Two Asa Two Isp and Windows 2008 R2 Server
Hello Everybody ,
If you can support my issue , I do appreciate a lot.
First of all thanks a lot for your interest ..
Here is my issue :
I have two Isp Connection ( 1 metro Eth Connection and 1 Ghdsl Connection )
1) Asa 5505 (Version 8.0(5)) is for the 1.st Isp Connection
Windows 2008 R2 server is up and running as Web Server on this ASA 5505 config.
As:
(static (inside,outside) mywebsrv.mycompany.com 192.168.5.5 netmask 255.255.255.255
And Ipconfig of W2008Srv is 192.168.5.5 255.255.255.0 192.168.5.1 (Gateway ASA 5505)
2) Asa 5510 (Version 8.0(5)) is for the 2.nd Isp Connection
Windows 2003 R2 server is up and running as Ftp Server on this ASA 5510 config.
As:
(static (inside,outside) myftpsrv.mycompany.com 192.168.50.10 netmask 255.255.255.255
And Ipconfig of W2003Srv is 192.168.50.10 255.255.255.0 192.168.50.1 (Gateway ASA 5510)
Here is my question :
I need to move my Ftp server (due to old hardware + old server issues )
into the Windows 2008 R2 Server ( HP DL Server with 4 Nic).
If I conect my Asa 5510 to the second nic of Windows 2008 R2 Server.
and give an ip address as 192.168.50.10 255.255.255.0
what should be the gateway Ip address : ?
Before I go ahead and implement :
a) What do I need to do on the Windows 2008 R2 Server
as persistent route adds with different metrics
b) Any config adds or changes on Asa 5505 and ASA 5510 regarding static routes with
different metric and so on ...
Many thanks in advance for your support .
If you do that, the second interface will work as a failsafe for the first NIC.
As far as i know, you won't be able to route traffic based on the type of traffic nor do load-balancing between the interfaces.
I guess the best approach will be to get a newer server and use it as a replacement for the one running 2003 R2.
Similar Messages
-
OS X Leopard and Windows 2008 file server mount_smbfs
Hello
I am unable to use the command mount_smbfs to mount a share on a Windows 2008 file server in OS X 10.5.8 Leopard.
Here is what I am trying to do:
I have a Mac Mini running OS X 10.5.8 that is joined to a Windows 2003 Active Directory domain. I also have a stand alone Windows file server running Windows Server 2008.
I want to mount a share on the Windows 2008 file Server using the command line and not Finder. I do have a reason for wanting to do this which I wont bore you with.
On the Mac Mini, I log in with an Domain account that has permission to access the file shares on the Windows 2008 file server. In Terminal I do the following:
cd /Users/username
mkdir mountpoint
mount_smbfs //windows2008server/fileshare /Users/username/mountpoint
This command should mount the share "fileshare" hosted on server "windows2008server" in the folder "mountpoint" on the Mac Mini.
Here is the problem:
When I execute this command, I get:
Password: so I put in my password
then I get:
mount_smbfs: mount error: /Users/username/mountpoint: Broken pipe
Analysis of the problem:
I tried exactly the same commands to mount a share on a Windows 2003 file server. I am not asked for my password and the share mounts perfectly. I also tried the same command in OS X 10.6 to mount a share on a Windows 2008 file server, again, I was not asked for my password and the share mounted perfectly.
So the problem is only mounting Windows 2008 file shares using mount_smbfs in OS X 10.5.8. I am not sure quite what is going wrong here, as the Mac is joined to the domain, it is granted a Kerberos ticket so should not be asking for my password. Is this a known bug in OS X 10.5? Is there a fix/workaround for it?
Many thanks
Richard.Not sure what user the mount command defaults to. You may want to specify your user name in the mount command (you can also specify the password). Try using this:
mount_smbfs //username@windows2008server/fileshare /User/username/mountpoint
Of course substituting the Windows 2008 account name you are mounting with for the username.
Cheers,
Dave -
Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.
Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.
Thanks Azam When you see answers please Mark as Answer if Helpful..vote as helpful.Hi,
As far as I know there don’t have the log replica function between failover cluster node, if you want to have the Unified log management you can refer the following related
KB:
Configure Computers to Forward and Collect Events
http://technet.microsoft.com/en-us/library/cc748890.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows 2008 R2 Server not showing update history and not detecting new updates
Hi Sirs,
We have a Windows 2008 R2 server which is showing an empty windows update history, and is not detecting new updates from the WSUS server. It says that the windows is up to date, no error when trying to detect new updates, but I doubt it because when I checked
the installed updates menu, it shows that that the most recent update date installed was last 2013, it just stop detecting and installing updates. I've already tried the ff workarounds but to no avail:
1. restart wuauserv and bits service
2. rename/delete the software distribution folder
3. reinstalled the update agent/restarted the server
4. deleted the susclientid on the registry
Thanks in advanced for your help.
here's the windowsupdate.log:
2014-07-22 00:57:06:728 928 a34 AU #############
2014-07-22 00:57:06:728 928 a34 AU Successfully wrote event for AU health state:0
2014-07-22 00:57:06:728 928 a34 AU Featured notifications is disabled.
2014-07-22 00:57:06:728 928 a34 AU AU setting next detection timeout to 2014-07-21 20:50:56
2014-07-22 00:57:06:728 928 a34 AU Successfully wrote event for AU health state:0
2014-07-22 00:57:06:728 928 a34 AU Successfully wrote event for AU health state:0
2014-07-22 00:57:11:727 928 abc Report REPORT EVENT: {AF0753F1-F6F9-4583-87B0-A0B0AEA0C6A7} 2014-07-22 00:57:06:728+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 00:57:11:727 928 abc Report REPORT EVENT: {188957AA-577F-4DC5-9CDB-2D8CFEE96670} 2014-07-22 00:57:06:728+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 00:57:11:727 928 abc Report CWERReporter finishing event handling. (00000000)
2014-07-22 01:11:10:931 928 abc Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 01:11:10:947 928 abc Report Reporter successfully uploaded 2 events.
