Two different areas on my fcp x project are having difficulty rendering

It is taking hours to render two video portions of a 7 minute project I have done. It's only at 22% and it has already been 45 minutes.
I have tried to see if the project would export (as media) and it always stops at this point in the video (about 59% in) and then fcpx crashes.
(computer says: fcp closes unexpectedly)
Its an anniversary project due tomorrow. Hoping to export to a DVD!

That's great.
This is just an amateur's speculation, but it seems like some part of the code in 10.0.5 was changed or tightened up so that an iffy font, image, Motion project, video file, etc is no longer tollerated by Final Cut and causes the apparently random crashes various users have run into.
Perhaps someone with a more intimate understand of how Final Cut works can set me straight.
Ross Hunter

Similar Messages

How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

mpcsouza wrote:
How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?
you can't, GB is restricted to a single time signature per project
however, the time sig is really more cosmetic, it doesn't affect the way the project plays back, so you could set the project to 2/4 when working on the 2/4 parts, and 3/4 when working on the 3/4 parts

Diversity and trying to conver two different areas

So the whole purpose of diversity is to provide/improve coverage in a same area. Basically two antennas placed with a reasonable distance from each other and the concept is that one antenna might receive a better signal than other and then both signals can be combined to get a single stream. End result better communication.
Now something I have noticed that people are doing is taking the two antennas and putting them like 25 to 50 feet apart with diversity enabled trying to cover two different areas. At times two different rooms so like one antenna is in one room and second one is in another room with a concrete wall between them. Apparently they are saying that it is working for them. I'm trying to understand the logic behind that how something like that wouldn't cause issues unless they have clients only on one side?

I've seen set-ups like this before and people at the site can (and will) say that it's "working".
Until I get a wireless sniffer out or do some scanning, it seldom works. They will say that it's working purely for political (don't want to get themselves into trouble) and/or financial (they can't afford to put two APs) or both.
This may work (somewhat) in 802.11a/b/g but stick 802.11n/ac and I'm certain it won't work. When I mean it won't work, I mean you won't see the full benefit of connection speeds of >155 Mbps.

My mac book gives electric shock through its entire body while being charged from AC out let. is there a solution to the problem? my other two friends are haveing the same problem who recently have purchased the same note books, its weird for APPLE

My mac book gives electric shock through its entire body while being charged from AC out let. is there a solution to the problem? my other two friends are haveing the same problem who recently have purchased the same note books, its weird for APPLE products. Please give any solution.

Is the MBP properly grounded? Are you using the three prong plug? If not, do so and your problems may disappear. If not, do what SwankPeRFection suggests.
Ciao.

TS1398 Since upgrading to ios6, all apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device. It's an ios

