Two Batch in a Single Bin_ Specific requirement

Dear Team,
Its a specific requirement.
A whole pallet of 1000 kg will be placed into a Single Bin. One Pallet may contain different batches totaling 1000 Kg
1. Batch 'A' - 1200 kg, Batch 'B' - 1400 Kg, Batch ' C' - 1600 Kg.
St Bin placement should be
Bin B1 - 1000 Kg of Batch 'A'
Bin B2 - 200 Kg of batch 'A' + 800 Kg of Batch 'B'
Bin B3 - 600 Kg of Batch 'B' + 400 Kg of Batch 'C'.
Could you please suggest how to configure such requiremnt?
Thanks a lot
Sam

Hi Madhu,
Thanks a lot for your valuable input
Current I have below settings
1. Putaway strat : P - St Unit Type
2. Mixed Storage: X
3. Add to Exist St. : X
4. SU Managment : Activated
5. SUT check : Active
6. Capacity method: 1 - as per max. weight
7. material master: Palletization maintained as 1000 kg per PAL
8. Bin: Bin type mainatined with max. weight 1000 kg
9. Define Strategy for Pallet is configured: Bin Section and assignement to SUT is done
STILL this config is NOT ABLE to fulfill my requiremnt
I tried permutation and combination..but failed.
Could anyone suggest a solution..?
Thanks
Sam
Edited by: Sameer99 on Apr 28, 2011 4:05 PM
Edited by: Sameer99 on Apr 28, 2011 4:07 PM
Edited by: Sameer99 on Apr 29, 2011 8:16 AM

Similar Messages

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

Merging two records in a single record for the same matnr,werks and bwart.

Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table.
I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable.
Then there should be only one record for the same matnr,werks,bwart.
Any suggestion would be appreciated.
Regards,
Amit

hi,
You can COLLECT statement only if all non key fields are numeric.
This statement Adds all such fields and give us a single record.
Regards
Sumit Agarwal

Batch File to look at specific location in txt files

Is there a way to have at batch file look at a specific line and location from a text file and pull it for use in the batch file? For example, line 1 of sample.txt position ~15,8.
I'm currently using the Find command(FIND /C "" *.TXT) but would like to be more specific in search.

From a command line prompt, type 'help set' and look at environment variable expansion. Read the part that says "May also specify substrings for an expansion." It shows an example that uses ~10,5 to start at offset 10 and get the next 5 characters. Of course,
this means that you will need to you will need to loop through each line. Use the FOR command; type 'help for' and start reading from "Some examples might help." It shows how you can parse a text file:
FOR /F %%i IN (myfile.txt) do @echo %%i
In a batch file, use two percent signs. At the command line, use one percent sign.
After the 'do' in the FOR command, you can use a CALL :Someprocedurename %%i, which would pass the line from the file into a sub and you can use the SET command to parse it.
The Help mentions Command Extensions. At command prompt, type 'help setlocal' and read about ENABLEEXTENSIONS. At the bottom of the Help, they give you an example of how to add this to a batch file. You will need this to use the SET command to parse lines
from the file.
If you want to save the output, use the redirects, > or >> (create output file or append to output, respectively). Use the same for HELP output: help for > for-help.txt. In your line parser, you would do something more like this:
[code]
:ParseLine
@echo %1 >> outputfile.txt
exit /b
GoTo :Eof
[end code]
To exit a sub, use either exit /b or goto :eof. Exit will allow you to return a value or error code. Goto :eof simply goes to end of file and returns control to the caller (in our case the FOR command). Of course, you can type 'help exit' to learn more.
Outside of a subroutine, exit will end the batch file script and return to command prompt. This can be useful when you call this batch file from another script, but if you are starting it from Windows you may want to keep the command prompt open to show user
the results or simply tell them to look at the output file.
You can find good samples on Rob Van Der Woude's website.
http://www.robvanderwoude.com/batchstart.php
A major geek...

How to get the list of batch jobs running in a specific application server

Hi Team,
I am trying to check in SM37 if there is any specific condition to get the list of batch jobs assigned to a specific target server but cant find any.
Is there is way to find the list of batch jobs assigned to run in one specific application server.( Target server specified in SM36 while job creation)

Hello,
This is what you can do in SM37.
Execute the list of batch jobs, when the result appears on the screen edit the ALV grid via CTRL+F7.
Now add the following columns "TargetServ" and "Executing server".
You will now have two extra columns in your result list.
TargetServr contains the value of the application server where the job should run when you have explicitely filled it in.
Often this is empty, this means that at runtime SAP will determine itself on which application server the job will run (depending of course where the BGD processes are defined).
Executing server is filled in always for all executed jobs, this is the actual application server where the job has run.
You can also add these two fields in your initial selection screen of SM37 by using the "Extended job selection" button.
I hope this isusefull.
Wim

How can we give two name for a single material ??