2014-07-22 04:50:56:736 928 1130 AU #############
2014-07-22 04:50:56:736 928 1130 AU ## START ## AU: Search for updates
2014-07-22 04:50:56:736 928 1130 AU #########
2014-07-22 04:50:56:736 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F40B494F-91F1-4FFB-B7A5-46CEA397AA52}]
2014-07-22 04:50:56:736 928 d08 Agent *************
2014-07-22 04:50:56:736 928 d08 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 04:50:56:736 928 d08 Agent *********
2014-07-22 04:50:56:736 928 d08 Agent * Online = Yes; Ignore download priority = No
2014-07-22 04:50:56:736 928 d08 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 04:50:56:736 928 d08 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 04:50:56:736 928 d08 Agent * Search Scope = {Machine}
2014-07-22 04:50:57:017 928 d08 Setup Checking for agent SelfUpdate
2014-07-22 04:50:57:017 928 d08 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 04:50:57:017 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 04:50:57:017 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:611 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 04:50:59:611 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:611 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 04:50:59:611 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:626 928 d08 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 04:50:59:626 928 d08 Misc Microsoft signed: Yes
2014-07-22 04:50:59:626 928 d08 Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 04:50:59:626 928 d08 Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 04:50:59:626 928 d08 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 04:51:01:095 928 d08 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 04:51:01:095 928 d08 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 04:51:01:110 928 d08 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 04:51:01:110 928 d08 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 04:51:01:142 928 d08 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 04:51:01:142 928 d08 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 04:51:01:860 928 d08 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 04:51:01:860 928 d08 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 04:51:01:891 928 d08 PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 04:51:01:891 928 d08 PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 04:51:01:891 928 d08 PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 04:51:04:485 928 d08 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 04:51:04:485 928 d08 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 04:51:04:875 928 d08 Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 04:51:04:875 928 d08 Agent *********
2014-07-22 04:51:04:875 928 d08 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 04:51:04:875 928 d08 Agent *************
2014-07-22 04:51:04:875 928 1278 AU >>## RESUMED ## AU: Search for updates [CallId = {F40B494F-91F1-4FFB-B7A5-46CEA397AA52}]
2014-07-22 04:51:04:875 928 1278 AU # 0 updates detected
2014-07-22 04:51:04:875 928 1278 AU #########
2014-07-22 04:51:04:875 928 1278 AU ## END ## AU: Search for updates [CallId = {F40B494F-91F1-4FFB-B7A5-46CEA397AA52}]
2014-07-22 04:51:04:875 928 1278 AU #############
2014-07-22 04:51:04:875 928 1278 AU Successfully wrote event for AU health state:0
2014-07-22 04:51:04:875 928 1278 AU Featured notifications is disabled.
2014-07-22 04:51:04:875 928 1278 AU AU setting next detection timeout to 2014-07-22 00:38:28
2014-07-22 04:51:04:875 928 1278 AU Successfully wrote event for AU health state:0
2014-07-22 04:51:04:875 928 1278 AU Successfully wrote event for AU health state:0
2014-07-22 04:51:09:874 928 d08 Report REPORT EVENT: {FE398C01-75A1-4AD8-8C43-0894FCFCE13F} 2014-07-22 04:51:04:875+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 04:51:09:874 928 d08 Report REPORT EVENT: {CDA386AD-6392-4C34-859E-35307BCB5EA0} 2014-07-22 04:51:04:875+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 04:51:09:874 928 d08 Report CWERReporter finishing event handling. (00000000)
2014-07-22 05:05:09:109 928 d08 Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 05:05:09:109 928 d08 Report Reporter successfully uploaded 2 events.
2014-07-22 08:38:28:883 928 1130 AU #############
2014-07-22 08:38:28:883 928 1130 AU ## START ## AU: Search for updates
2014-07-22 08:38:28:883 928 1130 AU #########
2014-07-22 08:38:28:883 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {9A097F9F-88DD-4037-A4DD-48B9CC891327}]
2014-07-22 08:38:28:883 928 53c Agent *************
2014-07-22 08:38:28:883 928 53c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 08:38:28:883 928 53c Agent *********
2014-07-22 08:38:28:883 928 53c Agent * Online = Yes; Ignore download priority = No
2014-07-22 08:38:28:883 928 53c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 08:38:28:883 928 53c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 08:38:28:883 928 53c Agent * Search Scope = {Machine}
2014-07-22 08:38:29:195 928 53c Setup Checking for agent SelfUpdate
2014-07-22 08:38:29:195 928 53c Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 08:38:29:195 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 08:38:29:195 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:804 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 08:38:31:804 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:804 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 08:38:31:820 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:820 928 53c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 08:38:31:820 928 53c Misc Microsoft signed: Yes
2014-07-22 08:38:31:835 928 53c Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 08:38:31:835 928 53c Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 08:38:31:835 928 53c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 08:38:33:241 928 53c Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 08:38:33:241 928 53c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 08:38:33:272 928 53c Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 08:38:33:272 928 53c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 08:38:33:288 928 53c Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 08:38:33:288 928 53c Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 08:38:33:991 928 53c PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 08:38:33:991 928 53c PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 08:38:34:038 928 53c PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 08:38:34:038 928 53c PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 08:38:34:038 928 53c PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 08:38:36:616 928 53c PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 08:38:36:616 928 53c PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 08:38:37:022 928 53c Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 08:38:37:022 928 53c Agent *********
2014-07-22 08:38:37:022 928 53c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 08:38:37:022 928 53c Agent *************
2014-07-22 08:38:37:022 928 aa8 AU >>## RESUMED ## AU: Search for updates [CallId = {9A097F9F-88DD-4037-A4DD-48B9CC891327}]
2014-07-22 08:38:37:022 928 aa8 AU # 0 updates detected
2014-07-22 08:38:37:022 928 aa8 AU #########
2014-07-22 08:38:37:022 928 aa8 AU ## END ## AU: Search for updates [CallId = {9A097F9F-88DD-4037-A4DD-48B9CC891327}]
2014-07-22 08:38:37:022 928 aa8 AU #############
2014-07-22 08:38:37:022 928 aa8 AU Successfully wrote event for AU health state:0
2014-07-22 08:38:37:022 928 aa8 AU Featured notifications is disabled.
