Two Albums from the same band not on import
I have two bands, The Doors and Rush, that I have double albums on itunes. I have both double albums for each artist on albums" but when I go under "artists" there's only one of the two albums listed.
How do I get both albums listed together under "artists" on my iphone?
Generally setting a common Album title and Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2
Similar Messages
-
So basically I want what it says in the title. I want to be able to listen to the full album as a continuous loop without it skipping the one song I downloaded from the EP. I can't delete then download the song from the album (I tried and it wont let me).
Generally setting a common Album title and Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2 -
How do you stop your phone from creating two albums with the same photos after syncing?
When I first bought my phone I was able to sync my photos by checking the folder I wanted synced under iTunes. This put all those photos on photo library on my phone. I recently added more photos to that folder and tried to sync them it now put them in the photo library album and also created another album with my folder name. So I have two albums with the same photos. I tried in checking that folder in iTunes and of course they're not in my photo library. Please help. I don't want two albums with the same pics
This is how Apple has always handled photos. nothing has changed at all.
Just as your music is in your library and you can access those exact same songs from a playlist, all of your synced pics are in the Photo Library and those exact same photos (NOT duplicates) can be accessed from the album name that you chose to sync. -
Is there a way to view earlier messages in a thread without going through each day? Also, can you make a photo album from the same text thread without going back to the beginning?
Turn Settings > General > Accessibility > Zoom to ON.
-
How do I get iTunes to play all the songs and albums from the same artist?
Before the update, you used to be able to play all the songs from the same artist across all albums (ie: you have 2 albums from the same artist, you start one, it would play through both in order). Why did this change, and is there some way to get it to work?
Have you read the link that roaminggnome posted ? What you can redownload will depend upon what country that you are in (music, films, TV shows can't be redownloaded in all ; audiobooks and ringtones are one-time only downloads), whether the item is still in your country's store (content providers occasionally remove them), and whether you've moved countries since buying/downloading them.
-
Compare two results from the same table
i have two results from the same table that i would like to compare. below is my query and the results i want to compare
SELECT tblItemRoutingBOM.ItemRevID, tblItem.ItemID, tblItem.PartNum, tblItem.ItemName, tblItem.ManufacturerPartNum AS [Mfg Part#], tblItemRoutingBOM.Quantity
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
WHERE tblItemRoutingBOM.ItemRevID in (61,70)
as you can see i am returning two records using the where clause
ItemRevID, ItemID, PartNum, ItemName, Manufacturer, Mfg Part#, Quantity
61,121,331503,.233 Aluminum Sheet,,1
70,121,331503,.233 Aluminum Sheet,,3
now what i am looking for is to combine these two together into one row with the following added. two columns for each QTY, QTY1 = 1 and QTY2 = 3 with a third column added that is the difference between the two QTY Diff = 2
Any thoughts?Here are the two statements that i want to combine, results for each are attached
SELECT tblItem.ItemID, Sum(tblItemRoutingBOM.Quantity) AS SumOfQuantity, tblItem.PartNum AS [Part #],
tblItem.ItemName, tblManufacturer.ManufacturerName AS Manufacturer, tblItem.ManufacturerPartNum AS [Mfg Part#]
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
INNER JOIN tblUnits ON tblItem.UnitID = tblUnits.UnitID
LEFT JOIN tblManufacturer ON tblItem.ManufacturerID = tblManufacturer.ManufacturerID
WHERE tblItemRoutingBOM.ItemRevID=61
GROUP BY tblItem.ItemID,tblItem.PartNum,tblItem.ItemName,tblManufacturer.ManufacturerName,tblItem.ManufacturerPartNum
SELECT tblItem.ItemID, Sum(tblItemRoutingBOM.Quantity) AS Quantity, tblItem.PartNum AS [Part #],
tblItem.ItemName, tblManufacturer.ManufacturerName AS Manufacturer, tblItem.ManufacturerPartNum AS [Mfg Part#]
FROM tblItemRouting
INNER JOIN tblItemRoutingBOM ON tblItemRouting.ItemRoutingID = tblItemRoutingBOM.ItemRoutingID
INNER JOIN tblItem ON tblItemRoutingBOM.ItemID = tblItem.ItemID
INNER JOIN tblUnits ON tblItem.UnitID = tblUnits.UnitID
LEFT JOIN tblManufacturer ON tblItem.ManufacturerID = tblManufacturer.ManufacturerID
WHERE tblItemRoutingBOM.ItemRevID=70
GROUP BY tblItem.ItemID,tblItem.PartNum,tblItem.ItemName,tblManufacturer.ManufacturerName,tblItem.ManufacturerPartNum
114,11,55002,Pepsi Blue Cap,NULL,
117,5,331501,Marigold Yellow For ABS,NULL,
121,1,331503,.233 Aluminum Sheet,NULL,
125,2,331504,Velvet Vinyl .008,NULL,
114,33,55002,Pepsi Blue Cap,NULL,
117,15,331501,Marigold Yellow For ABS,NULL,
121,3,331503,.233 Aluminum Sheet,NULL,
