Two clips overlayed and playing at the same time..

Hello!
Is there anyway to play two clips at the same time?
The same way cross-disolve layers the images??
a thousand thanks!!

Hi (again)
I figured it out.. So if anyone is interested, all you have to do is go to Modify and then change the composite mode to Overlay. Then it has to be rendered. Piece of cake!!
Thanks!

Similar Messages

IPod Touch 4g won't charge and play at the same time

I used to have a 4g Nano that I would play in my car through an aux cable and charge through a cigarette lighter charger. I just got a 4th gen iPod Touch and it no longer lets me charge and play at the same time. If both wires are connected it will only charge and not play, once I pull the charger part out it will play through the speakers. Is there a fix to this? Do I need a different charger so that it won't think it's simply docked?

You would need to turn off hard drive mode via iTunes iPod settings on your home system to do this. I don't know if you have this mode on or off already. I thought I read that there is a way to enable/disable hard drive mode via the iPod buttons but I don't remember how.
Thanks,
Steven

Save a movie and play at the same time

HI. Am having a problem to save a movie(both video and audio) to a temporary file and playing from that temporary file at the same time.
Infact the movie in coming from a server. Am using AVReceive2 to receive the movie. The temporary file will be growing while am playing it.
Can anyone help me? PLZ.

Hi all,
I have a problem,
I have managed to create a player and a processor that plays and records live video and audio(i have merged the datasources at the sender).
when i create a clone for sinking the video, i donot get track[1] (audio) control of the processor.
i think the problem is with cloning. when i gave the player the clonable interface instead of the original DS, it also did not give any audio.
thanks ahead for your help

Cannot download content and play at the same time

Hello Again,I am not sure if this is thanks to the last update but during this week I have not been able to download a game and play others game at the same time.I leaved the game downloading then went to play something (online or campaign) and a couple of minutes later the game that I was downloading appear with an error cannot download, error connection etc.I checked my network and is fine, even purchased a new router with the same results.Is somebody else experiencing this problems or know a solution for this?

Hello Apparently the problem was the game I was downloading i downloaded 2 games today an no error

HT1222 The music in my iTunes library run together and play at the same time.

The music in my iTunes library run together andplay at the same time.

The "bar" at the bottom does not say anything about all of your songs being on the iPod. It just shows you how much of its storage capacity is being used, based on what is on the iPod.
If you see "On This iPod," that means the iTunes sidebar (along left side of window) is not visible. This is easier to describe with the sidebar visible, so from the iTunes menu bar, under View, select Show Sidebar.
Select the iPod in the sidebar, under DEVICES. There is a bar of buttons near the top, starting with Summary. Click on Music next to Summary. This is the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. You can choose to sync Entire music library, if (?) your iTunes music library fits on the iPod. With this setting, your entire iTunes music library syncs to the iPod, and new songs get synced automatically. A 7th gen iPod nano is 16GB, so your iTunes music library would have to be less than 16GB (not counting non-music content on the iPod). Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. Then, select (checkmark) the playlists, artists, albums, and/or genres you want on the iPod from the lists below. If you want newly added songs to sync to the iPod, they must be part of your selection. For example, you can add them to a playlist that you have selected for syncing to the iPod.
When you click Apply, the songs from your selection sync to the iPod. Going forward, changes to your iTunes library (based on your settings on the iPod's Music screen) sync automatically to the iPod, the next time it is connected (or when you click Sync).

Multiclips and multiple audio tracks playing at the same time

I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
G5 Mac OS X (10.4.3) Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

...