2014-07-22 08:38:37:022 928 aa8 AU AU setting next detection timeout to 2014-07-22 04:15:53
2014-07-22 08:38:37:022 928 aa8 AU Successfully wrote event for AU health state:0
2014-07-22 08:38:37:022 928 aa8 AU Successfully wrote event for AU health state:0
2014-07-22 08:38:42:021 928 53c Report REPORT EVENT: {45B5AD35-C612-4C43-8FE0-DFC63B114FC9} 2014-07-22 08:38:37:022+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 08:38:42:021 928 53c Report REPORT EVENT: {BA606714-0153-41BA-ADC8-78520F678D97} 2014-07-22 08:38:37:022+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 08:38:42:021 928 53c Report CWERReporter finishing event handling. (00000000)
2014-07-22 08:52:41:224 928 53c Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 08:52:41:240 928 53c Report Reporter successfully uploaded 2 events.
2014-07-22 12:15:53:027 928 1130 AU #############
2014-07-22 12:15:53:027 928 1130 AU ## START ## AU: Search for updates
2014-07-22 12:15:53:027 928 1130 AU #########
2014-07-22 12:15:53:027 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {9BDC1D71-5139-49D4-88F0-E2B639CE8846}]
2014-07-22 12:15:53:043 928 a58 Agent *************
2014-07-22 12:15:53:043 928 a58 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 12:15:53:043 928 a58 Agent *********
2014-07-22 12:15:53:043 928 a58 Agent * Online = Yes; Ignore download priority = No
2014-07-22 12:15:53:043 928 a58 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 12:15:53:043 928 a58 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 12:15:53:043 928 a58 Agent * Search Scope = {Machine}
2014-07-22 12:15:53:308 928 a58 Setup Checking for agent SelfUpdate
2014-07-22 12:15:53:308 928 a58 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 12:15:53:308 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 12:15:53:324 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:901 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 12:15:55:901 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:901 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 12:15:55:917 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:917 928 a58 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 12:15:55:917 928 a58 Misc Microsoft signed: Yes
2014-07-22 12:15:55:933 928 a58 Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 12:15:55:933 928 a58 Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 12:15:55:933 928 a58 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 12:15:57:167 928 a58 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 12:15:57:167 928 a58 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 12:15:57:167 928 a58 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 12:15:57:167 928 a58 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 12:15:57:198 928 a58 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 12:15:57:198 928 a58 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 12:15:57:917 928 a58 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 12:15:57:917 928 a58 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 12:15:57:963 928 a58 PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 12:15:57:963 928 a58 PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 12:15:57:963 928 a58 PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 12:16:00:572 928 a58 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 12:16:00:572 928 a58 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 12:16:00:932 928 a58 Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 12:16:00:932 928 a58 Agent *********
2014-07-22 12:16:00:932 928 a58 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 12:16:00:932 928 a58 Agent *************
2014-07-22 12:16:00:932 928 1120 AU >>## RESUMED ## AU: Search for updates [CallId = {9BDC1D71-5139-49D4-88F0-E2B639CE8846}]
2014-07-22 12:16:00:932 928 1120 AU # 0 updates detected
2014-07-22 12:16:00:932 928 1120 AU #########
2014-07-22 12:16:00:932 928 1120 AU ## END ## AU: Search for updates [CallId = {9BDC1D71-5139-49D4-88F0-E2B639CE8846}]
2014-07-22 12:16:00:932 928 1120 AU #############
2014-07-22 12:16:00:932 928 1120 AU Successfully wrote event for AU health state:0
2014-07-22 12:16:00:932 928 1120 AU Featured notifications is disabled.
2014-07-22 12:16:00:932 928 1120 AU AU setting next detection timeout to 2014-07-22 08:15:22
2014-07-22 12:16:00:932 928 1120 AU Successfully wrote event for AU health state:0
2014-07-22 12:16:00:932 928 1120 AU Successfully wrote event for AU health state:0
2014-07-22 12:16:05:931 928 a58 Report REPORT EVENT: {25E75367-1205-4F59-A812-02DA28BB3234} 2014-07-22 12:16:00:932+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 12:16:05:931 928 a58 Report REPORT EVENT: {FE1434F8-C6AF-4F87-B3DF-6E4D6C4B05FB} 2014-07-22 12:16:00:932+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 12:16:05:931 928 a58 Report CWERReporter finishing event handling. (00000000)
2014-07-22 12:30:05:116 928 a58 Report Uploading 2 events using cached cookie, reporting URL = http://mtp-wsus2/ReportingWebService/ReportingWebService.asmx
2014-07-22 12:30:05:131 928 a58 Report Reporter successfully uploaded 2 events.
