Two ADC 17" mac displays w/Mac Pro?

I have a pair of the older 17" Mac displays with ADC connectors. I used them with my old MDD G4, which came with a video card that had DVI and ADC connectors. So, I obviously had to buy an ADC/DVI converter so I could use the DVI port that the computer came with (one of the monitors just plugged into the ADC.)
Now that I have the new Mac Pro, with two DVI connectors on the card, does anyone think there would be a problem buying another ADC/DVI converter so I can use two monitors with the Mac Pro? I just wanted to make sure.

"• the 27" is directly connected to the other MDP port.
• One of the 20" monitors is using the MDP adapter into the 5770.
• When I try to hook up the other 20" to the DVI port on the 5770 I get nothing.
Note: If you are using an Apple Mini DisplayPort to DVI adapter, only two displays are supported across the three ports.
If you are connecting three displays, any DVI displays must be connected to either the Dual-Link DVI port or must use an Apple Mini DisplayPort to Dual-Link Adapter.
You MUST use All "Active" or "Powered" Mini DisplayPort connector such as the Apple Dual Link, or you can only use two displays

Similar Messages

5770 with 27" Apple LED and two 20" Apple Cinema Displays w/Mac Pro

As stated, I just bought a brand new Mac Pro 8-core (2010 ID 5,1) with a 5770 card and I'm trying to hook up a new 27" Apple LED and two 20" cinema displays. One of the 20" monitors is using the MDP adapter into the 5770 and the 27" is directly connected to the other MDP port. When I try to hook up the other 20" to the DVI port on the 5770 I get nothing. The screen is black and the it is not recognized as being connected. I'm using the standard DVI connector that came with the 20" direct into the 5770. To make sure it isn't a monitor problem, I switched out the 20" displays and both work using the MDP adapter but neither work plugging directly into the DVI port on the 5770. I believe the 20" monitors use DVI-D. (Is that correct?) So what's the scoop on getting blank screens when plugging into the DVI port on the 5770? Thanks for any help.

"• the 27" is directly connected to the other MDP port.
• One of the 20" monitors is using the MDP adapter into the 5770.
• When I try to hook up the other 20" to the DVI port on the 5770 I get nothing.
Note: If you are using an Apple Mini DisplayPort to DVI adapter, only two displays are supported across the three ports.
If you are connecting three displays, any DVI displays must be connected to either the Dual-Link DVI port or must use an Apple Mini DisplayPort to Dual-Link Adapter.
You MUST use All "Active" or "Powered" Mini DisplayPort connector such as the Apple Dual Link, or you can only use two displays

Have 21" mac display,should I buy mini or pro mac?

I have a 21" mac display but my pro mac was destroyed, should I buy new pro or mini mac?

If your Pro was pretty old and only a 4 core version,
circa 2008 or before, then the current crop of Minis
will probably not be that much of a difference, depending
on the graphics card you had in the Pro.
The Minis with the HD3000 integrated graphics are okay
for most general purpose uses and apps that are not
very graphics intensive. The model with the Radeon
chip is an improvement, but only has 256k dedicated
VRAM.
If the Pro was newer or was an 8 core or more, you will
be very disappointed in performance.
Perhaps your best bet since moving from a Pro, is to
sell your display and get yourself an i7 equipped iMac.
Only 8 core Pros outperform them. The new topend
Macbook Pros are real screamers as well.
See Geekbench comparisons:
http://browser.primatelabs.com/mac-benchmarks

