Two ALV Grids in a single screen are overlapping eachother
Hi,
I have created two ALV grids in a single screen. I have used seperate containers for them.
But on executing them , both the ALV grids are overlapping eachother.
Please give me a solution.
Hi,
IF w_custom_container IS INITIAL.
Creating Object for the Custom Container.
CREATE OBJECT w_custom_container
EXPORTING
container_name = w_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CASE sy-subrc.
WHEN 1.
MESSAGE e054. "CNTL ERROR
WHEN 2.
MESSAGE e055. "CNTL SYSTEM ERROR
WHEN 3.
MESSAGE e056. "CREATE ERROR
WHEN 4.
MESSAGE e057. "LIFETIME ERROR
WHEN 5.
MESSAGE e058. "LIFETIME DYNPRO DYNPRO LINK
ENDCASE.
Creating object for the Splitter Container.
CREATE OBJECT w_split_container
EXPORTING
parent = w_custom_container
orientation = 0
sash_position = 30
with_border = 2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 1.
MESSAGE e054. "CNTL_ERROR
WHEN 2.
MESSAGE e055. "CNTL_SYSTEM_ERROR
ENDCASE.
Creating Grid Control.
CREATE OBJECT w_grid1
EXPORTING
i_parent = w_split_container->top_left_container.
CREATE OBJECT w_grid2
EXPORTING
i_parent = w_split_container->bottom_right_container.
Building field catalog for ALV.
Fieldcat for the Detail Record.
PERFORM build_fieldcat USING: c_1 c_code c_output c_check
c_comcode c_olength,
c_2 c_fileno c_output c_check
c_filenum c_olength,
c_3 c_dedcod c_output c_check
c_dedcode c_olength,
c_4 c_dedfac c_output c_check
c_dedf c_olength.
FieldCatlog for the Error Records.
PERFORM build_fieldcat_error USING: c_1 c_pernr c_error c_check
c_person c_olength,
c_2 c_desc c_error c_check
c_descp c_olength.
ALV Display.
CALL METHOD w_grid1->set_table_for_first_display
EXPORTING
i_buffer_active =
i_bypassing_buffer =
i_consistency_check =
i_structure_name =
is_variant =
i_save =
i_default = 'X'
is_layout =
is_print =
it_special_groups =
it_toolbar_excluding =
it_hyperlink =
it_alv_graphics =
it_except_qinfo =
ir_salv_adapter =
CHANGING
it_outtab = t_error
it_fieldcatalog = t_fieldcat_error
it_sort =
it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
CASE sy-subrc.
WHEN 1.
MESSAGE e076. "invalid parameter combination
WHEN 2.
MESSAGE e001. "program error
WHEN 3.
MESSAGE e078. "too many lines
ENDCASE.
CALL METHOD w_grid2->set_table_for_first_display
EXPORTING
i_buffer_active =
i_bypassing_buffer =
i_consistency_check =
i_structure_name =
is_variant =
i_save =
i_default = 'X'
is_layout =
is_print =
it_special_groups =
it_toolbar_excluding =
it_hyperlink =
it_alv_graphics =
it_except_qinfo =
ir_salv_adapter =
CHANGING
it_outtab = t_output
it_fieldcatalog = t_fieldcat
it_sort =
it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
CASE sy-subrc.
WHEN 1.
MESSAGE e076. "invalid parameter combination
WHEN 2.
MESSAGE e001. "program error
WHEN 3.
MESSAGE e078. "too many lines
ENDCASE.
ELSE.
CALL METHOD w_grid1->refresh_table_display
EXPORTING
i_soft_refresh = 'X'.
CALL METHOD w_grid2->refresh_table_display
EXPORTING
i_soft_refresh = 'X'.
ENDIF.
Hope it Helps,
Jayant Sahu.
Similar Messages
-
Two AlV Grids in a single screen
I want to bring two ALV GRIDS in a single report output screen.How can i achieve this through Classical coding( not OBJECT ORIENTED ). If possible please provide with codes.
thanks,
VenkatHello Venkat
I agree that using fm's this is an almost impossible task whereas using OO-based ALV lists it is just a piece of cake.
For a sample have a look at report ZUS_SDN_TWO_ALV_GRIDS in thread alv
or report ZUS_SDN_THREE_ALV_GRIDS in thread Alv
Regards
Uwe -
Need to display two ALV GRIDs in a single screen
Hi,
I have a question, i'm using version 4.6. I want to display 2 ALVs in a single screen or by calling.
