Two Cuda gpu's non sli in photoshop

Ok I finally just build another computer. In building I found out my old 8800gt card was not the culprate of an earilier problem so it actually usable! I currently have gts250 installed...I know I know it was sidegrade not neccisarly much of an upgrade. It was in all honesty (a replacement) Tha aside. I currently run two monitors. One 24 and another 22 or 23..forget. Will I gain any edge in using both cards hooked up to both monitors? ie does my cuda processing accelerate or does photoshop and premiere only see the one card. I know SLI is a completely different beast. Just wondering of the extra Cuda Processors are helping. If not I would rather leave the outrageously loud and hot xfx 8800gt out of the equasion all together. Please help and thank you!

No, no and no. Premiere Pro CS5 will only use CUDA acceleration on certified cards which currently includes the GTX285 and Quadro 3800/4800/5800 only. That aside, asymmetric monitor configurations have the usual downside of preventing the card from playing out full acceleration in the first place since they require separate buffers and possibly separate timing, which effectively kills any optimizations. Running two cards does not change that, especially if they, too, are completely different models, introducing their own overead for keeping them synced and whatnot. so in the end, with your current setup it's a lose-lose proposition.
Mylenium

Similar Messages

MSI P6N SLI-FI - two video cards non SLI help

Hi,
I am currently running Win 7 Pro 64bit on a MSI P6N SLI with a GeForce GTS 250.
I would like to run 3 monitors and thus install another video card. I was thinking about an GeForce 9400GT using PCIe.
My manual tells me I can only run two video cards in SLI mode, which I don't want to do.
Searching this forum, I found two contradicting posts; one telling me that it is possible to run two cards non-SLI (https://forum-en.msi.com/index.php?topic=107857.0), one telling me it's not (https://forum-en.msi.com/index.php?topic=124883.0).
Can anyone tell me which one's true?
And as an alternative, would it be possible to use a PCI (non-PCIe) card like a GeForceFX 5200 additionally to my GTS 250?
Any help would be appreciated,
greetings
cmdkeen

that guy would be me and yes, my pc BSOD-ed like hell with a 8600GT and a 9800GTX, but only after a few days.
maybe it was a driverissue, but I gave up after a 3 weeks
now im running a 250GTS alongside the 9800GTX (non sli !!) and that works fine, since the 250 is essentially a rebranded 9800GTX.
so dont be to happy yet and wait for a few days/weeks and see how it goes.
if it BSOD's, best bet is to get an identic vga, would be my advice.
good luck an keep us posted.

How to: Enable CUDA GPU Support for "Unsupported Cards" in CS6 (same process as in CS5+) :) for MAC

Hi all, I previously was involved in some discussion regarding GPU acceleration with CUDA in Premier Pro CS5 using an 'Unsupported card' with my Macbook Pro... I would like to show you this still works and will be here to show the process for anyone, and will post a video of the whole thing as a step-by-step probably tomorrow (its quite late where i am just now) but I'll give you a quick run through just now... Proof at bottom of page...
Ps. This only applies to Nvidia card Macs.. I have no ATI card mac to try this out as OpenCL etc but i would imagine it would be a similar process...
Step 1... Install Cuda drivers for your Mac (im using 4.2.7) here   http://www.nvidia.com/object/mac-driver-archive.html
Step 2... Install GfxCardStatus and force your graphics (if using a laptop) to discrete card only   http://codykrieger.com/gfxCardStatus
Step 3... Open Terminal... and run GpuSniffer... path as follows for original default installation directory, copy and paste then hit enter or change as required
              /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/GPUSniffer.app/Contents/MacOS/GPUSniffer
This should give you an output as follows, while it may differ this is my output...
--- OpenGL Info ---
2012-05-02 01:00:28.642 GPUSniffer[6661:2403] invalid drawable
Vendor: NVIDIA Corporation
Renderer: NVIDIA GeForce GT 330M OpenGL Engine
OpenGL Version: 2.1 NVIDIA-7.18.11
GLSL Version: 1.20
Monitors: 2
Monitor 0 properties -
   Size: (0, 0, 1920, 1080)
   Max texture size: 8192
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
2012-05-02 01:00:28.666 GPUSniffer[6661:2403] invalid drawable
Monitor 1 properties -
   Size: (0, -1200, 1920, 1200)
   Max texture size: 8192
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Found 2 devices supporting GPU computation.
CUDA Device 0 -
   Name: GeForce GT 330M
   Capability: 1.2
   Driver: 4.02
   Total Video Memory: 511MB
OpenCL Device 1 -
   Name: GeForce GT 330M
   Capability: 1.1
   Driver: 1
   Total Video Memory: 512MB
   Not chosen because it did not match the named list of cards
Step 4... Using the name of your card from the above output, i have it underlined, in my case a GeForce GT 330M, copy this exact name as we will now add it to the list of supported cards...
Step 5... Using terminal still, again assuming default install directories, copy and paste then hit enter on the following...
             sudo nano /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/cuda_supported_cards.txt
You will then be asked for your computer password, type it and hit enter, it will not be shown as you type FYI... You will then see the default supported cards, add your card by pasting the name you have as in Step 4, then use ctrl+x to escape, type Y to save and hit enter a couple of times to get out...
You should now be able to run Premier Pro CS6 using the CUDA GPU option you can select in Renderer as you start a new project!!
Any questions i will try to answer them as soon as possible, and as i said i'll screen capture and record a video tutorial as i know that would be of help to some of you out there.. Some proof, here is a pic...
PS. It is a full 1080 pic so it is quite large...
Message was edited by: StuCS5 - Changed Font Size

