Two adjustment layer in two different grups

Hello
I have a problem with my layers which I can not figure out how to solve.
see picture:
I have a group called: "Hele akvarier" " where I have used "Create new fill adjustment layer" - "Brightness / Contrast" to the layers which are under.
(Layer 2, Original Copy, Original).
Over is there are two layers named "Layer 3, Layer 1". These layers, I also need to use the "Brightness / Contrast" to they're going to look right, but the top "adjustment layer" affects all the layers under.
How do I get my layers divided into two groups, each with its "adjustment layer" to use each with its own settings?

Put Layer 1, Layer 3 and the top Brightness/Contrast layer in a new Group. The Group will have a default blending mode of Passthrough which will still allow the Brightness/Contrast to affect the image below the Group. Change the Group's blending mode to Normal to limit the Brightness/Contrast effect to the lower layers inside the Group.
Similarly, change the blending mode of "Hele akvarier" to Normal to limit its Brightness/Contrast to the lower layers inside the Group.

Similar Messages

How to open a raw image with two different exposures?

Hello,
I am trying to open a raw image file in Elements with two different exposures so that I can use an adjustment layer to blend the exposures. For the life of me, I cannot figure this out, and the online help is completely useless. I have read everything in the online help about working with layers and it does not mention a single thing about this process. I know it can be done because I have done it before with a previous version of Elements, but I remember it being a very awkward experience. Can anyone point me to a page with this technique, or share the secret? Thanks. If anyone from Adobe is watching this forum, please try to make this product easier to use, more intuitive, and less reliant on subtleties, and by all means, PLEASE improve the documentation as it is practically empty of any useful information.
Thanks,
Shan

I tried that. When I open one image and set the exposure, then go to open the second image, nothing happens. I then saved one image as a psd file, then it would let me open the raw file a second time. When I had both open on the same screen and dragged the layer from one into another image, the layer size ended up being different than the other file. It was shifted down and to the left. I need these images to be pixel locked, and the user experience I went through did not allow me to do this.
I also do not see a way to copy/paste layers between files.

Separate sampling rate for two different channels for a USB-6009 daq

Hi,
I am using a USB-6009 and incorporating the 'daq assistant' to change the sample rate. I am trying to find a way to set the sampling rate to two unique values for two separate channels. I've tried setting up two daq assistants and adjusting the sample rate different for each channel, though this does not work. Is there any way to set the sample rate high for all channels then reduce the rate for a different channel - or an alternative? I would appreciate any input on this, thank you!
- Anthony
Solved!
Go to Solution.

All tasks on a DAQ board that use a sampling clock must use the same clock. Therefore, you cannot have two tasks on the same DAQ board sample at different rates.
Alternatives would be:
1. to combine all of the channels into a single task and just accept the extra data
2. get an extra DAQ board to use in parallel
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to create Analysis from two different subject areas with diff models

Hello,
I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
whether it is possible to do in OBIEE?
Please help me
Kind regard
robix

Hi
One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
But if you indeed interested in UNION (or intersect) queries, then do this:
Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
That should give you a start.
http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
Award Points it is useful.
Thanks
satya

Need suggestion for ISE distributed deployment model in two different data centers along with public certificate for HTTPS

Hi Experts,
I am bit confused about ISE distributed deployment model .
I have two data centers one is DC & other one is as a DR I have requirement of guest access service implementation using CWA and get public certificate for HTTPS to avoid certificate error on client devices :
how do i deploy ISE persona for HA in this two data centers
After reading cisco doc , understood that we can have two PAN ( Primary in DC & Secondary in DR ) like wise for MnT (Monitoring will be as same as PAN ) however I can have 5 PSN running in secondary i.e. in DR ISE however I have confusion about HA for PSN .. since we have all PSN in secondary , it would not work for HA if it fails
Can anybody suggest me the best deployment solution for this scenario ?
Another doubt about public certificate :
Public Certificate: The ISE domain must be a registered or part of a registered domain name on the Internet. for that I need Domain name being used from customer .
Please do correct me if I am wrong about certificate understanding :
since Guest will be the outside users , we can not use certificate from internal CA , we need to get the certificate from service provider and install the same in both the ISE servers
Can anybody explain the procedure to opt the public certificate for HTTPS from service provider ? And how do i install it in both the ISE servers ?