2014-07-22 14:05:29:584 928 10a0 AU Triggering AU detection through DetectNow API
2014-07-22 14:05:29:584 928 10a0 AU Triggering Online detection (interactive)
2014-07-22 14:05:29:584 928 1130 AU #############
2014-07-22 14:05:29:584 928 1130 AU ## START ## AU: Search for updates
2014-07-22 14:05:29:584 928 1130 AU #########
2014-07-22 14:05:29:584 928 1130 AU <<## SUBMITTED ## AU: Search for updates [CallId = {CC67CC44-7DFB-49DE-AA83-8D6A7995ABFA}]
2014-07-22 14:05:29:584 928 8e0 Agent *************
2014-07-22 14:05:29:584 928 8e0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 14:05:29:584 928 8e0 Agent *********
2014-07-22 14:05:29:584 928 8e0 Agent * Online = Yes; Ignore download priority = No
2014-07-22 14:05:29:584 928 8e0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-22 14:05:29:584 928 8e0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-22 14:05:29:584 928 8e0 Agent * Search Scope = {Machine}
2014-07-22 14:05:29:584 928 8e0 Setup Checking for agent SelfUpdate
2014-07-22 14:05:29:584 928 8e0 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-07-22 14:05:29:584 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 14:05:29:600 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:616 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-07-22 14:05:29:631 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:631 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 14:05:29:631 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:647 928 8e0 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-07-22 14:05:29:662 928 8e0 Misc Microsoft signed: Yes
2014-07-22 14:05:29:662 928 8e0 Setup Determining whether a new setup handler needs to be downloaded
2014-07-22 14:05:29:662 928 8e0 Setup SelfUpdate handler is not found. It will be downloaded
2014-07-22 14:05:29:662 928 8e0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 14:05:29:662 928 8e0 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 14:05:29:662 928 8e0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 14:05:29:694 928 8e0 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 14:05:29:694 928 8e0 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2014-07-22 14:05:29:709 928 8e0 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2014-07-22 14:05:29:725 928 8e0 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-07-22 14:05:30:037 928 8e0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-07-22 14:05:30:037 928 8e0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 14:05:30:053 928 8e0 PT WARNING: Cached cookie has expired or new PID is available
2014-07-22 14:05:30:053 928 8e0 PT Initializing simple targeting cookie, clientId = 487b95fe-31a4-44f7-9989-bd77766ce5fa, target group = , DNS name = itg-soatrainsvr.mbtc.mgc.local
2014-07-22 14:05:30:053 928 8e0 PT Server URL = http://mtp-wsus2/SimpleAuthWebService/SimpleAuth.asmx
2014-07-22 14:05:35:630 928 8e0 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-07-22 14:05:35:630 928 8e0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://mtp-wsus2/ClientWebService/client.asmx
2014-07-22 14:05:36:411 928 8e0 Agent * Found 0 updates and 68 categories in search; evaluated appl. rules of 503 out of 777 deployed entities
2014-07-22 14:05:36:411 928 8e0 Agent *********
2014-07-22 14:05:36:411 928 8e0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-22 14:05:36:411 928 8e0 Agent *************
2014-07-22 14:05:36:411 928 1360 AU >>## RESUMED ## AU: Search for updates [CallId = {CC67CC44-7DFB-49DE-AA83-8D6A7995ABFA}]
2014-07-22 14:05:36:411 928 1360 AU # 0 updates detected
2014-07-22 14:05:36:411 928 1360 AU #########
2014-07-22 14:05:36:411 928 1360 AU ## END ## AU: Search for updates [CallId = {CC67CC44-7DFB-49DE-AA83-8D6A7995ABFA}]
2014-07-22 14:05:36:411 928 1360 AU #############
2014-07-22 14:05:36:411 928 1360 AU Successfully wrote event for AU health state:0
2014-07-22 14:05:36:411 928 1360 AU Featured notifications is disabled.
2014-07-22 14:05:36:411 928 1360 AU AU setting next detection timeout to 2014-07-22 10:01:01
2014-07-22 14:05:36:411 928 1360 AU Successfully wrote event for AU health state:0
2014-07-22 14:05:36:411 928 1360 AU Successfully wrote event for AU health state:0
2014-07-22 14:05:41:410 928 8e0 Report REPORT EVENT: {6A2B180E-A95F-42F7-B775-5750DFFD6ECD} 2014-07-22 14:05:36:411+0800 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2014-07-22 14:05:41:410 928 8e0 Report REPORT EVENT: {83041427-693D-4A42-AED0-E8E7BFB8E7E3} 2014-07-22 14:05:36:411+0800 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2014-07-22 14:05:41:410 928 8e0 Report CWERReporter finishing event handling. (00000000)No Service Pack 1 installed. Does this mean that no updates will be detected if SP1 is not installed? thanks
That's exactly what that means!
Updates have not been available for Windows Server 2008 R2 *RTM* systems since April, 2013.
http://support.microsoft.com/lifecycle/?p1=14134
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
ACS Se 4.2.1.15 patch 4 and Windows 2008 R2
Hi, Can anyone advise whether ACS Se and Remote Agent 4.2.1.15.4 supports Windows 2008 R2 please. Thank you.
Hi,
ACS 4.2.1.15 does not support windows 2008 R2.
ACS 5.2 supports the same.
It is a bug CSCtg12399 which is resolved on ACS 5.2.
The release notes of ACS 5.2 describing the same.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/release/notes/acs_52_rn.html
The following link gives details of the ACS 4.2 and Windows 2008 compatibility.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/release/notes/ACS42_RN.html#wp100949
Hope this helps.
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is answered. Do rate helpful posts. -
SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support
Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
ChristophHi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph -
When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.
A number of vendor drivers written for OS X cannot be used when connecting via SMB to a printer that is shared by Windows. This is due to limitations of the driver.
In some cases, if you were to enable the LPD Print Service in Windows, you can connect to the share using the same syntax as SMB but on the Mac you would use the LPD as the protocol.
If you can reply with the brand and model of printer you have then we may be able to provide more information. -
WIndows 7 and Windows 2008 authentication failed in Windows 2003 Domain
Hi,
We have Domain with Windows 2003 and recently Windows 2008 Doamin controllers also added.
We are facing authentication failure for Windows 7 and Windows 2008 Domain members when user is trying to login.
Schema Master is on Windows 2003 and remaining roles on Windows 2008 Domain controller.
Windows XP clients login is working fine.
Problem si for Windows 7 and Windows 2008 Domain members login.
Any hint/solution will be really great help.
Pls share if you have any solutions.
Regards:MaheshHi,
I found some more details about issue
Below are the events getting generated. It looks like due to encryption mismatch with Windows 2003 Domain and Windows7 and Windows 2008 clients. However i am looking for solution if someone tested this case.
Event Type: Error
Event Source: KDC
Event Category: None
Event ID: 26
Date: 08/06/2014
Time: 9:41:04 AM
User: N/A
Computer: AAAAAA
Description:
While processing an AS request for target service krbtgt, the account ADDADA$ did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 2). The requested etypes were 17. The accounts
available etypes were 23 -133 -128 3 -140.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: Kerberos
Event Category: None
Event ID: 4
Date: 08/06/2014
Time: 9:34:17 AM
User: N/A
Computer: AAAAAA
Description:
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server ADADDFHDHDH$. The target name used was . This indicates that the password used to encrypt the kerberos service ticket is different than that on the
target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.COM), and the client realm. Please contact your system administrator.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Regards:Mahesh -
Hello,
We've had SPnego integrated authentication for Windows working with our EP for sometime.
