Two DBConnection_OLAP sources for one ETL

I have a requirement to pull information from two different EBS instances. I have created the two data sources in the physical tab and when creating the Execution plan, and generating the parameters, it prompts for "how many number of copies"
Has anyone tried this option for two copies and does it mean that it will run the ETL by pulling information from two EBS sources and put them in the same target datawarehouse.
Thank you
Nilesh
http://www.appsbi.com

Hello,
Yes, you are correct the 6036E E-series card does not support the Arm Start Triggering, but the M series cards do support this feature.  For the future possibility of an M series card, I would suggest using the two counters with the arm start trigger. 
As for the E series card, I was a little confused about the setup you are describing.  You mentioned that you wanted to use the two pulses (the 1 Hz GPS and the 100 Hz IMU) to be the same external sample clock for one counter (counter 0).  However, later in the same post you mentioned wanting to use the two pulses as two different gates.  I am going to assume that you want to use the two pulses as gates on the same counter in-order to have them share the same 100 KHz source.  Then your question was how to differential in-between the two measurement, since you want to use an OR gate.
The problem is that whether you are using this setup (one counter) or utilizing two counter that share the same 100 KHz source on the E series … you still are not addressing the fact that the two inputs (1 Hz GPS and 100 Hz IMU) are not synchronized.  This will result in an offset signals and your measurements will not be reliable.  Thus the differential question is not as relevant
I would suggest using Buffered Period Measurements with a M series card for this application.  However, I do realize that in the end you might be trying to find a quick solution with the E series card.  For this, I would suggest taking the GPS out of the picture and just input the fluctuating 100 Hz signal.  With this setup you explore software monitoring options.
I have included links to articles about counters and Buffered Period Measurements.
Period Measurement with a Counter
Measure Buffered Pulse-Period on 2 Counters Simultaneously (DAQ-STC)
Samantha
National Instruments
Applications Engineer

Similar Messages

  • Accessing two data sources in one method

    I wanted to access two connection pools in one EJB project. I manage to create two connection pools in weblogic server and I successfully wrote the lookup code. I wanted to call these two data sources in one method. But it only gives result from one data source connection. other is null. Im getting following message also
    Connection has already been created in this tx context for pool named jdbc_informix_pool. Illegal attempt to create connection from another pool: JDBC_informix_webdata
    "jdbc_informix_pool" and "JDBC_informix_webdata" is the names of my connection pools. the two data sources works perfectly when they are accessed separately. but whenever im tryng to call two data sources in one method it retrive data from only one data source and gives me above message.
    anyone know how to fix it.?
    thnx
    sameera

    hi...
    thnx man.. it worked. But there is another problem. I cant close my data source connection. whenever im tryng to close it, it says
    Result set already closed
    i manage to run my program without closing the data source connection. but after a while it says
    No resources currently available in pool JDBC_informix_webdata to allocate to applications, please increase the size of the pool and retry
    i can increase the size of the pool and run my program. but i guess if I close the data source connection this will be resolved. But how can I close my data source connection. I tried finally clause. but it gives me the result set already closed message
    how can i do it.?
    thnx
    sameera
    Edited by: Sameera on Jun 18, 2009 8:35 PM
    Edited by: Sameera on Jun 18, 2009 8:40 PM

  • Can you have two iCloud accounts for one Apple id?

    Can you have two iCloud accounts for one Apple id?

    the appleID is you in the ios world if you have an iphone and an ipad and an Ipod touch and an appletv and a mac then you should use 1 appleID on all of them it does not mean the same data is on all of them unless you want it to be

  • Bank Transfer file: generate two outgoing files for one pmt method?

    Hello Experts,
    Two files (header and item) are expected from the hungarian bank for each payement.
    It's possible to generate two outgoing files for one pmt method using DMEE tree? If yes, can you tell me how?
    If not, there is an other solution? Use a classic program (copy and adaptation) for example?
    Thank you in advance.
    Amal

    Are you sure you need separate files file header and items.
    Usually both header and items are placed in the same file. Please reconfirm or get the formats from the Bank.

  • To enter two VAT numbers for one vendor in the same country

    Hello All,
    When we try to enter two VAT numbers for one vendor in the master record and belongs to the same country, the system is not allowing and gives the following message,
    "VAT reg.no. already exists for country BE"
    Message no. F2140
    Kkindly let me know the way to proceed further.
    Many thanks in advance.

    Hello,
    Go to OBA5 and switch off the message for online and batch entries.
    If the message is already not there in OBA5,
    Then go to OBMSG and switch off the same.
    Application Area F2
    Message No.140
    Regards,
    Ravi

  • Import Two Price Lists for one item

    Hi all,
    How we can import two price lits for one item and how to link it.
    For eg.
    Suppose Item A is having price 100 Rs today at 11 am
    and its price changes to 150 RS at 1 Pm.
    how we can do this.
    We also want to see the last price of that item.
    Reply
    Thanks,
    Neetu

    Neetu,
    What do you mean by changing?  Does the Item price flactuate throughout the day every day..if so you need to create a routine to import/update the pricelist constantly.
    If the 11 am and 1 pm are constant times when the prices change then you can maintain a pricelist for each one of them.
    Shooting for a solution without knowing the business background can be a bit wasteful.  If you might want to throw some light on the type of business and what the prices are for..
    I also see you have posted the same question earlier..Price Updation
    I would suggest that you post only one thread for one question.

