Two Different Cameras, Same Timeline and Sequence

I am filming with a Sony Z7U and a Panasonic GH1. I use 1080i 30p for the Sony and FHD (which is 108024p) for the Panasonic. I am looking for some advice on exactly what works best and what gives the best outcome for these two units when I Log and Transfer, Easy Setup, and Export using Quicktime Conversion. After that is there any particular Compressor setting I should use to burn to DVD using DVD Studio Pro.
Any help and thoughts would be greatly appreciated.

Well it's 1080 30p but on the LCD it says 1080i HDV 30p. I think for what I'm doing, I'm going to capture everything using HDV 720 30p. I don't need 1080 and i am somewhat disatisfied with the Panasonic quality in low light on 1080 24p. So I will use the other setting which is 720 60p and then capture it 720 30p.
I film weddings, so I'd rather have the faster frame rate for low light and moving shots. I can bring the film look back slighty with the capture settings an color work.
Anyone else with settings?

Similar Messages

  • Inadvertently combined two different cameras same date folders

    I accidentally combined my Canon 30D 2011-12 folder with my Hp 850 2011-12 folder, now one camera's images show missing, and so does the folder for the missing images. Since they have all been keyworded and developed, how can I recover the appropriate ones back into the right missing folder? Thanks for any help!  Jennings

    Darn, I forgot to say that the folders and images are still intact on the hard drive. It seems to be only in LR 3 that they have become scrambled. I tried to re-import them again, but it recognized that they already were in LR somewhere. I was hoping that they would just re-establish contact and let me move them afterwards, but to no avail.

  • I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

    I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

    Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

  • Lightroom not merging and sorting images from two different cameras - help please !!

    Hi guys,
    I need some help here. I've just imported a few thousands of images form two different cameras, however Lightroom simply sorts them by camera only. (i.e.. images from the first camera, all sorted by capture time, then come images form the second camera.)
    The cameras are the same brand and model, times are synchronised, but the images refuse to merge and sort. I've tried putting them in the same folder and importing, but that doesn't do it either. I've been doing this for years and it all worked fine, till today. Does anyone know whats causing this, and how I can fix it?
    Thanks in anticipation.
    Latch

    Hi John,
    View > Sort > Capture Time is checked, The cameras are in sync down to the second, and images from both have been merging and sorting fine for over two years, till today. Sort order is all set to capture time in all modes and views, but its still sorting first by camera.

  • My wife and I decided to both buy Iphones do I put them both under the same apple ID, or do I create two different apple ID's and two differnt icloud accounts?

    My wife and I decided to both buy Iphones do I put them both under the same apple ID, or do I create two different apple ID's and two differnt icloud accounts? We want to be able to share my itunes library on both our phones and sync our calendars, but I don't want every update and reminder that my wife puts in her phone and I know she doesn't want every reminder I put in my phone.

    What you need to do is both use the same Apple ID for iTunes content, but separate Apple ID's for everything else. So, you keep your existing Apple ID. If not a verifiable email address, you will need to create a new Apple ID for yourself. You also create an Apple ID for your wife, again a verifiable email address. You use the existing Apple ID for all iTunes content. The new Apple ID's for iCloud, iMessage, FaceTime, etc. Here's how to create an Apple ID:
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
    Use multiple devices on one computer:
    http://support.apple.com/kb/HT1495

  • Importing and editing footage with two different cameras

    I am editing a film that has footage caught and imported from two different cameras. Some of the footage is from a handheld HD camera that I have worked with before and use an "Easy Setup of Apple Intermediate Codec, 29.97 fps, HDV Apple Intermediate Codec 1080i60." I want to add some video footage that I shot with my Canon Rebel t2i. I searched a number of threads and concluded that when working with a project shot with the t2i, I should have the the Easy Setup be "HD, 29.97fps, DVCPRO HD 1080p30" (side question: is this correct?). My question is when starting a project where I will be using footage from both cameras, what Easy Setup should I use and is there anything else I should keep in mind?