Our company is moving to W2k8 domain and dc's (kdc's) for this question.
When one of our kdc functional servers has been replaced, it appears that the SPNego authentication function has started to fail upon restart of the Java\EP system.
Can anyone provide any info as to what might need to change for the continued use of the SPNego authentication against a W2k8 kdc?
Upon pointing the java\ep system back to a w2k3 kdc the implementation continues to work. So it looks to be windows version related.
Appreciate any help. Not seeing much from SAP areas possibly related to this?
RickHi,
>the Windows 2008 R2 server does not support DES encryption by default. So you have to enable it manually
This workaround works but is not secure : DES has been abandonned for default because it has been conpromised.
The real solution is to use the new SAP SPNEGO/Kerberos implementation which is able to use RC4 or AES.
If you cannot because of an unsufficient relaase or SP level, you have to do like we had to do in my company : buy a third party product which is able to use RC4 even for Netweaver 7.0 J2EE.
The security team has forbidden the use of DES in my company...
Regards,
Olivier -
BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit
Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
ThanksWe have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)". -
Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
I have a Windows 2008 R2 server which is experiencing random BSOD during the night. This is occurring maybe once or twice a week. I have gathered two Memory crash files. This server is running Citrix XenApp 6.5 but nothing else is reporting an issue except
for the memory dump. I’m looking for assistance in reading crash file and finding the cause.
I’ve spent over a week going through articles trying to learn and trouble shoot the BSOD but no closer to understanding the WinDbg 6.3.9600 report.
This is a production server and I have verified that Windows Updates has updated the server with latest releases. I’m hoping that the crash file will show something before I have to run the Driver Verifier.
The crash zip file is located -
https://onedrive.live.com/redir?resid=9644A4E0A26873B1!2359&authkey=!AMS4Svuk-SS3-JA&ithint=file%2czip
* Bugcheck Analysis
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff880009eff38, Virtual address for the attempted execute.
Arg2: 8000000002cfe963, PTE contents.
Arg3: fffff8800da2eea0, (reserved)
Arg4: 0000000000000002, (reserved)
Debugging Details:
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: powershell.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff8800da2eea0 -- (.trap 0xfffff8800da2eea0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80070f3648 rbx=0000000000000000 rcx=fffffa80070f3648
rdx=fffff8800da2fbf8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001680b80 rsp=fffff8800da2f030 rbp=fffff8800da2fbd0
r8=fffff8a01804c680 r9=fffff8800da2fc68 r10=fffffffffffffffd
r11=fffff8800da2fa90 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di pl nz na pe nc
nt!KiPageFault:
fffff800`01680b80 55 push rbp
Resetting default scope
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+44dfc
fffff800`017008b8 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+44dfc
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb
IMAGE_VERSION: 6.1.7601.18409
FAILURE_BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xfc_nt!_??_::fnodobfm::_string_+44dfc
FAILURE_ID_HASH: {aa632d36-b0f7-67cf-89e2-1cec389c0a11}
Followup: MachineOwnerHi Kaysel_GTG,
Just addition. Regarding to Bug Check 0xFC, please refer to following article and check if can help you.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
By the way, since it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
if any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu -
10.2.0.4 database is possible on 11gr2 grid in Windows 2008 R2 server..?
Hi all,
can we installed 10.2.0.4 database on 11gr2 grid for windows server 2008 R2 server...?
kindly suggest any possible cases.Hi Rajesh/all,
I searched lot and get conclude ie. 10.2.0.5 and later versions will support for windows 2008 R2 server. but available only 10.2.0.4. while i try to install database will get error like version not supported.
Here is my case...
i) My two application will support 11gr1database and rest two application support only 10gr2 database version. all application depend by only Windows server.
I installed 11gr2 grid in windows 2008 R2 server successfully.but it will not support the two applications.
consider the above and suggest to install 10gr2 for windows 2008 R2 server. -
EPM 11.1.2: Foundation Services config fails on Windows 2008 SP1 server.
Hi,
I installed EPM 11.1.2 on Windows 2008 SP1, 32-bit. The installation succeeded (no errors in logs). However, when I run EPM Configurator to configure Foundation Services, it fails.
Environment:
EPM Server: Windows 2008 SP1 32-bit
RDBMS: Oracle Enterprise Edition 10.2.0.4 (running on remote AIX 5.3 TL 8 server)
Oracle Client: 10.2.0.4 (full client install)
The configtool.log (see below) indicates that the program cannot find the reg.properties file. I checked the server and this file does not exist. The log file also reports non-existing classpath entries (not sure if this is related). The registry.log file (see below) reports a jdbc driver error: java.sql.SQLSyntaxErrorException: ORA-00917: missing comma.
I submitted a service request with Oracle Support, but the support engineer said that installation and configuration errors are outside the scope of technical support.
Any ideas/suggestions would be greatly appreciated.
Thank you.
Configtool_Summary.log:
---- Product Configuration Summary.....
( May 9, 2010 6:55:58 AM ): ---- Hyperion Foundation Configuration......
( May 9, 2010 6:55:59 AM ): Pre-Configuration :: pass
( May 9, 2010 6:55:59 AM ): Common Settings :: fail
( May 9, 2010 6:56:03 AM ): Configure Database :: pass
( May 9, 2010 6:56:03 AM ): Deploy to Application Server :: fail
( May 9, 2010 6:57:03 AM ): Configure Oracle Configuration Manager :: fail
( May 9, 2010 6:57:08 AM ): ---- Workspace Configuration......
( May 9, 2010 6:57:08 AM ): Deploy to Application Server :: fail
Configtool.log:
[2010-05-09T06:49:19.927-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.oracle.preconfig.util.EpmLoggerPreConfigReporter] trace: Running preconfig checks...[[
Running EPM_ORACLE_HOME check...