Since upgrading to ios6, all the family's apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device and we have to reconnect through settings. This appears to be an ios6 software issue.
Is there a solution to this wifi connection issue or do we wait for a software fix?
I'd hate to think Apple is going down the Microsoft path, of passing untested software onto the user. What ever happened to Regression Testing, to ensure the existing functionality remains intact?
I bought into the Apple dream, because it was intuitive, reliable & enjoyable to use, all the things that Microsoft windows isn't.
Other issues we are experiencing are, Games are stuttering and the kids really miss the old YouTube app.
Please Mr Browett, sort these issues out.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
~~~~~~~~~~~~~~~~
YouTube is not now part of iOS 6.
However, you can go to the App Store and do a search using YouTube. You can download several YouTube apps: YouTube (for the iPhone, a IPad app is in work), several users like Jasmine and YouPlayer.
 Cheers, Tom

My clients are having difficulty reading PDF contents

When I upload PDF on my site Apple Repair Club - Midtown Manhattan, NY - (800) 521-6181, my clients can not read using Adobe PDF Reader. I am having difficulty in posting web instructions on posts or pages. Now, I'm using plain text posting rather than PDF. The purpose of PDF files directory in posts is that I can manage 100s of them in a single page and this is quite easy to browse and download when necessary. Not being able to view PDF on site pages or posts is an inherited domain or hosting issue or the issue of PDF reader - I'm kind of not sure about it. When I talk to the hosting provider, I'm assured that it should not be the issue at the hosting end. When I upload contents, I can view from Safari 7.1.3, Chrome 41.0.2272.89 and Firefox 36.0.3. I'm a Mac user and have not tested from IE. When clients browse, they are thrown error that the contents are corrupted or not available. I have not investigated clients' browser versions though. Is this because of the non-supported browsers? Or an issue seen somewhere else as well? I didn't find trending concerns on such issues on the forum. Any instructions or advise is highly appreciated.

I was able to subscribe in iTunes and download the episodes perfectly well. However the connection is quite slow. It took over two minute to download each episode - they are only around 8Mb each so it should only have taken a few seconds.
Similarly when I checked the feed in Firefox there was a delay of some seconds before it loaded. My own connection is 100Mb/s so it's not me!
It looks as if the GoDaddy server may be rather slow to respond sometimes - either that or something in the connection from there - and possibly it's sometimes slow enough to time out iTunes.

Can two different account work on the same project?

I work for a non-profit organization and we are think about switching platform for our website, we are looking in to Muse, our graphic designer already have a Adobe Muse account and we would like to get an other account for the organization, will it be possible for both our account to work on the same project? With an account we can only have two computer with Muse and there will be 3 working on the website.

Hi Alexandre,
At any given point not more than one person can work on a .muse file. Muse is not yet designed for a workflow like this. You can update the .muse file using three different accounts as long as the file is not opened at more than one end at the same time and the file needs to be shared manually in between the accounts once one person is done working on it.
- Abhishek Maurya

Importing two different video sources into FCP

I have captured footage from a Sony HDV 1080i using iMovie HD and imported it into FCP. I also have footage captured in DV-NTSC 720x480 format. I would like to use both formats in a video clip. However, whenever I import Sony 1080i footage into the timeline it needs to be rendered and it takes a fair amount of time. Is there anything I can do to the footage so that it does not need to be rendered everytime I drop it into the timeline?

You have to elect which timeline you want, HDV or NTSC DV. Either one must be rendered.
You might try a recapture of the HDV and downconvert it in the camera on capture.
Settings are in the manual
david

How do I enable opening firefox from two different computers sharing the same home directory without having to delete a lock file (linux).

I just don't want to have to delete a lock file - which has a purpose - in order to use firefox simultaneously from two locations on the network - where the home directory, i.e. .mozilla directory - is located

You need to use two separate profiles if you want to have two Firefox instances open at the same time.
See also http://www.mozilla.org/unix/remote.html

"We are having difficulty downloading episodes from your feed" error message

This is my feed:
http://thebachelorsofdice.wordpress.com/feed/
What am I doing wrong?

Your image tags are all irrelevant. The only image tag iTunes looks at is the 'itunes:image' tag which you don't have - and which it can't read without the 'iTunes declaration' in the second line. Without this tag there will be no image in the Store.
As said, you need to do something in WordPress to make the feed itunes:compliant.
When you post an image for iTunes it should be 1400 x 1400 (the '600 x 600 info is out of date), and it must be a JPG or PNG and less than 500kB.

How to create Analysis from two different subject areas with diff models

Hello,
I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
whether it is possible to do in OBIEE?
Please help me
Kind regard
robix

Hi
One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
But if you indeed interested in UNION (or intersect) queries, then do this:
Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
That should give you a start.
http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
Award Points it is useful.
Thanks
satya