Want to run two 30" cinema displays from Mac Pro

I'm running Avid Media Composer software to edit a film that I made, and I would like to run (if possible) two Apple 30" cinema displays next to each other off of my Mac Pro (the computer was purchased at end of 2009). While editing with Avid software, I like to spread out my work and bins in able to see everything, and strange as it may sound, I'd like more room than one 30" display can provide. Currently, I have one Apple 30" Cinema display in use, and could purchase another large display if I can find out-- definitively, if my Mac Pro computer will be able to handle it and power it effectively. I realize that Apple doesn't sell the 30" displays anymore, but I saw a few relatively inexpensive ones available on Craigslist recently.
The second monitor that I'm using now is a much older (non-Mac) monitor (and smaller) and the resolutions don't match the high resolution of my single Apple 30" display. So, my reason for wanting a second, larger display are twofold... 1) to see more of my work, and 2) to get the highest resolutions to match (2560x).
The ports on the back of the Mac Pro don't look like they will support the use of a second 30" display, just one. Does anyone have any suggestions?
Do I need to purchase another video card to run a second 30" Apple display? If so, which ones are best/do you suggest?
Do I need to upgrade my processing speed (get a faster processor) to run two large, high-rez monitors?
specs:
Mac Pro
10.6.6
Processor: 2 x 2.8 GHz
Memory: 2 GB
800 MHz DDRZ FB-DIMM
Quad-Core Intel Xem
Purchased end of 2009

If it has two DVI ports, just plug in the second display with an additional Dual-Link DVI cable -- the card can run both displays without issue.
If it has one DVI and one other type, Exactly which display card do you have installed?

Does anyone have two 24" LED Cinema Displays on their Mac Pro?

I'm wondering if there are any other Mac Pro users out there with two 24" LED Cinema Displays? If so, are you able to adjust the brightness of both displays? For me, no matter which brightness slider I adjust in System Preferences, only the brightness of one of the displays is adjusted.
I originally created a thread last September:
http://discussions.apple.com/thread.jspa?threadID=2160532
If you have this problem too, please report it to <http://bugreporter.apple.com/>. My original Radar bug was #7222745, and it was found to be a duplicate of #6828443. Based on the IDs, I'd say this has been a known issue for at least a year.
Thanks,
Patrick

I am using logitech G19 mouse and Naga Razer Epic, my current suspect that is their official driver which make my OS X 64bit kernl go nut. Does Logitech Control Center work for later version of their products such as G19?
If I plggued in the G19 without installing their official gamepanel software, The heyboard still work, volume control slider works like a charm. I just get no advantages from the LCD screen (kind of pointless).
If I install the razer mac driver, I keep seeing error log in console for the kzcorengineand razercorenginer process.
Idid clean install of Mac OS X and have not experienced freeze except once when I was plugging in my 500gb transcend external drive. This Ext. Drive require two usb slot for power and transfer data.
I am not sure if the freeze was coincidental or related to the transcend external drive I used. I did a directory permission repair and a repair to the mac drive, how things seems to stabilised.
However I want to take my test further to install office 2011 to see if it cause those random unpredictable freeze again.
Sigh, I paid $200 for such a good keyboard, but they have bad apple support. I dont like the apply ketyboard and magic mouse. It's immpossible to touch type on and even harder to play any game at all.
Wayne, when you use your logitech product, do you install the product specific driver for each product plus LCC? or you just install LCC.
Thank you

Can I install TWO HD 4870 cards in my Mac Pro?

Please can you help?
I've just bought an 8-core 2.66 Mac Pro and two Radeon HD 4870 graphics cards, but each card requires two power cables to connect to the logic board, which has only two connectors. Does anyone know where the two cables to the second card should go? The second card works fine, but I expect the cables are for the cooling fans, so I don't want to fry the second card!

It's just that I have bought two new Apple LED displays (with Mini-DVI connectors), and of course there's only one Mini-DVI port on the HD 4870, hence the reason why I bought two cards. I can't find a Mini-DVI to DVI adaptor anywhere for the second port on the same card,
You need a DVI to Mini DisplayPort converter. There are a couple available now:
<http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html>
<http://www.gefen.com/kvm/dproduct.jsp?prod_id=8913>
does the GT120 also require a power supply from the logic board?
No.

Can i use Apple 2005 20-inche cinema display on Mac pro ?

can i use Apple 2005 20-inche cinema display on Mac pro ?

If the display has a DVI connector it will plug into the Mac Pro directly. If it uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

27" Thunderbolt Display on Mac Pro

I have a Mac Pro (late 2010) with two 27" Apple Cinema Displays, I would like to replace one of them with a new 27" Thunderbolt Display just because of the HD iSight camera. Is it possible to connect it to my current Mac Pro? I don't care about the Thunderbolt at all.