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 : Display In a single report
ALV1 report (Editable ,Has to be a GRID)
ALV2 report (Non Editable, Has to be a GRID)
(or)
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 :
ALV1 report (Editable ,Has to be a GRID, with a custom button to call ALV2 hiding the ALV1 ie not visible to user)
ALV2 report (Non Editable ,Has to be a GRID, with a custom button to call ALV1 hiding the ALV2 ie not visible to user)
Please help me <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada GalindoHi
ABAP List Viewer
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Regards
Anji -
Multiple ALV Grid Panes in single screen
Hi all,
How can we get multiple ALV Grid panes in single output.
Is it possible to get the same without using OOPS.
Thanks in advance.
EswarHi,
You can do this by creating 2 custom controls on the layout of the screen, and then you will also need to create 2 custom containers in your ABAP program, 1 for each ALV.
Ex :
grid TYPE REF TO cl_gui_alv_grid,
custom_container TYPE REF TO cl_gui_custom_container,
grid TYPE REF TO cl_gui_alv_grid,
custom_container TYPE REF TO cl_gui_custom_container,
regards,
Advait -
How to use two ALV grids in a single program (pl read below for details)?
Please read thoroughly::
I have an ALV report using REUSE_ALV_GRID_DISPLAY.
On the output of this report, when I click on a "change" button, a couple of columns should be made editable.
I achieved this by modifying the fieldcatalog and triggering the output with another REUSE_ALV_GRID_DISPLAY.
When I click on the back button of this second report, it is still taking me to the first one.
How to over come this?
Note:
I used custom containers etc but the default buttons on the container are not controllable. I added custom buttons but could not suppress the default ones. So I did not pursue this much even though this is more comfortable to use.
I am not able to get into the code in debug to see how the default buttons like COPY, INSERT ROW etc are working.
Can any body throw some inputs into this?
Thanks,
Ven.>I achieved this by modifying the fieldcatalog and triggering the >output with another REUSE_ALV_GRID_DISPLAY.
>When I click on the back button of this second report, it is still >taking me to the first one.
>How to over come this?
For this there is a solution
i am thinking you are using user_command and calling the second time ALV Grid if so check this.
form user_command using r_ucomm type sy-ucomm selfield type slis_selfield.
case r_ucomm.
when 'CHANGE'.
selfield-exit = 'X'. "use this , this will solve the problem
"i hope you are calling the Function here
endform. -
How can I get the selected rows from two ALV grids at the same time?
I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu -
Report with two ALV grids and a header
Hi experts,
I have a report with two ALV grids in the same screen, each one in a separated container. The information displays it correctly. The report has been implemented by using OO Programming.
My real trouble is in the header. It must have a logo, a title with a specific font and other information.
I'll attach a capture of my need:
[Report with two ALV grids and a header|http://picasaweb.google.com/lh/photo/AcQD49QPmm-0L_jL2iMedA?feat=directlink]
Then, I want to set up the header you can see, with logo, a font with specific features. Obviously, the header you see has taken from another report. But is the same idea.
I've tried with a third container, using the CL_GUI_CONTAINER and CL_GUI_CONTAINER classes, but it doesn't work.
Any idea? Would welcome any help you can provide.
Thanks in advance,
Jorge RojasHi, Jorge.
Should the header be a"attached" to any of the ALV? Or it should be carried alone?
If first applies, you've given the solution yourself: put the info & logo in first ALV's header and invoke it from the proper method.
You could use CL_GUI_DOCKING_CONTAINER CLASS to divide screen in several containers and then, in the upper one, I would create another one docking container to divide the screen into two: the written info could be performed with an HTML viewer class and the logo with a CL_GUI_PICTURE element.
Cheers. -
Create blank screen space between two ALV grids
I want to create some blank screen space between the two ALV grids I have on the screen. Can someone tell me how to do this?
Thanks and best regards,
SandyYou don't have link the two containers.
I guess you have a grid and tree control that you want to display. So, use a different container for each of these controls, so that they appear differently.
If you don't want space in between them, you can have one container and split that into and display the tree and grid in each of the split portions.
The advantage with this will be you can resize the tree/grids using the vertical line that separates them.
Take a look at WE02 transaction to see what I am trying to explain.
Regards,
Ravi -
How to give a page break in alv grid display after 65 lines are displayed?
hi all,
I need to give a page break in alv grid display after 65 lines are displayed on each page...Please help me with this...hai
give this command beging of the report name... u have to diclar the beging of the report ......