Very usefull! it worked perfectly on premiere cs6 on my macbook pro 2.8ghz with geforce gt 330m, Any suggestion for enabling ray traced 3d also in after effect? I inserted the geforce gt 330m on the after effect card list, but when i enable ray traced 3d the text in the comp disappear!
thanks!

Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5: EIZO CG 277 Coloredge o

HI,
Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5:
EIZO CG 277 Coloredge or NEC PA-272W.
Thanks in advance for your reply.

It depends on where you are. Things are very different in Europe (Italy?) compared to the US situation.
The price difference between comparable NEC/Eizo models in Europe actually goes in Eizo's favor. The regular NEC PA272 in Europe cannot be hardware calibrated (it has a firmware lock) and the comparable offering would be either the NEC Spectraview 272 or the Spectraview Reference 272. These are more expensive than the Eizo CG277.
Note that the European PA272 can be hardware calibrated with the US Spectraview II software - but that software cannot be bought in Europe and has to be imported from the US.
All these displays are top reference quality. As for calibration software, which is a very important part in the equation, my vote goes to Eizo's ColorNavigator (I have a CG246). It is a superb piece of well thought-out software. The US Spectraview II - which I also happen to have - is a very, very close second, but the European Spectraview Profiler software that you get with the EU NEC units isn't all that impressive.
Photoshop supports a 10 bit display pipeline, with either display, as long as you have a video card that also supports it. Lightroom doesn't support it.

Hello On the creative cloud there are two versions of the software, for example photoshop cc and photoshop DC (2014) what is the difference thank you

hello
On the creative cloud there are two versions of the software, for example photoshop cc
and photoshop DC (2014)
what is the difference
thank you

See Installing the 2014 Release of Creative Cloud « Julieanne Kost's Blog

Two hours still can't scan with photoshop cs6

two hours still can't scan with photoshop cs6 any ideas?

Hi,
Thanks for responding. Windows Vista - installed Flash Player 11 - no change -
updated all drives on HP PSC 2355 scanner - no change - added twain 24 bit
because read that 48 was not compatible with cs6 - no change.
Basically, when I go file - import - I should see the option WIA -HP PSC 2350
and it is not there which tells me my scanner is not integrated with cs6 as it
was with cs3.
Any ideas?
Richard

I keep crashing in iPhoto and this is what came up in the reportpanic(cpu 2 caller 0xffffff7f9f97bfac): "GPU Panic: [ None ] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80bcf6b000

Hi can someone help me? iPhoto was causing me issues, always crashing so I updated to OS X and then reinstalled iPhoto but it still crashes. Rebuilt the database too. Here's what it says...
panic(cpu 2 caller 0xffffff7f9f97bfac): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80bcf6b000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127

If that's a mid 2010 MBP then there is a recall on those for repair to the Graphics Card. Contact your Apple dealer for more.

I am trying to set up two-factor authentication but none of my devices appear listed.

I am trying to set up two-factor authentication but none of my devices appear listed. I am only given an option to add an SMS-enabled device. When I do this, I receive an SMS with a code, but have no way to continue in the browser. I have enabled find my iPhone on at least one device, and can see all my devices in the find-my-iPhone app. Am I missing something?

