Two computers, external drive mounting on wrong one?

Weirdest thing: I have 2 computers on my desk:
Mac Pro and older iMac.
Two WD external drives, one connected via firewire to the macPro, one connected via firewire to the iMac.
The drives are mounting on the wrong computers! (Yes I checked my cables). How is this happening?
ANY help would be appreciated!!!

or you could continue to network with the cable for security reasons.
you just need to boot the computers disconnected from each other, mount their respective FW devices and then connect the cable between them, and youll be fine.
im internetting with you now on my pro which is FW400ed to another computer that is on the connection. The pro has an external FW drive. One in 20 times, it mounts on the other computer, in which case, i disconnect, mount, reconnect, no prob.

Similar Messages

How do I set Time Machine to alternate between two attached external drives (so that if one fails I will have a separate backup to use)?

Hi Everyone.
Thanks in advance for your help.
Right off the bat let me say I am using Mavericks 10.9.1 on a 2011 Macbook Pro and using all Lacie external hard drives.
I am trying to get Time Machine to alternate between two attached external hard drives, trying to be safe in case one of the backup drives itself fails.
I have both drives set in Time Machine.
From what I gather Time Machine should by default alternate between drives when backing up (I would assume it does one big initial backup on each then subsequent backups are just changes).
But this is not how it seems to be working and I cannot find a straight answer despite much Googling and Foruming
Unfortunately it seems to only be backing up to "External Hard Drive 1".
There have been 4 backups since I set it up, all on "External Hard Drive 1", even though "External Hard Drive 2" is also attached and set in Time Machine.
I manually clicked "Back Up Now" and it started to work on "External Hard Drive 2" (like I want it to) for a minute but it appears to have stopped and gone back to backing up to "External Hard Drive 1".
Am I missing something? Does Time Machine only move on to another disk when the first one runs out of space? Do I have to turn one off in order to force it to back up to the other drive (that would be less convenient of course)?
I am hoping that I am missing something and that it will just alternate between the two. Otherwise it is not the most comforting and thorough backup system as I had hoped when I purchased the additional external hard drive.
I have a 1TB drive and a 500gig partition on another drive, both dedicated to backups (my Macbook HD is 475gig). It will take awhile for each to fill up and who knows what could happen during that time. Having Time Machine alternate between hard drives would be a nice small bit of security if the worst happened.
I realize that there are tons of other options for backing up but I just want to use Time Machine if I can.
Again thank you for your help!

You cannot use Time Machine in that way. I'm not sure where you heard that Time Machine alternates between drives automatically. What you can do is create a mirrored RAID array for the backup. This automatically duplicates whatever is on one drive onto the other drive.
Both drives must be the same size, and prefereably, exactly the same make and model. RAIDs can be configured using OS X's Disk Utility.
RAID Basics
For basic definitions and discussion of what a RAID is and the different types of RAIDs see RAIDs. Additional discussions plus advantages and disadvantages of RAIDs and different RAID arrays see:
RAID Tutorial;
RAID Array and Server:
Hardware and Service Comparison.
Hardware or Software RAID?
RAID Hardware Vs RAID Software - What is your best option?
RAID is a method of combining multiple disk drives into a single entity in order to improve the overall performance and reliability of your system. The different options for combining the disks are referred to as RAID levels. There are several different levels of RAID available depending on the needs of your system. One of the options available to you is whether you should use a Hardware RAID solution or a Software RAID solution.
RAID Hardware is always a disk controller to which you can cable up the disk drives. RAID Software is a set of kernel modules coupled together with management utilities that implement RAID in Software and require no additional hardware.
Pros and cons
Software RAID is more flexible than Hardware RAID. Software RAID is also considerably less expensive. On the other hand, a Software RAID system requires more CPU cycles and power to run well than a comparable Hardware RAID System. Also, because Software RAID operates on a partition by partition basis where a number of individual disk partitions are grouped together as opposed to Hardware RAID systems which generally group together entire disk drives, Software RAID tends be slightly more complicated to run. This is because it has more available configurations and options. An added benefit to the slightly more expensive Hardware RAID solution is that many Hardware RAID systems incorporate features that are specialized for optimizing the performance of your system.
For more detailed information on the differences between Software RAID and Hardware RAID you may want to read: Hardware RAID vs. Software RAID: Which Implementation is Best for my Application?

Buying External Drive that Only Needs One USB Port?

The optical drive on my 2007 MacBook Pro has been dead for about 6 months. I need to get an external one so I can install some software, but I am having trouble finding one that only uses one USB port, as there is only one on each side of my notebook. I went to Best Buy today, and the only one they had that is compatible with a Mac needs two side-by-side USB ports.
Does anyone know of any good Mac compatible external drives that only require one USB port? I am interested in purchasing one by LaCie, but their site does not specify how many USBs it requires.
Any advice you can give me will be greatly appreciated!

