Two corrupted ipods?

Ok, I'm having some very frustrating problems with my ipod/itunes.
itunes hasn't been able to recognize my ipod for weeks now, although it does show up in Windows. I've tried everything that Apple suggested to do on the support page related to this problem, but with no success. Finally, after reinstalling itunes for the millionth time, it recognized my ipod long enough to say it was corrupted. It said to try disconnecting and reconnecting before restoring it, which I did. After reconnecting it, the itunes didn't recognize it again. I plugged my husbands ipod in later tonight and it also says his is corrupted.
What are the chances of having two corrupted ipods? Does anybody have any suggestions on how to proceed? I'm just about ready to take a hammer to both my ipod and my computer, so any help would be appreciated.

http://docs.info.apple.com/article.html?artnum=300432

Similar Messages

  • Corrupted ipod... can't restore?

    okay, so ill try to provide as many details as i can.
    i've got a 30 gig ipod video. i've had it since christmas 2005.
    yesterday, it suddenly froze, so i restarted it, and the unhappy ipod symbol came up. it was also making a weird clicking noise. i was in florida at the time, but i came home, and it kept doing the same thing. then i charged it, and it would switch on and off between saying "wait a moment, critical low battery" and the unhappy pod symbol.
    now, when i connect it to my computer, the ipod screen says to restore it, and "corrupted ipod found" comes up in itunes, but as soon as i click okay, the page with the ipod options (restore & etc) dissapears, before i can click restore. ipod updater says "invalid ipod service version" so i can't do it that way... please help?

    You may need to fix your iPod with another computer .... but have a read the following first
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Corrupted iPod Nano - restore's aren't working

    iTunes 7.0.2 on Windows XP Pro SP1 (long story).
    G1 iPod Nano (4GB) Firmware release 1.3
    I upgraded to iTunes 7.0.2 and firmware release 1.3 when they came out (a couple weeks ago). I use the device, syncing between iTunes and the iPod daily, and have had no problems with either.
    Today I'm getting the message from iTunes: "iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
    Disconnecting & reconnecting doesn't work.
    Quitting and restarting iTunes doesn't work.
    Restarting the computer doesn't work.
    Hard reset on the iPod doesn't work.
    Restoring the iPod using iTunes 7.0.2, runs, then I get the "Your iPod has ben restored to factory settings..." message, followed by the iPod rebooting, followed by the same message being displayed:
    "iTunes has detected an iPod that appears to be corrupted. You may need..."
    A couple cycles of this does nothing.
    The iPod passes the internal diagnostics test.
    "Settings >> About" on the iPod gives "Songs 0 / Photos 0 / Capacity 3.7 GB / Available 3.7 GB / Version 1.3 / S/N .... / Model MA107LL / Format Windows" which looks all correct to me.
    Forcing it into disk mode, I can browse through the empty directory structure, and can copy files onto and off of the device. iTunes still complains that the iPod is corrupted.
    I've read through 30 or 40 forum postings about corrupted iPods, and haven't been able to find one that matches my scenario.
    Any suggestions?

    Well yo have to do what wmlye says...
    But if you need precise instructions, hey there are:
    1) Connect your iPod nano in your PC
    2) Close iTunes. DO NOT EJECT in iTunes or Windows
    the iPod.
    3) your iPod most be now saying in the screen "Do not
    discconect"
    4) Reboot yor iPod nano for doing this just press the
    menu button and center button at the same time and
    wait until the Black Apple logo screen appears.
    5) In the same Black Apple logo screen after reboot,
    before the iPod its in the main menu, press the
    play/pause button and center button at the same time
    until the screen Says "Do not disconnect" and the top
    title says "Disk Mode".
    6) Now go to Windows Start Button and click on
    Execute and type there "diskmgmt.msc" (without the
    quotes)
    7) Find and Select your iPod in the list, now you
    will see two partitions that are in your iPod find
    and select the partition what says FAT32 (Always is
    the most bigger of the two ;))
    8) Then press the right click on the partition that
    we find on the step 7, and select format, put a label
    of your choice, then select FAT32 as the file system
    type, leave the assignement size as default, uncheck
    the quick format value and press OK.
    9) There is possibility that windows says a warming
    of that the iPod its still being used and more
    technichal stuff, just says OK and your iPod now its
    completly formated.
    10) Open your iTunes and restore your iPod and wait
    until the restore is complete
    11) Now your iPod most be completly fixed
    I hope this info will help you
    Fleur-De-Lisa
    PC x86-32
      Windows XP Pro  
    ok so i did all that and now my ipod nano still does not come up. when i plug it in it says new volume

  • I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

    I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

    Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value).  You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
    In the absence of that option, you will need to restore the content of your library from its original sources:
    Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
    Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
    Content imported from your CDs will have to imported again
    The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these).  Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
    In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above.  As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

  • Can i load two different itunes on the same computer for two different ipods?

