Two airport base stations?

I'm trying to figure out if there's a way to use TWO airport base stations - in order to boost the coverage of the airport network at my home.
I've got some outdoor speakers set up - and they lose signal (as does my iPhone) - and so I'm trying to optimize the overall network.
I'm considering getting another Airport base - and wiring it in to the network - and positioning it on the other side of my home (near the oustide) - so I can improve the signal.
Can TWO base stations be set up on the same network? What settings do I choose?
Thanks,
Vic

Of course there is a way to utilize two airports within the same network..
In the most simple form:
1) Use the same SSID (network name) for both.
2) Assuming you are using one as a router (share an IP, etc), set the second one in bridge mode.
2A) If you have another device as the router, set both to bridge mode, do not have both do NAT as it is very confusing and hard to get to work right.
3) Choose channel 1 for one side and channel 11 for the other.. Channel 6 is also a channel you can use but the wider between channels the better. Do not use the same channel for both or even consecutive channels as they overlap.
I think that should do it.. In general, this is not a problem.. You would want to have the two airports physically separated from each other (opposite side of the house for example).
Good luck.

Similar Messages

  • "AirPort Utility unable to find any AirPort base stations"

    I am getting it, along with a blanked out options panel even as I am using the two AirPort base stations and the Airport Extreme that are installed in my house. This confuses me.
    I get it on my 12" Powerbook with 10.5.2 installed, but not on the one that's still running Panther. I do not get it on the iMac running Panther.
    So does anybody have any idea why my "updated" PB can't see the network it's using? I have had Bonjour and Rendezvous issues in 10.5.2, too, so I am guessing these are all related somehow.
    I have not installed the most recent AirPort Utility because I am afraid it will throw me offline altogether. (Should I?)
    All advice welcome.

    I have the same problem. Two newer macbooks work just fine but an older powerbook that was running fine on the airport extreme now say no airport card installed. Any ideas for a fix?

  • None of my airport base stations are picked up by my mac- what c

    My macbook pro is running OS X Lion 10.7.5 with all updates up to date. I have itunes running 11.0.1. I have two airport base stations and three airport expresses and one of them has speakers comnnected to it. All the airport kit has a green light on it indicating it is connected to the wireless network but airshare does not pick up the speakers. When I open airport utility 6.1 it doesn't find any of the airport base stations or the airport expresses.
    I am assuming that the airport kit needs to be updated with new software but without the mac detecting they are there I don't know how to do this.
    Please can anyone help me.

    OK, so it's a security issue. My guess is that WEP Transitional, which is available in the 802.11n (802.11b/g compatible) setting is not what the PCs want to see.
    They need to probably work with either WEP 40 bit or WEP 128 bit ecryption.
    These settings are not available in the 802.11n (802.11b/g compatible) mode, but they are available in the 802.11 b/g compatible mode. Hold down the option button while you are selecting the Radio Mode and you should see this setting.
    For Security, also hold down the option key while you click on the drop down selection box and you will see more choices. Try 128 bit first to see if that will work. The older PC may need to use WEP 40 bit, so that may be the final setting that will work.
    Unfortunately, you won't be able to connect with your MacPro at "n" speeds in these settings, but it will be the best available compromise.

  • New modem and router. Now my airport base stations don't work

    New moden and router and now I've been unable to get the two airport base stations to work for transmitting the Wi-Fi to other areas of the house

    Ok, if your goal is to use the two AirPort base stations to extend the wireless network provided by the Netgear router using a wireless connection between them, then this won't work as the two are incompatible for this feature.
    However, if you can use wired connections then the three can be reconfigured for a roaming network which basically provides the same thing.

  • My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
    I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
    If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it?

  • Can I set up a WDS network with two main base stations?

    I have an AEBS in the main part of the house and a time capsule in the office in the back of the house, currently with one internet connection (it's cable modem) into to the AEBS. I have tried to use relays (two airport expresses) in a WDS to have the internet connection reach the time capsule, but unfortunately the distance is too great and it won't make it.
    I can move the internet connection and AEBS into the middle of the house and everything would be fine (one internet connection into the house, no need for relays to reach the time capsule), but this requires rewiring the cable connection and adding a power outlet, which seems like a lot of work.
    My other option is to simply have another internet connection hardwired into the office. This would be using the same cable that comes into the house and is split outside. If I go this route--my question is--can I get the time capsule and the AEBS be on the same WDS network (same name, same passwords?), or will I have two separate networks in the house? If it is the former--how do I set it up? Can I have a WDS with two main base stations? Or is there an easier route?
    Thanks the help and advice...

    My other option is to simply have another internet connection hardwired into the office. This would be using the same cable that comes into the house and is split outside. If I go this route--my question is--can I get the time capsule and the AEBS be on the same WDS network (same name, same passwords?), or will I have two separate networks in the house? If it is the former--how do I set it up? Can I have a WDS with two main base stations? Or is there an easier route?
    Just run the Ethernet cable from one of the LAN ports on the AEBS to the WAN port on the Time Capsule. Configure the Time Capsule to operate as a bridge.
    You do not use WDS when they are wired together.
    Then configure the AEBS and Time Capsule to use the same SSID, wireless encryption type/level/password. Have them operate on different channels as far apart as possible.