Welcome to Apple Discussions!
You might want to consider a FireWire powered optical drive:
http://eshop.macsales.com/shop/firewire/optical-drives/
A FireWire port will deliver more power, so you would only need to use one FW port. The people at OWC are very Mac knowledgeable and could help you to pick one out. Your 2007 MBP should have both FW400 and FW800, so you could use either port.
Good luck!

Getting files from old external drive to a new one

I have a dying Acom ac powered 80gig external drive on my eMac and a powerbook that is running out of drive space.
The Acom has one USB and two firewire outputs, one firewire is hooked up to the eMac . The Acom is all itunes music (none from the Apple Store) .
I had an ex-friend set it up so I don't know squat about using external drives . I think I'll get the LaCie Mobile firewire . From what I've read it seems the best . Any other suggestions are welcome .
Is there a good tutorial somewhere on how to do this ? I would like to transfer all the music from the Acom to the new drive and be able to use it like I did the old one AND use it with my powerbook to do the same thing .
Will there be a problem with library ? In iTunes (4.7) I have "Create file names with track number " checked but I don't have "Copy files to iTunes music folder when adding to library" I don't really know what this does but it sounded like it took up space so I haven't ever checked it .
as mentioned the eMac is iTunes 4.7 using Panther and the powerbook is iTunes 6.0.2 using Tiger .
G4powerbook tiger- G4eMac panther Mac OS X (10.3.9)

What you like to do can be done, but not using different main versions of iTunes.
The reason for this is, that the 'iTunes Library' file has different structures with different main versions and is not downwards compatible.
Unless you have a reason not to upgrade iTunes on the eMac, my advice would be to upgrade.
If you purcase music at the iTMS, using iTunes 6, you won't be able to play them on previous iTunes versions.
If you have MIDI files, don't upgrade to the latest iTunes 6.0.4, unless you own QuickTime Pro.
iTunes 6.0.3 and 6.0.4 are having troubles with them (iTunes: MIDI files cannot be converted in iTunes 6.0.3 and 6.0.4).
I have an G4 iMac running iTunes 6.0.4. and an G3 iMac DV running itunes 6.0.2.
My music is stored on an external drive and it is no problem at all to use it on both computers.
There are a few requirements however (more about that later)
My advice would be to take the next steps.
• Purchase the mobile drive and transfer the music to it, using the instructions in the 'Moving your iTunes Music folder' article.
You will still have a backup on your Acom (as long as it still is running) in case something might go wrong.
• Upgrade iTunes on the eMac
• Copy the 'iTunes Library' file from eMac to the new mobile drive, attach the drive to the Powerbook and copy the 'iTunes library' file from mobile drive to Powerbook. Read "What are the iTunes library files?" to find the exact location of the file.
• Run iTunes on the Powerbook. you should see the entire library as you saw it on your eMac.
A few things to consider and take int account:
Decide which computer to use to add and import music. This will make things a lot easier.
You can of course add music on both computers, but you have to swap the 'iTunes Library' over and over to keep the libraries on both computers synchronized.
Always attach the mobile drive to the computer, before running iTunes. If you fail to do so, iTunes will reset the 'iTunes Music folder location' to the default location on the internal drive on the computer. Unless you 'point' iTunes to the location on the mobile again, songs you add and import will then be stored on the internal disk.
Let know if you have further questions.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