<b>report</b> ( name of the report) <b>standard page heading line-size 200 line-count 65.</b>
ex1.:- report name is rtpm_trl_show_flows
report <b>rtpm_trl_show_flows </b> no standard page heading line-size 200
line-count 65.
ex:2
report <b>zlpur01</b> no standard page heading line-size 200
line-count 65.
type-pools: slis.
tables: bkpf.
selection-screen begin of block sel with frame title text-001.
select-options: s_comp for bkpf-bukrs, " Company
s_valut for bkpf-budat. " Invoice Date
S_MTART FOR MARA-MTART. " Material Type
selection-screen end of block sel.
parameters: p_vari like disvariant-variant. " ALV Variant
constants: formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
data: i_bseg type bseg occurs 0 with header line.
data: vatval type p decimals 2 value '0.15'.
data: xhkont type string value '154000'.
data COM type c.
data: begin of invt occurs 100,
budat like bkpf-budat, " Inv Dat
bukrs like bkpf-bukrs, " Material
STCEG like bsak-STCEG, "name of the companycode
belnr like bkpf-belnr,
xblnr like bkpf-xblnr, " Inv Reference
ebeln like rseg-ebeln, " PO number
lifnr like bseg-lifnr, " Vendor No
name1 like lfa1-name1, " Supplier Name
matnr like bseg-matnr,
maktx like makt-maktx,
stcd1 like lfa1-stcd1, " Supplier VAT REG NO
xamt like bseg-dmbtr, " TAX amt
yamt like bseg-wrbtr,
wrbtr like bseg-wrbtr, " Base amount
mwskz like bseg-mwskz,
dmbtr like bseg-dmbtr, " TAX amt
gjahr like bkpf-gjahr,
hkont like bseg-hkont,
zamt like bseg-dmbtr, " TAX amt
wamt like bseg-dmbtr,
shkzg like bseg-shkzg,
shkzg1 like bseg-shkzg,
end of invt.
regard
nawa -
Can we have two alv grid in the output
Hi
Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
Regards
Raj>
Rajitha1234 wrote:
> Hi
>
> Can we have two alv grid in the output?. If yes how can we do that using oops alv. I think first need to create the container on that two subscreen. is this correct? Thanks.
>
> Regards
> Raj
Hi Rajitha,
You can have as many as ALV output in the screen By using OOPS.
By using Container you can pass ALV output.
see the sample Program SALV_TEST_TABLE.
Regards,
Prabhudas -
HI All,
Is it possible to add twl grids in single page output?
Regards,
Krishna.Hi,
i thing it can't. Anyway i am sending model alv grid report.
REPORT CODING
REPORT YMS_EXDET MESSAGE-ID E4 NO STANDARD PAGE HEADING LINE-SIZE 350.
*REPORT ZMM_EXIN_DOC_ALV_HEADER .
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART1, " Excise part I detials
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
SERIALNO LIKE J_1IPART1-SERIALNO,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
STATUS LIKE J_1IEXCHDR-STATUS, "CHALLAN STATUS
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
SERIALNO LIKE J_1IPART1-SERIALNO,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
EXGRP LIKE J_1IEXCDTL-EXGRP,
RDOC1 LIKE J_1IEXCDTL-RDOC1,
STATUS LIKE J_1IEXCDTL-STATUS, "CHALLAN STATUS
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART1-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART1 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART1-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART1
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO'.
AND BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
STATUS NE ' ' AND
STATUS EQ ' ' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
EXDAT IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
*******************SPD****************
SELECT * INTO CORRESPONDING FIELDS OF IT_CDTL FROM J_1IEXCDTL WHERE
TRNTYP = 'GRPO' AND WERKS = WERKS AND
EXDAT IN BUDAT AND STATUS NE 'B'.
SELECT SINGLE * FROM J_1IPART1 WHERE DOCNO = IT_CDTL-DOCNO AND
DOCYR = IT_CDTL-DOCYR AND
REGTYP = REGTYP_1.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM J_1IPART2 WHERE DOCNO = IT_CDTL-DOCNO AND
DOCYR = IT_CDTL-DOCYR.
IF SY-SUBRC NE 0.
IT_CDTL-SERIALNO = J_1IPART1-SERIALNO.
APPEND IT_CDTL.
ENDIF.
ENDIF.
ENDSELECT.
***************SPD********************
SELECT BDOCNO BDOCYR BEXNUM BEXDAT BWERKS BEXBED B~EXCCD
B~ECS
B~STATUS
A~SERIALNO
FROM J_1IPART1 AS A INNER JOIN J_1IEXCHDR AS B
ON ADOCYR = BDOCYR AND ADOCNO = BDOCNO INTO CORRESPONDING
FIELDS OF TABLE IT_CHDR WHERE B~TRNTYP = 'GRPO' AND
BWERKS = WERKS AND BEXDAT IN BUDAT AND
B~STATUS = ' ' AND
B~STATUS = 'C' AND
A~REGTYP = REGTYP_1.