  • My Airport Base Station does not appear in the Airport Admin Utility

    I cannot see my airport extreme base station in the Airport Admin Utility nor in Airport Setup Assistant via Airport. It worked yesterday but when I was trying to set up a network something must have changed but I don't know what it is. (The setup didn't work so I am only using one base station right now.) The only way I can configure/reconfigure the base station is by physically connecting via an ethernet cable. Then no problem. I have two computers and neither can access the base station with Airport Admin Utility via Airport. I have installed the latest Airport Update but nothing has changed. What happened?

    You should be able to use the second Airport Extreme
    Base Station as a wireless print server. What I
    suggest you do is:
    1. run the Airport Admin Utility and clean up
    settings on your existing Base Station:
    - under the Airport tab, make sure you have not
    selected to "create a closed network"
    - under the Access Control tab, clear out all
    settings
    - under the WDS tab, clear out all settings
    - under the Network tab, make sure the box is checked
    to "Distribute IP addresses" and "Share a single IP
    address using DHCP and NAT".
    - update settings to the Base Station if you changed
    anything.
    2. do a hard reset of your second base station per:
    http://docs.info.apple.com/article.html?artnum=107451
    3. for now, put both base stations and the Mac in the
    same room. Run the Airport Setup Assistant, and use
    its guidance to configure the second base station as
    a new base station that "extends" the wireless
    network of your main base station.
    That should do it.
    Thanks very much. The printer works great from both computers via my second airport base station. And I can see both my base stations in the Airport Admin Utility.

  • Airport Base Station witk PC

    I have an airport base station 2.0. I have several internet users in my home. Two mac laptops, two pc laptops and a desk top pc. They are all wireless. It is difficult for the pc users to maintain a connection with the internet through the hub but the macs have no problem.
    Can anyone tell me why and offer some help?
    P.Hill.

    Any apple computer should be able to connect to the netgear router. What type of error are you getting? I would try turning airport off and on and seeing if the problem persists.
    On a side note, you should avoid using the default router name and password and properly secure it.

  • What is the AirPort Base Station Agent?

    I just noticed in my Login Items on one of two computers (MacPro, no Airport card) there is an Application called AirPort Base Station Agent. It is checked to be invisible on opening. On my laptop (with Airport) that Application is not listed in Login Items. I never put it there myself as I don't know what it's for. It is located in System Folder/Core Services of both computers but only listed as a startup item in one of them.
    Can anyone explain? Should it be added to the laptop login?

    Click here for information.
    (36792)

  • This AirPort base station was unable to extend the wireless network.

    I have an AirPort Extreme in the lounge connected to BT infinity.
    I also have an airport express in the kitchen connected to a stereo system.
    I have had this set up for around 12 months.
    The airport express will not extend the wireless network.
    I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
    This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
    The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
    Can someone please shed some light on this?
    Maybe I have it in a wrong setting or summut....

    G Beach wrote:
    I am also experiencing a recent failure in my Airport devices no longer extending my wireless network. 
    My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
    The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem.  Needless to say, the firmware upgrade did not resolve anything.
    If I didn't know better, I'd have thought I wrote the above. 
    I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since. 
    Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility.  Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
    The latter two started flasing amber and giving the "unable to extend wireless network" error message.
    So I'm wondering if you are similarly using 5Ghz?

  • Mac mini won't recognize airport base station

    Hi,
    I am posting a new thread because I can't find one that is similar to my case. I have a late 2010 Mac Mini. Here is what happened:
    1. Using it this morning to wirelessly print a document. Recieved notice that printer appears off-line.
    2. Re-booted printer, re-started airport base (snow white) , no luck.
    3. Did above again and restarted Mini... no luck
    4. Airport signal indicator suddenly went gray on the bar and notice asking me to join an unrecognized netwok.
    5. restarted Mini... would not recognize my network and Airport Base station
    6. restarted mini and ABS.. still the same gray bars but being prompted to join someone else's network
    7. did no.6, 3-more times... no change
    8. Opened airport utility... does not appear in the scan
    9. opened network preferences and clicked remember network... restarted... same SIGH!
    10. checked system profiler... airport card is on but is "not associated". (Could it be broken but on?)
    11. did no.6 again and also restarted DSL modem... same thing
    12. Turned on my Macbook ABS recognized and was able to print my document through it no problem.
    Until an hour after I turned on my Mini, it was fine.
    All other devices 2 macbooks, 2 windows PCs, iPod Touches and wireless printers work.
    my first instinct was to do a permissions repair but it was taking to long to finish and had to leave... will this help?
    ABS and Mac-mini all have latest updates. frustrated ,have to go to work... PLS HELP.
    thanks