Time Machine Backup on External Drive Stops working after one week

Hello,
I'm having a problem with the Time machine backup on an external LaCie drive. After e few days, it suddenly locks up, not performing any backup unless I force-restart my computer and switch off the drive.
*My setup*:
- iMac Alu 24 with MacOS X 10.5.1 and 3Gb RAM
- LaCie external drive 320 Gb - design by Porsche, connected to the FW 400 port of the iMac --> this is the one used for the bakcups, it is left powered on at any time (never switched off)
- 2 other LaCie external drives 160 Gb - design by Porsche, connected to the FW 400 port of the iMac --> they are generally switched off
TimeMachine is setup to its default scenario, backing up automatically on the external 320 Gb.
*Daily usage* :
- the iMac is set to boot automatically at 6:45
- I usually switch it off manualy at the end of the day
- Screen Saver is set to launch after 5 minutes
- sleep time for computer is set to 1:30 hour
- display sleep 15 min
- hard disk are set to sleep whenever possible
First symptom : the computer never goes to sleep
Second symptom : I had the following problem already twice since I installed Leopard, once with the original install and today with the updated 10.5.1 version:
- automatic backups went fine during the whole day : 7:45 8:45 9:45...
- then an automatic backup starts but never finishes
*Console log extract* :
Nov 18 12:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backup requested by automatic scheduler
Nov 18 12:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Starting standard backup
Nov 18 12:45:23 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backing up to: /Volumes/Aristotle/Backups.backupdb
Nov 18 12:45:23 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: No pre-backup thinning needed: 504.7 MB requested (including padding), 165.05 GB available
Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Copied 919 files (11.4 MB) from volume Machiavel.
Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Starting post-backup thinning
Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: No post-back up thinning needed: no expired backups exist
Nov 18 12:45:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[602]: Backup completed successfully.
Nov 18 12:58:18 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 4) timed out after 100122 ms
Nov 18 13:05:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100119 ms
Nov 18 13:10:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100123 ms
Nov 18 13:15:05 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
Nov 18 13:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[655]: Backup requested by automatic scheduler
Nov 18 13:45:17 rjosse-iMac-Intel /System/Library/CoreServices/backupd[655]: Starting standard backup
Nov 18 13:46:58 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 1 -> 4) timed out after 100122 ms
Nov 18 13:53:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100127 ms
Nov 18 13:58:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100122 ms
Nov 18 14:03:38 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
Nov 18 14:09:52 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 1 -> 4) timed out after 100123 ms
Nov 18 14:16:33 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 4 -> 3) timed out after 100123 ms
Nov 18 14:21:33 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 3 -> 2) timed out after 100121 ms
Nov 18 14:25:10 rjosse-iMac-Intel kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0x566e400, 2 -> 1) timed out after 100123 ms
Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: Snapz Pro X [117]:30211 not responding.
Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: loginwindow [38]:16159 not responding.
Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: mds [37]:14595 not responding.
Nov 18 14:40:23 rjosse-iMac-Intel diskarbitrationd[47]: fseventsd [43]:13059 not responding.
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle' (fd=8) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexGroups' (fd=14) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexIds' (fd=16) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexHead' (fd=17) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexPostings' (fd=18) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexPositions' (fd=19) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexDirectory' (fd=20) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/live.0.indexGroups' (fd=21) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/live.0.indexIds' (fd=25) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/journalAttr.183' (fd=26) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/Backups.backupdb' (fd=27) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/329E6119-D3C1-41DF-B404-4A2 C2B8DA6C6/indexState' (fd=28) left open on device 234881029
Nov 18 14:40:27 rjosse-iMac-Intel mds[37]: (Error) LSOF: File '/Volumes/Aristotle/.Spotlight-V100/Store-V1/Stores/EE68148A-EF55-4E6D-B3C2-2EC 10582235E/0.indexCompactDirectory' (fd=29) left open on device 234881029
Nov 18 14:41:06 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[61]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christelle Geiger's Public Folder) returned -14135
