Two bugs in my display

I have two corn flies behind the glass of my flat panelled iMac. I live opposite a farmer's field of wheat and they crept in during the summer just before the harvest!
Is there any way of removing the glass to remove them - they are only tiny, but it is a bit annoying having the blighters in full view all the time?

No you can't remove the "glass" (it's actually plastic.) Don't even try to take apart your monitor. Don't try to smush them by pushing the screen that might just make it worse. You might have to take it into Apple and let them take apart your screen and fix it, that's all I can think of.

Similar Messages

Does anyone have two 24" LED Cinema Displays on their Mac Pro?

I'm wondering if there are any other Mac Pro users out there with two 24" LED Cinema Displays? If so, are you able to adjust the brightness of both displays? For me, no matter which brightness slider I adjust in System Preferences, only the brightness of one of the displays is adjusted.
I originally created a thread last September:
http://discussions.apple.com/thread.jspa?threadID=2160532
If you have this problem too, please report it to <http://bugreporter.apple.com/>. My original Radar bug was #7222745, and it was found to be a duplicate of #6828443. Based on the IDs, I'd say this has been a known issue for at least a year.
Thanks,
Patrick

I am using logitech G19 mouse and Naga Razer Epic, my current suspect that is their official driver which make my OS X 64bit kernl go nut. Does Logitech Control Center work for later version of their products such as G19?
If I plggued in the G19 without installing their official gamepanel software, The heyboard still work, volume control slider works like a charm. I just get no advantages from the LCD screen (kind of pointless).
If I install the razer mac driver, I keep seeing error log in console for the kzcorengineand razercorenginer process.
Idid clean install of Mac OS X and have not experienced freeze except once when I was plugging in my 500gb transcend external drive. This Ext. Drive require two usb slot for power and transfer data.
I am not sure if the freeze was coincidental or related to the transcend external drive I used. I did a directory permission repair and a repair to the mac drive, how things seems to stabilised.
However I want to take my test further to install office 2011 to see if it cause those random unpredictable freeze again.
Sigh, I paid $200 for such a good keyboard, but they have bad apple support. I dont like the apply ketyboard and magic mouse. It's immpossible to touch type on and even harder to play any game at all.
Wayne, when you use your logitech product, do you install the product specific driver for each product plus LCC? or you just install LCC.
Thank you

Adjusting brightness with two 24" LED Cinema Displays

I'm wondering if there are any other Mac Pro users out there with two 24" LED Cinema Displays? If so, are you able to adjust the brightness of both displays? For me, no matter which brightness slider I adjust in System Preferences, only the brightness of one of the displays is adjusted.
I originally created a thread last September:
http://discussions.apple.com/thread.jspa?threadID=2160532
If you have this problem too, please report it to <http://bugreporter.apple.com/>. My original Radar bug was #7222745, and it was found to be a duplicate of #6828443. Based on the IDs, I'd say this has been a known issue for at least a year.
Thanks,
Patrick

I filed a bug report at bugreporter.apple.com, and received a pretty quick reply:
This is a follow up to Bug ID# 7222745. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 6828443. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.
Looks like I'm S.O.L. until they fix this!

Controlling brightness on two 24" LED Cinema Displays

I have an 8-core Mac Pro from this summer with two NVIDIA GeForce GT 120 cards and two 24" LED Cinema Displays. I'm running Snow Leopard 10.6.1, and when I try to adjust the brightness, the slider on both panels controls only one monitor. I therefore can't adjust the brightness of one of my displays. Has anyone found this?

I filed a bug report at bugreporter.apple.com, and received a pretty quick reply:
This is a follow up to Bug ID# 7222745. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 6828443. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.
Looks like I'm S.O.L. until they fix this!

Can a Mac mini support video to two 30" apple studio displays?

Can a Mac mini support video to two 30" apple studio displays at the same time? If so, how do you do it and what resolution can be acheived for each monitor?

Hi Brian,
Nope, or not very well...
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).