125,6,331504,Velvet Vinyl .008,NULL,
my returned result should combine above with two extra columns (two extra columns because i have two results to combine)
114, 11, 33, 22, 55002, Pepsi Blue Cap, NULL,
117, 5, 15, 10, 331501, Marigold Yellow For ABS, NULL
121,1, 3, 2, 331503, .233 Aluminum Sheet, NULL
125, 2, 6, 4, 331504, Velvet Vinyl .008, NULL
Columns go as such, ID, QTY1 (for 61), QTY2 (for 70), Diff (QTY1-QTY2), PartNum, ItemName, Mfg, Mfg Part#
IF the results from one of those two are empty then i would see something like this
114, 11, 0, 11, 55002, Pepsi Blue Cap, NULL,
117, 5, 0, 5, 331501, Marigold Yellow For ABS, NULL
121,1, 0, 1, 331503, .233 Aluminum Sheet, NULL
125, 2, 0, 2, 331504, Velvet Vinyl .008, NULL -
Compare two members from the same dimension in HFR
Hi,
Is it possibe to compare two members from the same dimension in HFR? The requirement is to compare Year and Week members from the same dimension. The Week date will be selected from POV. The corresponding Year date should be displayed in the report. Week dates are in the format W2008-03-07 and Year dates are in YTD2008-03-07.
The dates are same except the preceding character.I am unable to compare these two. In my understanding there's no substring or replace functions in HFR.
Kindly help. Thanks in advance.
Regards,
UmaHi,
How is your database structured? it may be possible to use the 'RelativeMember' function if it will always be the same number of steps between the 'W' member and the 'YTD' member, e.g. if your hierarchy is something like:
Time
.Weeks
..W2008-03-07
..W2008-03-10 etc.. for 52 weeks
.YTD
..YTD2008-03-07
..YTD2008-03-10 etc.. for 52 weeks
In your report select 'Current Point of View for Time' in one row/column and in the other use:
RelativeMember set up as follows:
Member: Current Point of View for Time
Offset: 52
Hierarchy: Time
RelativeMemberList: Lev0, Time
UseFirstDescendant: leave unselected
Hope this helps
StuartGame
www.analitica.co.uk -
Can we buy two albums at the same time ?
Can we buy two albums at the same time ?
If by 'two' you mean different, 'albums' you mean books and 'at the same time' you mean in the same order, no. You can order multiple copies of the same book in one order, but different books require different orders.
Regards
TD -
I got two receipts from the same tv show I bought. How's that even possible? I clicked the 'buy season ' button the first time and there was an error so I clicked it again, and now, I apparently paid for it twice! Apple is such a rip-off!
Wow.
Over react much?
Check your purchase history. See if it actually charged you twice.
If it did then contact itunes support for a refund.
No need be so over dramatic. -
Can I run two PIDs from the same vi?
Hi
I want to control speed of the rotating shaft and force applied by the pneumatic cylinder using two different PIDs from the same program.
I managed to get two PIDs to work separatly using PID control loop VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is no overshoot). When I try to run both PIDs within my vi they don`t work. I again tried various gains and managed to get one PID to work but not the other. Then through trial and error I managed to get a second PID to work but I had to change refresh time of the FOR loop from 100msec to 1msec.
Does anyone have experience with running two PIDs in the same program? Does the timing of the FOR loop influence PID contorller? Does equiring of other data while run
ning PID has effect on the PID?
I would really appreciate any comments/help. I am pretty thrustrated at this time
Thanks"The timing of the FOR loop will influence your PID control, which is a fundamental part of PID control. Acquiring data doesn't affect the PID although it could affect the timing of the loops. For instance if you only have one DAQ card you would want to have it all in one loop because you can not have two AI sessions open to the same card.
For more detailed information on PID I would recommend reading the "PID Control Toolset
User Manual" which should have been installed to your machine but can also be found at : PID Control Toolset User Manual"
Regards,
JR A.
Application Engineer
National Instruments -
How can I get rec'd text messages from the same subscriber not be appended
Hi,
Is there a way to configure the Apple iphone so that text messages from the same subscriber are displayed separately rather than appended to each other? In this way accidentally deleting one message wouldn't delete the entire history of messages from this subscriber.
When I launch the SMS service by pressing the green SMS button I am met by a screen that says Text Messages. On the left of this there is a button that says Edit and on the right there is one that is for writing a new message. Down the page are my messages all grouped by the originator of each messages. If I choose one I see that all messages from this source are present appended one after the other. There is also the option now to Clear on the top right hand corner. It is this Clear option I am worried about. If I choose Clear I am asked for a confirmation and then lo and behold as expected all my messages from this subscriber are deleted.
