Two Active engines shows

Hi
After started up the report server I found in the window following parameters
Version 10.1.2.0.2
Name repserver
Status Report server is ready
Jobs in Queue 0
Active Engines 2
There what is meant by Active Engines 2
Cheers
Shabar

Hi Denis
But it shows only one report server
C:\DevSuiteHome_1\BIN>rwdiag.bat -findall
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
(1) Name = repserver : Type = server : Host = Shabar-PC
C:\DevSuiteHome_1\BIN>Cheers
Shabar

Similar Messages

Manual menu shows two active menu items on one page

Hi--I'm having an issue where a manually-created menu shows two active menu items on the same page (as if two pages were active at the same time).
You can see the issue on my test site here:
http://teknationnewsite.businesscatalyst.com/telecommunications-services.html
On the left hand menu, even though only the Telecommunications Services page is active, the menu shows an active state for the menu item below it also. How can I fix this? The states look like they are created correctly in the states panel.
Thanks,
Jennifer

Okay, never mind. I am an idiot. It was a linking issue. I can't figure out how to delete this thread, however, so just please ignore.

How do I uninstall SyncMate Server, Activity Monitor shows it still there after appzapper uninstall of SyncMate app? Killing in AM proceeds with a SyncMate Server startup again??

How do I uninstall SyncMate Server, Activity Monitor shows it still there after appzapper uninstall of SyncMate app? Killing in AM proceeds with a SyncMate Server startup again??
Mavricks, MacbookPro, typical config of everything and standard business user, no heavy graphics, animation or media editing. MS Office, web apps, etc.
I have the same issue with Logmein, which I installed a trial, uninstalled with appzapper, which I thought does a good job of untangling the components of apps but for these 2 it doesn't. Any help would be greatly appreciated.
Thx,

Usually applications like these have their own uninstallers, either build into the installer ( ! ) itself or as a separate uninstaller app. Check the site of the software provider for instructions.
Here's the instructions for SyncMate: http://wiki.eltima.com/user-guides/syncmate-mac-os/uninstall.html
And LogMeIn: http://help.logmein.com/SelfServiceKnowledgeRenderer?type=FAQ&id=kA030000000DGF1 CAO&kw=

My lap top wont shut down, i have two mail icons showing in dock and one wont quit??

i have two mail icons showing on my docking station one is normal the other has number 6 in red.. problem is i try to remove and quit the icon with the number on it and it wont let me it does nothing.. now i cant seem to shut down the lap top as it keeps saying please quit mail first but it wont quit or cant seem to remove it.. the other mail icon im assuming the correct one is working , but what is this other one doin ther?
anyhelp is greta thanks

i worked it out lmao

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.

Activity reports showing only UME users

Hi,
Activity reports showing only the status of UME users. It is not showing the status of the users coming from LDAP.
Will there be any additional settings needed for this. Can anyone give me the step by step full details of the activity reports cofiguration settings.
Raghu

Hi Raghu,
What kind of report are you talking about?
General information for How the Portal Activity Report Works :
http://help.sap.com/saphelp_nw70/helpdata/EN/b5/c652070d474533a18a930112a4b926/frameset.htm
Viewing Activity Reporting Status :
http://help.sap.com/saphelp_nw70/helpdata/EN/08/242f423d09f750e10000000a155106/frameset.htm
Regards
Victoria Gur
SAP IBD

How to mimic a two-projector slide-show presentation?

This may not be the best place to post this question. Please let me know if there is an alternative forum.
I want to present a few hundred 1920 x 1080 visual "segments" (S1, S2 ...) that cross-fade into each other at the press of a button. No audio is involved except the presenter's voice. A presentation might run like this:
S1 - Still. (Press button to dissolve to next segment)
S2 - Still with preset zoom-in. (Press button to dissolve to next segment, even if zoom not finished)
S3 - Still with pan. (Press button to dissolve to next segment, even if pan not finished)
S4 - Short video. (Press button…)
S5 - Still. (Press button…)
The collection of segments would be generated by Premiere (or other program). However, I would prefer NOT to use a computer for the presentation, but rather, a BluRay player connected to a digital projector via a HDMI cable. The data does not have to be in BluRay format. It may, for example, be any type of file readable by the player, and stored on a CD, DVD, USB stick, or SDHX card. The idea is to insert the media with the relevant file on it (or files), press PLAY, and use one of the remote control buttons to move forward to the next segment.
In case you haven't got my drift: it's similar to an old fashioned two-projector slide-show presentation, but fully digital and some of the images move.
Very simple concept, but how can I achieve the desired result? Almost all image-editing programs could assemble the segments (even iPhoto, for example), but how do I achieve the smooth cross-fading and the move-to-next-segment functions? If I was writing a flowchart for what I want, it would be:
1. Complete the segment currently showing, then freeze image and wait for press of NEXT SEGMENT button.
2. If NEXT SEGMENT button is pressed before the end of segment, cross-fade to next segment.
3. Loop to 1.
Any suggestions most appreciated.

