Two Applications Blocked on new Mac mini

I have used a Mac for 6 years and I didn't know that there is both an Address Book and Contacts.  But, on my brand new Mac Mini Address Book is blocked out as is Alarm Clock Pro.  The error message says they are either damaged or incomplete.  On a brand new Mac? Can anyone solve this puzzle for me?

Address Book doesn't work on Yosemite. It has been replaced by Contacts. (actually renamed is more like it) I am not familiar with Alarm Clock Pro but I assume it's not compatible with Yosemite either. You can search the Mac App Store for a good alternative: click "Apple menu > App Store"

Similar Messages

  • New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
    Thanks for your prompt response,
    Dick Deaton

  • Can I install and boot mac os x 10.6.8 on a new mac mini model A1347 which shipped with osx 10.8.3?  I need to run a custom application using Mac OS X 10.6.8.

    Can I install and boot mac os x 10.6.8 on a new mac mini model A1347 which shipped with osx 10.8.3?
    I need to run an application customized using Mac OS X 10.6.8 on this new mini.

    Hi, not normally, but you can run a Virtual Machine, using 10.6 Server  within...
    Parallels...
    http://www.parallels.com/
    VmWare Fusion...
    http://www.vmware.com/mac
    VirtualBox...
    http://www.virtualbox.org/wiki/Downloads

  • I am unable to use my external CD player. I am told that the player is being used by another application, and that is not true. I have quit everything and restarted. I've unplugged the unit. I have a fairly new mac mini 10.8. What can I do?

    I am unable to use my external CD player. I have a fairly new mac mini 10.8. I am told that the player is being used by another application, but it's not true. I've forced everything to quit and restarted. I've even unplugged the unit and let it rest. I've turned off and unplugged the mac too. I cannot make a CD. Why?

    I misread your message. I thought it said I did not have burn support with the Samsung hardware.
    When the CD goes in it says You inserted a bland CD. choose an action from the popup menu or click ignore
    open finder
    open itunes
    open disk utility
    make this action the default
    eject         ignore           ok
    However, when I am making CDs. I am in itunes. That is where my recordings areI haven't tried to do it from this vantage point.
    I don't know how to make a screen shot on a mac.
    I go to my playlist and click on the little gear icon at the bottom left and I leave things as they are - preferred speed - maximum. I leave it on audio CD - and then I select BURN.
    When I tried this the other day, I could not get it to burn, no matter how hard I tried - everything I could think of, using a different CD, force quitting everything I was not using, restarting the computer, unplugging the CD hardware and plugging it back in after a little while, nothing worked. I got that message that said my player was being used by another application every time I tried to make the CD.  This took over an hour. I don't know of another way to make a CD on the mac; I was not using another program or application. Now it seems to be working fine. I am burning another copy of something I gave away.
    I wish I knew what caused this. It was a real problem Saturday morning.

  • I have a students excel package intalled on my Mac Book - can I also install this software on my new mac mini - do I need another license or can I populate two machines?

    I have a students excel package intalled on my Mac Book - can I also install this software on my new mac mini - do I need another license or can I populate two machines?

    Normally Microsft allows the installation of their programs, except Operating Systems, to be installed on a desktop and notebook at the same time as long as both system are used exclusively by the same person and Not at the same time.
    So this should also be true for MS Office for Mac. The only way to tell is to install it on the Mini and then use the same key to activate it. If the activation goes through you are fine. But if you run both system at the same time do not open any of the Office programs on both system at the same time. That may trigger MS to disallow one of the activations.
    MS Office for both Mac and Windows checks the local network and logs into the MS activation site everytime one of the apps is started to check current activation and to check if you have it running on more then one computer on your local network using the same key.

  • Daisy chain two display port monitors (Dell U2913WM) to new Mac mini Thunderbolt?