Hi there. Let me try answering your questions:
PSN HA: The PSNs are not configured as "primary" or "secondary" inside your ISE deployment. They are just PSN nodes as far as ISE is concerned. Instead, inside your NADs (In your case WLCs) you can specify which PSN is primary, which one is secondary, etc. You can accomplish this by:
1. Defining all PSN nodes as AAA radius servers inside the WLC
2. Then under the SSID > AAA Servers Tab, you can list the AAA servers in the order that you prefer. As a result, the WLC will always use the first server listed until that server fails/gets reloaded, etc.
3. As a result, you can have one WLC or SSID prefer PSN server A (located in primary DC) while a second WLC or SSID prefer PSN server B (located in backup DC)
Last but not the least, you could also place PSNs behind a load balancer and that way the traffic would be equally distributed between multiple PSNs. However, the PSN nodes must be Layer 2 adjacent, which is probably not the case if they are located in two different Data Centers
Certificates: Yes, you would want to get a public certificate to service the guest portal. Getting a public/well known certificate would ensure that most devices out there would trust the CA that signed your ISE certificate. For instance, VeriSign, GoDaddy, Entrust are some of the ones out there that would work just fine. On the other hand, if you use a certificate that was signed by your internal CA, then things would be fine for your internal endpoints that trust your internal CA but for any outsiders (Guests, contractors, etc) that do not trust and do not know who your internal CA is would get a certificate error when being redirected to the ISE guest portal. This in general is only a "cosmetic" issue and if the users click "continue" and add your CA as a trusted authority, the guest page would load and the session would work. However, most users out there would not feel safe to proceed and you will most likely get a lot of calls to your helpdesk :)
I hope this helps!
Thank you for rating helpful posts!

Open the same raw file in PS5 with two different White Balance settings

I'm trying to open the same Raw File in PS5 with two different White Balance settings. One setting "as shot" the other in "daylight", then blend them. The tutorial I'm watching says to "stack" the images. The tutorial shows one White Balance setting as the "Background" layer and the other setting as "Layer 1". I don't know how to do this and the tutorial is not specific. Can anyone either point me to a step by step instruction or offer some assistance?

Also look at the "Snapshots" feature of Camera Raw itself. It allows you non-destructively to keep multiple sets of settings for a single raw file.
Learning about it far exceeds the scope of what can be done in this particular forum. I would recommend this book as essential reading:
http://www.amazon.com/Real-World-Camera-Adobe-Photoshop/dp/0321713095/ref=sr_1_1?ie=UTF8&q id=1313502199&sr=8-1
Additionally, there's a dedicated Adobe Camera Raw forum:
http://forums.adobe.com/community/cameraraw
Wo Tai Lao Le
我太老了

How to add two different images on photoshop cs5?

I was learning about the layers and masks and i seen that i have to have two images under each others under the layer option pannel, i tried many times to add images but it always shows in two different pannels as the folloing image I want to add two different images in this pannel to make any changes i want
Thank you.
image

When you click on that icon Photoshop will add a revail all white layer mask and it will be the Photoshop target. Begin painting with black over the image part you wish to hide. Should you paint away something you want change to white paint and paint it back. Lower the brush opacity to fade in and out the image part.
If you use ALT+Click on that icon a hide all black layer mask will be added as the current taget and hide all of the layer paint with whits to show.

Organizing by "time" from two different cameras?

In LR I know one can take say 1000 images that were shot by two different photographers and then adjust or set it to arrange all the images by time taken- thus not file name.
Is there a way to do this in Aperture 3?

Yes.
Or you can arrange them by 10 other criteria, ascending and descending.
Uploaded with plasq's Skitch!
Click on the dropdown.
Regards
TD

Two different radius authentication methods on one guest wlan

I would like to use two different radius servers to one guest wlan.
One radius server is the Cisco NAC guest server, but I would like to use e.g. a RSA SecurID server as the second.
If the user does not exsist on the NAC guest server, the wlc should check the RSA server.
As I understand the servers mentioned under the layer 3 config tab on the wlan configuration tab is doing round-robin.
Is there any way that I can implement this?
Best regards,
Steffen Lindemann

Is there anything on the roadmap for the NAC guest server to use AD as an external database?
It seems like it shouldn't be too difficult since the server is already using AD to map sponsor roles.
We really would prefer to use a single SSID instead separate SSIDs for guest and domain accounts.
Thanks in advance!

Same dimension in two different fact tables

Hi,
I have one same dimension in two different fact tables. I would like to know how BI server choose the fact table when I do a request in this dimension.
I know that is always using the same fact table, but I would like to know why choose this table and not the other.
Thanks

Sorry,
But it doesn't seem to me.
I reorded the tables in the BMM layer and it continues to use the same table, regardless this table is in last.
After, I droped that table in the BMM layer and it continued to use the same.
Thanks for your reply

Photoshop showing two different sizes for same font size

Hi folks,
I've been using Photoshop for a long time, but this problem has popped very rarely along the way and some how remedied itself - I'd like to know this time what's causing it, and how to solve it.
I'm in a Photoshop document, and I'm working with two different text areas. Both area registering as 14px in size in the Type menu, and yet, they're radically different in size. One is tiny, whilst the other is at least twice, maybe thrice the size. Why is this happening?
I've checked there's no overlapping text areas and things like that, everything should be fairly normal, it just isn't.
I'm using Adobe Photoshop CS6 v13.1.2 x64 for Mac, running on a Macbook Pro Retina 1.83ghz and 8GB ram
Thanks in advance

it seems is that in CS6 when you change your font size using free transform - it "remembers" the original pt size when you select the text itself in a certain way:
The Problem
I am writing the text in 50 pt size
I duplicated the document and scaled the text using free transform in 150%
now when I click inside the text more than once and select some of the letters or even just move the indicator more than once
it shows me it is still 50pt which is of course not true.
so as it appears photoshop can occasionally give you the text size before you made a transformation
The Solution
a way to get around that is to click only once and drag through at the same time with the first initial click
now you can see the true font size is 75 pt and not 50 pt.
to contribute to the confusion it appears the font size in the toolbar stays the same "wrong" size so beware of that
and if you want to be really sure you can select just the layer in the layer panel (not the text)
and you will get your "true" font size.
I made the same test in photoshop CC 14.2.1 and it does not act this way but instead it gives you the "true" font size even if you scale it in free transform
and select clicking more than once.
hope this will clarify the matter.