Nov 18 14:41:06 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[61]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Raphael Josse's Public Folder) returned -14135
Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: [460] http://abonnes.lemonde.fr/web/sequence/0,2-3208,1-0,0.html line 460: TypeError: Null value
Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/icons-mac/ from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379025621&alternatead_url=http%3A%2F%2Fads.interfacelift.com%2Flocal%2Fvc_728x90.html&prev_fmts=728 x90_as%2C728x15_0ads_al_s&format=728x90_as&output=html&correlator=1195379025621& channel=5424080503&url=http%3A%2F%2Finterfacelift.com%2Ficons-mac%2F&color_bg=e4 e4e4&color_text=000000&color_link=0000FF&color_url=0000CC&color_border=e4e4e4&ad _type=text_image&cc=99&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hid=572 641411&ga_fc=true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_tz=60& u_his=1&u_java=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
Nov 18 14:42:09: --- last message repeated 1 time ---
Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/wallpaper/index.php?sort=date from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379027911&alternatead_url=http%3A%2F%2Fads.interfacelift.com%2Flocal%2Fvc_728x90.html&prev_fmts=728 x90_as%2C728x90_as%2C728x15_0ads_al_s&format=728x90_as&output=html&correlator=11 95379027911&channel=5424080503&url=http%3A%2F%2Finterfacelift.com%2Fwallpaper%2F index.php%3Fsort%3Ddate&color_bg=e4e4e4&color_text=000000&color_link=0000FF&colo r_url=0000CC&color_border=e4e4e4&ad_type=text_image&ref=http%3A%2F%2Finterfaceli ft.com%2Ficons-mac%2F&cc=99&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hi d=881176033&ga_fc=true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_t z=60&u_his=2&u_java=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
Nov 18 14:42:09: --- last message repeated 1 time ---
Nov 18 14:42:04 rjosse-iMac-Intel [0x0-0x44044].com.apple.Safari[460]: Unsafe JavaScript attempt to access frame with URL http://interfacelift.com/wallpaper/index.php?sort=date from frame with URL http://pagead2.googlesyndication.com/pagead/ads?client=ca-pub-3902458398606385&d t=1195379030801&alternatead_url=http%3A%2F%2Finterfacelift.com%2Finc%2Fads%2Frmxdirect_120x600.html&forma t=120x600_as&output=html&correlator=1195379030801&channel=7199947456&url=http%3A %2F%2Finterfacelift.com%2Fwallpaper%2Findex.php%3Fsort%3Ddate&color_bg=E4E4E4&co lor_text=000000&color_link=0000DD&color_url=EE0000&color_border=E4E4E4&ad_type=t ext_image&ga_vid=1910858155.1190116221&ga_sid=1195379024&ga_hid=424116187&ga_fc= true&flash=9&u_h=1200&u_w=1920&u_ah=1127&u_aw=1920&u_cd=24&u_tz=60&u_his=2&u_jav a=true&u_nplug=14&unmime=168. Domains, protocols and ports must match.
Nov 18 14:42:23: --- last message repeated 1 time ---
Nov 18 14:42:11 rjosse-iMac-Intel [0x0-0x1e01e].com.microsoft.DatabaseDaemon[144]: monitor: taskforpid failed (os/kern) failure
Nov 18 14:42:23 rjosse-iMac-Intel com.apple.launchd[79] (0x10cd80.Locum[722]): Exited: Terminated
Nov 18 14:42:28 rjosse-iMac-Intel Disk Utility[723]: ********
Nov 18 14:42:28 rjosse-iMac-Intel Disk Utility[723]: Disk Utility started.
Disk Utility is then locked up, and I force the computer to shut down.
*Console log extract after forced restart* :
Nov 18 14:45:38 localhost kernel[0]: npvhash=4095
Nov 18 14:45:34 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Nov 18 14:45:34 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/chum.plist
Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 18 14:45:37 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/pilotfish.plist
Nov 18 14:45:37 localhost com.apple.launchd[1] (com.apple.distccdConfigd): Unknown key: SHAuthorizationRight
Nov 18 14:45:37 localhost com.apple.launchd[1] (org.cups.cups-lpd): Unknown key: SHAuthorizationRight
Nov 18 14:45:37 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 18 14:45:37 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 18 14:45:38 localhost DirectoryService[11]: Launched version 5.0 (v514)
Nov 18 14:45:39 localhost kernel[0]: hi mem tramps at 0xffe00000
Nov 18 14:45:38 localhost DirectoryService[11]: WARNING - dsTouch: file was asked to be opened </Library/Preferences/DirectoryService/.DSIsRunning>: (File exists)
Nov 18 14:45:39 localhost kernel[0]: PAE enabled
Nov 18 14:45:39 localhost kextd[10]: 406 cached, 0 uncached personalities to catalog
Nov 18 14:45:39 localhost kernel[0]: 64 bit mode enabled
Nov 18 14:45:39 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
Nov 18 14:45:39 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 18 14:45:39 localhost kernel[0]: vmpagebootstrap: 770909 free pages and 15523 wired pages
Nov 18 14:45:39 localhost kernel[0]: migtable_maxdispl = 79
Nov 18 14:45:39 localhost kernel[0]: 101 prelinked modules
Nov 18 14:45:40 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Nov 18 14:45:40 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 18 14:45:40 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 18 14:45:40 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 18 14:45:40 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 18 14:45:40 localhost kernel[0]: calling mpopolicyinit for mb