    Everything I read said that I could hook up a display port monitor to a Thunderbolt port on the mac mini.  I purchased two display port monitors (Dell U2913WM) that can be daisy chained, and hooked them up.  All I get is mirroring.  Does anyone know how to turn off mirroring with this setup?  I did not get the "uncheck mirroring" option in preferences until I hooked up the second via the HDMI port instead of a daisy chain.  The problem with that is, I cannot take advantage of the full resolution through the HDMI.  It seems I have wasted my money on two monitors.
    Looking for advice on:
    1) How to daisy chain these two Dell monitors to the mac mini and turn off mirroring and use an extended desktop, or
    2) How to take advantage of the full resolution through HDMI port?
    Any help would be greatly appreciated.
    Thanks!

    So re-reading this thread, I now realize you did exactly what I wanted to do but your issue was having a cloned vs. extended desktop. Oops!
    I believe your "nothing plugged in" issue is the cable. I'm not sure that TB cables are backwards compatible with DP - I think it's only the ports. Do you see multiple monitors in "System Preferences > Displays" if you hook the monitors up like you described in your OP?
    My Dell U2713H arrived today and it works like a charm with the supplied Mini-DP to DP cable. The built-in display on my 13" mid 2009 MBP still works if not in clamshell mode, although I will mostly use mine in my HengeDock. In the OSD of the monitor, you can access "Display Settings > Display Info" and it will show you the DP capability. Mine is only DP 1.1a and I believe to run 2 of these at full resolution you will need the bandwidth in DP 1.2 which includes MST (daisy-chaining). This could be your problem.
    Can you access the same menu in your OSD and report back what your DP compatability is?
    Thanks!
    mgb

  • Can the new Mac Mini boot Snow Leopard from an external hard drive?

    I currently boot my 2009 Mac Mini from a FW800 external drive with 10.6.8. If I just plug my external drive into a new 2011 Mac Mini, will it boot into Snow Leopard if I set it as the startup disk or will I get a kernel panic?

    I bought a 2011 Mac Mini, which came with Lion installed. I thought maybe I could repartition it and have a Snow Leopard partition. So I repartitioned it (500gb split into two 250gb partitions). I named the new partition "SnowLeopard" just to make it easy for me to tell the difference.
    I attached the external DVD and put in a Snow Leopard installer disc, holding down the C key so it would boot and install from that, but it just spun for awhile. Doesn't appear to work.
    Then I read somewhere else that someone had managed to clone a copy of Snow Leopard onto an external drive and boot from that. In their situation they were talking about a MacBook, but the principle seemed sane.
    So I rebooted, holding down the T key to put the Mac Mini into Target hard disk mode, and attached it via Firewire to another MacMini (circa 2008 or so, not sure of year, but it was upgraded last year to Snow Leopard and has been upgraded along and along). Then I used Carbon Copy Cloner to copy Snow Leopard (that is, the entire hard disk-- System and all applications and data) to my newer Mac Mini's "snow leopard" partition.
    For yucks, when it was done cloning, I restarted the older Mac Mini, and had it boot from the newer Mac Mini's snow leopard partition--- it worked! To make it easy to tell the difference, I changed the desktop background to something completely different. I think I tried booting from Lion but I can't remember if that worked.
    Then I rebooted the newer Mac Mini, which booted up in Lion, of course. Going into System Settings, I changed the startup disk to the "snow leopard" partition, and rebooted, and it booted up in Snow Leopard.
    I have yet to test the applications on the Snow Leopard partition. Another problem has arisen.
    Because with both of the Mac MInis being active on the network, they both had the same computer and user name. So I renamed the newer Mac Mini to something completely different, and changed the password.
    Unfortunately, now I cannot change any other setting in the System Settings that requires a password. While the newer Snow Leopard lets me log in with the new user and new password, whenever I try to click the "lock" icon to change something, I'm prompted for a username and password. Apparently this is some different username and password than either the new or old username/password.
    I've tried various combinations of both: new user/old password, old user/new password, old user/old password, etc.
    So if you do what I've done, be careful about changing the username and password on your cloned computer. I think it may be wiser to create a new user and then delete the old cloned users. I may just have to re-clone the old Mac Mini to the new one again.
    If anyone has any ideas about this password conundrum, please pass along!

