Two days ago, Skype stopped accepting 1.800 toll f...

For the past two days, when I use Skype to place a 1.800 or 1.855 call, the number does not connect and the error message is "call dropped". I tried two other computers in our area and they are having the same problem.
I am calling from Kabul, Afghanistan, if that makes a difference. I don't thing so.
However, I can still contact my Contacts, but the "call phones" aspect of Skype is not working.
Your comments and observations. Thank you.

Hi everyone,
Please be so kind and contact Skype Customer Service.
I also suggest you to try calling again. Also make calls from landline or different device. Why? Because our team would need the most recent failed call records. Please include these details in your support request (number, time and date and if it worked from landline/mobile phone or different device that runs Skype).
Thank you.
See: https://support.skype.com/en/faq/FA1170
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

Similar Messages

Two days ago Mail stopped sending my emails.

Two days ago Mail stopped sending my emails. I am using OS 10.10.2. Connection Doctor shows the connections as green. I can send from my iPhone in iOS, but from my Mack Book Pro, nothing sends. What changed? How do I fix this. I get an error message saying "The identity of smtp.cox.net cannot be verified. The certificate for this server is invalid. … When I ask it to connect anyway, or try the send again, I get a second message saying "Cannot send message using server smtp.cox.net… Authentication required."
Connection doctor says "Connection to server succeeded; login not required."
How do I fix this?

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
If that's not what you see, post the contents of the window.

Two days ago two of the forum I use stopped working as they did. Google Chrome can open these sites without problem. I have checked that Javascript is working. What can I do to get the sites back to the way they were?

Two days ago two forums I regularly use stopped working properly. One of them is www.mobileread.com, and the main problem is with marking the forums read. The staff there suggested that I check that Javascript is enabled. It is, but the problem remains.
The other site just looks as though there is no styling on the index page; it just shows a list of links.
I can use both sites with Google Chrome just as I did before, so it has to be a problem with Firefox.
There are many other sites I visit, and I have not had the same problem there.

For the one with a styling problem, see what you have for View > Page Style
the normal style is default and "No Style" would wipe out styling but in this area it would apply to all pages.
I don't know of an extension that would selectively turn page styling or off, but look at your extensions.
Both problems could be caused by filters added to "Adblock Plus" extension.
Bring up "Open blockable items [Ctrl+Shift+V]" in ADP by right-clicking on the toolbar/addons bar icon or in the add-on's options. See what is being blocked and the filter that is blocking it. You can easily test filters there and turn them on/off and retest. You can see the filter that is blocking an item, you can use the mouse to see where that filter came from. Choices of what columns to display can be made with the little icon to the right of the column headings in the list.
Attached is a picture of blockable items I see for the www.mobileread.com page. To view a page that you need to view or use, you can try modifying your filters or toggling the "State" column (preferred). You can disable Adblock Plus from the extensions options but that defeats the protection it offers.
If seems that the problem would be an extension, or a style, or theme.

Touch gestures feature stopped working/disappeared two days ago

I use Photoshop CC on a Surface Pro, and actively use touch gestures experimental feature as part of my workflow. Two days ago, the feature all of the sudden stopped working. I went into Settings, and it's no longer even listed under experimental settings, only the screen scaling and the printing features, two instead of the three that should be there.
Is this something that went away with a recent update (I hope not!), or am I dealing with another issue? How do I get it back? This is seriously impairing my workflow.
Thanks for any help!

Seili010 - Adobe has mentioned that the Touch features are now part of the base Photoshop CC 2014 so no need to turn them on.
HOWEVER
I am running the same setup on my Surface Pro 2 (Win 8.1) and my touch features have stopped working as well. I also have a Surface Pro 1 (Win 8.1) that my backup copy of Photoshop CC 2014 is installed on and the touch features work fine.

I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and

hi
I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and Amaisalna something please help

CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311

I have an iPhone 4 and as of two days ago, it just stopped charging.

I have an iPhone 4 and as of two days ago, it just stopped charging. I have tried using multiple different chargers but none seem to work. I don't know whether or not I have a warranty on it or not. What would be the best way to proceed with this issue?
Thank you for your time.

Hi VvanZomeren,
To check your warranty status, find your serial number in Settings > General > About > Serial Number. Then enter it at http://selfsolve.apple.com.
Did you try a different computer/outlet as well as different chargers?