How to work with two different backend with same MI Server and war file

Hi All,
We have a requirement that we need to work with one Middleware for two backends. For that we had to copy MAM30 sync bo's to zsync BO'S with the name ZMAM30. Now both sync BO'S will point to different backends.
I have a standard war file which was working well with standards sync bo's. Now to work on zsync bo's what all the changes do I have to do in the standard war file(code).
As per my knowledge we have a file called "syncbonamelist.properties" which maps the sync bo keys. Also there is another file called "mapping.xml" file which maps the package name with BO name.
Can any body please tell me, are there any other files needed to be change like "meRepMeta.xml", other than any existing code like java objects are also needed to be changed.
Your help in this regard is highly appreciable.
Regards
Murthy

Hi Murthy,
I try to get my head around the question:WHY?
The reason for my question is, that this influences the answer!
Because of several reasons it is NOT possible to handle MAM and zMAM Bos at the SAME TIME on the SAME MACHINE in the way you describe it - and it makes no sence to do so at all! But anyway......
Lets say you have two backends, cause you have two different areas of the company. But both want to use the same MI server - but the client should be independend.
So you need two apps. One uses the MAM BOs and the second one uses the zMAMBos.
If this is the case, dev should be straight forward I think and you solution should work already......... so I ask myself, what is the problem you have? Do you get an error?
- First create a new MEREPMETA-XML with just the zMAMBOs instead of the MAM BOs.
- Change the two files you mentioned above.
This should be all then.
If you have a look into the implementation for MAM001Impl for example, there you find a line like:
private static final String SYNC_BO_NAME
= ResourceBundle.getBundle("com.sap.mbs.mam.bo.impl.syncbonamelist").getString("MAM30_040");
This takes the name from the properties file and maps it to the real BO. So changing the name in the property file to
MAM30_040 = zMAM30_040
will result in MAM uses the zMAM BOs.
Be aware: after you place the WAR file in the WEBAPPS folder and do a restart to deploy the file, you need to do a data reset to make sure the new MEREPMETA.XML is read.
AND: two apps! one for MAM and one for zMAM BOs. One APP is not possible! Cause if you have something like that in the properties file:
MAM30_040 = MAM30_040
MAM30_040 = zMAM30_040
if will only take the first reading.
But I think this is clear to you anyway
Regards,
Oliver

Can i have the same application in two different oc4j containers?

Hi,
I have developed one J2EE application and still the updation is going on. So i wanted to to deploy the application in two different oc4j containers. so that one will be having the working version of my application and the users can use that application. I want to use the second container as my test application, in that i can modify and test. The deployment of my application in two different containers went fine. But when i try to access the web application with the context, it is serving from the latest deployment for my request.
My question is :
1) Can i use both applications with different Oracle HTTP server port numbers??
2) All the HTTP requests are passed to the oc4j containers by AJP13 protocol through AJP port to the OC4J containers. where is the mapping between the OHS and AJP protocol defined ??? ie., the requests from this http port have to be transferred by AJP protocol through AJP port to this OC4J container ???
3) Or i have to have two different installations of Oracle9iAS ???
Please help me to solve my issues...
Robert D

Different ohs port numbers would not help as there is only 1
$iashome/Apache/Apache/conf/mod_oc4j.conf
You can pick a different context_root name for your test app.
Ken

Smart forms--In different pages i require two different main windows

In one smartform, I am having two pages. and two pages are having different formats
First page will print repeatedly till the completion of main window1.
Now i want to add another main window(2) to second page, it will also should print repeatedly till the completeion of main window(2).
But in first page main window contains 5 coloumns with subtotal
in second page main window contains 3 columns without subtotal
Both main windows are using same internal table.
can anybody help me in this issue.
If i copy first page main window into second page as main window with diferrent name, then it is showing blank window with out any text why?
pls hepl me
Madhavi T

Try to do it like this, separate the data in internal table to two different tables, since data should be printed on two different formats...
Design two page in your smartform according to the requirment. now goto first page and set the next page as FIRST
now goto second page that you have created and set the next page as SECOND.
loop the first internal table in first page and once all the entries are finished, try to goto second page for doing this place command and tick the check box in command, goto next page and select the page as Second...
I guess this will solve your issue.
close the thread once your question is answered.
Regards,
SaiRam

Just bought a Canon Rebel T2i as a gift, not out of box yet. Called apple before I bought it and they said it's compatible with iMovie 11. Reading comments that people are having a difficult time getting iMovie to read files. Any comments?

Just bought a canon rebel t2i as a gift, not out of box yet. Called apple first and they said camera was compatible with imovie 11. reading comments that users are having difficulty with imovie reading files from rebel. any comments.

I don't see the camera listed for any version of iMovie:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
That means that any videos you shoot will have to be imported into iPhoto and then moved to iMovie.

Two different areas on my fcp x project are having difficulty rendering

Similar Messages

Maybe you are looking for