    Shane-- Thanks for the willingness to help. I am in Helena, but travel all over the state for work--I am a fly fishing and bird hunting guide who likes to do some amateur filming and editing on the side. Love Missoula, Bozeman, Flathead area, etc! And since you are willing to be so helpful, I guess I should start with a go Cats!
    I am brand new to FCP, having previously worked a fair amount with FCE4. I actually do have FCP 7 and work with it on my Macbook Pro. My handheld camera is a JVC Everio that captures in AVCHD (1920x1080). I had my Easy Setup in FCE4 as Apple Intermediate Codec. If I use footage from this camera in FCP7, should I continue to do this?
    So not only am I new to FCP7, but I just bought the T2i and really am not totally sure what I am doing yet. I just got the Canon EOS Movie Plug-in and modified it according to some threads I read so that it works for the T2i. I also found directions on the Canon website on the proper way to Log and Transfer for T2i footage (side question: can I dump the files off my T2i onto an external HD and then Log and Transfer them into FCP7 from the external, and is there anything I need to know about when doing this?)
    So now that you know that I am very knew to FCP7 and the T2i, maybe I should start from scratch. When I log and transfer, what format should I use when I transcode? ProRes 442? And then, however you suggest I should transcode, what should my Easy Setup look like for footage from the T2i?
    Wow, if you are still reading at this point, and I haven't exhausted you with all of my questions and naivety, my final question is...once I have become comfortable with importing and editing footage from the T2i, what should I do if I want to log and transfer and then edit footage from both cameras? Do I need to change the Easy Setup? Do I need to make other changes?
    Thanks again in advance for all of your help and patience!!!

  • Lightroom and two different camera types

    I can import CR2 files from EOS 5D Mark II but not the ones from EOS 600d. Is it possible that Lightroom is not importing CR2 files from two different cameras?
    I use the latest version.
    Many thanks!

    Is it possible that Lightroom is not importing CR2 files from two different cameras?
    Yes, it is possible.
    Can you tell us what happens when you try to import? If you get an error message, please quote it word-for-word.
    I use the latest version.
    We don't know what you mean by that. What is the version number of Lightroom?

  • Split valuation for  material with two different price indicator S and V

    Hello Gurus,
    Is it possible to maintain split valuation for same material with two different price indicator S and V.
    For Ex. Material A is manufactured can be manufactured in house ,  procured from outside vendor and can be purchased from subcontracting vendor by providing raw material.
    We want to keep  Price control V for same material " A"  which is procured from outside vendor.
    And price control S for inhouse produced same material " A".
    Besically this material is semifinished and having BOM for subcontracting.
    Please advice.

    Hi
    When the material is split valuated, you maintain the accounting view for the material 1st with valuation category, here the price control should be V.
    When you will extend the material to valuation type "Inhouse mfgd" maintain the price control as S, for valuation type "Procured form outside vendor" maintain it as V.
    Regards
    Prasad

  • Screen saver won't start since Lion upgrade. Two different machines, same issue.

    Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

    For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
    Hope this points the way to solutions for some of the rest of you!
    Cheers!
    Keith

  • Two different Cameras premiere E4 questions

    Please help! I recorded my friends band and I used two different cameras to do the recording. One stationary recorded a wide shot of the band and the other mobile I had with me. I used the mobile one to do closeups then used the audio and video from the wide shot and did clips of just the lined up video of the mobile one. It looks great! So what is the problem. Well a couple things, I am using Premiere Elements 4. How do I save this project at a high resolution for the web (YouTube) also how do I save it to burn it to DVD? 
    Finally the really tricky question, the one camera was shot in widescreen format the other full screen. I would like to be able to crop and enlarge the full to make it a wide. I don't want to make the wide a full if I don't have to, because it will crop out band members.
    (I don't really understand the whole picture/pixel/ratio thing)
     Keep in mind this was my first shot at something like this I am trying to get down the actual technical process and I have Ideas of how to approach the shooting aspect in the future to improve it. Any input would help. Here is the link to what I have uploaded so far: http://www.youtube.com/watch?v=JfzjeHwKf38   I don't get why it is so small with crappy resolution, in premiere Elements it looks good. And here are the specs on the cameras: 
    Fuji Film Finepix S1500 (moving Camera) 
    Movie recording
    640 x 480 pixels, 30 frames/sec. (I had it set to this one)
    320 x 240 pixels, 30 frames/sec.
    With monaural sound (Sound wasn't used)
    * Optical or digital zoom function can be selected during movie recording.
    Movie:
    AVI (Motion JPEG) with sound
    Audio
    WAVE format, Monaural sound
    Canon Mini DV ZR900 (Still Camera)
    Digital Video
    Standard Definition or High Definition
    Standard Definition
    Power Consumption
    2.3 W
    Image Sensor
    1/6" CCD
    Total Pixels
    Approx. 680,000 pixels
    Effective Pixels
    tape: 16:9 - approx. 360,000 pixels (ADV.Z off)
    16:9 - approx. 450,000 pixels (ADV.Z on, wide)
    16:9 - approx. 360,000 pixels pixels (ADV.Z on tele)
    Tape Format
    MiniDV
    Maximum recording time
    SP: 80 min.; LP: 120 min. (80 min. cassette)
    Lens
    Zoom Ratio 41x Advanced Zoom
    37x Optical / 2000x Digital
    Focal Length f = 2.6 - 96.2mm
    Zoom Speed Variable / 3 Fixed Zoom Speeds
    Max F/Stop f/2.0 - 5.2
    Focusing System
    TTL (through the lens)