Nov 18 14:45:40 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 18 14:45:40 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 18 14:45:40 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 18 14:45:40 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 18 14:45:39 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[17]: starting
Nov 18 14:45:40 localhost kernel[0]: MAC Framework successfully initialized
Nov 18 14:45:40 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
Nov 18 14:45:40 localhost kernel[0]: devfsmakenode: not ready for devices!
Nov 18 14:45:40 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Nov 18 14:45:40 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 18 14:45:40 localhost kernel[0]: mbinit: done
Nov 18 14:45:40 localhost kernel[0]: Security auditing service present
Nov 18 14:45:40 localhost kernel[0]: BSM auditing present
Nov 18 14:45:40 localhost kernel[0]: rooting via boot-uuid from /chosen: 3BE69CB3-F529-3692-9254-BF5682D3F1EB
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0 /IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDrive r/WDC WD3200AAJS-40RYA0 Media/IOGUIDPartitionScheme/AppleHFS_Untitled1@2
Nov 18 14:45:40 rjosse-iMac-Intel configd[14]: setting hostname to "rjosse-iMac-Intel.local"
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: jnl: unknown-dev: replay_journal: from: 18105344 to: 25136640 (joffset 0x8650000)
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 001cb3fffe7fdb1e; max speed s800.
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver::start []
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: USBF: 2.378 CSRHIDTransitionDriver[0x5672e00](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: CSRHIDTransitionDriver... done
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: jnl: unknown-dev: journal replay done.
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: HFS: Removed 2 orphaned unlinked files or directories
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Jettisoning kernel linker.
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Resetting IOCatalogue.
Nov 18 14:45:40 rjosse-iMac-Intel mDNSResponder[17]: SetDomainSecrets: mDNSKeychainGetSecrets failed error 0 CFArrayRef 00000000
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Matching service count = 0
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: Matching service count = 0
Nov 18 14:45:40: --- last message repeated 4 times ---
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: 4.170.25.8.2yukon: Ethernet address 00:1b:63:96:3a:de
Nov 18 14:45:40 rjosse-iMac-Intel kernel[0]: AirPort_Brcm43xx: Ethernet address 00:1c:b3:77:77:d8
Nov 18 14:45:41 rjosse-iMac-Intel fseventsd[41]: event logs in /.fseventsd out of sync with volume. destroying old logs. (52617 17 52672)
Nov 18 14:45:46 rjosse-iMac-Intel kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Nov 18 14:45:46 rjosse-iMac-Intel com.apple.launchd[1] (com.apple.distccdConfigd[44]): Exited with exit code: 255
Nov 18 14:45:46 rjosse-iMac-Intel /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[36]: Login Window Application Started
Nov 18 14:45:46 rjosse-iMac-Intel org.ntp.ntpd[27]: Error : nodename nor servname provided, or not known
Nov 18 14:45:46 rjosse-iMac-Intel configd[14]: AppleTalk startup
Nov 18 14:45:42 rjosse-iMac-Intel bootlog[48]: BOOT_TIME: 1195393524 0
Nov 18 14:45:46 rjosse-iMac-Intel ntpdate[58]: can't find host time.apple.com
Nov 18 14:45:45 rjosse-iMac-Intel blued[49]: Apple Bluetooth daemon started.
Nov 18 14:45:46 rjosse-iMac-Intel rpc.statd[33]: statd.notify - no notifications needed
Nov 18 14:45:47 rjosse-iMac-Intel ntpdate[58]: no servers can be used, exiting
Nov 18 14:45:47 rjosse-iMac-Intel fseventsd[41]: log dir: /.fseventsd getting new uuid: D113BE4C-EACE-44B4-A5C1-32140ED4714A
Nov 18 14:45:47 rjosse-iMac-Intel /usr/sbin/ocspd[66]: starting
Nov 18 14:45:51 rjosse-iMac-Intel kextd[10]: writing kernel link data to /var/run/mach.sym
Nov 18 14:45:52 rjosse-iMac-Intel configd[14]: AppleTalk startup complete
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:03: --- last message repeated 1 time ---
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:03: --- last message repeated 1 time ---
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:03: --- last message repeated 1 time ---
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:03: --- last message repeated 1 time ---
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:03: --- last message repeated 1 time ---
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:03: --- last message repeated 1 time ---
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:03: --- last message repeated 1 time ---
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]: disk0s2: memory allocation error.
Nov 18 14:46:03 rjosse-iMac-Intel kernel[0]:
Nov 18 14:46:06: --- last message repeated 1 time ---
Nov 18 14:46:06 rjosse-iMac-Intel loginwindow[36]: Login Window Started Security Agent
Nov 18 14:46:07 rjosse-iMac-Intel authorizationhost[81]: MechanismInvoke 0x127320 retainCount 2
Nov 18 14:46:07 rjosse-iMac-Intel SecurityAgent[82]: MechanismInvoke 0x12a370 retainCount 1
Nov 18 14:46:07 rjosse-iMac-Intel SecurityAgent[82]: MechanismDestroy 0x12a370 retainCount 1