    I'm sure if this is related but I'm also having a problem connecting a pre-2009 mac mini to an Airport base station. I have two others and they are working fine but one will not connect.
    I can see the airport station and get a prompt for my password. When I try it, it times out and cannot connect. Another strange thing is the signal is only showing 2 out of 4 bars. The base station is less than 15 feet away and other devices like my iPhone show a very strong signal. The older mini is only 802.11g so I have left the multicast rate on the base station at 2.2 which I believe is the default.
    I had been using an 802.11n USB adaptor but I wanted to go back to the internal wifi because the USB adaptor would disconnect whenever the computer went to sleep. I have the mini connected as a media center on a tv so having to always log again was getting frustrating.
    I may try a clean install again, but the machine was just formatted and updated with a clean 10.6 about 2 months ago. I didn't install much beyond eyeTV and a few FrontRow plugins. Any ideas on how to debug wifi problems?

  • Macbook OSX 10.6.8 pro wont connect to airport base station anymore

    all other machines have  no problems.  It worked earlier in the day-put to sleep-came back- now it can't something is wrong with network settings but nothing changed.  Two PC's are connected to same cable/Airport base station wirelessly with no issues it's just my machine.  I've rebooted a few times-that didn't help.  i can get my macbook's airport to work with my wireless aircard so it's not my the internal wireless modem, it's got to be my wireless settings for the airport basestation itself-but nothing chagned in those few hours it was asleep?  I have been having issues for a few weeks requiring that I run diagnosis on this home wireless network connection, but it usually gets resolved and coems back on-now it seems gone.
    Does anyone have any suggestions?  I am not sure if it helps but it looks, when I renew the DHP, nothing is in the router section. 
    (not that technically savvy-but usually can wing it if the directions are too bad).
    This is running OSX 10.6.8
    Thanks,
    Megan

    Your System Preferences > Network > TCP/IP  should be set as follows
    IPv4 - DHCP
    IPv6 - off (for now, you might have to enable it in the future, but it can be off for now)
    There is nothing in the DHCP Client ID box as it's not required.
    If your clicking the "renew lease" likely means your date and time on the computer is wrong.
    Go to System Preferences > Date and Time and set a time zone and in the first screen, set the date and time automatically. then reboot the computer.
    If your having  problems with your computer remembering the date and time,
    perform a PRAM reset
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
    If your still having problems with your machine holding the date and time, not keep ing your System Preferences changes after a reboot, then open your
    Users/Library/Preferences folder and look for a file called
    com.apple.systempreferences.plist
    and move it to the Desktop, reboot the computer and try to set the date and time again, reboot to see if it works remmebering your system preferneces changes, if it does, then delete the desktop file.
    If your still having trouble after that, create a new user account and log into it, see if the problem still continues.

  • Trying to connect an XBOX 360 to my airport base station via  ethernet cabl

    Hello,
    I have the older snow airport base station and was trying to connect my xbox 360 to it via an ethernet port. There are only 2 ethernet ports on the snow base station. one is being used by the cable coming from my dsl modem. the other free port i tried plugging into my xbox 360 to no avail. the xbox cant get an ip address. the open ethernet port on the base station is labeled with the circle logo. the one being used by my dsl modem has the two outer pointing arrows. I turned off the airport to my macbook and tried to connect my macbook to that port my xbox was in and it would not connect to the net either. Is it possible, i have the ports backwards. my wireless internet for all 3 mac computers works fine. Any help would be greatly appreciated!!!!
    Thanks!!!
    Vinny

    Yes, you have the ports connected backwards.
    The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
    The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
    See Apple's article AirPort Base Station: About the WAN and LAN Ports
    What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart.

  • Connect to Internet Without Airport Base Station or Other Wireless Router

    I have an iMac G5 w/Airport Extreme card, an eMac w/Airport card (not Extreme), and an iBook w/Airport card (not extreme). The iMac is connected to the internet via DSL (direct Ethernet connection - no router). I can succesfully network all three computers for file sharing but can not connect to the internet over the network using the eMac or the iBook. Is it even possible to use the iMac as a wireless base station for the other two computers or do I have to buy a wireless router or Airport Base Station?
    Thanks.
    iMac G5   Mac OS X (10.4.5)   eMac 10.3.9, iBook 10.3.9

    no1bass, Welcome to the discussion area!
    The best solution is to get an inexpensive wireless base station.
    However, you can use the iMac to share the Internet connection. Go to the iMac's Sharing preference pane and enable Internet Sharing. If you have the iMac's firewall enabled, you will need to also enable Web Sharing or otherwise configure the firewall to open the correct ports.

  • If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

    I operate an old airport extreme base station 802.11n (3rd gen).
    There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
    I get a sense that the iphones may/will be useless the new airport.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    Thank you.  

    I get a sense that the iphones may/will be useless the new airport
    They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

Maybe you are looking for