Two dbua sessions at a time

Hi ,
one quick question...
can we run two dbua sessions at a time(from diff boxes) to upgrade two diff databases of same version to 11.1.0.7 version?
Regards,
Raj
Edited by: fortheppl on Jun 14, 2010 3:45 AM

yes, you can

Similar Messages

  • Can you move files between two different user accounts in Time Capsule?

    I copied a bunch of stuff from my old NAS (which used FAT) to Time Capsule under one user account... I then reformatted the NAS to HFS+ so I could just use it as a USB drive connected to the TC. Now I realized that I want to have one of those folders in another user directory. I cannot open two different sessions of the TC on the computer...at least I have not figured out how to do this. Is there a way to accomplish this without copying the folder to my computer, then copying it back to the other user directory? It is several gigs.

    you can crop files from one account to another using the Public Dropbox which every user account has.  Log into the user that has the files you want to move, then drag the folder you want to the new users' dropbox:
    I suggest a small scale test on a few files first before moving gigabytes of files.

  • Updating two tables at the same time

    Please,
    Does someone have an idea on how to update two tables at the same times?
    Thanks a lot in advance

    I was thinking about a single session and single update command.
    That's why I thougth someone else could have a clue.
    Thank you

  • Will a sequence return same value for two different sessions?

    Is there a possibility that a sequence will return same value to two different sessions when it is referred exactly at the same instance of time?

    @Justin... Thanks for your insight; indeed, we too feel this shouldn't ever happen and never heard of it either, but there it is. (No, we haven't logged a TAR yet -- whatever that is -- partly because it didn't occur to us and partly because we only recently came across the issue and sensibly want to do some testing before we cry foul.)
    However, the code is pretty straight-forward, much like this (inside a FOR EACH ROW trigger body):
    SELECT <seqname>.NEXTVAL INTO <keyvar> FROM DUAL;
    INSERT INTO <tblname> (<keyfield>, <... some other fields>)
    VALUES(<keyvar>, <... some other values> );
    (where <tblname> is NOT the table on which the trigger is fired). This is the only place where the sequence is ever accessed. The sequence state is way below its limits (either MAXVALUE or <keyfield>/<keyvar> datatype size).
    In this setup, end users sometimes got an out-of-the-blue SQL error to the effect that uniqueness constraint has been violated -- as I said, we used to have a unique index on <keyfield> -- which leads us to assume that the sequence generated a duplicate key (only way for the constraint to be violated, AFAIK). We released the constraint and indeed, using a simple SELECT <keyfield>, COUNT(*) FROM <tblname> GROUP BY <keyfield> HAVING COUNT(*)>1 got us some results.
    Unfortunately, the <tblname> table gets regularly purged by a consumer process so it's hard to trace; now we created a logger trigger, on <tblname> this time, which tracks cases of duplicate <keyfield> inserts... We'll see how it goes.
    @Laurent... winks at the CYCLE thing Our sequence is (needless to say) declared as NOCYCLE and the datatype is large enough to hold MAXVALUE.

  • How to pass data between two internal sessions using ABAP memory?

    Hi,
    How to pass data between two internal sessions using ABAP memory?
    It would be fine if you could explain with an example.
    And also let me clear about the data passing between two main sessions and two external sessions with specific examples.
    Thanks.

    Hi ,
      check the example.
    Reading Data Objects from Memory
    To read data objects from ABAP memory into an ABAP program, use the following statement:
    Syntax
    IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
    This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
    You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
    In this statement, the system does not check whether the structure of the object in memory is compatible with the structure into which you are reading it. The data is transported bit by bit. If the structures are incompatible, the data in the target field may be incorrect.
    PROGRAM SAPMZTS1.
    DATA TEXT1(10) VALUE 'Exporting'.
    DATA ITAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
    DO 5 TIMES.
      ITAB-BOOKID = 100 + SY-INDEX.
      APPEND ITAB.
    ENDDO.
    EXPORT TEXT1
           TEXT2 FROM 'Literal'
      TO MEMORY ID 'text'.
    EXPORT ITAB
      TO MEMORY ID 'table'.
    SUBMIT SAPMZTS2 AND RETURN.
    SUBMIT SAPMZTS3.
    The first part of this program is the same as the example in the section Saving Data Objects in Memory. In the example, the programs SAPMZTS1 and SAPMZTS2 are called using SUBMIT. You can create and maintain the programs called using the SUBMIT statement by double-clicking their names in the statement. For further information about the SUBMIT statement, refer to Calling Executable Programs (Reports)
    Example for SAPMZTS2:
    PROGRAM SAPMZTS2.
    DATA: TEXT1(10),
          TEXT3 LIKE TEXT1 VALUE 'Initial'.
    IMPORT TEXT3 FROM MEMORY ID 'text'.
    WRITE: / SY-SUBRC, TEXT3.
    IMPORT TEXT2 TO TEXT1 FROM MEMORY ID 'text'.
    WRITE: / SY-SUBRC, TEXT1.
    Example for SAPMZTS3:
    PROGRAM SAPMZTS3.
    DATA JTAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
    IMPORT ITAB TO JTAB FROM MEMORY ID 'table'.
    LOOP AT JTAB.
      WRITE / JTAB-BOOKID.
    ENDLOOP.
    The output is displayed on two successive screens. It looks like this:
    and
    The program SAPMZTS2 attempts to read a data object TEXT3 from the data cluster "text", which does not exist. TEXT3 therefore remains unchanged. The existing data object TEXT2 is placed in TEXT1. In both cases, SY-SUBRC is 0, since the cluster "text" contains data.
    The program SAPMZTS3 reads the internal table ITAB from the cluster "table" into the internal table JTAB. Both tables have the same structure, namely that of the ABAP Dictionary table SBOOK.
    Pls. reward if useful.....