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
NOTE: You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

Reading and recording at the same time with AudioUnit

Hi,
I am trying to read and record at the same time on the iPhone with AudioUnit. For the reading part I made an AUGraph which works fine, constructed like that:
NewAUGraph(&_graph);
_outputUnitComponentDescription.componentType = kAudioUnitType_Output;
_outputUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_outputUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_outputUnitComponentDescription.componentFlags = 0;
_outputUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_outputUnitComponentDescription, &_outputNode);
_mixerUnitComponentDescription.componentType = kAudioUnitType_Mixer;
_mixerUnitComponentDescription.componentSubType = kAudioUnitSubType_MultiChannelMixer;
_mixerUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_mixerUnitComponentDescription.componentFlags = 0;
_mixerUnitComponentDescription.componentFlagsMask = 0;
AUGraphAddNode(_graph, &_mixerUnitComponentDescription, &_mixerNode);
AUGraphConnectNodeInput(_graph, _mixerNode, 0, _outputNode, 0);
AUGraphOpen(_graph);
AUGraphNodeInfo(_graph, _outputNode, NULL, &_outputUnit);
AUGraphNodeInfo(_graph, _mixerNode, NULL, &_mixerUnit);
_generatorUnitComponentDescription.componentType = kAudioUnitType_MusicDevice;
_generatorUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
_generatorUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
_generatorUnitComponentDescription.componentFlags = 0;
_generatorUnitComponentDescription.componentFlagsMask = 0;
for(int i=0; i< [_urlList count]; i++)
SoundBuffer* soundBufferTemp = [_bufferSoundList objectAtIndex:i];
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyFileRenderCallback;
renderCallbackStruct.inputProcRefCon = soundBufferTemp;
AudioStreamBasicDescription* inputAsbd = [soundBufferTemp getASBD];
err = AudioUnitSetProperty(_mixerUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
i,
inputAsbd,
sizeof(AudioStreamBasicDescription));
UInt32 zero = 0;
err = AudioUnitSetProperty(_mixerUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&zero,
sizeof(zero));
err = AUGraphSetNodeInputCallback(_graph,
_mixerNode,
i,
&renderCallbackStruct);
This works well, for the recording AudioUnit I did the following:
OSStatus err;
AudioComponentDescription audioComponentDescription;
AudioComponent audioComponent;
audioComponentDescription.componentType = kAudioUnitType_Output;
audioComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
audioComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
audioComponentDescription.componentFlags = 0;
audioComponentDescription.componentFlagsMask = 0;
audioComponent = AudioComponentFindNext(NULL, &audioComponentDescription);
err = AudioComponentInstanceNew(audioComponent, &_audioUnit);
UInt32 size;
size = sizeof(AudioStreamBasicDescription);
err = AudioUnitGetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
1,
&_soundFileDataFormat,
&size);
_soundFileDataFormat.mSampleRate = 44100.00;
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Input,
kInputBus,
&_soundFileDataFormat,
size);
AudioUnitSetProperty(_audioUnit,
kAudioUnitProperty_StreamFormat,
kAudioUnitScope_Output,
kOutputBus,
&_soundFileDataFormat,
size);
AURenderCallbackStruct renderCallbackStruct;
renderCallbackStruct.inputProc = MyRecorderCallback;
renderCallbackStruct.inputProcRefCon = self;
UInt32 one = 1;
UInt32 zero = 0;
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Input,
kInputBus,
&one,
sizeof(one));
err = AudioUnitSetProperty(_audioUnit,
kAudioOutputUnitProperty_EnableIO,
kAudioUnitScope_Output,
kOutputBus,
&zero,
sizeof(zero));
err = AudioUnitSetProperty (_audioUnit,
kAudioOutputUnitProperty_SetInputCallback,
kAudioUnitScope_Global,
0,
&renderCallbackStruct,
sizeof(AURenderCallbackStruct));
err = AudioUnitInitialize(_audioUnit);
Then in I setup a file to write in:
- (void) openFile
OSStatus err;
err = ExtAudioFileCreateWithURL((CFURLRef) _soundFileUrl,
kAudioFileCAFType,
&_soundFileDataFormat,
NULL,
kAudioFileFlags_EraseFile,
&_extAudioFileRef);
err = ExtAudioFileSetProperty(_extAudioFileRef,
kExtAudioFileProperty_ClientDataFormat,
sizeof(AudioStreamBasicDescription),
&_soundFileDataFormat);
err = ExtAudioFileWriteAsync(_extAudioFileRef,
0,
NULL);
All this things works well (I check by printing err in the log which I removed here for clarity).
And then in the callback for recording I do the following:
static OSStatus MyRecorderCallback(void *inRefCon,
AudioUnitRenderActionFlags* inActionFlags,
const AudioTimeStamp* inTimeStamp,
UInt32 inBusNumber,
UInt32 inNumFrames,
AudioBufferList* ioData)
OSStatus err= noErr;
AudioUnitRecorder* auRec = (AudioUnitRecorder*) inRefCon;
[auRec allocateAudioBufferList:1 size:inNumFrames*4];
err = AudioUnitRender(auRec.audioUnit,
inActionFlags,
inTimeStamp,
inBusNumber,
inNumFrames,
auRec.audioBufferList);
err = ExtAudioFileWriteAsync(auRec.extAudioFileRef,
inNumFrames,
auRec.audioBufferList);
return err;
(Then I close the file after recording at the same time I close the AudioUnit)
Now the strange thing is that all this works perfectly well in the simulator: I can record and play at the same time but on the device, the callback for recording is not ran (I check by trying to print something in the log in the callback function.) which men no writing in the file and an empty file in the end.
Any one has any idea of what could be causing this?
Thanks
Alexandre