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

I purchased Photoshop Lightroom 5 at Office Depo two days ago. i am following the directions join the card that I purchased. The program will not accept my redemption code.

I purchased Photoshop Lightroom 5 two days ago at Office Depot. I have a redemption code on a card. the program will not take the code. What do I do?

You need to convert your redemption code to a serial number via the Adobe web site.
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.
I recently formatted my computer. In other words, I'm not using too much memory of my HD. My Memory Ram is 8GB.

dandotcraig wrote:
A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
Umm,, no offence... but what is ridiculous... is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
So.. Here's the thing....
LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
Here are just a few ideas to think about.. for around the time this started..
Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
Did you install any new Apps on your Mac?
Did you add a new Hard Drive? How is it formatted?
Did you start recording or creating music in a different way to how you used to before the problem started?
Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
....and maybe a few of the others here will come up with other ideas and suggestions to help you...
Good luck and let us know how you got on...

I purchased an annual subscription to Acrobat Pro XI and installed two days ago. I cannot open PDFs. I keep getting a dialogue box saying my trial has ended and asking if I want to buy the software. Was using Acrobat Pro 9 previously. It appears even that

I purchased an annual subscription to Acrobat Pro XI and installed on my Mac two days ago. I cannot open PDFs. I keep getting a dialogue box saying my trial has ended and asking if I want to buy the software. Was using Acrobat Pro 9 previously. It appears even that won't open. SOS!

Hi Margot ,
You can click on accept or buy ,which ever option you see on that dialog box.It will prompt you to type in your Adobe Credentials.You can license it by doing the same.
If it still doesn't work ,follow these steps and see how it goes .
Delete all the files from following folders:
[Home]/Library/Application Support/Adobe/SLStore
[Home]/Library/Application Support/Adobe/SLCache
And, delete all files from following folder except cache.db
[Home]/Library/Application Support/Adobe/AdobePCD
Then launch Acrobat and try to activate and check.
Regards
Sukrit Dhingra

Sync'd iPhone 5 two days ago, all fine. Plugged in y-day to charge and phone attempted to auto sync...iTunes now says unable to sync bc I need an extra 27GB of storage to copy iTunes Library. I have not made any changes to my settings. Any ideas?

I sync'd iPhone 5 two days ago w/o any issued or problems. Connected phone to iMac for a charge yesterday and iTunes stated an auto sync. iTunes popup box appeared stating phone could not be sync'd b/c I needed an additional 27GB of storage, apparently to load iTunes Library. I did not change or modify any settings. Has anyone experienced this or know how to solve this syncing issue.
Side note: iTunes does recognize that my phone is plugged in, charging. Thank you.

One additional finding this morning ... iTunes can't handle my iPad being connected. Immediately upon recognizing the iPad, iTunes comes up with the same message as happens with the iPod indicating "iTunes has stopped working," forcing an immediate shut down of the program. Opposite the case with my iPod, iTunes at least recognizes my iPad.
No idea. This is madening.

ST03 displays statistics data just for two days ago

Dear All,
I'm a newbie in sap.
In my SAP SOLMAN server, there's no statistical record when I enter STAD for today.
And, inside ST03, last workload records was two days ago.
I've checked that the SAP_COLLECTOR_FOR_PERFMONITOR scheduled per hour and finished successfully. I've also tried to restart the SAPOSCOL, upgrade to the newest SAPOSCOL, but the problem is still occured.
Several days ago, I deleted the Statistic Records using ST03, hope it would refresh the statistics, but the new statistics only created for a few hours, then it stopped, and continued the next two days with old two days data.
How to make this back to normal ?
Any suggestions?
Thank you very much

Hi
Check your client time setting
it is European timing change in India times
through SPRO
it is help out
Regards
Jay

Elctronic whine - I bought it two days ago!

So I bought my black MacBook two days ago. I was so happy to finally have the black version, because my white one suffered from discoloration. However, while I've never had performance issues with my white one, my black one now has started to whine nearly constantly. It's linked to both the display and the power supply. When the the power supply is plugged in, then it utters a high pitched whine. I can turn off the display to stop it, but then I couldn't use the comp when it's plugged in. What do I do?

Since you have had it only two days I suggest you return it for a different one.