Hi friends
how can we give two name for a single material ??
e.g.. if single material is sold to different customer by different names
then how can we do that ??

Yes
you can achieve it thro CMIR in T code VD51
Go to T code VD51 choose that customer and material combination and click on to its details blue lens on application tool bar
In the screen which is coming ,enter your description in the CUSTOMER DESCRIPTION tab the second one and save
Now create a sales order and see
Your requirement will be fulfilled
If a material is pen description is ball pen in material master and for customer A you have defined it as Pen 1 and description as Super ball pen in VD51
If a material is pen description is ball pen in material master and for customer B you have defined it as Pen 1 and description as VerySuper ball pen in VD51
Now in sales order the description will appear as Super ball pen for Customer A
Now in sales order the description will appear as Very Super ball pen for Customer B
Hence the material pen whose description is ball pen in MMR will appear as super ball pen for customer A and very super ball pen for customer B
Hope you have checked the field info record in VOV8
I have tried this tested this and getting it
Regards
Raja
Edited by: ramanathan raja on Dec 8, 2008 5:54 PM

Can we call two layouts for a single script?

Can we call two layouts for a single script?
Where dow e assign print program to a script?
in NACE transaction is it possible.......
Thanks in advance.
Regards.
Abhilash.

Hi Abhilash.
Greetings for the day.
U can use one script in diffrent programs.
Yea u can do it in NACE transaction.
procedure would b as foloows:-
1.NACE
2.Select the apllication
3.Output types (press tab).
4.again selet the output type which u require
5.then press "procedure routines"
here u can give the program name and fom name.
plz reward if found helpful.
regards
prashant tiwari

Specific requirements on extraction triggering action

Hello,
I have a little bit specific requirements on how to replicate data betweeen two Data Warehouses.
So I have a DW. This DW recieves data from a lot of source systems.
Also it have some table, the structure of that table like the following (lets name the table "load_proc_table"):
source_system, load_start_date, load_finish_date.
What I need is to perfrorm extracting data from the DW basing on previously obtained value of the load_finish_date:
1. Init load. Extract data, save current value of the load_finish_date (let it be saved_load_finish_date).
2. Extract data changes using triggering action: when exists (load_proc_table.load_start_date > saved_load_finish_date AND load_proc_table.load_finish_date IS NOT NULL)
3. Extract only data changed in time period between load_proc_table.load_start_date and load_proc_table.load_finish_date (all rows in the tables are marked with date/time showing when row)
So the question: is it possible to save load_finish_date and use it for triggering extraction process?
And is it possible at all to meet requirements described below using Golden Gate?
Why I need it: I need to run ETL process only after all the actual data will be trasfered to the destination database (between saved_load_finish_date and last load_finish_date values).
Thanks.
Sergey.

I think you mean the followings:
You plan to use ETL loading tool to do the initial loading. However, you want to replicate the new data added to DW during the loading time.
If this is the case, you can start the Oracle GoldenGate extraction when you start the initial load to record the changes. Then start the replicat after the initial loading is done.
If not, please clarify. May I ask what DB is used for your source DW?

Production order components has two batches

how can i configure my system in such a way that upon creating the order, and saving, system will suggest two batches ( in case first batch doesn't meet requirement quantity )

Hi,
We had alredy discuss this problem in another thred which you have posted.I have check Batch Determination with this characterstic today itself and it works fine.
Only problem with this characterstic is during Batch Determination system select those Batches also for which Self Life is alredy passes the limit.Due to this SAP has suggest two other charactersic LOBM_MBDAT and LOBM_RLZ along with LOBM_VFDAT.
Below link may help to solve your problem over Batch Determination
[http://www.sapdb.info/category/certification/] go to SCM595 Batch Management and read the topic over Batch Determination.
Regards,
Dhaval
Edited by: Dhaval Choksi on Jul 1, 2008 6:41 PM

What are the optimal hardware specification requirements for Adobe Photoshop CS6?