Just in case some one might need it, I solved my problem:
I simply needed to initialize the AudioSession before playing/recording. I did so with the following code:
OSStatus err;
AudioSessionInitialize(NULL, NULL, MyInterruptionListener, self);
UInt32 sessionCategory = kAudioSessionCategory_PlayAndRecord;
err = AudioSessionSetProperty (kAudioSessionProperty_AudioCategory,
sizeof (sessionCategory),
&sessionCategory);
AudioSessionSetActive(TRUE);

Nano 6 gen will not play at the same time it is charging

My Nano 6 gen will not charge and play at the same time via USB on a windows computer. It has in the past, but now it will only charge and be recognized to the computer as an external drive. If I "eject" it, it stops charging. Not sure what to do.

Is it set to Manually manage music, or Enable disk use, on the iPod's Summary tab in iTunes? If so, it will not operate as an iPod (when connected to your computer's USB port) while it is recognized by iTunes (and Windows). It is acting as a storage "disk."
However, if you eject the iPod (using the button next to the iPod in iTunes) and leave it connected to the USB port, if should only receive power from the port. It should then operate as an iPod. It should also continue to charge, if it is not fully charged already.
In the past, you probably had it set to automatically sync, instead of Manually manage music, with disk use NOT enabled. Then, the iPod would operate as an iPod when connected, except during the time when iTunes syncs the iPod.

How do i sync the tempos for two different tracks playing at the same time?

i am new to audition so i apologize if there is an easy answer to this question, but...
i upload two different two different songs and i want to get them to play at the same time and sound halfway decent. how do i get the tempos to match?

http://www.adobeforums.com/webx/.2cccd873/0

I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

Obvious question, but have you got 'Find My iPhone' set on both devices? Settings>iCloud>Find My iPhone.

How do I set up two iPods (nano and touch) on the same computer?

I have to configure two Ipod (touch and nano) on the same computer but with two different music libraries. It can be done?How?
Thank

See:
How to use multiple iPods, iPads, or iPhones with one computer
and this previous discussion:
What is the best way to manage multiple...: Apple Support Communities

Im worried about the battery percentage while play a game on my iphone 4s.so that,i decided to play a games and charging at the same time.is it problem on my battery ? im to worried.please give a conclusion.

Im too worried about the battery percentage while playing a game on my iphone 4s.so that,i decided to play a games and charging at the same time.im too worried for my battery problem on the future.please give a conclusion.

It is perfectly fine to use the phone while charging it.

Streaming wifi and bluetooth at the same time is it possible in air play from iPod

Streaming bluetooth and wifi at the same. Is it possible?

You are not able to send the music to two different streams, you can use the bluetooth and wireless at the same time but for different tasks.
The best way I have seen for what you are attempting, is to buy a wired splitter and two bluetooth transmitters, and have each transmitter broadcast bluetooth sound to the two different locations.
I have not found any other way except when using itunes on a desktop computer which allows the selection of multiple output destinations.

I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

Two clips overlayed and playing at the same time..

Similar Messages

Maybe you are looking for