Mavericks started crashing on MBP 15 two days ago

Hi! I have a problem with my MacBookPro. It is from around july 2007 and already had its motherboard swapped for the black screen problem a couple of years ago, but it worked fine until this week. Two days ago it started freezing after a couple of minutes every time I login, something between 2 and 12 minutes, more or less. Needless to say that it is completely useless this way. Recovery mode works, I could verify/Repair the Mac partition, but not much else. I also got a Windows 7 Home installed on the machine, and that one works without problems, so I guess it must have been some bug introduced with one or other software actualization lately. I can't really do anything with the machine on OS X anymore, recently it froze two times while I tried to reset the password for my time capsule so I could access the time machine backup from the recovery mode. It also froze while installing the latest security update from safe mode today. 'Froze' means mouse is dead, keyboard is dead, progress bar stops, no reaction apart from forced power down.
Now, as I am writing this from this same machine under Windows, I wonder what is the best way to get OS X up and running again. Is there a way to download an installation image of the OS for, say, Version 10.9.4 with Windows, burn it to disc and restart from there? I don't really see any download option there. Also - would it be worth trying Yosemite instead of a slightly older Mavericks version?

Hi!
Here is the report. I have had two more crashes while operating firefox and Preview with Intego software stopped. This last times the machine did not restart, but just kept displaying the frozen display, even when closing the lid, with no reaction from the mouse or the keyboard apart from forced power down working - with nothing in the log files with a timestamp matching or nearing the clock display.
Problem description:
MacBook Pro running Os X 10.9.5 with Security Update 2014-005 v1.0 installed keeps crashing/restarting with no apparent reason (Re: Mavericks started crashing on MBP 15 two days ago)
EtreCheck version: 2.0.11 (98)
Report generated 30 de noviembre de 2014 20:08:20 GMT+1
Hardware Information: ℹ️
    MacBook Pro (15-inch 2.4/2.2GHz) (Verified)
    MacBook Pro - model: MacBookPro3,1
    1 2.2 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 667 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 667 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    GeForce 8600M GT     - VRAM: 128 MB
        Color LCD 1440 x 900
        SMBX2231 1920 x 1080 @ 60 Hz
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 2:6:17
Disk Information: ℹ️
    WDC WD5000BPVT-22HXZT1 disk0 : (500,11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / [Startup]: 438.49 GB (294.37 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 60.76 GB (19.63 GB free)
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Inc. Built-in iSight
    Apple Inc. Bluetooth USB Host Controller
    Logitech USB Optical Mouse
    Apple Computer Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
    /etc/hosts - Count: 1
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Internet Everywhere.app
    [not loaded]    com.Huawei.driver.HuaweiDataCardDriver (4.0.8) Support
    [not loaded]    com.option.driver.Option72 (2.17.0) Support
    [not loaded]    com.option.driver.OptionHS (3.28.0) Support
    [not loaded]    com.option.driver.OptionMSD (1.21.0) Support
    [not loaded]    com.option.driver.OptionQC (1.11.0) Support
        /Applications/Toast 8 Titanium/Toast Titanium.app
    [not loaded]    com.roxio.BluRaySupport (1.1.6) Support
    [not loaded]    com.roxio.TDIXController (1.7) Support
        /System/Library/Extensions
    [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.2) Support
    [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.2) Support
    [not loaded]    com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
    [not loaded]    com.prolific.driver.PL2303 (1.0.8b4) Support
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
    [not loaded]    com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
    [not loaded]    com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Startup Items: ℹ️
    MySQLCOM: Path: /Library/StartupItems/MySQLCOM
    XiMetaNDASService: Path: /Library/StartupItems/XiMetaNDASService
    XiMetaNetLpx: Path: /Library/StartupItems/XiMetaNetLpx
    Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
    [running]    com.paragon.NTFS.notify.plist Support
Launch Agents: ℹ️
    [running]    com.bjango.istatmenusagent.plist Support
    [running]    com.bjango.istatmenusnotifications.plist Support
