Two Code Split View

In Dreamweaver there is a possibility to view code with design in parallel, view desing or code only, or switch to split code view, which allows user to see the same document and move to it's different parts. However, as far as I understood there is no possibility to view two different source codes in the same time. What if I am building the page and need to get some ideas or some parts of the codefrom another one? I believe that would be very nice if there was a chance to see one code and edit another one simultaneously.
Hope I'm mistaken and DW CS5 allows that.

You mean like this?
In CS4 that's under the Window menu which give you the option to cascade or tile your documents.
Martin

Similar Messages

Cs4 dreamweaver suddenly crashes when selecting code/split view

i have looked around and found this issue in older posts from 2008 but have not found a resolution. i've had dw cs4 for mac for a several months and all of a sudden it started crashing when i select code/split view.
i have:
deleted prefs
deleted config folder and .dat file
started up in safe mode and new user mode
no other issues with any other adobe apps or crashing in general
have plenty of memory
got rid of extensions
i feel like it is a corrupted file that is doing it unfortunately i dont have my original disk on hand to reinstall right now (purchased cd instead of download). UGH!
i'm running: snow leopard / 10.6.4 / 2x2.66 ghz dual core intel xeon / 7gb memory
here are the first few lines of the same error code:
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
Crashed Thread: 19
Thread 0: Dispatch queue: com.apple.main-thread
0   libSystem.B.dylib             0x940d2099 szone_free_definite_size + 654
1   libSystem.B.dylib             0x940d1ba8 free + 244
2   com.apple.carbonbundletemplate 0x1e85431d js_FinalizeStringRT + 31
3   com.apple.carbonbundletemplate 0x1e835694 js_GC + 2156
4   com.apple.carbonbundletemplate 0x1e8359bc js_ForceGC + 67
5   com.apple.carbonbundletemplate 0x1e8592b1 js_DestroyContext + 150
6   com.apple.carbonbundletemplate 0x1e80bdc8 JS_DestroyContext + 25
7   com.apple.carbonbundletemplate 0x1e801237 JS_LangParser::DestroyJSEngine() + 43

Have you done a complete uninstall, clean up, and then reinstall? - Sounds like that's the only thing you haven't tried, so I'd try that next. Yeah, I know... a real pain. The sort of thing we on the PC side have to deal with far more often unfortunetly ;-/
Lawrence Carmer - *Adobe Community Professional*
http://www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in PHP and ColdFusion
Stay updated - http://blog.cartweaver.com

Dreamweaver SPLIT CODE/DESIGN VIEW?

Hello.
I'm running Dreamweaver CS3. I have dual 22" monitors and I
want to be able to see the design view and code view of a single
page at the same time vertically not horizontally. Right now when I
hit the SPLIT the windows are on top of each other. Is there a way
to make them beside each other or apart or something?
I also tried running two instances of Dreamweaver but that
didn't work either. This really sucks because I want to be able to
see my full design while I edit the code/css.
Thanks

WebMan4 wrote:
> Is there any other way around this?
Not that I know of.
More people are using large monitors and dual monitor setups
these days,
so vertical split view is a feature that is likely to be
increasingly
requested. Why not submit a feature request to the
development team?
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Is it possible to have the same Split Code/Design view in CS5 that I had in CS3?

I am not a hard coder. However, like HTML, I could easily edit PHP in CS3 Dreamweaver's Split Code/Design view. It was more designer friendly, intuitive, etc. I could see/edit/move tables, placed graphics, text, etc. CS5 doen't allow me to see my PHP pages this way. Can this be fixed to have the same Split Code/Design view? I would appreciate any assistance you can offer.

To restore the cs3 style horizontal split of code and design views, go to the 'view' drop down menu and untick 'split vertically'.
Richard

DreamweaverCS3 template(two column liquid) views fine in firefox but in IExplorer I don't get the design only code? How do I fix this?

Dreamweaver CS3 template two column liquid views fine in firefox but in Iexplorer I don't get the design only code? How do I fix this?

random guess- what file extension have you saved the file with.
second random guess- there may be an unclosed html comment
third- what do you mean by "I don't get the design only code"
Do you mean the browser shows the code, or the browser shows nothing, or ???
for a better reply, please provide a link to the uploaded page please.

DW code view custom highlight color from design view (split view)

I would like to change the "Code view" highlight color from it's default to something more contrasty ... so while using "Split view" - when I select an element in "Design View" the corresponding code in "Code view" would be easier to find ...
Anyone knows how to customize this setting wit DW CS5??
Thanks!