Greetings to the staff and users of this forum,
As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
If any user here could provide me with proper higher specs, I would really be grateful.
Thanks,
phdwengr

This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

Dispaly of two tables for a single tab in tabstrip

Hi Experts,
I have three tables,one is the consolidated table of another one and the third one is completely different but the requirement is ,
for a SINGLE TAB click of a tab strip both the tables which are related have to be displayed
and for the the third table a new tab has to be clicked.
,i know to display only one ui element for one tab .
please help me out with this problem of displaying of two tables for a single tab

Hi Shanmukha,
Suppose you name of name of tables which need to be displayed in one tab is table 1 and table 2. To get this you can try these steps:
method 1:
- create a view with 2 tables in it i.e table 1 and table 2. create a view container UI element in tab strip and embed this view in it.
method 2
- create view1 containing table 2 only.
- create view 2 containing table 1 and a view container UI element. Embed view 1 in the view container of this view. Now your view 2 contains both the tables.
- In the tab strip's tab, create another view container UI element and embed view2 in it.
I hope it helps.
Regards
Arjun

TWO ERRO ORA-01427: single-row subquery returns more than one row

Hi,
I have a procedure which contains a cursor. If i run the select statement in the cursor separetly, it returns only value and works fine. But the same select statement in the cursor of a procedure throws me the error as below:
TWO ERRO ORA-01427: single-row subquery returns more than one row
Not sure what going on...any help appreciated.
Below is the select statement:
SELECT DISTINCT PSE.PARENT_POSITION_ID,
(SELECT DISTINCT PPD1.SEGMENT2
FROM PER_POSITION_DEFINITIONS PPD1,
HR_ALL_POSITIONS_F HAPF2,
PER_POS_STRUCTURE_ELEMENTS PSE2
WHERE TRUNC(SYSDATE) BETWEEN
HAPF2.EFFECTIVE_START_DATE AND
HAPF2.EFFECTIVE_END_DATE
AND PPD1.POSITION_DEFINITION_ID =
HAPF2.POSITION_DEFINITION_ID
AND
HAPF2.POSITION_ID = PSE2.PARENT_POSITION_ID
AND PSE2.PARENT_POSITION_ID =
PSE.PARENT_POSITION_ID
AND ROWNUM = 1) SEGMENT2,
(SELECT DISTINCT PAPF1.FIRST_NAME || ' ' ||
PAPF1.LAST_NAME CHIEF_NAME
FROM PER_ALL_PEOPLE_F PAPF1,
PER_ALL_ASSIGNMENTS_F PAAF1
WHERE TRUNC(SYSDATE) BETWEEN
PAPF1.EFFECTIVE_START_DATE AND
PAPF1.EFFECTIVE_END_DATE
AND TRUNC(SYSDATE) BETWEEN
PAAF1.EFFECTIVE_START_DATE AND
PAAF1.EFFECTIVE_END_DATE
AND PAAF1.POSITION_ID = PSE.PARENT_POSITION_ID
AND PAPF1.PERSON_ID = PAAF1.PERSON_ID
AND ROWNUM = 1) CHIEF_NAME
FROM PER_POS_STRUCTURE_ELEMENTS PSE,
HR_ALL_POSITIONS_F HAPF,
PER_POSITION_DEFINITIONS PPD
WHERE PSE.SUBORDINATE_POSITION_ID = 52744
AND TRUNC(SYSDATE) BETWEEN HAPF.EFFECTIVE_START_DATE AND
HAPF.EFFECTIVE_END_DATE
AND HAPF.POSITION_ID = PSE.SUBORDINATE_POSITION_ID
AND HAPF.POSITION_DEFINITION_ID = PPD.POSITION_DEFINITION_ID;
Thanks
PK
Edited by: user539616 on Jun 30, 2009 6:30 PM

