Two cameras at the same time Lab view (NI MAX)

I have two similar Point Grey Firefly MV cameras. I need to use them simultaneously in LabVIEW, but NI MAX only detects one at the same time (the two cameras are detected properly separately). I think that NI MAX identifies both camera as the same camera, but I dont know how to change the name of one of those cameras, or maybe change the serial number. Also NI MAX gives the same serial number to both of them. I would apreciate your help
Thank you.

Hi Aurelio,
This is a commom issue for USB Cameras. Once IMAQdx calls the camera driver to acquire image, if the camera driver cannot acquire from 2 cameras, IMAQdx cannot acquire from 2 cameras too.
You can ask to camera vendor about how the camera driver works.
http://digital.ni.com/public.nsf/allkb/D13527D8471D5FC5862576A4006BD081?OpenDocument
Regards,
Abel Souza
Engenheiro de Aplicações
National Instruments Brasil

Similar Messages

  • How can I compare two collections at the same time? (View two grid views)

    I have two collections containing some of the same images. (My Nikon D70 did not put an end-of-file on some images. I recovered them into a different collection.) Now I want to display both collections side-by-side in grid view. I will select those images in the "recovered" collection that correspond to the bad images in the "main" collection, add the ratings etc, and move just these to another collection.
    It is extremely frustrating to have to bounce back and forth between collections, remembering each image one by one and selecting it in the "recovered" collection. (The image names are not preserved in the "recovered" collection -- I have to go by what the image looks like.)
    LightRoom allows me to compare photos in the compare view. I want to compare collections in two grid views.

    CaptureTheLight,
    you have ran into a situation when you have to compare two sets of images and now you're wondering how come Lightroom doesn't have such "obviously necessary" functionality? But you have to admit it, this is not such a common situation in a photographer's workflow recovers broken files and tries to compare them against themselves. I think it's a pretty specific feature you need. Still, Lightroom has enough powerful tools for editing and sorting images.
    For example...
    You could just put them all - "main" and "recovered" - into a single collection or into the Quick Collection. Label the entire "recovered" collection with, say, red and sort by capture time. Now you'll have everything side by side, ordered chronologically. The "recovered" images will stay next to the "main" images since their capture time will be the same, and they will also stand out since they have the red label.
    Make the thumbnails bigger and set up the grid view so it tints the thumbnail cell are tinted with the label color. Now, you can go quickly through them visually checking labeled vs unlabeled.

  • Cannot use two iSight cameras at the same time

    I use an external display on my laptop. Close the lid and work on the external display. I connect an external iSight, and a message says that the camera is already in use?!
    Can I not use two iSights at the same time?

    Hello Webmaster
    You can have two iSights connected at one time, but, as explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by one application at a time. (my emphasis) Check for any running applications, Login Items, or widgets that can use your iSight. (It is easy to forget widgets like Mirror in your Dashboard.)
    Different apps select between multiple connected cameras in different ways. For instance, you use iChat > Preferences... > Video settings to select which camera to use, but iMovie 6 uses a drop-down menu as shown in this picture:
    The suggestions in How to Troubleshoot iSight should help you determine whether one of your iSights is causing trouble. I suggest you test each one separately and without your external display or other peripherals to rule out possible conflicts like the one that user BombCreative reports in his post at http://discussions.apple.com/message.jspa?messageID=5868843#5868843
    After you are certain that your iSights are working individually, test them when both are connected. After your system successfully passes these tests, you can add your external devices back one-by-one to be sure one of them is not causing the problem.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • If I have two appointments at the same time, they overlap in the iOS 7 calendar rather then appearing side-by-side so that I can't read one of them due to the identical colors of the two appointments.  Is there any way to fix this with a setting?

    If I have two appointments at the same time, they overlap in the iOS 7 calendar rather than appearing side-by-side in the daily view, so that I can' read both of them due to the same background color.  Is there a way to change this via a settings change?

    I fyou have "all day" event that are taking up the entire day, check the event. All day event only appear at the top of the time line (and just below the week view). I suspect they are not actually set up as all day, but have specific time frames assigned.
    In teh screen shot below, "Sample" is an all day event; NFL: CAR@SF is not.