I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback

Two bug fixes for DeferredWrite databases

Hi all,
If you are using DatabaseConfig.setDeferredWrite(true) to configured a deferred write database, you will be interested in two recent bug fixes. These fixes will be in the next patch release (JE 3.2.69 and later), but we haven't decided when that release will be made. In the mean time, please email me (mark.hayes at the obvious .com) and I'll make these fixes available to you.
The change log entries for the two bugs are below. Note that first bug can cause data loss, since a log file is incorrectly deleted by the log cleaner.
# Fix a bug that could cause LogFileNotFoundException when using a Deferred Write database (DatabaseConfig.setDeferrredWrite(true)). The bug could occur when a Deferred Write database was opened sometime after opening the Environment. The bug was very unlikely to occur if all Deferred Write databases were opened immediately after opening the Environment. [#15913]
# Fix a bug that could cause Database.sync to hang. This bug was introduced in JE 3.2.68. [#15920]
Thanks to Tyler (user611159) for working with us to diagnose these bugs and verify the fixes. He did many test runs over many days and supplied the log files we used to discover the bugs.
--mark

2. Logic 7.1.1 had an annoying bug in the event list
where if you selected, for example, four notes in the
matrix editor, only three would be highlighted in the
event list until you change their values. This seems
fixed, too.
Thanks for mentioning this.
Would you mind checking something else out? In the attached pic (from 7.1.1) I have 4 notes highlighted in the matrix editor but only 2 are highlighted in the event editor. This correlates more or less with the behavior you reported (3 notes highlighted) and which you say is fixed (and is great news!).
But notice where the SPL is positioned -- bar 1, beat 1. Yet in the event editor the pointer is aligned with "---Start of List---". In fact, when the sequence is played, the pointer is always aligned one event behind the currently playing event. This behavior has been a real problem.
So I'm wondering if that specific behavior is fixed in 7.2. Would you mind checking and letting me know if this has been fixed?
Thanks!
[Note the pointer in the Event Editor,
directly below, and what it is
pointing to at bar 1, beat 1]
G5, dual 2.7G, 2.5G RAM Mac OS X (10.4.3) LP7.1.1, MOTU 424/2408/1224 x 2
G5, dual 2.7G, 2.5G RAM Mac OS X (10.4.3) LP7.1.1, MOTU 424/2408/1224 x 2

Connecting a Dell Laptop to two 23in Apple Cinema Displays??

The Dell laptop has a DVI Output and an S-video plug available.
What do you recommend to hook up two 23in Apple Cinema Displays to the laptop?

Apple 20" Cinema LCD $799 (only DVI-D input) + vga ==> DVI converter $300 = $1099.
Dell 2005FPW 20" LCD $559.2 (vga + DVI + AV input)
LCD monitor test report:
http://graphics.tomshardware.com/display/20050830/index.html
http://graphics.tomshardware.com/display/20050706/index.html

Two 24" LED Cinema display and getting audio from both

I have two 24" LED Cinema displays connected to a MP. Is there a way to get the audio to play through the speakers on both displays at the same time? I can easily switch the USB audio to either display, but I cannot figure out how to play audio through both at the same time. Thank you for the help,

You can hijack the audio from any application, or the system audio, with Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
You can then use its Auxiliary Device Output effect to send the audio to multiple devices.

App store says I have two updates but noting displays

App store says I have two updates but noting displays? any one have any ideals, by the way this is happing on both of my ipad mini's.

Well, try this instead:
From Demo:
If you are getting the blank app update screen, many people are having this problem over the last couple of days.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.
I'm sure things will get straightened out with Apple's servers. Just learn to be patient.

Two bugs in Acrobat 9?

I'm trying out a Document in Acrobat 9. I found two apparent bugs.
On my PowerBook 17" I have installed correct Driver for my Printer a HP DJ 990cse. However when I go to set as default printer inside Page Setup within Acrobat 9 the is no indication of a printer. Yet when I go elsewhere such PDF Optimizer> advanced it shows the printer. Note I use printer Plugged into my Airport Express. Acrobat 8 has no problem with this setup.
Problem two: In the document I noticed a defect in one line with the letter "g" and attempted to use touch up text to retype it to see if I could repair the defect. well when I did the text drop a point or so below the line and completely messed up anything in the box.
My PowerBook 17 uses a display of 1400x900
IN suggestions?

Nemuri13 wrote:
Gentlemen - the workaround is to open Acrobat first. Then do a file > Open to open the file in Acrobat. If you do this then you should see your printers in the Page Setup. If you double-click on the PDF to open it in Acrobat then you will NOT see your printers. This seems to affect only 10.4.11 and not any version of 10.5. Good Luck!
For some reason this thread just showed up on new Forum System.
Anyway I tried your work around. Had no affect.