I would like to change the "Code view" highlight color from it's default to something more contrasty ... so while using "Split view" - when I select an element in "Design View" the corresponding code in "Code view" would be easier to find ...
Anyone knows how to customize this setting wit DW CS5??
DW Code View uses the Selection colors defined for your Operating System.
If you don't know how to change that, which OS and version are you using?
HTH,
Randy

Split view pausing when updating code

HI, I love split view, can live without it, but in the latest version 5 and up, it seems when i change the code in code view side, the wysiwyg side pauses for a few seconds to update what i've changed, almost flashes asif reloading, maybe it is, but it seemed to do this more seemlessly, I could go back and forth and updates were instant. I am not in live view, that takes even longer when changes to the code view are done.
Just curious is there are ways to speed this up, or anything anyone has run into that causes the split view window to pause when changes are made.
It only happens, in split view, and i update something in code view, even just text <p> and when i click back to the wyysiwyg side, it pauses for a few seconds before reflecting the change.

Yes, same scenario, when I click back to design view, it usually updates quickly, but now it takes 3-5 seconds before it refreshes. It's noticeable, and hard to work with when I am updating alot of content peices,
I've tried other sites thinking maybe it has something to do with related files or something, but same thing, Its noticeable, but I can't seem to figure out when it started or why. Been using split view since it was available, always quite fast... I don;t have any data connections, or testing servers setup that could cause lag. I hope its a simple toggle of something I inadvertently toggled?

Dreamweaver 8.0.2 -- code view is totally screwed, so is design view. Split view works fine.

I just started having an extremely annoying issue in DW8-XP.
The code view is completely messed up. I can switch to code view,
but nothing is there. Just a ghost of the split view I was just in.
If I open a new file (like css file) in code view, I see a ghost of
the last view. Since css files don't have a split or design view,
I'm screwed. Cannot firgure out how to delete the config file. Do
you think this would help? Would it erase any settings I have
currently set?
I tried switching to a default layout, restarting and all. No
luck. Little help? :D

Restart the system.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"purefusion" <[email protected]> wrote in
message
news:eqntd2$chq$[email protected]..
>I just started having an extremely annoying issue in
DW8-XP. The code view
>is
> completely messed up. I can switch to code view, but
nothing is there.
> Just a
> ghost of the split view I was just in. If I open a new
file (like css
> file) in
> code view, I see a ghost of the last view. Since css
files don't have a
> split
> or design view, I'm screwed. Cannot firgure out how to
delete the config
> file.
> Do you think this would help? Would it erase any
settings I have currently
> set?
>
> I tried switching to a default layout, restarting and
all. No luck. Little
> help? :D
>

Constrain Split View

Hi,
I have created a simple application that uses a "NSSplitView". Everything works perfectly, but I would like to be able to make sure that none of the two sides of the split view can have a width of less than 50 px.
I tried this code:
THE "MAVController.h" FILE:
========================
#import <Cocoa/Cocoa.h>
@interface MAVController : NSObject {
IBOutlet NSSplitView *splitView;
- (void)awakeFromNib;
@end
THE "MAVController.m" FILE:
========================
#import "MAVController.h"
@implementation MAVController
- (void)awakeFromNib
CGFloat minCoord = 50.0;
[splitView constrainMinCoordinate:minCoord ofSubviewAt:0];
@end
I get the following error:
warning: 'NSSplitView' may not respond to '-constrainMinCoordinate:ofSubviewAt:'
(Messages without a matching method signature will be assumed to return 'id' and accept '...' as arguments.)
How can I constrain the size of the two part of my split view?
Thank you very much,
franky26

The splitView:constrainMinCoordinate:ofSubviewAt: method is called by a NSSplitView on its delegate.
The simplest way is to declare MAVController as the delegate of the SplitView. For example in the awakeFromNib method splitView.delegate = self;Or in Interface Builder.
Now MAVController is the NSSplitView delegate, you have to define the proper method in it. For example, if you want that each of the 2 parts of the NSSplitView have a min size of 50.0- (CGFloat)splitView:(NSSplitView *)sender constrainMinCoordinate:(CGFloat)proposedMin ofSubviewAt:(NSInteger)offset{
CGFloat minCoord = 50.0;
return (minCoord<proposedMin)?proposedMin:minCoord;

Split View: Should be easy but...

Ok. So I have a Split View. It looks a bit like this:
Split View
- Tab View
- Scroll View (Text View)
A vertical Split view displaying two things: the Tab View on the left, the Text View on the Right.
I want to change this.
Is there any way of switching the sides? Making the Tab View go to the right and the Text View to the left? and once my app is compiled, is there any property/method/code that would allow the user to change this at runtime?
Thank you a lot!