EPM_ORACLE_HOME environment variable value: C:\Oracle\Middleware\EPMSystem11R1
JAVA_HOME environment variable value: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11
EPM_ORACLE_HOME check succeeded
Running .oracle.products check... .oracle.products check succeeded
Running Jars manifest check...
Time spent for manifests parsing: 55129 ms
Maximum jars depth achieved: 9, while restriction was: unrestricted
Parsed 439 manifests
Total jars and classpath entries encountered: 439
Total not-existing referenced classpath entries count: 28
Enumerating not-existing classpath entries:
Missing (depth 9) file C:\oracle\Middleware\modules\com.bea.cie.comdev.it_6.1.1.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config.it_6.1.0.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config.L10N_6.1.0.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config_6.1.0.0.jar referenced from C:\oracle\Middleware\utils\config\10.3\config-launch.jar referenced from C:\oracle\Middleware\wlserver_10.3\common\lib\pdev.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_jrf.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar
Missing (depth 5) file C:\oracle\Middleware\wlserver_10.3\server\lib\wlw-langx-L10N.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\wlw-langx.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_jrf.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar
Total classpath elements to check: 67
Check for C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\lib\hit-common.jar existence succeeded; file depth: 1
Check for C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\lib\hit-config.jar existence succeeded; file depth: 1
Jars manifest check succeeded
Running Environment variables check... Environment variables check succeeded
Running Windows system32 directory check... Windows system32 directory check succeeded
Preconfig checks passed! Going further
[2010-05-09T06:49:22.303-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01731] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.wizard.ConfigToolWizardLoader] Couldnt find proper class for wizard state: {0}, skipping...
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: {0}[[
com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Init Storage] has been started.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Getting registry instance] has been started.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05935] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Getting registry instance] has been ended. Execution time [0] sec.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Loading CT documents] has been started.
[2010-05-09T06:49:22.959-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01044] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.config.document.ConfigToolDocumentManager] Loading product descriptor from file C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\product\aps\11.1.2.0\default_aps_1.xml...
[2010-05-09T06:50:53.137-06:00] [EPMCFG] [TRACE] [EPMCFG-05922] [oracle.EPMCFG] [tid: 13] [ecid: 0000IXx7Zkm37E65zNd9iW1BtexF000004,0] [SRC_CLASS: com.hyperion.install.sw.SoftwareRegistry] Adding Hyperion Home entry...
[2010-05-09T06:50:53.137-06:00] [EPMINS] [NOTIFICATION] [EPMINS-00006] [oracle.EPMINS] [tid: 13] [ecid: 0000IXx7Zkm37E65zNd9iW1BtexF000004,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] Wizard state is: RegistryWizardState
[2010-05-09T06:51:41.437-06:00] [EPMINS] [TRACE] [EPMINS-00015] [oracle.EPMINS] [tid: 11] [ecid: 0000IXx7Zhb37E65zNd9iW1BtexF000002,0] [SRC_CLASS: com.hyperion.hit.wizard.AbstractWizardAction] Invoked action: navigation.next
[2010-05-09T06:51:41.453-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: {0}[[
com.hyperion.hit.registry.exceptions.RegistryException: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.Registry.releaseInstance(Registry.java:2039)
at com.hyperion.config.document.Storage.resetRegistryItems(Storage.java:811)
at com.hyperion.config.document.Storage.resetRegistry(Storage.java:798)
at com.hyperion.config.wizard.impl.RegistryWizardState$1.validate(RegistryWizardState.java:348)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:504)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:149)
at com.hyperion.hit.registry.Registry.releaseInstance(Registry.java:2030)
... 5 more
[2010-05-09T06:51:46.891-06:00] [EPMCFG] [WARNING] [EPMCFG-01863] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] Unknown server type: ORACLE
[2010-05-09T06:51:46.938-06:00] [EPMCFG] [TRACE] [EPMCFG-01864] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] HSS DB commit: serverType = ORACLE, host = fsdev21.jeffco.k12.co.us, port = 1521, db = EPMDMO
[2010-05-09T06:54:20.402-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: SSL Protocol Initialized - SSL SocketFactory initialized
[2010-05-09T06:54:20.699-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: Peer Certificate Chain(3):
[2010-05-09T06:54:20.714-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: [[[
Version: V3
Subject: CN=ccr.oracle.com, OU=Terms of use at www.verisign.com/rpa (c)05, OU=Global IT, O=Oracle Corporation, L=Redwood Shores, ST=California, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 126484617735060833031672477175673947636995798346030414463203905767325249772953279144384357766006815101034501698878511926718137275402247180206176507598520965207099036209959054153609440070358274987559344845438007585125964758282852498389487164896685302381484205088204064664382056656592869143856352689583929480807
public exponent: 65537
Validity: [From: Mon May 04 18:00:00 MDT 2009,
To: Sun Jul 04 17:59:59 MDT 2010]
Issuer: CN=VeriSign Class 3 Secure Server CA, OU=Terms of use at https://www.verisign.com/rpa (c)05, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ 52b9bccd 239d7a0d 7bb16003 389848b0]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 62 30 60 A1 5E A0 5C 30 5A 30 58 30 56 16 09 .b0`.^.\0Z0X0V..
0010: 69 6D 61 67 65 2F 67 69 66 30 21 30 1F 30 07 06 image/gif0!0.0..
0020: 05 2B 0E 03 02 1A 04 14 4B 6B B9 28 96 06 0C BB .+......Kk.(....
0030: D0 52 38 9B 29 AC 4B 07 8B 21 05 18 30 26 16 24 .R8.).K..!..0&.$
0040: 68 74 74 70 3A 2F 2F 6C 6F 67 6F 2E 76 65 72 69 http://logo.veri
0050: 73 69 67 6E 2E 63 6F 6D 2F 76 73 6C 6F 67 6F 31 sign.com/vslogo1
0060: 2E 67 69 66 .gif
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: 6F EC AF A0 DD 8A A4 EF F5 2A 10 67 2D 3F 55 82 o........*.g-?U.