  • Two images at the same time

    Hi!
    I'm new into FCE and I would like to ask for some help. Can I work with two images at the same time? I mean, Can I superimpose two images to make one? How can I do it?
    Maybe this is something easy, but I'm just starting,
    thanks in advance for your answers
    Message was edited by: angelcotallo

    Yes, you can. You can put one clip on top of the other in the timeline. You can make both clips visible by reducing the opposite of the clip or top, or by scaling back the clips so they are smaller. You can reduce the opacity and scale of the clips in the viewer by opening the clips from the timeline into the viewer. You can also scale the images directly in the canvas when it is in Image+Wireframe mode.

  • Singletons running on two servers at the same time

    Hello,
              we faced one interesting situation with our application, running on clustered BEA Weblogic 9.2. We implemented some Singletons (ie. Singleton Service in a Weblogic cluster) and they are running fine. Most of the time.
              Common scenarios: cluster is started -> the singletons run on one server; the server is brought down -> the singletons are started on the second server.
              However, we had recently two situations where the Singletons started on both servers! Here they are:
              1) We use Database Migration Basis and we have a dedicated table for Weblogic to capture current state of the singletons. Due to the fact that database (Oracle RAC) was partially available one of the Managed Server could not get the lease and probably assumed that no singleton is running, therefore started the singletons locally.
              2) Network outage: we had several minutes where none of our servers could communicate between them (neither between SASU MS nor with the database). Consequence: each MS decided to start the singleton locally (after some time, which I assume is the waiting time). Once the network came back the servers could communicate again but the duplicate singletons are not deactivate, so they are running in parallel.
              Anyone experienced the same or similar issues? How to prevent the above? Is the Consensus Migration Basis a better choice? (I think yes for #1 but not for situation #2).
              Any helpful answer is appreciated.
              Thank you, best regards,
              Remus.

    In general its not a good idea.  Running PSConfig will try to establish a lock on the configuration database.  Doing that from two servers at the same time may cause the update to fail.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Write a progarm to test two parts at the same time

    Hi:
    I need to write a program in LabView that is capable of testing two parts at the same time.
    Explanation:
    I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
    I am using LabView 2012

    From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
    www.ni.com/teststand
    Ryan
    Ryan
    Applications Engineer
    National Instruments

  • Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

    Can I show two angles at the same time in the final edit rather than alternate with Multicam?

    Stack two clips on top of each other and reduce the sizes. I think that's what you want.

  • One again, "can I use CC on two computers at the same time?" - in practice.

    I know this has been asked before and all those threads are locked. Many asked the question, but I haven't found a satisfying answer yet.
    Can I multi task with CC?
    I want to have my laptop next to my desktop. And while I render, export or whatever my newly shot documentary on the laptop I want to work with a music video project on my desktop. Then when the render is finished I render the music video and go back to the laptop and continue on the documentary. Or maybe I just work 5 minutes on the desktop music video, then come up with something brilliant for the project on the laptop and switch. Back and forth. Will that kind of activity result in any kind of limitation, usage-wise?
    So, working on Premiere on my two computers at the same time.. is it possible? Technically? I know the EULA says "only one person". But will it let one person mutli task?
    I need to know this before I buy. sorry for asking this again, please bless me with a clear answer

    Hi Jimmy Crim,
    Yes in case of Creative cloud subscription you are allowed to install and use the cc apps in any two machines.
    Even if you want you care allowed to use these apps together in both the machines.
    Thanks
    Kapil

  • Can I access two websites at the same time?

    Does Dreamweaver have the ability to open two websites at the same time?
    I basically have a CMS hosted on one server, that connects to my clients sites on other servers. I want to be able to open files on one server and edit them and also edit files on another server at the same time.
    If this isn't available in Dreamweaver, then I think it should be. I often need to copy code from one page in a site to another page in different site. To have the ability to have two windows open, each connected to a different website server would be invaluable to me. By having separate windows, each can have its own server connection. I don't know how easy that would be, but I'd love it!
    Cheers
    Glynn

    You can only connect to one site at a time.  And you need to edit files locally, save & then upload to the remote server.   AFAIK, no single FTP app is capable of connecting to more than one server at a time.  You might be able to do what you want with DW open and an additional 3rd party FTP client like Filezilla, each connecting to different servers.
    Nancy O.

  • How can I open two libraries at the same time on itunes?

    Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

    Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
    tt2

  • How can I start two Vi at the same time?

     I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.