    Can I load two different itunes on my computer for two different ipods?  Or how can I get it so that when I click on itunes, only my songs come up and not my wifes?  And the same for her.

    Yes.  The simplest way is to have separate Windows accounts for each user.  When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

  • Can I use the same nike+ sensor with two differet Ipods and register the trainings in onmly one account?

    Hello, I would like to know if I can use the same nike  Ipod sensor with two different ipods. I want to use the same sensor sometims with an Ipod touch and sometimes with an Ipod Nano, I want my trainings with both Ipods to be registered to the same account. I want them to be registered to only one account, not as it had been used by two different people.

    Of course. You should use the same AppleID on all your devices. Why would you create a new one?
    Matt

  • How To Fix A Corrupt iPod

    Okay, this is my first and possibly last post here, I just thought that I should write my solution to this problem as there are a lot of people suffering with a corrupt iPod. I will first recommend you read this topic also if you're still having problems
    http://discussions.apple.com/thread.jspa?messageID=3639883&#3639883
    This will be a long post (sorry), so I'll break things up into an EXPLANTION of the problem and the SOLUTION as I think some people will be thankful for a bit of insight and some people just want a solution.
    read on...
    EXPLANATION:
    My problem occured when receiving a second hand iPod, it had some bugs, stutters and general problems so I tried a restore, this is where my real problems started. After the restore music would not always copy correctly to the iPod, some times returning with a "Windows Delayed Write Failure", also some songs and videos would not play sometimes requiring a restart (reset), sometimes they would return me to the menu straight, and sometimes they would play fine. Also the hard disk would make a lot of fuss just to select certain songs or videos, I would even have trouble booting the iPod or detecting in iTunes.
    These things led me to believe either: The hard disk was cactus; The hard disk had bad sectors; Or there was a file system error on the hard disk.
    When the iPod got really bad it wouldn't properly detect in iTunes, iPod Access, Anapod or Windows, it wouldn't restore in iTunes, and I couldn't access it through windows explorer even in disk mode as it claimed the disk or the control folder had corrupted.
    Using some diagnostic tools I discovered the problem was nothing more than a simple and easily fixed FAT32 filesystem error.
    The problem is that the iPod uses a FAT32 filesystem which is a 'kind of unstable' but not yet redundant filesystem we used back in the Windows 98 days, I assume it uses this filesystem for compatability reasons as pretty much any pc with Windows 98 or above can access FAT32.
    FAT32 stores files in chains, linking one file to another, and branching out like a tree, this system is very easily corruptable due to anything from bad shutdowns or yanking the dock cable of the iPod during copying.
    SOLUTION:
    1:(optional) Check your iPod by reseting it and when the apple logo first appears hold the middle select button and the rewind button to enter a diagnostic mode. Then press the menu button to enter manual testing. Scroll down to IO and press select, then select the hard disk option, then select the hard disk specs option. Read the data to check your hard disk is detected as the correct size (30Gb in my case), if it isn't then reset the iPod and repeat this step until the hard disk detects as the correct size.
    2:Reset your iPod, as the apple logo appears hold down the middle select button and the play button, it will then boot to a screen with a tick in the middle and it will say Disk Mode along the top of the screen.
    3: Now load iTunes and then plug the iPod into your computer and let it detect. iTunes should detect your iPod though it may not properly detect it. If iTunes doesn't detect an iPod AT ALL then reset your iPod and repeat steps 2 & 3 until it does.
    4: Now your iTunes should display your iPod or an iPod just call IPOD, click on your iPod and restore, you can use the same version software or update - it doesn't matter. Even if your iPod normally recieves an error when retoring it SHOULD restore as long as you're in disk mode. When it is done restoring DO NOT UNPLUG THE IPOD, just let iTunes redetect it.
    5: Now go to My Computer and right click on your iPod (could be called Removable Disk and go to properties. Now click on the tools tab and run Scandisk (Check Disk). In the scandisk box that opens tick both check boxes (fix automatically and surface scan) and click run, this will take a while but when it's done go to iTunes and eject the iPod, unplug it from the computer, and reset it.
    You have jsut fixed your iPod.
    Please if you use this solution and it works for you, post your thanks or comments so I know my time wasn't wasted writing this.
    thankyou
    -odsmart