As a check, this page walks you through the process:
http://technofyi.com/2013/03/21/how-to-enable-apples-two-step-verification-featu re/
His step 6 shows the 'Step 1 of 4' page where you should click 'Add an SMS-capable phone number'.
His step 7 shows the 'Add a phone number' window where you can enter the phone number and click 'Next'. The phone should then receive the code by SMS.
His step 8 shows the 'Verify Device' window which should appear automatically in which you can enter the code.
Are you not seeing the window in step 8? if this is not popping up automatically then something is going wrong: you could try clearing your browser's cache and trying again. If it still won't work you may have to contact Support: Go to https://getsupport.apple.com ; click 'See all products and services', then ' 'iTunes', and then 'iTunes Store', then 'Account Management' then 'Apple ID account security' - this seems to be the nearest relevant option.

I have purchased several new digitizers for my ipad 2. I test if before I actually seal it. After I seal it , maybe about an hour or two later it has non reponsive areas

I have purchased several new digitizers for my ipad 2. I test if before I actually seal it. After I seal it , maybe about an hour or two later it has non reponsive areas

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

K8N Neo4 Plat (non sli) Device manager error !

guys:
need some help. as stated,, have just received a k8n neo4 plat (non sli). just installed win xp pro (many thanx to people on forum for good tips on coming up clean). i have 1 problem, i have 1 item in device manager banged out (!), its a "PCI Memory Controller. i have nothing on mobo cept 1 6600 gt video card, 1 stick mushkin 3200 dram, i maxtor 200gb sata hard drive. searched on msi's site for this driver and can't find it. any ideas on what i'm missing?? sorry for not having rest of sys specs in sig but just got this puter up and running and i would like to get this driver installed before i pack it in for night. thanx for any help on this one.

igmox:
thanx!!! standalone drivers did the trick. when i was puttin this puter together i downloaded the standalone drivers and extracted them onto a cd. when i booted, anything in device mangler that was banged out, i updated the drivers via the cd. this time i downloaded the standalone drivers, ran the exe (unchecked the ide drivers, since i'm gonna try and run 6 dvd burners) and viola,, driver found.

NON SLI MOTHERBOARD

I am looking for a non sli motherboad,That uses socket 939,pci express,to replace my kn8 neop latium socket 754.
I was going to buy a XFX Geforce 6800 GT 256MB AGP8X ,having see the same graphic card in pci express for about the same price,upgrade the socket 754 AMD 64 3000+,to a higher spec,looking at te forum Socket 939,for me is the right way to go,if the prce is right,The problem for me is choosing the right 939 processor, and motherboard made by (MSI)
Thanks for the help.
dodio

NEO 4 ;-) I've no problems with it

K8N Neo4 (non SLI), does it have dual core support?

Hi, I've got a few questions:
- Can I install an AMDX2 4200+ processor in my K8N Neo4 non-SLI motherboard (model MS-7125)?
- If I can, do I have to update my BIOS? I bought this board in March of 2005.
- If I have to update my BIOS, how can I do it? I don't have a floppy drive, and the Live Update thing doesn't seem to be working.
Thanks for any help.

Quote from: Flexstyle on 01-June-07, 00:48:59
Hmmmkay here...
Well, I tried to find the USB legacy support, but I looked in every menu and submenu and I couldn't find it. Also, it turns out that I gave some misinformation--the USB options for boot are FDD, ZIP, and CD. Not even support for a HDD!
So, I'm back to square one.
Can I flash from a floppy...? I can probably get my hands on one if needed.
Or even better, is there a way to boot the flashing app from a CD?
"Well, I tried to find the USB legacy support, but I looked in every menu and submenu and I couldn't find it. Also, it turns out that I gave some misinformation--the USB options for boot are FDD, ZIP, and CD. Not even support for a HDD!"
in BIOS, ---> "Integrated Peripherals" ---> "USB KB/Storage Support" and Enabled it. then "SAVE AND EXIT" , hit F11 or F8 during post, then choice USB-ZIP, or USB-HDD and boot from it.
"misinformation--the USB options for boot are FDD, ZIP, and CD. Not even support for a HDD!"
choice USB-ZIP.

