Two annoying problems
My first problem is that with audio and videos, my ipod will just freeze for a few seconds, then continue without any sound.
Second, when i hook my ipod up to my tv using apples av cables, the same problem happens everytime. It will play fine for a few seconds, then freezing and no audio
Any help on either of these would be appreciated.
The second problem is that when I start iTunes and the external hard drive where my songs (not library file) is located, and then start the external drive,
Fire up the external drive and make sure it is ready and mounted before launching iTunes.
Similar Messages
-
TWO Garageband Problems In ONE!!!
Ok... Garageband has been making me fell not-so good lately as I have TWO annoying problems. In both, I have been on MULTIPLE projects, and have restarted MULTIPLE times. I am using an M-Audio Keystation 61 es USB keyboard to record my songs, except for a drum loop that I add in.
Problem One: At the beginning of ANY song I open (even blank ones), there is a weird organ pitch in the first measure. If it matters, it is an A flat. I am in the default key, so I am confused why it is an A FLAT, which is seriously the most random key possible!
Problem Two: When I am recording, or listening to my song, it stops on a measure around 40 every time, (unless I am playing from 40 or really close to it) and I can't figure out why this is. Does anyone know?
Thanks!
I am running Mountain Lion on a Macbook Pro 13-inchNope, for problem 1. This didn't help. This problem starts even when there is no loops, and even no tracks!
Number 2: No, nothing significant starts here. It's really random, like the 41.5th measure! I don't know why it stops HERE! Here are some screenshots (they are pretty normal though so be prepared)
Regular
The Stop
Beeping Sound -
I've noticed two iTunes problems that are quite annoying; one of which has been there for several versions.
The first, which I have just noticed since iTunes 10, is that when modifying the information for several mp3s at the same time (eg., an entire album), the new information won't stick to one of the songs. For me it doesn't initially happen when I start iTunes but after I've changed about 3 albums' information, it starts and then is repeatable for every change. This means the work takes twice as long since I have to enter the information again so that the other song gets the same info.
The second problem is that when I start iTunes and the external hard drive where my songs (not library file) is located, and then start the external drive, any songs added to the library will be saved to the local drive and not the external drive. iTunes can see the external drive since it's able to play songs from it. There is also no message nor a way to see file path as a header option.
I'm glad they fixed the bug where the songs in an album would show up as separate albums.
Has anyone else had these problems? Any work arounds?The second problem is that when I start iTunes and the external hard drive where my songs (not library file) is located, and then start the external drive,
Fire up the external drive and make sure it is ready and mounted before launching iTunes. -
Very annoying problem since 1-2 years with "AllSport GPS" app and e-mail "terror" - please help!
Hi there,
I have a very annoying problem that occurs since 1-2 years. Now I want to get finally rid of this.
I bought the app "AllSport GPS" via BlackBerry App World in 2010. After the uninstallation of this app due to new devices one or two years ago I have the following problem:
On each (!) update of my list in the BlackBerry World app or after the reset and reload of the content of installed app I receive 1-5 (different amount) of mails with the following content:
AllSport GPS license key for your BlackBerry
Thank you for purchasing AllSport GPS from BlackBerry App World. The license key for your device is:
XXXXXXXXXX
This is VERY annoying! I also informed the publisher of the app (Trimble Outdoors) but they told me to contact BlackBerry. During the last 1-2 years - because I often refresh and look after new updates for my apps (I have many installed on my device) - I received, no fake, hundreds (!) of this annoying mails!
I bought the app with my older 9700 or 9790. In the meantime, on my Bold 9790, the app is not available any longer for this, so it is not shown in my BlackBerry World environment. In this case I could make a new clear installation and deletion of the app. But this is not possible.
It would be great if anybody of BlackBerry is reading this and could reset or delete the resending of this mail.
Are there other other thay also have this problem? Any suggestions?
Greetings from Germany
DanielActually, this is a user-to-user forum. There are some BlackBerry employees who read these posts, but in most case you are only talking to other BlackBerry users.
So to solve your question, you will need somebody from BlackBerry, as most other users will not really be able to solve the problem. If you contacted BlackBerry Support, I guess the best thing is to wait for their answer. You can try tweeting to @BlackBerryHelp, in some cases they can reply to you faster. Or you can have their attention much faster.
I find it weird myself that you haven't contacted them before, as you say the problem is since a couple of years now.
I am afraid that you will not receive a lot more information on this forum (as this is a rather specific problem in my opinion). Except maybe if one of the BlackBerry employees on this forum notices this post.
I hope your problem is solved soon!
A like is always appreciated,
but a nomination for BB Elite even more :-)
You can also contact me on Twitter: @ndsmyter -
Hello, I've upgraded my Ipad2 to iOS7. I'm facing two major problems. First, I can't connect to the internet(which seems like a common problem), no Wifi connectivity as well. Second, the Autocad WS app doesn't work. It keeps asking for a username/passcode combination. Please help me guys. I will be genuinely grateful.