  • Brand New Mac Mini drops network after a few minutes

    My new Mac Mini (Core Duo) arrived a couple of days back and I couldn't wait to set it up. The next thing I did was to download all the latest updates but the network connection kept dropping after a few minutes (seemingly randomly). This is the wired connection (not airport) and all other computers on the network are working fine.
    I thought it might have been a problem with the updates site but now I'm trying to copy my data across the network from my old Windows XP PC (I want to switch) and the connection hangs again after a few minutes.
    The only way to get the network back up is to reboot the system, then it works okay for a few more minutes. I've changed the Ethernet cable and the other PCs are working fine - it's just the Mac that has issues.
    I wondered if the network card is faulty but does anyone have any other ideas?
    I guess as this is only a few days old Apple might exchange it?
    </Mark>
    Mac Mini Core Duo   Mac OS X (10.4.7)  

    Hi John,
    My ISP is PlusNet and there are 2 Windows XP PCs, a Windows 2003 Server, 2 Windows 2003 virtual servers, an HP printer, a DLink Wireless Access Point and a Linksys NSLU2 NAS box all working perfectly happily here - the Mac is the only machine that doesn't want to play.
    The router only has a single Ethernet port so that's connected to a Netgear 10/100Mbps hub which the other devices use.
    In addition it's all NATted so the ISP could only block my external IP address - they don't have access to the router config and in any case all the other devices are communicating with the Internet over the ADSL link with no problems so I think I can rule out the ISP doing anything nasty.
    Thanks for the suggestion anyway.
    So... here's the progress to date:
    I spent two hours on the phone to Apple Support at national rate phone charges. I finally snapped when they asked me to check the firewall settings on my Windows PC (I pointed out that if there was a firewall issue then no data would copy - not several hundred megabytes before timing out). They suggested I took the Mac to an AppleCare centre for diagnosis to see if it could copy files from another Mac (so much for interoperability - they only care that it works with Macs).
    I have confirmed that the problem exists on both static IP and DHCP configurations, and whether or not I set the duplex manually or automatically on the network connection. Interestingly it only occurs connected to a 100Mbps/half duplex hub (not a 10/half hub or a 100/full switch or a 100/full crossover cable) but as all the other devices are working fine I can rule out issues withe the hub.
    So, now I have the Mac connected to a 100Mbps/full duplex switch, with no other devices connected. That switch has a link to the hub with the other devices connected and on to my ADSL router.
    Everything seems to be working but obviously it's not an ideal situation as the Mac should work on the same Ethernet hub as everything else.
    Thanks to everyone for their suggestions. If anyone has any further ideas I'd love to hear from you.
    Cheers, Mark

  • Downgrade to Leopard on new mac mini

    I just got my new mac mini two weeks ago, and I've had enough of Snow Leopard, it's cack! Is it possible to downgrade to Leopard on the new system? it had SL pre-installed. I've put a Leopard retail disc in, but nothing is happening, it' been over an hour or so.

    It is possible, I have done it on multiple occasions.
    First, back up your files. Anything you want to keep. Then, insert your leopard install CD and shut down the computer. Boot the computer while holding "C". It should boot either into an installer program, or into OSX. Follow the instructions that pertain to your situation.
    INSTALLER PROGRAM:
    Open the "Utilities" menu in your menu bar and click on "Disk Utility". Select your hard drive in the sidebar. Be sure to select something like "180gb WDC...", not "Macintosh HD". Then, go to the "Erase tab. Set the format to "Mac OS Extended (Journaled)", and the name to "Macintosh HD". Click Erase. After you have done that, reboot and hold "C" on boot. Install Mac OSX as normal.
    OSX:
    Go to /Applications/Utilities/Disk Utility and open the application.
    Select your hard drive in the sidebar. Be sure to select something like "180gb WDC...", not "Macintosh HD". Then, go to the "Erase tab. Set the format to "Mac OS Extended (Journaled)", and the name to "Macintosh HD". Click Erase. After you have done that, reboot and hold "C" on boot. Install Mac OSX as normal.
    This should work and you will have downgraded to leopard. I'm thinking of doing the same after some of my software stopped working.