To switch the sides in Interface Builder, the easiest thing to do is unembed the views from the split view, move the views, and embed them in a split view.
1. Select the two views in Interface Builder.
2. Choose Layout > Unembed Objects.
3. Move the views.
4. Select the two views a second time.
5. Choose Layout > Embed Objects In > Split View.

Flash CS6 split view window/focus issues.

I'm using Flash CS6 editing multiple AS3 files and the file tab selection behavior is frustrating and I was not having these issues in Flash CS5.5. When viewing two code windows in a split plane, clicking from one window to the next does not automatically focus/activate the code tab.
Steps to reproduce:
1) Open two AS3 files and arrange them into a 2 window split view.
2) Select the code file tab on the right.
3) Within the right code file, copy a line of code.
4) Click the mouse within the first code file on the left and paste your code line.
5) Note that your code pastes into the right file.
6) Note that the left code file does not receive focus when the cursor is in the window.
OS: Win 7

Ya, I havent used Flash Builder yet only because FP is what I'm used to. However, just imported my project into FB 4.6 and it's alot better so thanks for the tip.
So I tried undocking, and the bug remains if you copy a line from one 'undocked' tab, into a docked tab. However if both code windows are undocked, the copy/paste and window focusing works fine, but in my case with ~20 class files, it would be a nightmare.
The workaround is either edit the project in CS5.5, then open and re-save it in CS6, or in CS6 click the file tab you want to edit, then click within the file, then paste, every time you are copying a line from one file to another.

Can you set DW to always show split view?

This is not a major problem but an annoying thing and I can't seem to find. I almost always work in split view - never design view. Yet DW seems to default to design view. Even if I have previously edited a page in split or even code view, the next time I open that file (if I have closed and opened DW in the meantime) it opens in design view.
I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Anyone know how to change this?
Thanks!
Ellie

>>I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Yes, the same problem started in CS4-Mac for me.
Just for kicks, I opened my custom workspace a moment ago. I then opened a document to split view, then resaved that setup as a new custom workspace.
Upon reopening Dreamweaver the next time, it remembered my split view setting. However, the time after that, I was back in Design view.
This seems to be pretty buggy.
Hopefully someone will post a solution.
...pt

Why can't I type more than one space in a split-view in DW

Say, I am an a split view in a Dreamweaver CS5 and I'm typing in the right view (whatever it's called), but for some reason I can't type more than a single space there. Can I disable that?

Thank you, Curtis. One thing that needs to be added to your post is that one has to restart DW for this setting to take effect. (Well, that may be a bug.) But it still doesn't fix the issue (read below.)
As for the other two comments, I hate when people try to pigeonhole something without even trying to understand someone's situation. Did I say that I would be using it for a layout?
Here's why I need it. Say, I'm working on typing a paragraph of text. My preference is to have DW in a split-view, with the HTML being displayed on the left and the "result" view on the right. That view on the right allows me to type in text directly into the page w/o worrying about HTML semantics -- very handy feature, except one little detail. Say, I have the following snippet of text, "This is some sample text" and I want to edit out the word "some" with the phrase "very important". So I highlight the word "some" and begin typing. Everything goes well when I finish typing "very", but as soon as I put a space to begin typing the word "important", something in DW makes the resulting phrase to look like this: "This is very importantsample text" Notice that the space after "important" was removed. You see, I'm not used to adding spaces after each of my edits (and that is how 99% of word processors work in the world) so my documents started to miss spaces and it took me awhile to figure out why. I was truly hoping that Curtis' suggestion would fix the issue, but even though I can add more than a single space, DW still removes spaces for me automatically, like I just explained above.

Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first image

When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie

Remote images not showing up in design/split view

Just recently, whenever i updated the image location from the
local site to the remote site path, the images don't get loaded
into dreamweaver how it used to.
i'm not sure if i unchecked something. the paths are correct
and they show up when i preview in browser so i know it's not that.
if anyone can help with this it will be great. thanks.

Do you have spaces in your image file/pathnames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"zgarcia" <[email protected]> wrote in
message
news:e286rc$adb$[email protected]..
> DW 8.01
>
> it's not the put action.
>
> what i normally do is compose the email on the local
site so i have the
> images
> showing, add the links etc...
> then i upload the images onto my remote server.
> after i do that, i go into the source code and do a
find/replace on the
> image
> directory. (highlight "images" and replace it with the
> "
http://www.example.com/campaign/email")
>
> now, after i do a replace all, the images would reflect
whatever is in the
> remote directory (
http://etc...) and will actually display
in the
> design/split
> view instead of seeing broken image icons as it's
currently doing.
>
> the remote site locations are correct.
>
> let me know if that helps, thanks.
>

Two Code Split View

Similar Messages

Maybe you are looking for