Nov 18 14:46:07 rjosse-iMac-Intel loginwindow[36]: Login Window - Returned from Security Agent
Nov 18 14:46:07 rjosse-iMac-Intel authorizationhost[81]: MechanismDestroy 0x127320 retainCount 2
Nov 18 14:46:07 rjosse-iMac-Intel loginwindow[36]: USER_PROCESS: 36 console
Nov 18 14:46:07 rjosse-iMac-Intel com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[77]): Exited: Terminated
Nov 18 14:46:07 rjosse-iMac-Intel com.apple.launchctl.Aqua[86]: launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
Nov 18 14:46:08 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[60]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christelle Geiger's Public Folder) returned -14135
Nov 18 14:46:08 rjosse-iMac-Intel /System/Library/CoreServices/coreservicesd[60]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Raphael Josse's Public Folder) returned -14135
Nov 18 14:46:09 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[9 6]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:46:09 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[9 6]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:46:11 rjosse-iMac-Intel /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[98]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:46:11 rjosse-iMac-Intel /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[98]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:46:11 rjosse-iMac-Intel MagicMenuHotKeyDaemon[115]: Started
Nov 18 14:46:11 rjosse-iMac-Intel [0x0-0x11011].com.stuffit.MagicMenu[111]: 2007-11-18 14:46:11.155 MagicMenuHotKeyDaemon[115:10b] Started
Nov 18 14:46:14 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSPostKillRequest(): This call is deprecated and should not be called anymore.
Nov 18 14:46:14 rjosse-iMac-Intel com.apple.launchd[83] ([0x0-0x8008].com.apple.systemuiserver[96]): Exited: Terminated
Nov 18 14:46:14 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 17]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:46:14 rjosse-iMac-Intel /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 17]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:46:15 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:46:15 rjosse-iMac-Intel /Applications/Snapz Pro X/Snapz Pro X.app/Contents/MacOS/Snapz Pro X[113]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 18 14:47:14 rjosse-iMac-Intel kernel[0]: jnl: disk1s3: replay_journal: from: 3197440 to: 5989888 (joffset 0x952000)
Nov 18 14:47:15 rjosse-iMac-Intel kernel[0]: jnl: disk1s3: journal replay done.
Nov 18 14:47:15 rjosse-iMac-Intel fseventsd[41]: event logs in /Volumes/Aristotle/.fseventsd out of sync with volume. destroying old logs. (45648 2 52766)
Nov 18 14:47:15 rjosse-iMac-Intel fseventsd[41]: log dir: /Volumes/Aristotle/.fseventsd getting new uuid: 3DC60C6C-8E59-425A-A831-5C9FE4025DDC
Nov 18 14:48:55 rjosse-iMac-Intel Adium[140]: PGBContactTimeZonePlugin Loaded!
Next backup runs fine after fixing the drive :
Nov 18 14:49:02 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backup requested by user
Nov 18 14:49:02 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Starting standard backup
Nov 18 14:49:03 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backing up to: /Volumes/Aristotle/Backups.backupdb
Nov 18 14:49:04 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Event store UUIDs don't match for volume Machiavel
Nov 18 14:49:04 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
Nov 18 14:49:14 rjosse-iMac-Intel [0x0-0x22022].com.microsoft.Entourage[141]: monitor: taskforpid failed (os/kern) failure
Nov 18 14:49:30 rjosse-iMac-Intel [0x0-0x25025].com.microsoft.entourage.syncservices[150]: monitor: taskforpid failed (os/kern) failure
Nov 18 14:51:12 rjosse-iMac-Intel ntpd[27]: time reset +0.538285 s
Nov 18 14:54:46 rjosse-iMac-Intel /usr/sbin/ocspd[158]: starting
Nov 18 14:58:48 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: No pre-backup thinning needed: 768.4 MB requested (including padding), 165.04 GB available
Nov 18 14:59:25 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Copied 1915 files (231.1 MB) from volume Machiavel.
Nov 18 14:59:26 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: No pre-backup thinning needed: 491.4 MB requested (including padding), 164.80 GB available
Nov 18 14:59:28 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Copied 1282 files (93 bytes) from volume Machiavel.
Nov 18 14:59:30 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Starting post-backup thinning
Nov 18 14:59:33 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-141141: 164.82 GB now available
Nov 18 14:59:34 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-131052: 164.83 GB now available
Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Deleted backup /Volumes/Aristotle/Backups.backupdb/rjosse-iMac-Intel/2007-11-17-124718: 164.85 GB now available
Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Post-back up thinning complete: 3 expired backups removed
Nov 18 14:59:37 rjosse-iMac-Intel /System/Library/CoreServices/backupd[147]: Backup completed successfully.
Nov 18 15:04:11 rjosse-iMac-Intel /Applications/Microsoft Office 2004/Microsoft Entourage[141]: Warning: accessing obsolete X509Anchors.
Raf