ITunes 7 bug in album display

I like the new display modes, but I've noticed a bug. If you are in the list mode, sorted by anything other than album, and then go into one of the two album modes, you get multiple copies of each album, many with one song in each. If the list mode is sorted by album, then the album mode comes up correctly. What it seems to do is compress the list mode display, so if multiple songs for the same album are not next to each other in the list, they display as if they were in different albums.
It wasn't clear at all how to report this bug to Apple...

I think you're thinking like a computer geek, rather than a user. When I see a picture of an album cover, I expect it to show me all of the songs in the album. And, in fact, I have since discovered, that if you are in the odd mode where songs are sorted by something other than album, and you see multiples of each album, and you then click on an album cover, it not only immediately re-sorts to "by album" and shows you all the songs in the album you clicked on, but the array of album covers displayed also converges into one cover per album. I guess as a user I was expecting it to start out looking like this in the first place.

Two bugs with 27++ battery behaviour

Bug 1:
55++ and 27++ batteries are both connected. However, the 27++ "lock switch" is not on, and the message "Important information about the slick battery"..."To use the slice battery, the battery must be locked" will appear (this is expected). The system in this case will start discharging the 55++ (this is expected). However, when the 55++ battery drops to 0%, the system then start discharging from the 27++ battery...even when then "lock switch" is off. (This is unexpected)
So, is the popup message incorrect? Or is the behaviour incorrect?
Bug 2:
Power manager's battery icon considers the total amount of charge of both batteries even when the lock switch is off on the 27++. Relating back to bug 1, when the 55++ battery discharges to a warning level (3% is what I've set mine to), the alarm and events will kick in (this is correct, because even though the 27++ is at 100% charge, the switch is off, and the system should only consider the 55++ as functional). However, the battery indicator icon (on the taskbar) of Power Manager and the "Total remaining battery" time & percentage considers BOTH the 55++ and 27++ batteries. So, rather than displaying 3% and around 4 minutes, Power Manager displays 52% and 6 hours (this is unexpected).
Lenovo, please fix this. The user's experience should be consistent.
System: 4282-CTO
BIOS: 1.36
OS: Windows 7 Pro 64bit
Power Manager: 3.66
PM Driver: 1.64

someotherguy wrote:
The switch should be in the locked position whenever the slice battery is attached. If it is not, Power Manager will warn you, but it won't let your system die just because you forgot to flip a switch. That would be a terrible design.
Sorry you are disappointed with the way the slice battery fits.
Yes, that I totally agree with. In which case, it prompts the question of "Is there any electronic reasoning for the existance of the lock switch?". The other two purposes of the lock swich I can see are:
1. It changes the order of dischange between the 27++ and the 55++.
2. It "locks" the battery in.
So, the 27++ battery actually "functions" as a fully functional battery regardless of the lock switch's state. Isn't it? This conficts with the popup message prompt.
Then the next thing is, Windows would report 0% as soon as the 55++ is dischanged...but the system would continue to use the 27++...which, IMO, is a conflict of information presented to the user. While the battery indicator is a Windows feature, I believe Lenovo should remedy this difference in the reported capacity.
Another question...is there a UX QA department somewhere?

Upraded to 10.5.6 and two of my four displays are no longer "detectable"

I was happily running 4 displays from my 2 graphics cards (9600XT and 9200) under 10.3.9. 3 x DVI (one of which is with the ACI adapter) and 1 running via VGA to a plasma TV. The 3 displays running from DVI were all "name" recognized in System Preferences and all resolution options were available under 10.3.9.
I have now upgraded to 10.5.6 (and subsequently 10.5.8 in case that solved the issue) and suddenly two of the displays aren't recognized and I am only given a single, low resolution option, if I press "Detect" is does nothing but if I untick the button to show me all Colour profiles..there are all my original profiles with the names of the displays but you can't select them per se. - also on these two affected displays, display the Leopard background (the Universe pic) is mainly blue - almost like when you have a loose cable (but they are not). It's almost like the black and yellow has been take out. Both screens are "usable" in that you can clearly read them just one is now in 640 x 400 ( I think) and the other in 1024 x 768 (24" Widescreen Dell).
The problem is not card specific i.e. it seem to effect one socket from each card - the VGA on the stock Apple ATI card and one DVI on the ATI 9200
I have tried swapping the displays between the cards and when I do the alternate display is then recognized so it can't be a problem with any of the displays either.
Any ideas? I need all 4 displays running in their respective resolutions (and without a blue screen) for Logic screenshots.
Message was edited by: Pipmeister

Ok.. tried the Sysresex that fixed others HDMI Mac Mini problem - but that didn't work. It can't be a problem with Application Enhancer as I didn't have that installed, although I do now just to see if it made any difference.
I have tried unseating and reseating both video cards and nothing. I know it's not the drivers for the displays as they work when swapped.