  • New Mac Mini - Migration Assistant Problems, New Mac Mini - Migration Assistant Problems

    Ok. So this is the scenario.
    I have just bought a brand new Mac Mini and have jut disposed of a MacBook I had since late 2007.
    I had been using time machine on the MB and thought this the best way to carry over the photos, music and everything else.
    So. I did the last time machine back up prior to the sale and have just booted up the Mini. Admittedly I did skip the 'Transfer Files' box when setting up as I just wanted to get the MM up and running and then use Migration Assistant to bring the files over. After getting going I got MA open and clicked off the applications as I had only a dew from the Mac App Store and knew I could get back from the store afterwards.
    So here's the situation. It did draw over the two accounts, mine and my fiancées. The folders which were on my desktop on the MB were just as they were. Claire's account shows too.
    But.
    The external WD drive I used for my TM back ups is showing on the desktop as a normal yellow drive, not a green TM. I opened About This Mac and instead of seeing the 105gb that was my account before, it's only showing as a minimal 10 or so. I opened iPhoto and it told me that the current library needs updating.
    I will do this if this is what I need to do, but am unsure due to the message saying once it's down it cannot be undone.
    So my Qs.
    Have I messed up somewhere?
    Do I just need to update the iPhoto library and then the photos will show?
    If I go into TM and tell the mac to use the drive, it will then do a back up but can I then open TM and go back in time to when I was backing up files from the MacBook?
    I don't really want to restore the whole drive, but wanted some advice. I've read down thing about 'inheriting' old TM backups, is this roughly what I've been explaining?
    Thanks all!

    It seems that every major release of OS X brings changes to the iPhoto Library. Update the library and your images should show up. Your external drive is not showing with a TM icon because you have not designated it as the TM drive in System Preferences > Time Machine. You should be able to inherit the old TM backups when you designate a TM drive.

  • Spotlight is not working on brand new Mac mini

    Hi,
    I got an issue with two brand new Mac minis running 10.7.3 (11D50d):
    Spotlight is not working. I'm only getting the Wikipedia-Search.
    Here's what I did:
    Installation:
    - took the stock Minis and set up two users, admin and user (limited account)
    - updatet the System
    - installed manually: Adobe Reader X, Office 2011, Firefox 12, Flip4Mac, Perian, Cyberduck, Google Earth 6.2 (the installer without the updater), VLC 2
    - installed using AppStore: CalendarBar, TextWrangler, Unarchiever
    - copied a few documents (Word and Excel files) from a PC to the Desktop
    Troubleshooting:
    - tried to restart Spotlight by adding the entire harddrive to privacy using »Spotlight« within the System Preferences
    - that threw an error "no priviliges"
    - started the System from the recovery system (on an USB-thumbdrive) and repaired permissions
    - that did not help
    - tried to restart Spotlight through the Terminal, running the command: sudo mdutil -E /
    - that command returned: No index.
    - the tried: sudo mdutil -i on /
    - returned: Error: unable to perform operation.  (-400) No index.
    - went the hard way
    - unloaded the daemon: sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    - erased the Spotlight folder: sudo rm -fr .Spotlight-V100/
    - loaded the daemon: sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    That made everything work fine until I did a restart of the System. After the mini restarted I was back at square one...
    Does anyone have an idea how to fix this issue?
    Apple support suggested to reinstall the system. Something I can't do right now, as people need to work on those computers and cannot take a tow hour break...