    One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
    Message Edited by Dennis Knutson on 03-20-200609:35 AM
    Attachments:
    Run Method.JPG ‏44 KB

  • How to make this two things at the same time ?

    Hello
    When my mouse is on a area, I need :
        -  to show a object (a rectangle inserted with the toolbar)
        -  to show a caption
    I think it's not possible to do this two things at the same time when I use the rollover functions (Rollover caption or Rollover Image).
    I would like to use a button, but the button works only if I click it, and not when I just pass my mouse on it.
    Someone have an Idea?
    I can't use Javascript.
    Thanks

    Rick is correct.  You can use the Rollover Slidelet's rollover area to trigger an Advanced Action.  You'll need to create this Advanced Action with two clauses.  One to SHOW the caption, and the other to SHOW the rectangle.
    Your alternative to the rollover slidelet is to use an Event Handler widget attached to the object that the mouse should roll over.
    The Event Handler will detect when the mouse is over the object and trigger its own Success criteria.  You can then use the widget's ON Success event to trigger the Advanced Action as mentioned above.
    More information about using the Event Handler here: http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
    An example of using it to do two different things on the same object can be found at this web page: http://www.infosemantics.com.au/adobe-captivate-advanced-elearning-tutorials/beat-adobe-ca ptivate-interactive-catch22
    Trial versions of the widget can be downloaded from here:  http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

  • Any way to play two clips at the same time one over the other? (transprent)

    Any way to play two clips at the same time one over the other? (transprent)

    Yes.
    See the information here for a variety of ways to do this:
    http://discussions.apple.com/thread.jspa?threadID=933500&tstart=50
    http://discussions.apple.com/thread.jspa?threadID=903151&tstart=0
    http://karsten.schluter.googlepages.com/jackiechancredit
    http://www.geethree.com/slick/V_04.html

  • Re: if weblogic can serve two ports at the same time?

    That's not true. WebLogic supports a non-secure and secure listener port at the
    same time. That was one of the selling points for my organization.
    Michael Girdley wrote:
    If, you mean the same port on two different IP addresses, then the answer is
    yes.
    If, you mean two different ports on the same IP address, then the answer is
    no.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    fxy <[email protected]> wrote in message
    news:8fdk99$t9$[email protected]..
    <URGENT QUESTION>
    I'd like to know if weblogic can support two ports at the same time.
    thank you in advance.
    <URGENT QUESTION>

    Well, the question was really meant to see if any change was made to WL to support
    this, not because I didn't believe Michael Girdley.
    P.S., this is something Websphere 4.0 let's you do...In case this encourages someone
    to add this support.
    "Mike Reiche" <[email protected]> wrote:
    >
    If you don't believe Michael Girdley, then I don't know why you would
    believe anyone
    else. I believe the answer is still 'no'.
    Why do they 'have to be on different ports'? We block requests by URI
    - so just
    block all requests to /youradminapp/* at the firewall. Or you can block
    them at
    your Web Server. Or restrict them by user in WL.
    Mike
    you"Anil Arora" <[email protected]> wrote:
    Is it still true that WL 6.0 cannot host multiple (non-secure) HTTPports
    on one
    server? We need this capability within one JVM to allow one web application
    to
    be accessed from one port while another through a second port. Forexample,
    we
    have a application to be exposed through the firewall at port 7001.
    Then we have
    another admin application to only be accessed within the firewall. But
    they need
    to be deployed within the same JVM since they may have shared statebetween
    them.
    Thanks,
    Anil
    "Michael Girdley" <[email protected]> wrote:
    I'm sorry, to clarify my statement: I was speaking about nonsecure
    communications. Weblogic can only support one listener port at a time.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    Allen Akers <[email protected]> wrote in message
    news:[email protected]...
    That's not true. WebLogic supports a non-secure and secure listenerport
    at the
    same time. That was one of the selling points for my organization.
    Michael Girdley wrote:
    If, you mean the same port on two different IP addresses, then
    the
    answer is
    yes.
    If, you mean two different ports on the same IP address, then theanswer
    is
    no.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    fxy <[email protected]> wrote in message
    news:[email protected]...
    <URGENT QUESTION>
    I'd like to know if weblogic can support two ports at the same
    time.
    thank you in advance.
    <URGENT QUESTION>

Maybe you are looking for