How to make a checkbox hide and show div between two different pages

Hi
I am developing a mobile site application.
Currently I need to make a checkbox effect.
Here is how I want the checkbox to work for me..
I want users to click on the checkbox, for an option on the editor as well as its content on the live mobile to hide.
These are two different files which contains the user interface.(the live mobile file and the editor file)
Now how can I make it possible to make both options hide or show at the same time after a user clicks on the
checkbox to show or hide.
Is it possible for a checkbox created on a different file affects an external file to hide a div within that file?
If so kindly advice me on this.
Thanks in advance

There are several tutorials out there for dissolving a layer, turning text to sand, and similar things. Use any/all of those and then time remap that composition to make the particles form into your word.

Report on two different oracle databses

Hi ,
Please suggest me what is the best way to create a report(RPD work) in obiee as the 2 data sources for report are from two different databases(both are oracle databases)
data sources for report are
Ex : Data source 1(oracle)
DB name: xxx
Schema name:xxx
some tables and columns columns
Data source (oracle)
Db name :yyy
schema name :yyy
some tables and some columns
Thanks,
Kiran

You have multiple options as below
1.In physical layer, start joining data if there are relationships.
2.In BMM layer combine data from different sources: The basis of BMM layer is to resolve these issues and the BI server works amazingly when its properly designed with multiple sources
3. Use a ETL process to combine data from different sources and get them into a single database instance.

Uprezzing film timeline which uses two different codecs

So I have my final film edit in FCP 6 which uses two different codecs...DVCPROHD 720p60 at 23.98fps and HDV 1080p24 at 23.98fps. There are only about 15 clips which are the HDV codec. My next step is to color correct in apple Color. So I did a quick test where I sent a couple clips of each codec, on the same timeline, into Color and back out into FCP, which seemed to roundtrip without any hitches...the only difference is that the DVCPRO clips came back as ProRes 422HQ 1280x720 and the HDV clips came back as 1920x1080...which is all fine. However, I do want 1080p (1920x1080) as my final output...for Bluray as well as DCP if my film gets picked up by a festival. So what I plan to do for my final output is export my completed Colored timeline to compressor and use ProRes 422 HQ at 1080p. My question is...since there isn't a specific 1080p ProRes HQ codec (like there is for DVCPROHD) but simply the "Geometry" tab in Compressor where you can change the 'Dimensions' to 1920x1080...is this how I "Uprez" my DVCPRO 720p clips to match my HDV 1080p clips?
I just want to make sure NOW, that my workflow will be good all the way up to finishing, before I start sending sections of my timeline to Color...
Thanks!
David

OK...you wanted a 1080p final, right? So why shrink the HDV down to 720p, and then blow it back up to 1080p? That's the point of doing both formats separately, and upscaling only the 720p...keeping the HDV at full size. How noticeable will it be? Test to find out. Personally, I'd do it my way.
And yes, upscale AFTER you color correct. As for re-color correcting down the line...why? Color correcting is the final process...do it until it's right...why would you go back? And if you did adjust a couple shots, then just render those back out, and only upscale those and put into that final sequence again. It's a small patch.
>why is it better to send the DVCPRO 720p stuff for upscale BEFORE marrying it with the HDV 1080p stuff.
because the HDV is already 1080. Scaling it down to 720, then back up will be TWO generation losses. Why do that?
>my method of upscaling the 720p with the 1080p stuff at the same time seemed logical to me (the 720p is upscaled while the 1080p stays the same)
But it doesn't...you first will be shrinking it to 720p...then blowing up to 1080p. And HDV is a GOP format without real frames, so the compression really pops when you upscale.
>just want to know WHY your method is better??
Because I tested this out..mixing 720p DVCPRO HD and HDV...and my method gave the best results. Call it "experience."

JPA persistence tier / does two different layers make sense ?

I'm building a little application to illustrate performance issues we are encountering in our production system.
I will create a proof of concept a change we think it will resolve our problems. The change consist in building a specific lighter ejb layer with read only entities only with necessary attributes and relationships into to show data for selection and navigation into the application.
Does make any sense to put all this new ejbs in a different persistence model the one that already exists ?
What is the consequence to have two persistence model instead one for the project ?
My preference is to build two different layers (and related persistence model) and I think it is a good idea to separate the persistence layer because they have two different use, one for showing data and for navigation, one as a really persistence layer.
But i don't know what are the consequences ?

Accessories
Page 32
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview
Attachments:
DevDaysPerformance.ppt ‏1009 KB

Two adjustment layer in two different grups

Similar Messages

Maybe you are looking for