Subtract sum of two columns in two different tables and display balance for each row

Hello Friends,
I have the below 5 tables
1. STUDENT (STUDENT_ID, NAME)
2. DEPARTMENT (DEPT_ID, NAME, CONTACT_PERSON, PHONE)
3. SECTION (SECTION_ID,SNAME,DEPT_ID,Acad_LEVEL,SHIFT,TIME,ROOM)
4. TUITION_BILL (Seq_No, STUDENT_ID, DEPT_ID, Acad_Level, SECTION_ID, SEMESTER, Acad_Year, BILL_DATE, GROSS_AMT_DUE)
5. TUITION_PAYMENT (Seq_No,RECEIPT_NO,STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,SCHOLARSHIP,PAYMENT_DATE,PAYMENT_AMT,REFERENCE,REMARKS)
I wrote the following query
SELECT T.Seq_No,T.STUDENT_ID,S.NAME As STUDENT_NAME,d.name As DEPT,T.Acad_Level,c.SNAME As SECTION,
T.SEMESTER,T.[Acad_Year],BILL_DATE,GROSS_AMT_DUE,
COALESCE(SUM(T.GROSS_AMT_DUE),0)-COALESCE(SUM(PAY.PAYMENT_AMT),0)- COALESCE(SUM(PAY.SCHOLARSHIP),0) As BALANCE
FROM TUITION_BILL T JOIN STUDENT S ON S.STUDENT_ID=T.STUDENT_ID join DEPARTMENT d on d.DEPT_ID=T.DEPT_ID
join SECTION c on c.SECTION_ID=T.SECTION_ID LEFT JOIN (SELECT DISTINCT STUDENT_ID,COALESCE(SUM(p.PAYMENT_AMT),0) As PAYMENT_AMT,
COALESCE(SUM(P.SCHOLARSHIP),0) As SCHOLARSHIP FROM TUITION_PAYMENT p GROUP BY p.STUDENT_ID) As PAY ON PAY.STUDENT_ID=T.STUDENT_ID
WHERE s.STUDENT_ID='138218' GROUP BY T.Seq_No,T.STUDENT_ID,S.NAME,d.NAME,T.[Acad_Level],c.SNAME,T.SEMESTER,
T.[Acad_Year],BILL_DATE,GROSS_AMT_DUE,PAYMENT_AMT,SCHOLARSHIP
The above query shows the below output
Seq_No
STUDENT_ID
STUDENT_NAME
DEPT
Acad_Level
SECTION
SEMESTER
Acad_Year
BILL_DATE
GROSS_AMT_DUE
BALANCE
1
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
One
2014-2015
1/10/2014
200
0
5638
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
Two
2014-2015
3/20/2015
200
0
There are two records in the TUITION_BILL table with different Semesters and bill dates for the specified student_id and there is only one record in the TUITION_PAYMENT table which is the semester one payment record. Semester two payment record
is not recorded yet and I want to display the balance like the following output instead of the above output.
Seq_No
STUDENT_ID
STUDENT_NAME
DEPT
Acad_Level
SECTION
SEMESTER
Acad_Year
BILL_DATE
GROSS_AMT_DUE
BALANCE
1
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
One
2014-2015
1/10/2014
200
0
5638
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
Two
2014-2015
3/20/2015
200
200
The above query is working fine but I'm facing only one problem with it which its showing 0 balance for both records instead of different balances like the above desired output.
Please help me in getting the desired result.
Any help would be appreciated.
Thanks in advance,
Mohamoud