    [running]    com.intego.commonservices.integomenu.plist Support
    [loaded]    com.intego.commonservices.taskmanager.plist Support
    [loaded]    com.intego.commonservices.uninstaller.plist Support
    [loaded]    com.intego.netbarrier.alert.plist Support
    [running]    com.intego.netupdate.agent.plist Support
    [loaded]    com.intego.virusbarrier.alert.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [loaded]    com.paragon.updater.plist Support
    [loaded]    org.freedesktop.dbus-session.plist Support
    [loaded]    org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.bjango.istatmenusdaemon.plist Support
    [running]    com.intego.commonservices.daemon.integod.plist Support
    [running]    com.intego.commonservices.daemon.taskmanager.plist Support
    [loaded]    com.intego.commonservices.icalserver.plist Support
    [failed]    com.intego.commonservices.metrics.kschecker.plist Support
    [running]    com.intego.netbarrier.daemon.logger.plist Support
    [running]    com.intego.netbarrier.daemon.monitor.plist Support
    [running]    com.intego.netbarrier.daemon.plist Support
    [running]    com.intego.netupdate.daemon.plist Support
    [loaded]    com.intego.virusbarrier.daemon.emlparser.plist Support
    [loaded]    com.intego.virusbarrier.daemon.logger.plist Support
    [running]    com.intego.virusbarrier.daemon.plist Support
    [loaded]    com.intego.virusbarrier.daemon.scanner.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [loaded]    com.soma-zone.LaunchControl.Helper.plist Support
    [invalid?]    org.freedesktop.avahi-daemon.plist Support
    [invalid?]    org.freedesktop.avahi-dnsconfd.plist Support
    [not loaded]    org.freedesktop.dbus-system.plist Support
    [loaded]    org.macosforge.xquartz.privileged_startx.plist Support
    [not loaded]    org.macports.apache2.plist Support
    [invalid?]    org.macports.OpenSSH.plist Support
    [invalid?]    org.macports.postgresql80-server.plist Support
    [running]    org.macports.Privoxy.plist Support
    [not loaded]    org.macports.slapd.plist Support
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist Support
    [not loaded]    Internet Everywhere Support
User Login Items: ℹ️
    iTunesHelper    UNKNOWNHidden (missing value)
    iTunesHelper    UNKNOWNHidden (missing value)
    GrowlMenu    UNKNOWN (missing value)
    KiesAgent    AplicaciónHidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
    fuspredownloader    AplicaciónHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
    CoolirisWebKitPlugin: Version: (null) Support
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    AdobePDFViewer: Version: 8.1.0 Support
    Default Browser: Version: 537 - SDK 10.9
    QuickTime Plugin: Version: 7.7.3
    RealPlayer Plugin: Version: (null) Support
    Scorch: Version: 5.2.5 Support
    JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
    AdBlock
    DuckDuckGo
    Firebug Lite for Safari
3rd Party Preference Panes: ℹ️
    Flash Player Support
    Java Support
    MacFUSE Support
    MySQL Support
    Paragon NTFS for Mac ® OS X Support
    SANE Support
    PrintOptionPane Support
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Destinations:
        Data [Network]
        Total size: 998.06 GB
        Total number of backups: 130
        Oldest backup: 2010-06-17 22:26:58 +0000
        Last backup: 2014-11-30 18:52:44 +0000
        Size of backup disk: Excellent
            Backup size 998.06 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
        10%    WindowServer
         1%    firefox
         1%    fontd
         0%    iStatMenusDaemon
         0%    SystemUIServer
Top Processes by Memory: ℹ️
    322 MB    firefox
    150 MB    com.apple.IconServicesAgent
    107 MB    SystemUIServer
    107 MB    Xcode
    94 MB    iStatMenusDaemon
Virtual Memory Information: ℹ️
    1.34 GB    Free RAM
    1.76 GB    Active RAM
    529 MB    Inactive RAM
    660 MB    Wired RAM
    551 MB    Page-ins
    0 B    Page-outs

Please help! My iPad isn't downloading any apps. When I try to down load a free app it prompts me too update my billing info. I update my billing info and it say invalid! It just starting doing this about two days ago . Can some one help! Thx

My ipad2 isn't allowing me to download any apps. When I try to download a app it prompts me too update my billing info. I did that and it said invalid security code for my credit card. It just started this two days ago, before I had no problems. Please help my apple friends

See Here > http://support.apple.com/kb/TS1646

Two days ago, Skype stopped accepting 1.800 toll f...

Similar Messages

Maybe you are looking for