Two CUA in one Landscape

Hi All
Is it possible to maintenance 2 CUA in 2 different SolMan in one landscape?! I want to make first CUA - primary, second - in standby mode (the goal is to have automaticly updated reserve copy of CUA on the 2nd SolMan).

Konstantin,
why would you not leverage the possibility of Netweaver High Availablity Cluster Solution instead of having one single SAP System sitting and doing nothing? Or will you have that second system in any case and you just want that one to be prepared to act as your real CUA, whereas that second system still performs its own job. For whatever it might be designed
Nesimi

Similar Messages

  • Two NWDI systemes in one landscape

    Hi all,
    I was wondering if it is possible to have two NWDI systems in one landscape (sharing same SLD) and do track forwarding between these two NWDI systems?
    The reason I want to do this is that I want to move the NWDI system to another platform. To avoid a big bang situation I would like for the developers to be able to "forward" the code from one server to the other as they like (over time).
    Do any of you have eny experience in this area?
    Thanks.
    Regards
    Paw Iversen

    Hi,
    First of all thanks for your quick reply.
    Our situation is that we have a existing NWDI system connected to one SLD. We would like to install a second NWDI system connected to the same SLD. We would then like to close down the "old" NWDI system. But in order to save the development components from old SLD we need some form of transport to the "new" NWDI system. A possible solution I thought of could be to create new tracks in the "new" NWDI and forward the existing SCs from the "old" NWDI system to the "new" NWDI system.
    The reason we want to do this is because we would like to move the old NWDI system to a new platform without doing a system copy.
    My question is then if its possible to make this kind of forwarding between two NWDI systems (connected to the same SLD to share component information).
    Best regards
    Paw Iversen

  • Move transport requests from one landscape to another

    HI Gurus,
       I am facing a situation where i need to import the Transport Request from one landscape to another.
        Consider i have two  landscapes DE1 TE1 PE1  and  DE2 TE2 PR2. and both the landscapes are on
        different release.
         I have created a Transport Request DE1Kxxxxxx.
         And now i want to use this transport request in the other landscape of DE2 TE2 PR2.
       How can i do that. Is there any process in using the Transport Request created in another landscape of different release.
    Please guide me.
    Thanks in Advance,
    Sachin Kumar.

    Hi,
    Just do manual copy of both data and cofile to second landscape...there you need to change the naming conventions(SID)....But it will works only that is a customizing request...cause developments will depends upon installation nubers....
    warm regards
    Harish K Reddy

  • If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad  with the same Apple ID, why can't I get 5 GB fo each of them?

    If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad  with the same Apple ID, why can't I get 5 GB fo each of them?

    Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for.  What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • How to configurate system for two database under one server

    Hi Friends,
    I installed abd created A database by oracle 10GR4 in window 32 bit 2003.
    it works.
    Then i created other B database by DBCA under this server.
    When I shutdown immediate database.
    it works well. But I can not startup mount ot startup A database again,
    I got below message as
    SQL> startup mount;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> startup;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> startup;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    From EM, I saw as
    A listen Status Up
    LISTENER
    Oracle Home          
    C:\oracle\product\10.2.0\db_1\BIN
    Location          
    C:\oracle\product\10.2.0\db_1\BIN\network\admin
    BUT agent connect Status          
    Failed
    Details          ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
    A database instance down
    Host     salerpt.net
    Port 1521
    SID SALERPT
    Oracle Home C:\oracle\product\10.2.0\db_1\BIN
    Also I try to connect as
    SQL> connect sys/salel@salerpt as sysdba;
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    Form EM, I saw listen start up.
    Then I stop it. then restart it
    I can saw B db listen and can not see A db listen.
    also
    I saw that other B database works.
    My listen info as***************
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1\BIN)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = SALERPT.NET)(PORT = 1521))
    I check physical, two database use one common bin directory .
    I do not have any experience to handle two database under one oracle server.
    How to check and configurate DB server system?
    Thanks for help.
    Edited by: user589812 on Jan 4, 2009 8:17 AM

    Jim,
    Before starting the database A, did you set ORACLE_SID=A from command line? You can run as many instances you want from single server provided you enough memory, processing power. Also try starting your instances usign window services and check and post some lines from alert.log for database A.
    tnsnames.ora entry
    DATABASE_A =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DATABASE_A)
    DATABASE_B =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = salesrpt.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DATABASE_B)
      )Regards
    Edited by: OrionNet on Jan 5, 2009 10:55 AM

  • I have an iPhone 4, My itunes are from two differnt accounts; one from when I was under my dads account, and the other is my own. My question is would I be able to sync and update my itunes on my MacBook without having all the new music erased.