No. Unfrotunately I was in the same boat with a late 2010 MacBook Air. I went ahead and took the hit getting a 2011 MacBook Air and sold my previous one to a friend at a discount.
With a 2011 MacBook Pro (w/ Thunder bolt) you woudl be able to place the Thunderbolt display first in the chain and then the second cinema display on the end. The thunderbolt display will have all the expansion ports (firewire, usb, etc. available).
Note -- you may have issues though using Bootcamp with thunderbolt as currently there is no way to use the iMac 27" thunderbolt as a target monitor even with the late model MacBooks which have thunderbolt. I feel it's plausible they will address this with better thunderbold windows drivers however.
If you are interested on getting rid of one of your Cinema Displays I may take you on it just because of the Bootcamp issue which works fine with that one. Let me know.

Can a Mac mini support video to two 30" apple studio displays?

Can a Mac mini support video to two 30" apple studio displays at the same time? If so, how do you do it and what resolution can be acheived for each monitor?

Hi Brian,
Nope, or not very well...
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).

How to make tv as display, wireless-mac bk pro-2yr old tv?

how do i make tv as display, wirelessly -mac bk pro 2009- and samsung 40'' 650t tv 2yr old,

you need this for one thing http://www.amazon.com/Samsung-WIS09ABGN-LinkStick-Wireless-Adapter/dp/B0021LA1BE
or if your tv is near your router you should just plug it in directly via ethernet cat6.
further reading about your tv and how it connects to stream content is needed.

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim

Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

See > http://support.apple.com/kb/PH11302
To be able to use the iMac as an external display, the Mac Pro should come with a Mini DisplayPort or Thunderbolt port, so think that it will include Mini DisplayPort or Thunderbolt, although we don't know anything.
To connect the iMac to the Mac Pro, as your iMac has got a Mini DisplayPort, you have to use a Mini DisplayPort to Mini DisplayPort cable (Thunderbolt is compatible with Mini DisplayPort cables, but Mini DisplayPort isn't compatible with Thunderbolt cables). Then, just follow the steps of the page above to use the iMac as an external display

I have two "MACs" and Final Cut Pro 7. I need a license to use this same software on both "Macs" How do I get it?

I have two "MACs" and Final Cut Pro 7.
I need a license to use this same software on both "Macs"
How do I get it?

You don't. You can install the same copy of FCP-7 on two macs (as long as you own both macs). You can't operate both copies at the same time.
MtD

If possible connect my desktop (mac) with my MacBook Pro like secondary display with thunderbold

I wnat to connect my desktop (mac) with my MacBook Pro like secondary display with thunderbold (in the other side is working)

Hello edolillo,
It sounds like you are wanting to use your iMac as a secondary display for your MacBook Pro using a Thunderbolt cable. If your iMac is compatible, you may be able to use Target Display Mode, and this article outlines the requirements for it:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Target Display mode Requirements:
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or ThunderBolt connection
A ThunderBolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (21.5-inch, Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (27-inch, Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (21.5-inch, Late 2012)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (27-inch, Late 2012)
Thunderbolt to Thunderbolt
Thunderbolt
If your iMac model is supported, there are steps in the article to help you get that set up.
Thank you for using Apple Support Communities.
Take care,
Sterling

New cinema display on Mac Pro monitor keeps turning off/going dark. Support told me a keyboard shortcut (something like option R L)... I'd appreciate it if anyone knows it. I had this problem when i 1st bought it 2 months ago.

My new cinema display fro mac pro just went dark. When I 1st bought it, the display wouldn't turn on.I called support and they gave me a keyboard shortcut - something like Option+R+L - that you held down for 2 restart cycles. Then it magically turned on. I can't remember the sequence and I'm afraid to guess! I'd appreciate if anyone knows the trick. I'm also wondering if I should bring this display back...

Cassandra from Apple Support ROCKS!!!! She's a supervisor somewhere and should have a raise. Pleasant, smart and professional with a customer who wouldn't take "I don't know" for an answer.
If your cinema display goes dark:
1. shut down computer
2. restart
3. immediately hold down Command-Option-P-R keys simultaneously for a few minutes (seems forever)
4. keep holding keys for 2 startup cycles
5. release and go back to work if you're lucky to have a restored screen

Two ADC 17" mac displays w/Mac Pro?

Similar Messages

Maybe you are looking for