  • Two item renderer for one datagrid column?

    hi
    i have one doubt
    can we use two item renderer for one datagrid column
    any possibilities
    why i am asking this because
    during drag and drop i need one itemrenderer and during application initialization i need another itemrenderer
    any possibilities
    karthik.k

    Hi,
    I think your requirement can be completed by using ViewStack you can pass selected index to it according to requirement.
    See:
    <itemRenederer ...
         <viewstack selectedIndex = 0 ...>
              <vBox id="vBox1" >
                        Your 1st itemrenderer will come here....
              </vBox>
              <vBox id="vBox2" >
                        Your 2nd itemrenderer will come here....
              </vBox>
         </viewStack>
    </itemRenederer>
    You have to just toggle selectedIndex.
    Thanks

  • Two data sources to One Infosource?

    HI GURUS
    Can we connect Two data sources to One Infosource?
    Regards
    Durai

    Hi Expert !
    Thanks
    If we assigned two data sources to an Infosource, all those fields will be availabe in the transfer rule maintanence screen that we can choose and assign to Infosource infoobjects.
    Am I correct?
    Regards
    Durai

  • Two Mobile Server for one Backend ?

    Hi,
    we need two Mobile Server. One for internal access and one for external access.
    Is it possible to have two Mobil Servers for one backend system and can I sync all the config between this two servers ?
    Regards,
    Gerald

    Hi
    Yes, you can mirror on the hardware,DB and OS level.
    This is not possible with your mobile server.
    <i><b>One for internal access and one for external access</b></i>
    For external access you can expose one of the IP's as a static IP and for internal Access you dont need to expose it.
    If you are planning to have two Servers then you will have to get as many licenses from SAP.
    PS: reward points for helpful answers
    Regards
    Arun

  • Can we make two shipment cost for one outbound delivery

    Hi team,
    Can we make two shipment cost for one outbound delivery?
    Need your suggesstions.
    Regards
    Venkat Ramana

    Hi
    I do not think that you will get a reply now as it has been too long.
    Maybe the answer is not known.
    However as the forum is growing and it takes so much time to get through all of the pages it would be nice to keep it current so could you please close your thread and either re-open a new one (this might help as people are more likely to look at curret ones) or try another forum.
    This will make life easier for everyone
    Regards
    Frenchy.

  • Two deliveries required for one sales order

    Hello Friends,
    I have a quirey , I have two types of goods in one sales order, one is dangerous goods and other one is normal. How ever we are thinking to make two seperate deliveries even they are in one sales order. How can two diff deliveries gets created.
    We are planning to create new shipping point with new loading group for the dangerous goods .
    Will the above decision works or is there any simplest way to create two auto deliverys for one sales order.
    Reg.

    Hi all,
    I have yet another proposal - using copy control and adding there dangerous goods profile LIPS-PROFL as split criterial. This field is populated originally from material master MARA-PROFL field.  You can check for example routine FV50C201. Split criteria are defined in likp-zukrl field.
    I think that is better solution then introducing new shipping point. Because there are some determinations and dependencies related to shipping points. So the more shipping points you have, the more additional config you have. If it is needed by business to have separate shipping points - then fine. But if the goods are shipped from the same place, then I would rather modify copy control instead of multiplying config and master data. I say duplicated effort in master data - because with 2 shippiong points you would need to maintain DG profile field and additionally loading group.
    Kind regards
    Witek Prawecki.

  • Suprisingly two Processes running for one database

    Hi all,
    Today morning in one of our database servers, we see two processes running for one database.
    COBLpo05 11949 1187 0 Mar 25 ? 37:50 ora_smon_BLINDEA1
    COBLpo05 7789 1187 0 Mar 25 ? 5:35 ora_smon_BLINDEA1
    Can anybody suggest me what is the reason behind it and what to do in this case?
    Thanks in Advance.

    The ORACLE_HOME may have been set twice with differents values in it (i.e. extra slash) before starting twice the same db.
    Please, have a look to this article from Ivan Kartik :
    http://ivan.kartik.sk/index.php?show_article=40
    And depending of your OS, you could check what ORACLE_HOME is used for each process :
    How to Check the Environment Variables for an Oracle Process*
    Doc ID:  373303.1*
    Nicolas.
    added the metalink note ref.
    Edited by: N. Gasparotto on Sep 4, 2009 11:34 AM

  • I get two message threads for one contact. One for sms and one for iMessage since I updated to iOS 7. How can I get them both into one thread?

    Ever since I upgraded to iOS7 just two of my contacts I get two message threads for them. One containing their iMessages to me and the other with just regular sms messages. In Contacs, their email and phone number are saved under one name. How can I get the iMessages and sms to come through under one thread in my messaging app again?

    I am having this trouble also, my partner creates a new message to send to me, or sends a picture and it always comes through as an MMS and not using iMessage ...
    will try deleting everything and starting again!

  • How do you create two apple ids for one email address.

    I bought two i pads for my kids. Since we have just one email address, everytime I try to create a new apple id it says I already have one. They need separate ids so their friends can facetime with one and not the other. Can't figure out how to create two apple ids with one email address.

    Donnathemom wrote:
    Well any ideas on how to solve this problem? When my daughter does facetime with someone it says she's Wyatt. She's not real happy about that. 
    Get her an email address, even if she never uses it.  They're free and available almost everywhere.  The only requirement is that the address be a valid one.
    Edit...
    You can even use an "alias" of yours.  That's a fake address that actually sends everything to you.  Check with your current email supplier.

  • HT204053 two apple id for one iCloud account

    Is it possible to assign two Apple IDs to one iCloud account?  I don't want to have separate ones for my wife and I...
    Thanks,
    John

    No, each account requires its own Apple ID. Why is it that you do not wish to have separate iCloud accounts, this is generally the best way of doing things.

Maybe you are looking for