    alright... this one's for raab in Montana
    I'll break your question down into parts to make things easier.
    1: The download error. I don't think your problem is actual iPod corruption per se, it sounds more like an Internet download problem. iTunes requests software (firmware) updates from the server for you and downloads it to your computer, Then updates your iPod. If the problem is that iTunes can't download the software then all the restoring/formatting and scandisking in the world won't help you. I really need a little more info but I think this may help: Are you on ADSL? Alot of Internet providers will not give you a static IP unless you ask and/or pay for one. Long story short, If you are behind a router, gateway or firewall your pc may be blocking the ports that iTunes requires for it's update service. One solution would be to boot your pc into safe mode, cancel the restore option and when your pc is finished booting just try to update your iPod through iTunes. Using safe mode means most antivirus/firewall services won't be running so you may be able to update that way. If not? Well post me some info on your internet connection, all I need to know is if you're on ADSL or not, and what make and model of router you use if you have one. In the mean time, try taking your iPod to a friends pc and installing iTunes and updating it there, if it works there then you'll know it's your pc/setup. Oh well, let me know.
    2: The grinding noise? They do make a noise when scanning through looking for songs and the like, and sometimes they do it for a while but I'm not sure if I'd describe the sound as "grinding". Perhaps if my first answer didn't help then you have bigger problems (hardware problems) I'm not sure, if I could hear your iPod from Australia I'd be able to tell you if it's alright or not.
    3: I mentioned above that my main posts are fixes not to be undertaken unless your iPod has similar symptoms to mine, I cannot stress enough that things like scandisk and format are NOT supposed to be run on an iPod, at least not on a regular basis, and definatly not one after the other. IF ANYBODY'S iPOD DOES NOT EXIHIBIT THE SYMPTOMS IN THE MAIN POST DO NOT USE THE FIX. In particular Raab, your problem seems to be elsewhere.
    Let me know how you go...

  • How to save music from corrupt ipod

    i recently just bought an 80GB ipod video and i just finished putting in my collection of about 40GB of music which i idiotically didnt save on my comp, anyways...i plugged my ipod into my comptuer the other day and it said that it was corrupted and i needed to restore it. but before i restore it i want to take all my music off of my ipod and put it onto my comp, so i DLeda program to do so, but it didnt work because my ipod is not recognized by the computer. ( i have a mac btw). is there anyway i can save all my music..most which is irreplaceable, or is there a special program i can use which is made for corrupted ipods? thanks soooo much in advance

    how do we add the music from her ipod to the music in my library without losing the music on her ipod
    http://discussions.apple.com/message.jspa?messageID=10861128#10861128

  • Can't restore a corrupt iPod classic?

    So my iPod nano 6th gen died on me last night so I decided to dig out my iPod Classic %th gen and see if it worked. I turned on fine so I was like "Happy days!" untill I pulgged into iTunes.
    When I plug it in I get this message:
    So I went through the steps and then this came up:
    I thought the problem was fixed but as soon as I plug it back in that process just starts all over again and I'm getting really frustrated with it. Is there any hope for it or am I stuck with a brick?

    Try the DFU Restore method shown in Corrupt iPod classic.
    tt2

  • Synch bombs WinXP  Pro SP2 on two different iPods

    OK, here's my issue and I haven't seen anyone report anything quite like it.
    I have two different iPods: a 60GB and a very new 160 GB Classic.
    Both "fail" synch test in iTunes but the test output is not helpful in explaining "why."
    I have about 40 GB of mp3 and audiobook files in iTunes.
    If I "restore" either machine and put them on autosynch they will gl through importing all 6,000+ items (as indicated by the iTunes progress window) and then, suddenly, you end up looking at a blank black screen (not the GUI) with flat cursor blinking at upper left...computer hung up stone cold dead.
    If you power down the computer, the iPod will recognize it has been disconnected. Examining it (both) then gives you your various playlists, mostly without content, and a few (like 8 or 10) mp3s and audiobooks at max.
    If I load the playlists manually, one-by-one, I can upload all the content and the iPods work OK (but still fail synch tests).
    After uploading the bulk of the material, I can put them on autosynch and make minor changes such as adding a song or two and they will synch to completion. But neither will execute a complete upload without crashing on autosynch although placing the same amount of content manually works OK.
    Anyone ever see this behavior?