When reading my report, I forgot to mention how the external hard drive is formatted :
Hard Drive FW/USB:
Manufacturer: LaCie
Model: 0x0
GUID: 0xD04B78070AD64B
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
Hard Drive FW/USB Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x110
Product Revision Level:
Sub-units:
Hard Drive FW/USB SBP-LUN:
Capacity: 298.09 GB
Removable Media: Yes
BSD Name: disk1
Mac OS 9 Drivers: No
Partition Map Type: APM (Apple Partition Map)
S.M.A.R.T. status: Not Supported
Volumes:
Aristotle:
Capacity: 297.97 GB
Available: 164.85 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /Volumes/Aristotle
Raf

Putting some music files on an external drive, but keeping only one library

I know how to keep two libraries, one on an external drive, and one on my HD...but I'd like to know how to do this:
move some of my music files off of my HD and to my external drive, but maintain the same library (and only one) on my HD. So...when iTunes opens, I see all of the music files in the database, and if I choose a song that physically resides on the HD, it plays it from there, and if I choose one that physically resides on the external drive, it plays it from there. I want to free up space on my HD, but I don't want to have to keep two separate libraries.
Any help is appreciated!

It's easy. After you split the music you can add the music from the different locations to the library and it will play them from wherever they're at. The important thing to do is to go into *System Preferences* in iTunes Advanced and uncheck the *Copy files to iTunes Music folder when adding to library* or iTunes will put duplicates in what ever iTunes Music folder you have iTunes pointed at. This folder is only important when you are adding content that you do want copied to the Library, such as from a CD.
I use this for my iTunes music and movies that is stored three different drives. One is a network drive.

Why doesn't an external drive mount?

I am trying to do backup, and the external drive won't mount. I bought a SATA 250GB drive and attached it to the Powerbook using the USB port. The light shows up on the enclosure but there is no hard drive that appears on the desktop. Also it doesn't show up on Disk Utility.
Is it because this is the wrong sort of drive?
I connected the external drive to the MacBook Air to see if it would mount there and it doesn't show up there either on the desktop.

Is this a bus-powered USB drive? If so, it's demanding too much power, and the USB port can't meet the demand. You'll need to provide it with an AC power supply, if it can be so equipped, or plug it into an AC-powered USB hub instead of directly into the computer.

How do i transfer my IPhoto library from one troublesome external drive to a new one?

My iPhoto library is on older external drive that I no longer trust. How do I transfer it to a new drive? If both are hooked up to iMac can I simply copy from one to the other?

Be sure the new drive is formatted Mac OS extended (journaled) and drag the library intact from the old to the new drive - depress the oprion key and launch iPHoto and use the select library window to select the new location as the default - be sure to fully test the new location before trashing the old one if you plan to
LN

I tried to authorize a new computer with windows 8. Per iTunes Help,there should be an "authorize computer" section on the iTunes store menu. I only have two computers authorized so I know another one is possible. Suggestions?

I tried to authorize a new computer with Windows 8 for my iTunes acct. Per iTunes Help, there is an "authorize computer" prompt in the menu selection on iTunes store website. I can find no such listing. I have two computers linked to my account so I know that adding another one would be ok. Any suggestions?

Press the Alt and S keys and choose Authorize this Computer.
(77483)

External drives mount as read only

I am running OS X 10.6, on a MacPro. Something happened recently to make my external hard drives mount as read only. The only way I've found to be able to fix them is to run Disk Utility every time I start up my computer. Does anyone have an solution to this?
Also every time I run the Disk Utility, at the end of the repairs it says "Updating boot support partitions for the volume as required." I do not know if this is related, but I haven't been able to find anything relevant in relation to my problem with the drives mounting as read only.
Message was edited by: HeatherK

You might give this a try:
Select the drive and Press COMMAND-I to open the Get Info window. At the bottom open the Ownership and Sharing section. Be sure the box labeled "Ignore permissions on this volume" is unchecked. If it is checked then click on the lock icon, authenticate, then uncheck that box. Close the window.
Open the Terminal application in your Utilities folder and at the prompt enter or paste the following:
sudo chown root:admin
Put a space after "admin" then drag the drive's icon into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.
See if this fixes the problem.

How do I autorun something upon an external drive mounting?

I do support for elementary schools and all teachers have a MacBook but limited server space for backup. I would like to set up a large external drive (raid 5 or somesuch) that upon insertion, would run a backup script and then unmount.
Is there a way to make something autorun (regardless of what computer is connected) upon firewire or usb drive insertion?
-Brandon L.

It could be automatically done a few ways from each Mac with I use FW drives on most of my Networks and use Tri-Backup...
http://www.tri-edre.com/english/index.html
It can be setup to just sit in the background until a Drive or Share mounts, Backup whatever, dismount when done.
Ideally it'd be run from the Server with the RAID attached to it.

Add content from two duplicated external drives on itunes

I need to have two external drives with the same content but I need them both work with itunes. Can I do that?

SpilioG wrote:
CHris thank you. You mean "attach" the contents of drive 1 to iTunes library
You have media on an external drive that is not in iTunes?

How do you access a backup of a time capsule that was made to an external drive?, How does one access a backup of a time capsule that was made to an external drive?

Back in Oct my TC was poppping an error that it was full. Research in here told me the solution was to backup the TC to an external HD and wipe it. I now need something off that old backup and don't know how to mount it to retrieve the documents.
I tried to mount it by selecting the EX HD in the TM software however it says the drive is not in a readable format.
At a loss on what to do.
Thanks in advance for the help.