    Hi Ray Land,
    We can help narrow down the cause.  What operating system are you using on your new Mac Mini? 
    If you are running the Mountain Lion OS, you can download the latest driver here.  An important note is that the current print queue must be deleted before installing the new driver.  This will ensure proper communication.
    If this doesn't work or you need further assistance, please contact us here.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?

    Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?

    Adobe CC applications are very large and the base Mac mini isn't a good choice because it has only 4GB of RAM and has a slow standard hard drive. To get the most out of ACC you should upgrade the mini to at least 8GB. I'd also choose an SSD or Fusion drive for better performance.

  • Which adapter do I need to connect my new Mac Mini to my old Apple Cinema HD monitor?

    I have a perfectly good Apple Cinema HD monitor (model M8536), but it has an ADC connection, and my new Mac Mini isn't compatible with it. I've bought a new screen for the Mac Mini, but there are going to be times when I need to run two screens in parallel on the Mini. Can anyone tell me which adapter I need to do this? I've looked at the Apple DVI to ADC connector  (M8661LL), but I'm not sure this is what I need, and they're quite pricey, even second-hand on eBay, so I don't want to make a mistake!
    Thanks!

    Thanks, dwb ... unfortunately I don't think I'd get very much for my old display, it's so old (> 10 years)! But it still works perfectly, and I'm loathe to throw it away ... and there are going to be times when I need the two screens, so even though I've bought a new 27" Philips monitor, it would be good just to buy an adapter to hook up the old screen ...

  • Using An ASD LCD display with a new Mac Mini

    I want to utilize a 17" Apple Studio Display with my new Mac Mini.
    Does HDMI support the 35-pin Apple Display Connector (ADC)?
    It would require an adapter with female 35-pin on one side and a male HDMI (DVI) on the other. The Apple DVI to ADC adapter doesn't work with the Mac Mini HDMI port.
    If two adapters are needed they must have the correct gender connections.
    Thanks.

    Your correct, you would need an Apple DVI to ADC adapter, And ether mini display port to DVI OR HDMI to DVI adapter. (just a question of witch port you want to use)
    Apple DVI to ADC adapter when they were first released cost about 120; now they're kind of rare and harder to find. Online they can go for 200 dollars. so 120 to 200 dollars to make your display work; and displays don't last for ever they have parts that will break down. Older displays have a light bulb inside them; witch burn out just like all the other light bulbs in your house.
    Also DVI to ADC adapters can some times give you blurry images and or text.
    For 120 dollars you can buy a generic brand 19" LCD. That 19" LCD would have better contrast ratio, brightness, and refresh rate then the old 17" monitor. (and it would have a warranty) Or for 200 dollars you could buy 23" monitor.

  • New Mac Mini thunderbolt to DVI adapter issues

    Hi there,
    I'm working on a new studio installation. We have a new Mac Mini that we're trying to connect up to a 30-inch Cinema HD display with DVI input. We have a Kanex C30 Mini DisplayPort to Dual-Link DVI adapter that plugs into the Thunderbolt port and one of the USB ports (for power) on the back of the Mini, but despite our best efforts we aren't getting anything on the display. Going Mac - adapter - display results in about 7/8ths of the screen going white and displaying two green and misshapen Apple logos for about 5 seconds before it goes blank.
    Ultimately we want to run it over quite a long DVI cable and currently have an Extron signal booster in place, which works perfectly from the Mac Mini's HDMI output through an HDMI to DVI adapter. However we're already using the HDMI output to feed another monitor. 
    So two questions really:
    1. Can the Mac Mini feed two separate displays of different sizes? The 30-inch over Thunderbolt to DVI and another Apple 24 inch display over HDMI to DVI.
    2. Does anybody have any experience with the Kanex or can you recommend an adapter that will work for us?
    Any suggestions would be greatly appreciated. This whole process has been a very long headache!
    Many thanks,
    Josh

    Hi Josh,
    It should work, but not Mirrored of course, just Extended Display...
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    768 MB*
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

Maybe you are looking for