    I have an iPhone 4, My itunes are from two differnt accounts; one from when I was under my dads account when i was younger, and the other is my own which i currently use. My question is would I be able to sync and update my itunes on my MacBook without having all the new music erased. I have the icloud on my phone, but I just want to update my music on my laptop. Just nervous to, because it has happened to me before on a desktop computer  and it *****. Please help! Thanks.

    nevermind, i figuered it out

  • About combing two array into one

    Hi all,
      I post a questiona bout converting an array of integer into char (byte) array and I got a solution already http://forums.ni.com/t5/LabVIEW/how-to-display-char-code-properly/m-p/2596087#M780368
    However, I enouther another problem while dealing with an array of  U16 type. I would like to extract the high and low byte from numbers (U16) stored in array. I extract the high and low byte for each U16 number and convert them as char, concatenate them to a string. Repeat this process for each element in the array so to get a big string with each element is a char for high and low byte. My code is enclosed as follows
    It works fine but I am concerning the speed. Is that any other way to do it fast and don't use loop (in real case, I will deal with pretty big array many times, efficiency is a problem). Note that the high and low bytes array extracted from the original array with the module Split number.vi, but how can I combine these two array in one code with data arranged as high-low-high-low ... ? Thanks.
    Solved!
    Go to Solution.

    PKIM wrote:
    However, I enouther another problem while dealing with an array of  U16 type. I would like to extract the high and low byte from numbers (U16) stored in array. I extract the high and low byte for each U16 number and convert them as char, concatenate them to a string. Repeat this process for each element in the array so to get a big string with each element is a char for high and low byte. My code is enclosed as follows
    It works fine but I am concerning the speed. Is that any other way to do it fast and don't use loop (in real case, I will deal with pretty big array many times, efficiency is a problem). Note that the high and low bytes array extracted from the original array with the module Split number.vi, but how can I combine these two array in one code with data arranged as high-low-high-low ... ? Thanks.
    You need to be more clear.
    Looking at the code, you are dealing with I16, not U16. Also your index array primitives could be replaced by autoindexing. Your use of the feedback node only makes sense if you want to append strings forever with stale data, thus growing data structures without limits. If you only want to convert the current data, remove the feedback mode and use a "concatenate strings" with a single input. A for loop is one of the most efficient data structures and using it is not a problem. One way or another the code needs top oerate on all data.
    All that said, I agree with Tim that most likely all you need to do is insert a typecast after the "to I16" and eliminate all other code.
    LabVIEW Champion . Do more with less code and in less time .

  • Hi. I am having an issue with music on my Ipod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one wi

    Hi. I am having an issue with music on my IPod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one with only Islands on the Coast, and the other having Islands on the Coast with 3 other songs. If I delete the album with only one song from my IPod, it deletes the song from the other "album" as well. If I go to "All Songs" by Band of Horses, it only shows one Islands on the Coast, so it is not a duplicate issue. Also, in Itunes, it only shows one album. I just recently updated to iOS5 on my 4th Gen IPod Touch, if that helps.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • WinXP with two users - can we have two separate iTunes, one for each user?

    Question:  On my Dell WinXPPro SP3 desktop with two users (myself and my wife), can each user have a separate iTunes - so what each of us does with iTunes has no effect on the other?
    Details:  Yesterday, June 29 2012, I bought a new iPad 3 with WiFi only, my first Apple product.  My #1 motive for buying it is to copy movie files (avi, m4v, mp4, etc.) from my WinXP setup (PC plus hard drive) to my new iPad to watch the movies in bed on the new iPad. I understand that I shall need to install iTunes on both the iPad and the PC in order to move or copy the existing movies from the PC side to the iPad.  (I also understand that I won't be able to use iCloud because iCloud will not run on WinXP, only Vista and Win7.)  [By the way, if iTunes will NOT help me do what I want to do, please let me know.  But that is not my question.]
    I am only one of two users on the PC.  My wife is the second user on the PC.  She already installed iTunes on the PC for her own use.  She is an avid iTunes user.   Most of the time, she does not use this PC.  She has her own WinXPPro SP3 Dell laptop, which is what she uses 99% of the time.  She has also had an iPod for some time, hence her use of iTunes.  And now, for the last two weeks, she also has a new iPhone 4S and her own iPad.  So her use of iTunes will grow.  The important point is the following - whatever I do on my side, I do not want to interfere with or disrupt her use of iTunes.  Not even for a second.
    So, can I install or re-install or somehow set up iTunes on MY user on the PC so that it does not in any way use or affect her iTunes?  If the answer is "yes", please give me a step-by-step and list all details.  Is there a YouTube that shows this specifically?  
    More details:  Right now, in C:\Program Files, before I have tried to install anything myself, there are already folders for Apple Software Update, iPod and iTunes, which derive from my wife's installations of these Apple programs some time ago.  I have just now run the Apple Software Updater, which first updated itself on this PC to version 2.1.3.127 and then updated her iTunes on this PC to version 10.6.3.25.  (As a result, the following processes/services are now running, which normally don't run when I am the user: 
      C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
      C:\Program Files\iPod\bin\iPodService.exe
      C:\Program Files\iTunes\iTunesHelper.exe
    Also, the following processes will launch the next time I reboot this PC (which normally don't launch when I am the user):
      C:\Program Files\Common Files\Apple\Apple Application Support\APSDaemon.exe
      C:\Program Files\iTunes\iTunesHelper.exe )
    My wife says her iTunes is NOT set for Family Share.  (That sounds correct to me, for now and forever.)
    Summary:  So, how do I install iTunes for myself (for the first time) for my user on this PC so it does not - even for a second - interfere or affect my wife's use of her iTunes on all of her devices?
    Thanks !!!