CheersDoes my problem has anything to do with SSL for mail settings? Cause when I tried re-adding it says something that I should try without SSL, and I did what you said and it gives me this "The IMAP server pop.mail.yahoo.com is not responding. Check your network connection and that you entered the correct information in the incoming mail server field". Ahh.. this is so annoying, Apple what are you doing to me?! Or is Yahoo doing this to me?!
Thank you for your time. Sorry it doesn`t work. -
I am experiencing a recurring, very annoying problem with my ipad. When i touch an icon ap and start using it, i am often kicked off it and returned to the icon screen. What is going on and does anyone have the same experience and any solutions? Thanks.
If it's happening on all apps that you've downloaded, but not on the Apple built-in apps, then try downloading any free app as that appears to reset something - you can then re-try your apps, and you can delete the free app.
If it's only happening on one or two apps then try closing them completely : from the home screen (i.e. not with any of the affected apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the apps to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
Two new problems with the Quicktime Plug-in
I recently discovered two new problems with the current Quicktime Plug-in for Mac OS X.
First, the Quicktime Plug-in is unable to stream Quicktime media in any internet browsers other than Safari.
There is just nothing on the spot where the embedded Quicktime player should be.
Second, the Quicktime Plug-in only shows the message "The operation couldn't be completed. This file is not a movie file (-2048)"
everytime it should work together with the Flip4Mac Plug-in. The thing is, when facing a webpage where a wmv or wma file is
embedded, there only shows that error message on the spot where the player should exist. I first thought that it would be a
problem with Flip4Mac. So I uploaded about this problem on telestream.net, only to hear that the error message above belongs
to the Quicktime Plug-in.
Both of these problems did not happen at all only three weeks ago. The embedded Quicktime player showed up without any problem
in my Firefox and Opera, and wmv or wma files were streamed successfully through the Flip4Mac and Quicktime Plug-ins.
Then, suddenly, after some point, these two problems began to occur, and there is no information on how to solve them on the web.
I obviously tried uninstalling and reinstalling Quicktime. I even completely erased the hard disk of my Macbook, and reinstalled the
whole Mac OS X. But the problems still remained. I borrowed another Macbook from my friend to check whether these problems
occur in other computers, and they did occur in my friend's Macbook as well. So they are definitely not the matter of my own Macbook only.
I think these might be the problems with the new Quicktime Plug-in 7.7.1.
Please check about these problems and solve them on the next version of the Quicktime Plug-in.
I will give you a couple of hyperlinks so that you can check about the problems directly.
http://blog.naver.com/dbswhddlf1?Redirect=Log&logNo=130025903581
↑ This link is for the first problem (the embedded Quicktime player not showing up in any browsers other than Safari)
http://blog.daum.net/wellabc/15434322
↑ This link is for the second problem (the error message showing up on the spot where a wmv or wma file should be streamed)
p.s: I am sorry that I am Korean.I recommend that you repeat all this via
http://www.apple.com/feedback/quicktime.html
to make sure that Apple will see it. -
Annoying problem with shift key in limit dialog Brio 6.6.4
<p>My company uses Brio Insight & Designer v6.6.4. We (meaning almost all users) are encountering an annoying problem whenadding a limit to a query using the limit dialog. When try toenter a limit value using the shift key, as in Shift T to enter acapital T, the limit value field ends up with a value like"TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT". Thisis very annoying and widespread problem with us. It seemed tostart when we upgraded to Win XP SP2. Is there a solution forother than to "upgrade to the latest version"?</p>
Unfortunately not. The only way we avoided this issue was to upgrade or write the text into a text editor and cut and paste the text into the section name box.
-
When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)
The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse? -
Two important problems with GWIA
I have two major problems in GroupWise 8 SP2 with the latest HP.
First, something I arose at another facility with HP2 and that in this new server with HP3 still happens, the file is lost gwac.db every 5 days at 0 hours exactly. Something I could fix with a script manager to create a backup file every 15 minutes to restore it if it is deleted. While it solves is not neat and not find what you send to delete the file.
And second, that only happens to me with the HP3 is with respect to uid.run, each time I stop the service leaves gwia file as if it was running. My solution was to use the same script gwac.db that by lowering the lift service and delete the file uid.run, but obviously this is not neat.I'm not certain about the second issue but the first is a shoe in...
Look at the working directory and you have set that to be the
wpgate/gwia folder - and that is where the temp files are stored. It
will not delete the temp files before they are 5 days old...
Change the work directory (or better still just delete the string and
let the GWIA decide) and the problem will stop.
This should also have happened in NetWare, but there is a bug that
stops it...