mxracer700 wrote:
I get a ton of greyed out bars (no dates) but only a couple (one date) at the bottom is clickable. It appears to me at least there are a lot of backup windows I just can't access. The recent ones that I can access work fine and they are TODAY and Sept 6 which was likely the day I did the achive.
If you see actual dates there, that you can't access, it means that whatever's in the Finder window wasn't included in that backup. See the pink box in #15A of Time Machine - Frequently Asked Questions.
But if they're just items on a "placeholder" scale, there aren't any other recognizable backups.
As you detail I can mount the ext hd in finder and in the sidebar I get an image "Time Machine Backups" which gives me a folder "backups.backupdb" which has a folder for my mac mini and then only three folders. One is the Sept 6 date, on is 'in-progress' and the third is 'latest'. Going into the Sept 6 gives me access to the same data as going in via TM.
That sounds like you only have the 1 completed backup, of September 6. The "Latest" item is simply an alias to the most recent completed backup.
Before going any farther, try to Repair the backups, per #A5 in Time Machine - Troubleshooting. Use the procedure for an external disk connected to a Time Capsule.
If that doesn't help, it sounds like Time Machine had deleted all previous backups trying to make room for a (very large) new one. See the pink box in #C4 ofTime Machine - Troubleshooting for details.
The .inProgress package is the remains of one or more failed or cancelled backups. You can't use Time Machine to get at it, and there's no telling what's inside it, but it's not a complete backup.
You may be able to find some things in it and copy them, but you may have difficulty with permissions, locked files, etc.
It looks like a file, but is actually a special kind of folder that's treated like a single object for most purposes.
Select it, then right-click it and select the Show Package Contents option. There may be one or more folders with gibberish names, containing partial backups. Navigate through the folder structure to see what you can find. That will be "hit and miss," and the results will be unpredictable.

Time Machine popup message on external drive mount

When attaching a new external hard disk, a dialog pops up asking if you want to use this drive with Time Machine.
How do you turn off this message? We don't need this message appearing every time an external disk is mounted.

I disabled Dashboard in Tiger by going into Dock.app and removing the Dashboard components. Perhaps something similar will work here? I would prefer to alter a .plist to tell the Finder to stop displaying this dialog.
I did some digging in the system and found that Time Machine consists of (at least in part):
backupd
elements of Finder.app (the Finder.app bundle contains Time Machine UI elements such as the background graphic).
In ~/Library/Preferences/ByHost/com.apple.TimeMachine.HOSTADDR.plist
it appears that hard drive GUID identifiers are recorded under the AutoSetupDisks array. I've tried replacing one of the entries with an asterix, in the hopes that it would be read as a wildcard. No luck there.
This is a peek into some of the workings of Time Machine, and from what I can see so far, weeding Time Machine out of the system would be a messy business and involve modifying the Finder, removing backupd and its Launch Daemon, and possibly more.
I would much rather alter a .plist and be done with it.

Two computers can play through AExpr, third one can't!

I'm usually pretty good at trouble-shooting stuff like this, but this time I'm totally stumped!
I have three computers connected via ethernet to an SMC Barricade 7004BR router. Also connected to this router is an Airport Base Station (Graphite). In another room, there's an Airport Express connected to my stereo in "join existing network" mode.
On two of the computers*, I can play music from iTunes to the AExpr speakers. When I select the AExpr from the speakers popup at the bottom of the iTunes window, a message - "connecting to remote speakers..." - appears briefly in the "now playing" (or whatever you'd call it) display at the top of the main iTunes window, and then playback switches to the remote speakers.
On the third computer**, this doesn't work. (And of course, this is the machine with the big hard drive containing my iTunes Library!) This machine can apparently "see" the AExpr - it shows up in the speakers popup at the bottom of the iTunes window. But when I try to select it, a separate AirTunes window appears, saying "Connecting to Airport Express..." This new window displays a barber pole progress bar for a few moments, the AirTunes window closes (no error message or anything), and playback continues through the computer's speakers. If I click on the speakers popup, the AExpr is still listed there. Weird, huh?
I've tried to compare the System Preferences > Network settings and the iTunes > Preference settings on all three computers, and I can't find any significant difference. All three are running OSX 10.4.10. One of the computers that can play is running iTunes 7.4.1. The other two - one that can play and one that can't - are running iTunes 7.4.2. I trashed iTunes from the computer that can't play, downloaded a fresh copy from Apple's website, and re-installed it. Still no go.
Any ideas???
* iBook 500 dual-USB, eMac (can play)
** dual-G4 Gigabit (can't play)

Still no go...
Based on another thread I found here, I went to System Preferences > Network, selected the Built-in Ethernet tab, and used "Assist Me" to create a new location, restarted the computer, and no change. Still can't connect to the remote speakers. (Just on this one computer.)
Then I started from my OSX Tiger disc, ran Disc Utility, repaired the volume (no repairs needed), and repaired permissions, and restarted. I got pretty excited at this point, since several of the repairs mentioned iTunes. But it's still not working.
This seems really weird to me. Why do I get a separate window opening, that says "Connecting to Airport Express..." when my other computers just put a little "Connecting to remote speakers..." message in the "now playing" part of the main iTunes window. Has anyone else seen this before?

Two computers, external drive mounting on wrong one?

Similar Messages

Maybe you are looking for