    For YouTube settings, I'd go to the FAQ sub-forum, found on the right-hand side of the main forum page. There are suggestions there. Note: YouTube will re-encode whatever you upload, and they change their requirements monthly, if not sooner.
    Now for the Widescreen vs Standard question. I assume that you used WideScreen, when you set up your Project. Is that correct?
    First thing that I would look at would be to use Interpret Footage for the Standard Clips. Do one first, and choose 16:9 in Interpret Footage. How does this look? Only you can make that call.
    If the band looks too fat, then we'll move on to Plan B. Go to one of your Standard Clips, and Select it. Go to Effects, and then Edit Effects. Look for the fixed Effect>Motion. Twirl it open and then go to Scale. Increase this, until the Frame fills the width of the Frame. This will also effectively Crop the vertical. If you need to alter how that Crop is seen, go to Effect>Motion>Position, and move the Frame up, or down to suit.
    Good luck,
    Hunt

  • WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro.  I have tried two separate USB cords.  I have updated the firmware.  I have tried it on my MacBook, two different Macbook Pro's, and my iMac.  All give the

    WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro.
    The drive is approximately 4 years old.  When the drive is plugged in, I can see the data.  It appears to be working properly.  The only problem is that everyone of my Apple Machines are ejecting it.   Several years ago, this drive connected to Mac machines with no problems.   I have tried two separate USB cords.  I have updated the firmware.  I have tried it on my MacBook, two different Macbook Pro's, and my iMac.  
    All give the same result of random ejection of the drive and the error message of:
    Disk Not Ejected Properly
    Eject "1TB Passport HD" before disconnecting or turning......
    Searching through the web, it seems this is an common/known problem.   Does anyone know the solution?
    Thanks,

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it?

    I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it? I want to use my current Apple ID not the old one. Regards!

    Try this
    http://support.apple.com/kb/ht1495
    Hope it helps.

  • Can I sync the songs from two different Apple IDs (HK and JP) into one iPhone?

    I want to buy some songs from a HK Apple ID and a JP Apple ID.
    I just hope the songs of two Apple ID can appear in one iPhone.
    But I don't want can I sync the songs from two different Apple IDs (HK and JP) into one iPhone.

    Are you currently in Japan or Hong Kong ? You have to be in a country (and have a billing address in that country on your account) to buy or download from its store, that is included in the store's terms.
    You can sync content from different accounts from your computer's iTunes library.

  • HT201269 Can I sync my music from two different devices if I have two different e mail addresses and apple ids? If so how?

    Can I sync or merge my music from two different devices if I have two different e mail addresses and apple ids? If so how?

    Yes, if you choose the Erase and Sync option (or restore your iPod) you will be allowed to sync your iPod with the new computer.
    If you would like to save the content that's currently on your iPod, see this older thread from another forum member Zevoneer discussing the different ways to copy the content on an iPod back to your PC.
    https://discussions.apple.com/thread/2417169?start=0&tstart=0
    B-rock

  • Sync clip timeline and sequence timeline?

    Hi guys,
         Dumb question, but here goes...
    Can you sync the clip timeline and sequence timeline when you scrub?  I want to see the 'edit points' that are in the sequence and sync that to the location in the clip (left window) timeline.
    Thanks for the help.
    Jason

    You can  GANG  the Source and the Program Monitors.  That should do what you want.

Maybe you are looking for