  • Write a progarm to test two parts at the same time

    Hi:
    I need to write a program in LabView that is capable of testing two parts at the same time.
    Explanation:
    I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
    I am using LabView 2012

    From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
    www.ni.com/teststand
    Ryan
    Ryan
    Applications Engineer
    National Instruments

  • Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

    Can I show two angles at the same time in the final edit rather than alternate with Multicam?

    Stack two clips on top of each other and reduce the sizes. I think that's what you want.

  • Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this

    Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this?

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • One again, "can I use CC on two computers at the same time?" - in practice.

    I know this has been asked before and all those threads are locked. Many asked the question, but I haven't found a satisfying answer yet.
    Can I multi task with CC?
    I want to have my laptop next to my desktop. And while I render, export or whatever my newly shot documentary on the laptop I want to work with a music video project on my desktop. Then when the render is finished I render the music video and go back to the laptop and continue on the documentary. Or maybe I just work 5 minutes on the desktop music video, then come up with something brilliant for the project on the laptop and switch. Back and forth. Will that kind of activity result in any kind of limitation, usage-wise?
    So, working on Premiere on my two computers at the same time.. is it possible? Technically? I know the EULA says "only one person". But will it let one person mutli task?
    I need to know this before I buy. sorry for asking this again, please bless me with a clear answer

    Hi Jimmy Crim,
    Yes in case of Creative cloud subscription you are allowed to install and use the cc apps in any two machines.
    Even if you want you care allowed to use these apps together in both the machines.
    Thanks
    Kapil

  • Can I access two websites at the same time?

    Does Dreamweaver have the ability to open two websites at the same time?
    I basically have a CMS hosted on one server, that connects to my clients sites on other servers. I want to be able to open files on one server and edit them and also edit files on another server at the same time.
    If this isn't available in Dreamweaver, then I think it should be. I often need to copy code from one page in a site to another page in different site. To have the ability to have two windows open, each connected to a different website server would be invaluable to me. By having separate windows, each can have its own server connection. I don't know how easy that would be, but I'd love it!
    Cheers
    Glynn

    You can only connect to one site at a time.  And you need to edit files locally, save & then upload to the remote server.   AFAIK, no single FTP app is capable of connecting to more than one server at a time.  You might be able to do what you want with DW open and an additional 3rd party FTP client like Filezilla, each connecting to different servers.
    Nancy O.

  • How can I open two libraries at the same time on itunes?

    Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

    Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
    tt2

  • How can I start two Vi at the same time?

     I have two Vi's, each of these Vi has a stop button. I want to start these two Vis at the same time. I also want to be able to stop the two Vis at the same time. What should I do? Thanks.

    One way to start them is with an Invoke Node and the Run method. You can then stop them with the Set Control Value [Variant] method. When you use the Set Control Value [Variant], you just have to specify the name of the front panel control that stops the while loop. Older versions of LabVIEW only had the Set Control Value method in which you had to use the flatten to string function to pass the Type Descriptor and Flattened Data.
    Message Edited by Dennis Knutson on 03-20-200609:35 AM
    Attachments:
    Run Method.JPG ‏44 KB

  • Since I upgraded Firefox, I cannot open more than 1 session at a time. What can I do to correct the problem?

    Since I updated Firefox, I can no longer open more than 1 session at a time. How can I correct the problem?
    == This happened ==
    Every time Firefox opened
    == Since last upgrade

    Firefox only runs one session at a time, are you talking about not being able to open a 2nd window?
    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

    I have been unable to log into my Actiontec MI424WR router this week, The router returns the message "No more than 1 sessions at a time are allowed. Please wait until open sessions expire." every time I try to log in. This has been going on for days.  Even pulling the power to reboot it did no change.  I'm the only user in the household that would log into it, so I don't understand how this could occur.  How can I get in?
    GLN2

    I really don't want to do a hard reset as I have a handful of custon port forwarding rules that I had created. I'm not a wiz at that, so it would take me too much time to re-create!  I may have no choice. Next time I can get in I will try the backup of the config file. I hope it contains the port forwarding rules.
    The backup function should work fine, I have used it to save my Steam port  forward rules to my hard drive, after a pin hole reset I was able to restore successfully. I did configure mine to 1 session & ALWAYS   logout when I am done.  I have never had any problems logging into the router. But in your case you may need more than 1 session allowed.
    Are you using a native or 3rd party app to remember your router ID/password? IF you are do not do this, you are "defeating" the built in security of the router
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • How to load data from a flat file to two different tables at a time.

    I am not aware of Sql Loader so Please any body suggest me that is there any way to load data from excel sheet to two different tables at a time its very urgent.
    with regards,
    Srinivas.R

    Read Utilities Guide from the Oracle Documentation Library. See
    <br>
    Oracle Database FAQs
    </br>

Maybe you are looking for