Hi,
The cursor has a different parameter? Maybe the query is not exactly the same. Could you check this?
This is your query (formatted):
SELECT DISTINCT PSE.PARENT_POSITION_ID,
                (SELECT DISTINCT PPD1.SEGMENT2
                   FROM PER_POSITION_DEFINITIONS   PPD1,
                        HR_ALL_POSITIONS_F         HAPF2,
                        PER_POS_STRUCTURE_ELEMENTS PSE2
                  WHERE TRUNC(SYSDATE) BETWEEN HAPF2.EFFECTIVE_START_DATE AND
                        HAPF2.EFFECTIVE_END_DATE
                    AND PPD1.POSITION_DEFINITION_ID = HAPF2.POSITION_DEFINITION_ID
                    AND HAPF2.POSITION_ID = PSE2.PARENT_POSITION_ID
                    AND PSE2.PARENT_POSITION_ID = PSE.PARENT_POSITION_ID
                    AND ROWNUM = 1) SEGMENT2,
                (SELECT DISTINCT PAPF1.FIRST_NAME || ' ' || PAPF1.LAST_NAME CHIEF_NAME
                   FROM PER_ALL_PEOPLE_F      PAPF1,
                        PER_ALL_ASSIGNMENTS_F PAAF1
                  WHERE TRUNC(SYSDATE) BETWEEN PAPF1.EFFECTIVE_START_DATE AND
                        PAPF1.EFFECTIVE_END_DATE
                    AND TRUNC(SYSDATE) BETWEEN PAAF1.EFFECTIVE_START_DATE AND
                        PAAF1.EFFECTIVE_END_DATE
                    AND PAAF1.POSITION_ID = PSE.PARENT_POSITION_ID
                    AND PAPF1.PERSON_ID = PAAF1.PERSON_ID
                    AND ROWNUM = 1) CHIEF_NAME
FROM PER_POS_STRUCTURE_ELEMENTS PSE,
       HR_ALL_POSITIONS_F         HAPF,
       PER_POSITION_DEFINITIONS   PPD
WHERE PSE.SUBORDINATE_POSITION_ID = 52744
   AND TRUNC(SYSDATE) BETWEEN HAPF.EFFECTIVE_START_DATE AND HAPF.EFFECTIVE_END_DATE
   AND HAPF.POSITION_ID = PSE.SUBORDINATE_POSITION_ID
   AND HAPF.POSITION_DEFINITION_ID = PPD.POSITION_DEFINITION_ID;Tips: To put formatted code you must use {noformat}{noformat} tags, start tag and end tag are the same,you don't need to put '/' in the close tag.
Regards,

Displaying two blocks in a single screen

Hi all,
I want to dispaly two screens in a single with as-usual properties.
Please give your suggestions with steps.
Thansk in advance,
Regards,
Balaaji.

hi balaji ,
create a main screen and in which create two sub screens . like this .
REPORT ZSUBSCREEN.
TABLES: USR02,       "Logon data
         SSCRFIELDS. "FIELDS ON SELECTION SCREENS
SUBSCREEN 1
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
    SELECT-OPTIONS: USERNAME FOR USR02-BNAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN END OF SCREEN 100.
SUBSCREEN 2
SELECTION-SCREEN BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
    SELECT-OPTIONS: LASTLOGI FOR USR02-TRDAT.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN END OF SCREEN 200.
SUBSCREEN 3
SELECTION-SCREEN BEGIN OF SCREEN 300 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-030.
    SELECT-OPTIONS: CLASSTYP FOR USR02-CLASS.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN END OF SCREEN 300.
STANDARD SELECTION SCREEN FOR SCROLLING LEFT AND RIGHT
SELECTION-SCREEN: FUNCTION KEY 1,
                   FUNCTION KEY 2.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK SUB FOR 15 LINES,
                   END OF BLOCK SUB.
START-OF-SELECTION.
     SELECT * FROM USR02 WHERE BNAME IN USERNAME
                           AND ERDAT IN LASTLOGI
                           AND CLASS IN CLASSTYP.
        WRITE: / 'User ', USR02-BNAME,
                 'Last Login Date ', USR02-TRDAT,
                 'Last Login Time ', USR02-LTIME,
                 'CLASS ', USR02-CLASS.
     ENDSELECT.
END-OF-SELECTION.
INITIALIZATION.
SCREEN ICON LEFT AND RIGHT
   SSCRFIELDS-FUNCTXT_01 = '@0D@'.
   SSCRFIELDS-FUNCTXT_02 = '@0E@'.
   SUB-PROG = SY-REPID.
   SUB-DYNNR = 100.
AT SELECTION-SCREEN.
   CASE SY-DYNNR.
     WHEN 100.
       IF SSCRFIELDS-UCOMM = 'FC01'.
         SUB-DYNNR = 300.
       ELSEIF SSCRFIELDS-UCOMM = 'FC02'.
         SUB-DYNNR = 200.
       ENDIF.
     WHEN 200.
       IF SSCRFIELDS-UCOMM = 'FC01'.
         SUB-DYNNR = 100.
       ELSEIF SSCRFIELDS-UCOMM = 'FC02'.
         SUB-DYNNR = 300.
       ENDIF.
     WHEN 300.
       IF SSCRFIELDS-UCOMM = 'FC01'.
         SUB-DYNNR = 200.
       ELSEIF SSCRFIELDS-UCOMM = 'FC02'.
         SUB-DYNNR = 100.
       ENDIF.
   ENDCASE.
regard,
sandeep patel
reward point if helpful