Thanks a lot Pituach for your reply; below I posted the script for the database and table creation and inserting sample data into the tables.
CREATE
DATABASE TESTdb
GO
USE TESTdb
CREATE
TABLE [dbo].[STUDENT](
      [STUDENT_ID] [int]
NOT NULL,
      [NAME] [varchar](40)
NULL,
PRIMARY
KEY CLUSTERED
      [STUDENT_ID]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[DEPARTMENT](
      [DEPT_ID] [int]
IDENTITY(1,1)
NOT NULL,
      [NAME] [varchar](30)
NULL,
      [CONTACT_PERSON] [varchar](40)
NULL,
      [PHONE] [int]
NULL,
CONSTRAINT [PK__DEPARTME__512A59AC03317E3D]
PRIMARY KEY
CLUSTERED
      [DEPT_ID]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[SECTION](
      [SECTION_ID] [int]
IDENTITY(1,1)
NOT NULL,
      [SNAME] [varchar](40)
NOT NULL,
      [DEPT_ID] [int]
NOT NULL,
      [Acad_Level] [varchar](30)
NULL,
      [SHIFT] [varchar](20)
NULL,
      [TIME] [varchar](20)
NULL,
      [ROOM] [varchar](20)
NULL,
CONSTRAINT [PK__SECTION__92F8069507020F21]
PRIMARY KEY
CLUSTERED
      [SECTION_ID]
ASC,
      [DEPT_ID]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[TUITION_BILL](
      [Seq_No] [int]
IDENTITY(1,1)
NOT NULL,
      [STUDENT_ID] [int]
NOT NULL,
      [DEPT_ID] [int]
NOT NULL,
      [Acad_Level] [varchar](50)
NOT NULL,
      [SECTION_ID] [int]
NOT NULL,
      [SEMESTER] [varchar](50)
NOT NULL,
      [Acad_Year] [varchar](50)
NOT NULL,
      [BILL_DATE] [date]
NULL,
      [GROSS_AMT_DUE] [decimal](18, 2)
NULL,
CONSTRAINT [PK_TUITION_BILL]
PRIMARY KEY
CLUSTERED
      [STUDENT_ID]
ASC,
      [DEPT_ID]
ASC,
      [Acad_Level]
ASC,
      [SEMESTER]
ASC,
      [Acad_Year]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[TUITION_PAYMENT](
      [Seq_No] [int]
IDENTITY(1,1)
NOT NULL,
      [RECEIPT_NO] [int]
NOT NULL,
      [STUDENT_ID] [int]
NOT NULL,
      [DEPT_ID] [int]
NOT NULL,
      [Acad_Level] [varchar](50)
NOT NULL,
      [SECTION_ID] [int]
NOT NULL,
      [SEMESTER] [varchar](50)
NOT NULL,
      [Acad_Year] [varchar](50)
NOT NULL,
      [SCHOLARSHIP] [decimal](18, 2)
NULL,
      [PAYMENT_DATE] [date]
NULL,
      [PAYMENT_AMT] [decimal](18, 2)
NULL,
      [REFERENCE] [varchar](50)
NULL,
      [REMARKS] [varchar](max)
NULL,
CONSTRAINT [PK_TUITION_PAYMENT]
PRIMARY KEY
CLUSTERED
      [Seq_No]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
USE TESTdb
INSERT
INTO STUDENT(STUDENT_ID,NAME)VALUES(138218,'Abdirahman
Dhuh Gamadid')
INSERT
INTO DEPARTMENT(NAME,CONTACT_PERSON,PHONE)VALUES('Agriculture
and Veterinary','Mohamoud Abdilahi','065')
INSERT
INTO SECTION(SNAME,DEPT_ID,Acad_Level,SHIFT,[TIME],ROOM)VALUES('2A',1,'Year
2','Morning','8:00-10:00','Room 1')
INSERT
INTO TUITION_BILL(STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,BILL_DATE,GROSS_AMT_DUE)
VALUES(138218,1,'Year
2',1,'One','2014-2015','2014-09-10',200.00)
INSERT
INTO TUITION_BILL(STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,BILL_DATE,GROSS_AMT_DUE)
VALUES(138218,1,'Year
2',1,'Two','2014-2015','2015-01-10',200.00)
INSERT
INTO TUITION_PAYMENT(RECEIPT_NO,STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,SCHOLARSHIP,
PAYMENT_DATE,PAYMENT_AMT,REFERENCE,REMARKS)VALUES(1,138218,1,'Year
2',1,'One','2014-2015',0.00,'2014-10-10',200.00,'N','N')

Two bugs in my display

Similar Messages

Maybe you are looking for