I would look into ProShow Producer. It is designed to do much of what you want.
Encore has a limited SlideShow feature, that does allow for manual advance, but the other aspects, like the Zoom will probably not be what you want. You might give it a try, just to test. One limitation is that one can only have 99 slides per SlideShow, but then can have 99 SlideShows, IIRC.
Good luck,
Hunt

Why does Activity Monitor show traffic to my external drive?

Because one of my email accounts was hacked a couple of months ago (from my provider's end, I'm convinced), I have been monitoring network usage on my iMac using Activity Monitor. Yesterday, I noticed almost continuous use, altho "spiky". The spikes were very regular and high and just kept going on and on. I shut down all my apps (including mail, browser, etc.) except Photoshop. Spikes still there. Pulled out the Ethernet cord. Spikes still there. Shut down blue tooth, wi-fi - spikes still there. Overnight, I shut down my computer. This a.m. when I powered up, still spikes. I noticed Time Machine was running. Stopped it, and spikes stopped. I have my back up on a separate external hard drive. Why in the world would Activity Monitor show this as "network activity"? Is there any way I can use settings that would show only "real" network activity, from outside my wi-fi, blue-tooth, and external drives? Spiky right now (can't get screen shot to upload), but more irregular. Have browser, email,and others open. Time Machine not running.
Maybe there's some other app that would help me watch my network usage in the way I would like. Please recommend. Thx!

https://discussions.apple.com/thread/3045965

WLC: two active Radius servers

Hello!
Does anyone know, whether it is possible to configure several active RADIUS servers, so that the WLC can send accounting information to several different accounting servers at the same time?
Maybe it is planned to be released in future versions.

We can't have two active radius accounting servers at the same time. WLC will only reach to backup accounting server if the primary server is down or unreachable.
~BR
Jatin Katyal
**Do rate helpful posts**

RWB - Cache Connectivity Test - Adapter Engine shows error

Hello Friends,
In our one production system (PI 7.1), while do 'Cache Connectivity Test' from RWB -> Component Monitoring, it shows the following error for Adapter Engine under Integration Directory.
Error:
Cache notification from Integration Directory failed Error when accessing the System Landscape Directory.
No SLD elements of type SAP_XIAdapterFramework found
But, Integration Server - ABAP, Integration Server - JAVA shows green color. The messages are flowing through the Adapter Engine fine. i.e I am seeing 2 Adapter Engines under Integration Server in Component Monitoring. One Adapter Engine is in grey and another Adapter Engine shows green color.
When I click the grey color adapter engine, it immediately turns to red color and some different host name url is displayed (http://<wronghost>:53000/AdapterFramework/rtc).
So, what could be the problem ?
Kindly clarify, friends.
Thanking you.
Kind regards,
Jegathees P.

Hello Jegathees
Apply the solution in note #804124 HTTP communication with XI Adapter Engine fails. Set the parameters:
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
as described in the note.
Regards
Mark

All of my Calendar information is on iCloud. Everything has been syncing fine on both iPhones 4s and iPad 2. Now however only the past two months are showing on my devices while all the information is on iCloud.

My iCloud Calendar and devices ( iPad 2 and iPhones 4S ) have been syncing fine for the past several months. Now however only the past two months are showing up on my devices while the iCloud Calendar continues to show all of the events. Why is all the information still not syncing?

Welcome to the Apple Community.
Settings > Mail, Contacts, Calendars, scroll down to the Calendars section and change the sync option to something other than 'Events 2 month back'.

Last night i downloaded two t.v. shows and it took over 8 hours. Is there a problem witht the apple server?

Last night it took 8 hours to download two t.v. show, and today it says it will take 8 hours to download the lastest upgrade to ITunes. Is there a problem with the apple server? I am not having problems downloading from any other web site and i have excellent wireless strength and a very fast download servive from Verizon.

Are you going over Wi-Fi or do you have an ethernet cable plugged in to the ATV? If ethernet, unplug it and reconnect the ATV using Wi-Fi and re-run the update. There is a known bug regarding updating the ATV with ethernet, using Wi-Fi fixes it. I had this problem on my brand new ATV and after searching the web I found this resolution, and it worked. After the update (which took about 20 minutes total) the ATV rebooted itself, I then shut it down, reconnected with my ethernet cable, and now all is well.

Activity monitor shows Logic CPU use @ 100% randomly

I'm running a light session (6 audio, 2 instruments) and after I initiate playback, the rainbow ball appears and the activity monitor shows high CPU activity. The problem seems to occur particularly if I click anywhere in the arrange window while playing. Any ideas?

unresolved, isolated condition

HT202060 How can I make Activity Monitor show one graph instead of four for MacBook Air?

How can I make Activity Monitor show one graph instead of four for MacBook Air?

Learn about OS X: Activity Monitor shows one CPU Usage graph on systems with more than four cores
Copied and pasted from top of the page.

Activation limit, or maximum activation exceeded showing before Deactivating system formated

activation limit, or maximum activation exceeded showing.
We have formated system without deactivating

Please contact Activation Support:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html
Click the Contact Now button at the end of the page and chat with a live agent who would resolve it ASAP.
Regards,
Ashutosh

Two Active engines shows

Similar Messages

Maybe you are looking for