SORT IT_PART2 BY SERIALNO.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
STATUS EQ ' ' AND
STATUS EQ 'C' AND
STATUS NE 'P' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
CLEAR IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
MODIFY IT_CDTL INDEX SY-TABIX.
CLEAR IT_CDTL.
ENDLOOP.
*****spd change**********
*LOOP AT IT_CDTL.
*SELECT SINGLE * FROM J_1IPART2 WHERE DOCNO = IT_CDTL-DOCNO AND
DOCYR = IT_CDTL-DOCYR.
*IF SY-SUBRC = 0.
DELETE IT_CDTL INDEX SY-TABIX.
*ENDIF.
*ENDLOOP.
**SELECT
*******spd ****************
SORT IT_CDTL BY EXNUM EXDAT.
DELETE ADJACENT DUPLICATES FROM IT_CDTL COMPARING MATNR EXNUM EXDAT.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM DOCNO =
IT_CDTL-DOCNO.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART EQ '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-SERIALNO = IT_CHDR-SERIALNO.
IT_OUT-SERIALNO = IT_CDTL-SERIALNO.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'SERIAL NO.'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 18.
AFIELD-FIELDNAME = 'PO NO'.
AFIELD-SELTEXT_L = 'PURDOCNO'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
Thanks,
Shankar -
Two ALV Grid Display format on the Single page
Hi guru's
I have two plant details. I want to be display these two plant details in the single page with ALV Grid display format.. like
plant no 1(Details):
xxxx xxxx xxxx xxxx with ALV Grid Display format
plant no 2 (Details):
xxx xxxx xxxx xxxx ALV Grid Display format
Can any body help on the .. if you have sample code pls paste.
Thanks in Advance
Surendrahi,
Grid display is not possible but u can display two list on same page by Block ALV....
TYPE-POOLS : slis.
TABLES : mara,
makt.
SELECT-OPTIONS : mat FOR mara-matnr.
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE mara-matnr,
maktx LIKE makt-maktx,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
mtart LIKE mara-mtart,
count TYPE i,
END OF itab1.
DATA : BEGIN OF itab1_col OCCURS 0,
mtart LIKE mara-mtart,
count TYPE i,
END OF itab1_col.
DATA : t_fcat1 TYPE slis_t_fieldcat_alv,
t_fcat2 TYPE slis_t_fieldcat_alv,
wa_fcat TYPE slis_fieldcat_alv,
t_eve TYPE slis_t_event,
wa_eve TYPE slis_alv_event,
t_layout TYPE slis_layout_alv.
DATA : v_repid LIKE sy-repid,
t_mat LIKE mara-matnr.
DEFINE create_fcat.
clear wa_fcat.
wa_fcat-fieldname = &1.
wa_fcat-seltext_l = &2.
wa_fcat-outputlen = &3.
append wa_fcat to t_fcat1.
END-OF-DEFINITION.
START-OF-SELECTION.
PERFORM get_data.
PERFORM dis_data.
*& Form get_data
text
FORM get_data.
SELECT amatnr bmaktx amtart amatkl INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara AS a INNER JOIN makt AS b ON
amatnr = bmatnr
WHERE a~matnr IN mat.
LOOP AT itab.
itab1-mtart = itab-mtart.
itab1-count = 1.
APPEND itab1.
ENDLOOP.
SORT itab1 BY mtart.
LOOP AT itab1.
MOVE-CORRESPONDING itab1 TO itab1_col.
COLLECT itab1_col.
ENDLOOP.
ENDFORM. "get_data
*& Form dis_data
text
FORM dis_data.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = v_repid.
REFRESH t_fcat1.
CLEAR t_fcat1.
REFRESH t_eve.
wa_eve-name = 'TOP_OF_PAGE'.
wa_eve-form = 'TOP_OF_PAGE1'.
APPEND wa_eve TO t_eve.
create_fcat:
'MATNR' 'Material' '10',
'MAKTX' 'Material Description' '40',
'MTART' 'Type' '10',
'MATKL' 'Group' '10'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = t_layout
it_fieldcat = t_fcat1
i_tabname = 'ITAB'
it_events = t_eve
TABLES
t_outtab = itab.
REFRESH t_fcat1.
CLEAR t_fcat1.
REFRESH t_eve.
wa_eve-name = 'TOP_OF_PAGE'.
wa_eve-form = 'TOP_OF_PAGE2'.