T
On Mon, 21 May 2012 16:06:01 GMT, juanzele
<[email protected]> wrote:
>
>I have two major problems in GroupWise 8 SP2 with the latest HP.
>
>First, something I arose at another facility with HP2 and that in this
>new server with HP3 still happens, the file is lost gwac.db every 5 days
>at 0 hours exactly. Something I could fix with a script manager to
>create a backup file every 15 minutes to restore it if it is deleted.
>While it solves is not neat and not find what you send to delete the
>file.
>
>And second, that only happens to me with the HP3 is with respect to
>uid.run, each time I stop the service leaves gwia file as if it was
>running. My solution was to use the same script gwac.db that by lowering
>the lift service and delete the file uid.run, but obviously this is not
>neat. -
I have two new problems that started today- I can't delete drafts and I can't move emails from my inboxes to folders in mailboxes in the far left column. I work on a MacBook 10.7.5- I have 2 active email accts in Apple Mail. Any suggestions for steps I can take short of going to genius bar?
However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.) -
Two MacBook Problems - Camera and Startup
Alright, I just got my MacBook recently, and I have two minor problems.
1) The camera. I open PhotoBooth, and it just shows a green screen. I used to be able to take pictures, but now all it does it show a green screen. And the green status light by the lens on the screen is on, and it won't turn off.
2) Slowness. Not majorly slow, it's just not going as fast as it did when I first got it, which was about four days ago. Startup is a bit slow, as is running programs. Can I do anything to resolve this?
Thanks very much!Alright, I just got my MacBook recently, and I have
two minor problems.
1) The camera. I open PhotoBooth, and it just shows a
green screen. I used to be able to take pictures, but
now all it does it show a green screen. And the green
status light by the lens on the screen is on, and it
won't turn off.
2) Slowness. Not majorly slow, it's just not going as
fast as it did when I first got it, which was about
four days ago. Startup is a bit slow, as is running
programs. Can I do anything to resolve this?
Thanks very much!
as for the green screen this happened to me to on my imac
check here for everyone else who had this problem
http://discussions.apple.com/message.jspa?messageID=3570567#3570567
and for the slowness try this applications>utilities> disk utility> select ur hd (not the first one the bottom one) and verify disk permissions and repair them if neccessary
that might help -
Annoying problem with View settings on new iPod
Hi folks,
I just got a new 80Gig iPod. When I connect to it in iTunes, I changed the View options to display the columns I want (e.g. bit rate, genre, date added, size, last played, etc) and I also set the width of each column. In the Preferences, I have the box checked to retain the selected view settings. When I disconnect the iPod and then reconnect later, all the View settings have been changed back to the default settings and I have to go back and change them again. This is quite frustrating and I didn't have to do this with my old iPod. Any suggestions on how to fix this annoying problem?It's a bug that's been discussed here before. I find it annoying too that I have to keep re-opening things like "show browser".
Please send Apple a reminder to change this odd behaviour in the next iTunes release.
iTunes Feedback. -
Connecting via Airport express: really annoying problem
I've got a really annoying problem that doesn't make much sense. Have an airport express and my network seems to work OK mostly. My iBook can always connect, never any problem. My eMac however is behaving bizzarely. The longer I'm connected, the worse my connection gets. Until it stops working altogether and I can't access the internet at all. System preferences tells me the Airport card is on, but is not connected to a network. Can still connect to it with the iBook.
Shut down, leave it a good while (a good while too, a short shut down doesn't do it), and it works again.
I can't even think where to start looking, all I can think of is that I have a problem with the Airport card in the eMac (something getting hot in there perhaps). Any ideas?Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.
Maybe you are looking for
-
How to manage cross-schema job dependencies?
Hello. I know how to set up a job schedule where one job triggers another job in the same schema, using the <pre> raise_events</pre> attribute on the first job, then using the <pre> event_condition, queue_spec</pre> attributes on the triggered job wi
-
Please help me, Im at my wits end and about to stomp on my blackberry. The last couple weeks everytime I push a button it gets the timer up. its faster to take the battery out at this point than wait for the timer. drives me nuts! So I searched for f
-
Transfer from One Consignment stockiest to another
Hi, I transferred material from manufacturing plant to one consignment stockiest through Fill up Order. Now I want to transfer material from this consignment stockiest to another consignment stockiest without taking material back to the plant. How ca
-
How can I find out if the rollback optimal parameter size has been set ?
What is the command to find out if the rollback optimal parameter size has been set? And what is the command to find out what is the rollback optimal parameter set to?
-
Hello, I want to make DPS magazin for IOS and Android with a lot of text footnotes. There is about 200 footnotes per article. The idea is to make pop-up windows like in EPUB 3.0. Please help., Hello, I want to make DPS magazin for IOS and Android wit