, O.CustomerID, O.ShipVia, DATENAME(DW, O.OrderDate) HAVING COUNT(OD.ProductID) > 1
DROP TABLE #ORDERS
DROP TABLE #ORDERS_DETAILS

Two Travel Expenses for Meals in the same day

Hi SAP Gurus,
simple question for you, but I'm quite a newbie with Travel...
Actually I'm not allowed to insert two Travel Expenses (not Reimbursement) for Meals in the same day, the system give me a blocking error message.
Where have I to customize this function? I need to insert two Travel Expenses for Meals the same day, one for lunche and one for dinner.
Thank you very much, bye!
Stefano

Hai..
Can u pls let me know where ur trying to enter the travel expenses.. i mean in which infotype???
PLS MENTION INFOTYPE NUMBER
Edited by: Ram Manohar on Mar 25, 2008 4:15 PM

How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

Hi,
Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
For example:
djay>Table-1>Eject - ⌘⇧1
djay>Table-2>Eject - ⌘⇧0
Thanks in advance for any help!!

A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
NodeList nodes = document.getElementsByTagName("Data");
System.out.println(nodes.getLength() + " \"Data\"-elements found");
for(int i=0; i<nodes.getLength(); i++) {
Node node = nodes.item(i);
}

How to make this two things at the same time ?

Hello
When my mouse is on a area, I need :
- to show a object (a rectangle inserted with the toolbar)
- to show a caption
I think it's not possible to do this two things at the same time when I use the rollover functions (Rollover caption or Rollover Image).
I would like to use a button, but the button works only if I click it, and not when I just pass my mouse on it.
Someone have an Idea?
I can't use Javascript.
Thanks

Rick is correct. You can use the Rollover Slidelet's rollover area to trigger an Advanced Action. You'll need to create this Advanced Action with two clauses. One to SHOW the caption, and the other to SHOW the rectangle.
Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
The Event Handler will detect when the mouse is over the object and trigger its own Success criteria. You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
Trial versions of the widget can be downloaded from here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

If I have two appointments at the same time, they overlap in the iOS 7 calendar rather then appearing side-by-side so that I can't read one of them due to the identical colors of the two appointments. Is there any way to fix this with a setting?

If I have two appointments at the same time, they overlap in the iOS 7 calendar rather than appearing side-by-side in the daily view, so that I can' read both of them due to the same background color. Is there a way to change this via a settings change?

I fyou have "all day" event that are taking up the entire day, check the event. All day event only appear at the top of the time line (and just below the week view). I suspect they are not actually set up as all day, but have specific time frames assigned.
In teh screen shot below, "Sample" is an all day event; NFL: CAR@SF is not.

0PA_C01 different results from two queries on the same cube ....

HI
Can you please help with this problems ...
i am running a two queries with the same restrictions e.g
Sep 08 for employee 22345 ,
In one report it shows the Pay Scale level as A1 , then in the other report it shows Pay scale Scale level as A2 ,
looking at the master data in 0employee , the first report is right ... this is how the data looks like in 0employee
Employee Valid from      To                Pay scale Level
222345       2007-11-03   2008-09-30     A1
222345       2008-10-01   9999-12-31     A2
Can someone please shed some light on this , im thinking it has something to do with update rule but even that is supposed to use last date of the month , not 1st day of the following month. The Cube is a stndard cube 0PA_C01 and the update rule aswell .....

Hi,
Please check in the cube whether the data for the Employee is getting with two values like shown in your question:
Employee Valid from To Pay scale Level
222345 2007-11-03 2008-09-30 A1
222345 2008-10-01 9999-12-31 A2
and also check whether when the data loaded to the cube.
There may be some change in the report structure where the difference is getting may in the column wise or row wise restriction may present.
Please check on the structure of the report also.
With Regards,
Ravi Kanth

Query with the days of a period and the same days of last year

I need a help.
We have a sales cube with daily values.
We have a query that restricts a month (0CALMONTH) and shows the daily values for this month.
No problem, we have only to put 0CALDAY on the line and the value on the columns.
But we need also to show the values of the same days from last year.
Example:
The restricted month is july/2011.
0CALDAY is on the line, so the query shows the values for
01.07.2011   110,00
02.07.2011   108,00
31.07.2011   109,00
How can we show in the same line the values for july/2011 and july/2010?
Example:
         July/2010    July/2011
01     95,00            110,00
02     96,00            108,00
31    94,00             109,00.
Thanks in advance
César Menezes

Thanks for the answers until now.
Surely a Day characteristic (ex. CA_DAY, derived from 0CALDAY) would work.
But we have this requirement in many other cubes (I posted only an example) and it's not feasible to create this characteristic now.
I understood the other suggestions, but the problem is not on selecting the values.
We have two restricted key figures, one for a period (filled by the users) and another one for this period - 12.
They work OK and bring the correct results.
The problem is on presenting the results, because as we have 0CALDAY in the line the results appear on two different lines.
Example:
15.07.2010    950,00
15.07.2011    980,00.
Is ther any way to present the results in the same line?
Example:
15.07.2011    950,00 (last year)     980,00 (today)
or
15.07             950,00 (last year)     980,00 (today)
or any other way?
César

Two actions on the same day

Similar Messages

Maybe you are looking for