    Pull your OS X drive.
    XP and Vista 32-bit only give you 1.9GB of RAM.
    If you don't need native access or 3D you might just want to later use it with Fusion, VirtualBox or Parallels.
    Apple uses GPT (GUID) which creates those small 200MB and 128MB partitions you see that are essential.
    For me, I would just format the drive as MBR, and FAT/MSDOS or if you have NTFS from MacFUSE or Paragon, format as NTFS (preferable), and pull OS X and then install.

  • Corrupt files on computer or corrupt ipod?

    My first ipod 30 gb would not work because of corrupt files after 1 week. I could not fix it. My second ipod never worked. I uninstalled, reinstalled, etc. Always the corrupt ipod message. I returned it after viewing all the messages on this board. Could it be my computer is the problem, not the ipod? I would really like to use an ipod but have no idea what to do. Any suggestions?
    Dell Dimension 8200   Windows XP  

    Always the corrupt ipod message.
    what was the precise text of the message? (there's a few different possible ones i can think of.)

  • HT1495 i have one apple account with a iphone and my two boys iPod touches. how do i get them set up to be able to text or facetime with out using my number or email account?

    i have my iphone and my two boys ipod touches on my account we recently got internet at our house (i live in BFE) im wanting to know how i can set ther pods up to send and receive text via imessage with out it coming and going to my phone. i want them to be able to send text to me or thier mother and it says their name as opposed to mine

    Get a separate email address (gmail?) for each of the iPods.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Corrupted ipod

    I've recently bought a 60gb ipod with colour display.
    I loaded a friends itunes on which went as planned with no problems, however 4 weeks later I'm experiencing a few problems with it.
    1. iTunes tells me it has detected a corrupted ipod and recommends I restore it.
    2. Seeing as this will erase everything I found some software by Anapod called CopyGear which I was hoping to use to backup the music on my ipod but this too cannot locate any connected ipod device.
    It's driving me mad and I don't want to loose the music already loaded. Can anyone help please?
    Ben

    When the iPod becomes corrupt then you have to restore it. This is why it's never a good idea to store music music on the iPod only. That's what your iTunes library is for.
    If a third party program cannot detect the iPod, you are stuck, and you'll have to swallow the fact that the music will be lost.

  • Corrupted ipod nano 1st gen

    I have a corrupted Ipod nano 1st gen... and restoring the nano wont work at all... I cant find a single way to fix it...

    it shows a folder with a yellow triangle with a exlamation mark next to it and it also shows something saying corrupt on the bottom and the apple website on the bottom

  • How do you fix a corrupt ipod nano 4th gen

    how do you fix a corrupt ipod nano 4th gen?

    Hi bigmike94610,
    Welcome to the Apple Support Communities!
    For iPod nano troubleshooting I would suggest the troubleshooting outlined in the following web link. I would suggest working through the steps in the order presented on the website, but you may ultimately need to restore your iPod. 
    Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
    Best regards,
    Joe

Maybe you are looking for

  • How to implement setLineWrap equivalent method in a JTextPane

    I using a JTextPane in a chat Window, but if in this are writing a very large line this don't break lines as in the case of the setLineWrap(true) method for a JTextArea. How to implement break lines in a JTextPane equivalent to the setLineWrap(true)

  • [AS2 from Amazon] Could not find suitable party

    Dear all, I try to configure an AS2 EDI connection between Amazon and our PI system. Amazon offers a test tool where IDs are mentioned: Example: Sender AS2 ID     ASxxx17 Receiver AS2 ID  AmazonProd I created a Party with Identifier: Agency: Seeburge

  • Regarding Traction code Creation

    Hi All, How to create Transation code for Database Table Entries. I mean i have Database Table. I have to use TCode for entering the data into that table. If any one give the solution usefull for me. Thanks in Advance. Subbu.

  • Color management problems Epson 4000

    I have installed the latest (3.0.9) drivers for my Epson SPro 4000 and I am using Leopard. The printer works, That is it responds to the computer (MacBook Pro), but it prints like it is not recognizing the printer profiles I select in Photoshop or Li

  • Advice for working with large clip files

    A few years ago I made a movie using iMovie2. At the time I was working with clips recoded on one minidv disc. I am now ready to begin a project (just bought iLife06) that is much larger. I have roughly ten 60 min minidv discs. I am getting nervous a