0010: BC D7 EF 25 ...%
[3]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://SVRSecure-crl.verisign.com/SVRSecure2005.crl]
[4]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.23.3]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: 0000: 16 1C 68 74 74 70 73 3A 2F 2F 77 77 77 2E 76 65 ..https://www.ve
0010: 72 69 73 69 67 6E 2E 63 6F 6D 2F 72 70 61 risign.com/rpa
[6]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[7]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
[accessMethod: 1.3.6.1.5.5.7.48.1
accessLocation: URIName: http://ocsp.verisign.com, accessMethod: 1.3.6.1.5.5.7.48.2
accessLocation: URIName: http://SVRSecure-aia.verisign.com/SVRSecure2005-aia.cer]
[8]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
[2010-05-09T06:54:20.714-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: [[[
Version: V3
Subject: CN=VeriSign Class 3 Secure Server CA, OU=Terms of use at https://www.verisign.com/rpa (c)05, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: 18905729229464742433949840178165285210788629616064305164260843170201977241822595607598003983710482114887504542420063531704226365322091550579034120400511694538047325464426047959412241672706076731441028369861556999479337863789783838582999151810376013650218058341794419022809268802993425241541430009002110553726612125414429934927217253337526656605550620555845061032537869588361121949241772361851996536275260212221084778605793422355009443918198903890623415507477268041766919150091887619618794603091993360637671933766441597921249204891707900552776893415739395596650548462810104696585021566385762017523199762687187467514321
public exponent: 65537
Validity: [From: Tue Jan 18 17:00:00 MST 2005,
To: Sun Jan 18 16:59:59 MST 2015]
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
SerialNumber: [ 75337d9a b0e1233b ae2d7de4 469162d4]
<RESPONSE><STATUS CODE="202"><MESSAGE></MESSAGE></STATUS><REQUEST_DATA><REGISTRATION_CIPHER VALUE="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"/></REQUEST_DATA></RESPONSE>
[2010-05-09T06:55:22.359-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] trace: The component type 'Foundation' is not supported. Valid component types are: [OCM, OHS, WebCache]
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-02015] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Creating product component(s) in the HIT Registry (if not created yet) for all selected product(s)...
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = WORKSPACE
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-05955] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Setting link. Parent: id [b57bd794d9cd2537337158c31287d1efc497ffe], componnet type [FOUNDATION_SERVICES_PRODUCT]. Child: id [b57bd794d9cd2537337158c31287d1efc497ff1], component type [WORKSPACE]
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1] to be stored
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : allRegistryComponents contains WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1]
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : toUpdateComponents did not contain WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1]. It has been added to toUpdateComponents
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-01426] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] propertiesExtractLocation : C:\Oracle\Middleware\user_projects\domains\EPMSystem\scripts
[2010-05-09T06:55:47.986-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.utils.Shortcut] trace: shortcut out:Microsoft (R) Windows Script Host Version 5.7[[
Copyright (C) Microsoft Corporation. All rights reserved.
[2010-05-09T06:55:58.627-06:00] [EPMCFG] [ERROR] [EPMCFG-02151] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] oracleComponent is null. Component will not be provisioned.
[2010-05-09T06:56:02.690-06:00] [EPMCFG] [WARNING] [EPMCFG-01113] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Couldn't find product component in updateRegistryEntries
[2010-05-09T06:56:02.706-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01107] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Running file: C:\Oracle\Middleware\EPMSystem11R1\products\Foundation\workspace\database\Oracle\create.sql
[2010-05-09T06:56:03.503-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
java.lang.NullPointerException
at com.hyperion.cis.config.AppServerDeployer.isDeployAsWinService(AppServerDeployer.java:1699)
at com.hyperion.cis.config.AppServerDeployer.initializeParameters(AppServerDeployer.java:169)
at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:636)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:331)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:57:03.804-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.foundation.config.OCMTaskProcessor] Error: [[
java.lang.NullPointerException
at com.hyperion.foundation.config.OCMTaskProcessor.uploadOCMConfigurationToRegistry(OCMTaskProcessor.java:209)
at com.hyperion.foundation.config.OCMTaskProcessor.execute(OCMTaskProcessor.java:95)
at com.hyperion.cis.CustomTaskProcessor.execute(CustomTaskProcessor.java:94)
at com.hyperion.config.wizard.impl.RunAllTasks.executeCustomTask(RunAllTasks.java:725)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:313)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [ERROR] [EPMCFG-02151] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] oracleComponent is null. Component will not be provisioned.
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Component provisioning is done.
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Done sorting tasks by priority
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-07326] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Executing deployment task for ProductDescriptor [workspace]
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01328] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Looking for product component in the registry: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:57:08.007-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
java.lang.NullPointerException
at com.hyperion.cis.config.AppServerDeployer.isDeployAsWinService(AppServerDeployer.java:1699)
at com.hyperion.cis.config.AppServerDeployer.initializeParameters(AppServerDeployer.java:169)
at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:636)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:331)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
Registry.log:
[2010-05-09T06:51:46.860-06:00] [EPMREG] [NOTIFICATION] [EPMREG-51096] [oracle.EPMREG.REG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryUtils] [SRC_METHOD: readDatabaseProperties] Security Key could not be read from reg.properties file.
[2010-05-09T06:55:33.719-06:00] [EPMREG] [ERROR] [EPMREG-11054] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryConnection] [SRC_METHOD: createRegistry] [arg: C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\registry\create_oracle.sql] An SQL Exception executing the registry DDL script C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\registry\create_oracle.sql.
[2010-05-09T06:55:33.735-06:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryConnection] [SRC_METHOD: createRegistry] Exception occurred.[[
java.sql.SQLSyntaxErrorException: ORA-00917: missing comma
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:183)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:942)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1223)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1775)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1744)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:299)
at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:241)
at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:82)
at com.hyperion.hit.registry.Registry.createRegistry(Registry.java:2220)
at com.hyperion.config.document.Storage.createRegProperties(Storage.java:1396)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:105)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11037] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: getConnection] An error occured when checking the status of the registry connection and reseting it.[[
com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
at com.hyperion.hit.registry.Registry.getConnection(Registry.java:161)
at com.hyperion.hit.registry.Registry.lookupComponents(Registry.java:1263)
at com.hyperion.hit.registry.Registry.lookup(Registry.java:517)
at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:70)
at com.hyperion.css.registry.RegistryManager.populateCSSTrustedServicesKey(RegistryManager.java:140)
at com.hyperion.foundation.config.FoundationDbConfigurator.populateCssTrustedKey(FoundationDbConfigurator.java:121)
at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:88)
at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11045] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: lookupComponents] [arg: SYSTEM9] An exception when looking up components of type SYSTEM9 matching the specified properties.