MSI neo4 plat(non sli) sound problem.... and other problem...

hi
(sorry for my poor english)
FIRST ISSUE
ok here is the deal, i got no sound when using the rear panel of the mother board... but when i use the front panel of my case there no problem and i get sound....
after reading a lot on sound problem i try first to change my bios so i check the 1.8 and the 1.6 but still no result... , i also try to use the nvidia sound drive instead of the raitek one.... but still nothing ... in the system all appeare to be ok, windows dont detect any conflict on hardware on so one... even the nvidia mixer equaliser move... but no output...
i also read a litle about the compatibylity issue betwen the mobo and the atx2 PSU standard with the using of the 5v pin...,but as far i read it seem that this is only on the sli version...do this issue also concernt the non sli version ?can this explain my problem ?
SECOND
i got from time to time a bleu screem with the message DRIVER IRQL NOT LESS OR EQUAL.... can someone now what can cause this ?
thank

Hi!
I am also facing this problem with my K8N NEO4 Platinum Ultra.
I have even tested my PC with a PSU which is having -5v in it's rating.
I have also requested a help from MSI Support.
Their & My reply is as follows.
But still my problem could not be solved. My sound card as per the OS works fine and produces output. But no audible output for humans to hear.
This is the case with both front and rear panels.
I have even sent the MB for RMA but here in India, people are fools. Even from RMA the board was shipped back in the same faulty condition. What to say? Whom to curse? Only money and 20days were spent waiting for repair and in wain.
If any body can help it will be very nice.
Here is my reply to MSI:
My K8n Neo4 Platinum Ultra - earlier was giving good quality sound output. Later after 15 days of using this board, it does not give any audible sound at all. But through headphone socket of cd player I am able to receive good quality sound.
And also while using CD Player to play audio tracks, the output is very intermitent and feeble with lots of cracking noise and poor quality audio is heard.
Through Windows Media Player no sound is heard at all.
I reinstalled win2000/Win2000Server/Win2003 XP Server. In all the platform sound problem exists. Any solutions?
My PSU has 20amps in +12V rail and has no -5v. 24 pin adaptor with 400W.
SATA HDD 80GB WD. 256*2=512mb DDR 400 Ram.
CPU AMD 3000+ Winchester core.
Thanks in advance.
REPLY FROM MSI:
Dear SoftWheels:
Thank you for contacting MSI Technical Support.
With regard to yoru concern, we would like to know before the onboard sound function abnormally, if you have made any adjustment to your system hardware or software?
And at this time would you please try to un-install the sound driver in the Add or Remove Program, then install the ALC Series AC'97 Audio Drivers refer to the link below, after this please first check if in Device Manager there is any yellow mark.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=637&kind=1.
AGAIN MY RESPONSE TO MSI:
Dear Sir,
Thanks for your reply. But reply does not solve my problem. I have tried all that you said in your reply.
I have done nothing to hardware. No electrical problems or burning.
Due to no sound, I have even totally zero filled my SATA hard disk, updated bios, re-installed

CUDA GPU supported NVIDIA card.

My customer having HP XW4600 Workstation with Quadro FX570 NVIDIA card. Now they tried for CUDA GPU Computing. But FX570 not supporting . What is solution. Suppose I have to changes card. Which sutiable card. Kindly advice.

I am not familar with the CUDA. However, The following quickspec says: http://www8.hp.com/h20195/v2/GetPDF.aspx%2Fc04287897.pdf High-Resolution Antialiasing: GPU Computing (HW/SW including CUDA SDKCUDA™ Parallel Processor Cores: PCA with ATX bracket, DVI to VGA converters, HDTV dongle, CD and manual The NVIDIA FX 570 seems to support the CUDA. What is the OS? How did you run the CUDA GPU Computing?

K9N Neo-F (non-sli) onboard sound card cant install winxp sp2

K9N Neo-F (non-sli) onboard sound card cant install winxp when ı install driver I see this device cant start (code 10)but first install working but now ıcant install sound device pls help me...
K9N Neo-F non sli nforce 550 motherboad
Asus X550HM pci-E vga card
Aopen HB600 400w power
Veritech 512 mb 800 mhz single ram
samsung 160 gb&250gb sata2 hdd

Tried to uninstalled those driver again. ALso what NVidia driver are you using? Tried to used the latest drivers from Nvidia. What are the rails for +12V PSU in the labels? Gd luck.

Two Cuda gpu's non sli in photoshop

Similar Messages

Maybe you are looking for