APPEND wa_eve TO t_eve.
create_fcat:
'MTART' 'Type' '10',
'COUNT' 'Total' '5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = t_layout
it_fieldcat = t_fcat1
i_tabname = 'ITAB1_COL'
it_events = t_eve
TABLES
t_outtab = itab1_col.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
ENDFORM. "dis_data
*& Form top_of_page1
text
FORM top_of_page1.
FORMAT COLOR COL_POSITIVE.
WRITE:/ 'First Block'.
FORMAT COLOR OFF.
ENDFORM. "top_of_page
*& Form top_of_page2
text
FORM top_of_page2.
FORMAT COLOR COL_NEGATIVE.
WRITE /5 'Second Block'.
FORMAT COLOR OFF.
ENDFORM. "top_of_page
reward if usefull.... -
Three normal alv output in a single screen
Hi,
SAP ABAP EXPERT,
i want to add 3 normal output of alv in a single screen without using any container can it be possible?
suggest me suitable method for that ASAP.
thanx n regards
pankajHi Dear,
yes it is possible.
See at what respect u want to display three ALv ouput that i donot know.
But suppose in ur ALV 10 fields are there and whenever the 1st field data will differ it should show as another Block and so on like Page -break it is possible .
For this just use sort
and give *
Another way Class using Container
then Block List
Thanks
Arbind Prasad. -
Two report outputs in a single screen
Hi,
I am looking at giving outputs of two reports in a single screen.
I mean one below the other.
We are using web reports and I want to have two reporst made out of differect cubes appear one below the other.
Kindly let me know if this is possible.
Suggestions will definitely be rewarded by giving points.
Regards,
NaveenHi Naveen,
In WAD, you can use Generic Navigation Block web item for displaying the Characteristics/Free Characteristics available in the Query.
In the specific properties tab(Web Item Properties->Specific->List of Characteristics) of this web item, you can specify the Characteristics/Free Characteristics which you want to be displayed in the web report.
Since you want the table web item(which shows the report having the free characteristics) to be affected by the drill down in Navigational block, then specify the data provider of table web item in the <b>Affected Data Provider</b> of the Navigation Block web item.
Naveen, it's not mandatory to check the affected data providers if the data providers for both Navigational Block web item and the Table web item are same.
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K -
Problem with same layout (variant) for two ALV Grid and ALV Tree
Hello!
I have two docking containers on the screen. On the left i have cl_gui_alv_tree, on the right cl_salv_table.
When a user set a default layout for ALV Grid (or ALV Tree), raport starts and sets this layout in both objects (tree and grid).
How to avoid this?Hi,
Take Two radio buttons.
First radion button display the two containers in grid format,
second radio button display the two containers in tree format base on user selection.
CREATE OBJECT G_DOCING_CONTAINER
EXPORTING PARENT = G_CUSTOM_CONTAINER."G_CONTAINER.
DISPLAY THE DATA IN GRID FORMATA
CREATE OBJECT r_grid
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
DISPLAY THE GRID DATA IN SECOND CONTAINER
CREATE OBJECT r_grid1
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
OTHERWISE WE CAN DISPLAY THE TWO CONTAINERS DATA IN A GRID FORMAT
CREATE OBJECT g_tree
EXPORTING
parent = g_docing_container"g_custom_container
IF R1 = 'X'. "FOR GRID DISPLAY
CALL METHOD r_grid1->set_table_for_first_display
CALL METHOD r_grid2->set_table_for_first_display
ELSE.
************TREE DISPLAY
ENDIF.
regards,
muralii
Maybe you are looking for
-
Hi, I have the "¿¿¿¿¿¿¿¿¿¿ ¿¿¿¿¿¿¿¿¿"-Problem in Forms 10.1.2.0.2 with russian text. Environment: 1. Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production With the Partitioning, OLAP and Data Mining options 2. NLS of database NLS_LAN
-
Can I add a form to my website page?
I'd like to add the contact us form to my personal website. Is there a way to generate the html code to add to Dreamweaver? And can I add some type of security feature?
-
What is "*$HR$ [*]" code in data section of INFOSET?
I saw "$HR$ []" code in data section of Infoset. At Sap query, it changes the resulting abap code, and that's all I know. How does this work? Plz, give me some explanation.
-
Problème avec Dreamweaver sur Internet
Salut J'ai un problème de présentation sur Internet je ne suis pas capable de positionner mes pages de référence J'ai comparé les codes avec une autre page semblable, les deux semblent similaires mais ça ne marche pas Comme lorsque l'on regarde tr
-
Cross-Platform Password Creator/Storage/AutoFiller
I wanted to know if anyone can recommend an application that's compatible on a Mac and a PC, that I could use to generate, store, and even auto-fill website passwords...Something along the lines of '1Passwrd' (Mac App) or 'Roboform' (PC App)... Any s