    Mr. Wiclee - thanks for the link.
    When I said I had not "installed" iTunes on my iPad, I suppose I meant I have not yet signed in to iTunes, ever.  I suppose when I sign in to iTunes the first time on my new iPad, I will be required to create a new iTunes account?  Then refer to such new iTunes account when I launch iTunes for the first time on my PC as myself?  Or will I still need to use Method Three in your link? 
    The crucial thing is this - when I turn on iTunes on the PC for the first time with me as User, I do NOT want it to connect to my wife's iTunes account.  On my PC, I would want iTunes to ask me who I am, so I can then sign in with my new iTunes account that I had just created on my iPad.  How can I be sure to accomplish this goal?
    In my PC, if I look at Documents and Settings and compare the two folders for we two different users, one for me and one for my wife, I can see that my wife's has Application Data and Local Settings for her various Apple programs.  However, so do I in my User even though I have not yet installed any Apple programs on my side.  I am concerned that when I finall launch iTunes when I am user, it will open up in my wife's iTunes account, which I truly want to avoid.
    Thanks.  Please advise.

  • How to print two sides with one page?

    I have a PDF that is one page long and I'd like to print the same thing twice (front and back) on one page. Can I do that?
    I've tried printing two copies with the printer set to double-sided, but it just printed two sheets with one side on each sheet.

    Well sure; Go back to the authoring application that created the documents and do a 2-UP page. Make the existingg page large enough to accomodate the extra content. Is that what you're asking or do you really mean print to a printer with a back up ? In that case just flip the page over and print page 2 on the other side.
    Or are we missing something ?

  • I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?

    I accidentally set up two accounts.  One account with my old e-mail address which I've been using for years and has all of my purchases on it.  Now I have a new account with my current e-mail address. How do I disable this new account?  I need to disable the new e-mail address account so that I can add it as an additional e-mail to my old account.  THEN, how do I make this new e-mail address my primary e-mail for this old account?

    Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
    Next see:
    Frequently Asked Questions About Apple ID

  • Print to two printers with one command?

    Is there a way to print the same document to two printers with one command? I'd like to have every document I print automatically saved as a PDF at the same time.
    Thanks,
    Mark.
    MacBook Pro (and 5 others)   Mac OS X (10.4.9)  

    That would be a good use of the PDF Services available in OS X. You can use PDF Services with AppleScript or an Automator workflow.
    Matt
    Mac Mini G4; B&W G3/300    

  • How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

    This is complex.  Until today we had one iMac with two user accounts - one for me and the other for my wife.  We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us.  Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd.  (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
    We've finally bought my wife an iPhone and set up an iCloud account for her.  And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff.  But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine.  But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
    Originally I tried a workaround by simply having her iPhone log into my iCloud account.  That works great for the calendars and the contacts.  But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account.  And neither of us want to sync our other things to each other's iMac accounts or iPhones.  Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's.  So we definitely don't want this as the set-up and communications network between our devices.
    We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone).  Does this description make sense to you?  I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work.  If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
    If anyone can help me set this up I'd be most appreciative!  Thanks so much.  Merry Christmas and Happy New Year to all readers in this community!

    BobT.
    I had the same problem, and decided to look into it last night.
    First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing. 
    Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
    1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
       Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
    2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
    From this point on, the 3 devices should sync contacts with each other.
    This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

  • How do I sync two iPhones to one computer?

    How do I sync two iPhones to one computer?

    if you want to keep same content on both you can sync them to same itune account
    else create different itunes account for the other phone
    syncing with itunes
    http://support.apple.com/kb/HT1386

Maybe you are looking for