Two Graphs in a single screen

Hi Experts,
I want to display two graphs in a single screen. It should be a pie chart.
Currently I did one pie chart using GRAPH_MATRIX_2D.
It is working fine.
But i want to display another PIE Chart within the same screen.
Can anyone help me sort out?
Thanks in advance

Hi Vimal,
Go throungh the following code. it will help you.
REPORT Z_3DGRAPH.*structure declaration for performance measurementTYPES: BEGIN OF ty_performance,
      company(15) TYPE c,
      q1 TYPE i,
      q2 TYPE i,
      q3 type i,
      q4 type i,
      END OF ty_performance.*structure declaration for options table
types : BEGIN OF ty_opttable,
        options(30) TYPE c,
        END OF ty_opttable.*Internal table and work area declarations
DATA: it_performance TYPE STANDARD TABLE OF ty_performance,
      wa_performance TYPE ty_performance.DATA : it_opttable type standard table of ty_opttable,
       wa_opttable type ty_opttable.*initialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.*clearing the work areas
CLEAR WA_PERFORMANCE.
CLEAR wa_opttable.*appending values into the performance internal table
wa_performance-company = 'Company A'.
wa_performance-q1      = 78.
wa_performance-q2      = 68.
wa_performance-q3      = 79.
wa_performance-q4      = 80.append wa_performance to it_performance.wa_performance-company = 'Company B'.
wa_performance-q1      = 48.
wa_performance-q2      = 68.
wa_performance-q3      = 69.
wa_performance-q4      = 70.append wa_performance to it_performance.wa_performance-company = 'Company C'.
wa_performance-q1      = 78.
wa_performance-q2      = 48.
wa_performance-q3      = 79.
wa_performance-q4      = 85.append wa_performance to it_performance.*appending values into the options internal tablewa_opttable-options = 'P3TYPE = TO'.
APPEND wa_opttable TO it_opttable.wa_opttable-options = 'P2TYPE = VB'.
APPEND wa_opttable TO it_opttable.wa_opttable-options = 'TISIZE = 1'.
APPEND wa_opttable TO it_opttable.*calling the graph function module
CALL FUNCTION 'GRAPH_MATRIX_3D'
    EXPORTING
      col1      = 'Quarter 1'
      col2      = 'Quarter 2'
      col3      = 'Quarter 3'
      col4      = 'Quarter 4'
       dim1      = 'In Percentage%'
      set_focus = 'X'
      titl      = 'Company Performances'
    TABLES
      data      = it_performance
      opts      = it_opttable
    EXCEPTIONS
      others    = 1.
Regards,
Rajesh Kumar

How to join two hiearchy in a single report

Hi,
I have two hiearchyes on two master data objects, How best can i customise to view this two hiearchies in a single report.

Hi Nagendra,
Find the below links and blogs..
May be this will helps you
A BW hierarchy has the following properties:
Hierarchies are created for basic characteristics
Hierarchies are stored in special master data tables. They behave in a similar way to master data,
and can therefore be used and modified in all Info Cubes.
You can define several hierarchies for a single characteristic.
A hierarchy can have a maximum of 98 levels.
http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a670fe07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b07849c7-3a5b-2b10-7586-c431d300a578
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20a709c1-0a8e-2a10-21b4-f779728c63bf
/people/vijay.vijayasankar/blog/2008/03/13/crm2007-who-gets-to-see-what--some-strategies-for-managing-internal-and-external-users-part-1
/people/shafiq.rehman3/blog/2008/01/22/hr-interface-toolbox--pu12
/people/kamal.khanna/blog/2008/07/09/managing-data-of-most-valuable-asset-of-an-organization-employees
Regards
Sudheer

Two Batch in a Single Bin_ Specific requirement

Similar Messages

Maybe you are looking for