This is a work phone for support purposes and most of the texts will be from the telephone operator (i.e. the one same number) saying we have an email waiting to be read with a subject title giving a little description. I want to be in a position so that I don't accidentally delete the entire history of messages, say some evening when I'm tired or Monday morning if I 'm a bit asleep. Ideally I would prefer that each text message would stand alone in the Text Messages window irrespective of the originator and not be appended in a group fashion. Is there a way to do this?
Kind regards,
MThere is no way to do that on the iPhone. Messages will always be grouped into a 'conversation' based on the sender/recipient. Only Apple can change that behavior.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html. -
How to compare two fields from the same table in the select statement
Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
RegardsHi ,
it will not return any value when you are using column of same table
such as Date Field , Because while Using Aggregate Function it will not check with self column
. For that you have to take data in one internal table and then you can work on it .
And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
include structure aufk .
types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak. -
Duplicate Contacts After Syncing Two iPhones from the Same iTunes
My husband and I each have an iPhone that we sync from the same iTunes account. We sync our Yahoo contacts as well. Following the upgrade yesterday, we each now have each other's Yahoo contacts (as well as our own) showing up on our iPhones. Any ideas on how to fix this?
Go to Settings>Messages>Send and Receive at>You can be reached for iMessages at. Uncheck the phone number that you don't want to use and check/select the number that you do want to use on each phone.
-
An example would be Jackson Browne's "The Load Out" &" Stay".They should play one after the other but in a play
list on shuffle setting they don't. How do I combine two songs so they play as one in a shuffled playlistFriveros wrote:
When I import my music files to iTunes will I be creating new files for every file I import? If the answer is YES; where are those files going to be stored and how much space will they use?
To begin with you can't manage FLAC in iTunes. The use of iTunes is at this moment limited to WAV, AIFF, Apple Lossless, AAC and MP3. But that's not a problem because if I understand you correctly you want to organize the MP3-files in iTunes.
When you import music files you can let iTunes copy all files and put it in an iTunes-media-Folder. You can make the choice in preferences-->tab advanced.
If you deselect the second blue checkbox (sorry, in Dutch) iTunes won't copy files as you import the files in your library. It will use the files from the place they are on the disk now. So you have a choice. But if you want iTunes to copy them, they will be placed in a folder called iTunesMedia. This is how it placed on your disk.
All files will be put in one music folder well ordered by artist and albums. If you want to make a backup of all your music you just have to copy the iTunes folder to another disk. You can backup all music at once. How much space they will use depends on the bitrate of the MP3 and whether you add more tagging to it. You can have iTunes add album artwork. That means adding gif or jpg files to your library. Are you using bitrate 320 for your MP3?
If you tell me I can give you estimates on the disk-space you will need. -
How can two networks from the same router be showing up at once?
Very confused here. I hooked up the linksys wrt54g and obviously it showed up as an available network. It is hard wired into one computer.
I then (on an unwired computer) went into the router to rename the network and reset the password.
Now, when I check for available networks, both are present (linksys and the renamed one)? How can this be?
Also, the linksys network has five bars connectivity and the new one I renamed only has two. How is that possible?
Thanks1. Always configure your router from a wired connection. Never through a wireless connection. The wired connection is the only reliable way to be sure your configure your router and not a different one.
2. Vista and Windows 7 allow you to name a wireless connection different then the "SSID" used on the router. It also allows you to set up two wireless connections using the same SSID. Clean up the list of preferred networks on your computer. That should take care of this.
Maybe you are looking for
-
Bootstrap error (exitcode = 66) in BI Java Refresh
Hi All, I am working on a BI Java system refresh issue and the system isn't starting up soon after DB swap. Following please find more details on this. The OS is RHEL, Linux and database is Oracle 10.2.0.2. SAP system is BI Java 7.0. I am not able to
-
Hi Guys, I am trying to schedule a compress job from the compress section of an infocube, but I am getting an error saying that a job with this name already exists. I have tried to find it in SM37 but to no avail. Somebody please help me as to
-
Hello Experts, Is there a way to run a report by purchasing group? The report should output at a minimum: PO # Vendor Name Line Item Number Line Item $ Value Line Item $ Actual (Invoiced) Value Charge Number (WBS) Performance key input or ME2N almos
-
Zoo Tycoon cannot be played from a locked or write-protected volume
I just got my new iMac and set-up user accounts for each kid. I'm the admin. I installed Zoo Tycoon on my account by putting it into the Applications folder. The kids can get to it but can't play it. Error message is in the subject line. I used "Get
-
Selecting single value using for all entries.
Hi Experts, I want to know that is it possible to fetch only the first record for a particular condition while using for all entries. For ex: Suppose i got 10 different vbeln from vbak table into my internal table it_vbak. For a particular vbeln ther