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: lookupComponents] Exception occurred.[[
com.hyperion.hit.registry.exceptions.RegistryException: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.Registry.getConnection(Registry.java:178)
at com.hyperion.hit.registry.Registry.lookupComponents(Registry.java:1263)
at com.hyperion.hit.registry.Registry.lookup(Registry.java:517)
at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:70)
at com.hyperion.css.registry.RegistryManager.populateCSSTrustedServicesKey(RegistryManager.java:140)
at com.hyperion.foundation.config.FoundationDbConfigurator.populateCssTrustedKey(FoundationDbConfigurator.java:121)
at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:88)
at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
at com.hyperion.hit.registry.Registry.getConnection(Registry.java:161)
... 10 moreYes. I downloaded and extracted the additional components. I have also dropped and recreated the HSS repository. Each time I have tried to reinstall, I have uninstalled all EPM/Oracle components, removed registry keys, removed EPM environment variables and removed references to oracle in the PATH environment variable.
I have tried installing/configuring HSS 11.1.2 on both Windows 2008 SP1 64-bit and Windows 2008 SP1 32-bit. The configuration error is the same.
I was able to get my SR reassigned to a different support analyst, and we are working on troubleshooting now.
If you can think of anything else to try, let me know.
BTW...on the 32-bit server, the page file maximum is 16GB (should be enough)?
Thanks. -
Unable to login to Report Service on Windows 2008 R2 server
I have reporting services installed on a Windows 2008 R2 server, When I make and RDP connection to the server and go to http://servername/Reports everything works fine. When I try to connect from another client to the web service, it asks for username and
password. it fails 3 times and the shows a blank page.
When I see the Event Viewer in the server (Windows Logs --> Security, I can see an Audit Failure:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 9/4/2014 11:46:25 AM
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: MI-SWACO-DB.houston.livequest.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: Administrator
Account Domain: HOUSTONLQ
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000035b
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: MI-SWACO3
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-09-04T16:46:25.247229500Z" />
<EventRecordID>8917</EventRecordID>
<Correlation />
<Execution ProcessID="504" ThreadID="1344" />
<Channel>Security</Channel>
<Computer>MI-SWACO-DB.houston.livequest.net</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">Administrator</Data>
<Data Name="TargetDomainName">HOUSTONLQ</Data>
<Data Name="Status">0xc000035b</Data>
<Data Name="FailureReason">%%2304</Data>
<Data Name="SubStatus">0x0</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">
</Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">MI-SWACO3</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">-</Data>
<Data Name="IpPort">-</Data>
</EventData>
</Event>
The firewall is OFF in both client and server.
I saw a similar question and the answer is related to firewall which is not may case.Hi Mario,
According to your description, when you try to access the Report Manager in another client, a login dialog prompt. After typing a valid username and password 3 times, a blank page displays.
Generally, the issue is always caused by the Report Server is configured to use Kerberos authentication, while the Service Principal Name(SPN) is not configured correctly. To fix this issue, please refer to the following methods:
Register an SPN for the Report Server service under the domain user account.
Change the service account to run under a built-in account such as Network Service.
Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file.
Besides, the issue can also be caused by the Internet Explorer (IE) didn't pass the user's credential to the Report Server automatically or the IE is not Windows Integrated enabled. For more detail steps about how to address this issue, please refer to the
following steps:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/184c4f6c-b292-4f9a-beca-80b70f4392fe/report-manager-prompts-3-or-4-times-for-usernamepassword-before-letting-users-in?forum=sqlreportingservices
Reference:
Resolving Kerberos Authentication Errors When Connecting to a Report Server
Solving the Reporting Services Login issue in the February CTP of SQL Server 2008
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Unable to list SFTP Directory on windows 2008 r2 server from internet
Hi experts,
I have configured a SFTP on windows 2008 r2 server. And i am using the Filezilla on client machine to connect to SFTP server.
The connection works properly on internal network but it displays error when i connect from internet.
Error: GnuTLS error -53: Error in the push function.
Response: 550 Data channel timed out.
Error: Failed to retrieve directory listing
This machine is publish with public IP and port22. The connection and authorization process gets complete but stops are Directory Listing.
PLease suggest the troublshooting steps..
Let me know if any more info is rquired.Hi,
Do you also use the Filezilla to configure SFTP server? Since you use Filezilla on client machine to connect to SFTP server, I would suggest you ask for help from Filezilla forums for better and accurate answer.
https://forum.filezilla-project.org/
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Line item display for Segment Clearing GL account
In my scenario, document splitting is activated and zero balance is set for profit centre and segment. I have assigned a GL account for automatic posting for segment clearance for posting. I have posted few transactions and the document shows the p
-
My iPad will stay on for minute or so, then will restart. I have tried to restore, but it says I must have "Find My iPad" turned off. The iPad will not allow me to turn that off, so I am at quite the impasse. Any help?
-
Everytime I download this, after it trys to install i get "patch package could not be opened, contact vendor and verify that this is a valid windows installer patch package," why is this/
-
Porblem getting my WRT54GC connected to another router
I have a cable coming to my flat from a router from another flat. when i plug it to my wifi router and set up a wireless network i can access my router with my laptop but i cant access internet or the other router. when i put the incoming cable direc
-
Ho aggiornato il sistema operativo da Windows 8 Pro 64 bit a Windows 8.1 Pro. Adobe Bridge non ha più funzionato correttamente. L'area di lavoro si modifica e si espande anche sul secondo monitor. Ho disinstallato, resettato e reinstallato tutta la S