Two different monitors on TV

I am seriously considering buying an Apple TV, because it looks like a very good home theater solution.
The only thing I am a little uncomfortable with, is that I would have to fire up my projector if I want to listen to my music with the Apple TV, which seems like overkill.
So here is my plan: I would like to hook the Apple TV via the components to my projector. The projector has no DVI and no HDMI input. To listen to music, I would hook an additional 17-inch monitor to the Apple TV via the HDMI with the help of an HDMI to DVI cable. The 17-inch would be mounted in the stereo rack.
I was wondering if both video outputs would work at the same time, because if I had to switch the output option back and forth in the settings menu every time I want to listen to music or watch a movie, I would not consider this option.
It would be even greater, if I could assign different resolutions to the different outputs, because my projector is natively only EDTV, whereas the 17 inch supports 720p. But if that's not possible it is not a terrible problem, the projector can down-convert the 720p to its native resolution. Did anyone try this or something similar?
12" PowerBook G4 - 1.25 GB RAM - MacPro - 2 GB RAM - Mac OS X (10.4.9) - 40 GB iPod 4G

Hi all,
thanks for your help and suggestions. Oh how I love DRM I did not think about the whole handshake issue. Although it is not 100% clear to me, why per specifications the component must be switched off when HDMI is running. In the given scenario (that the content requires the handshake) the components would have to be disabled anyways, regardless of a possible HDMI connection.
Also I read somewhere in this thread that the components are not switched off when HDMI is connected.
I want to buy the TV to make my life easier and my home theater less cluttered. I could already connect my computer to the projector via a switch box, so buying several up- or downconverters or a second TV kind of defeats the purpose.
Also, the 17-inch monitor I have in mind is "just" $199. It runs 720p native, has DVI in and a VESA mount, it sounds like a perfect match. I would prefer a smaller monitor though, like a 8 to 12-inch or something, but it looks there aren't any with the right inputs and/or resolutions. Plus, they are much more expensive.

Similar Messages

Two different monitors as multi-monitors

Is it possible to run a two-monitor display using two completely different monitors? I'm replacing an ancient desktop with a Pavillion 500-c60 (Win 8.1), and also bought a W2371d monitor for the new machine. The old PC used a perfectly good, but ancient, Samsung 17-inch monitor.
What would happen if I tried to include my old monitor in my new setup? If I were able to use dual monitors, I would of course make the new HP the primary one. Still, it would be valuable to me if I could have the additional display acreage from the old monitor. However, the displays are not only from different manufacturers -- they are from different vintages, different sizes, different standard resolutions. Is it even possible to do this?
This question was solved.
View Solution.

Hi,
Yes, you can use TWO different monitors as mentioned:
AMD Radeon HD 8400 graphics (combined with the processor)
Supports DX11
DVI and VGA output ports (both ports can be used at the same time)
Full specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c04058837#N247
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Posterized colors on two different monitors with Mac Mini, late 2014 model

Sometimes when I leave my Mac for a while (like an hour or more), I come back to a black monitor, then click the trackpad to wake it up (I assume it is "sleeping" but I don't see a way to make the monitor sleep), I am faced with posterization of the colors and crumbly text, like this:
I can "fix" it by going into System Preferences > Display and change the rotation to 90 or 180 or something. The screen clears up right away. Then I revert to the normal rotation. This is an ok workaround but it is not convenient. I never had this problem with my MacBook.
I first saw this issue with my late 2014 Mac Mini that I got a couple months ago, and it has happened with both monitors I have tried: an old Benq monitor attached with DVI (DVI to Thunderbolt adapter) and a new Thunderbolt Display. The Benq was connected using a DVI to HDMI adapter. I no longer have this monitor. The Thunderbolt Display is attached directly to the Mini using the Y cable to the Thunderbolt port on the Mini.
Yosemite version is 10.10.2. It doesn't happen if I wake the Mac while it's showing the screen saver.
The only things I have checked under Energy saver is "Wake for network access" and "Enable Power Nap". I don't have anything Scheduled, as I don't have a specific time of day I want it to turn on and off, but I would like the Mac to wake up right way and display correctly if I have to leave the Mac for a while during the day.
I've seen other similar threads, but so far all the suggestions I've seen talking about upgrading to 10.10.2 (which I have) or some sort of workaround involving sleep settings (which I can't quite understand). I'm going to call the Mac Store where I bought the Mini next week, or when I have some time, but I have a feeling they aren't going to be able to help me much. It seems like this is such a common problem with the new Mini's I might be stuck with it, unless someone has a better solution or workaround.

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Text, as yo said contact Apple or make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Using TWO iTunes at the same time on different monitors on Mac Pro:

Here is what I want to do:
I want to use a Mac Pro with two displays to play videos from iTunes in full screen mode on the second display while simultaneously playing music not associated with the videos on the main display.
Is this possible or do I have to get a completely separte application to play the videos on the second monitor?

I don't know of any way to get iTunes to play two different things at once, nor to get two instances of iTunes to launch at the same time. So I think you'll have to play either the music or the videos with another app.

How to split one monitor into two, differently configured desktops

Hello,
I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
- one window/space on one side (say, on the left) of the screen would contain the document from top to bottom, with no dock bar on the bottom
- the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
Is this possible? Can anyone recommend an application or type of setup?
Thank you,
-celso

Looking for something like this?
You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
http://www.funk-isoft.com/index.php/display-maid

Unable to monitor two databases with same name on two different hosts

I have got two databases with same name on two different hosts. I added one database to the list of monitored databases. Now If I try to add the other one , I get the message that the database is already being managed.
Can't we monitor two databases with same name on two different hosts?

you can... while saving the target,give a different name.. for eg target-2

Running two different tests on separate monitors

Can I run two different labview executables from one PC on separate monitors
simultaneously? I have a 2 station test facility which I would like to use 1 PC and 2 touchscreen monitors so the 2 operators ccan run different tests on each station simultaneously.
Solved!
Go to Solution.

As long as you are careful about not using the same resources (files, DAQ devices, etc), you can have as many executables running as you want.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once

I am trying to connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once. Windows recognize both monitors as well. But it dowsn't let me use all three monitors at once(see the below image). In the dropdown, it lists all three monitors. Problem is there are two active displays I can select.

Mavec wrote:
I would like to add a third monitor.
The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently. If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
Cheers,
Bill
I don't work for Lenovo

How to sort two different hierarchies in one dimension

Does anyone know of a way to sort two different hierarchies in one dimension and still make drilling work correctly? We have two hierarchies in our item dimension; one called category and the other origin. Simplified, it looks like this:
CATEGORY
Hardware (100)
..PCs (100.100)
....PC 1
....PC 2
....PC 3
..Monitors (100.200)
....Monitor 1
....Monitor 2
....Monitor 3
Software (200)
..Big (200.100)
....ERP package
....CRM package
..Small (200.200)
....Solitaire
....Mine Sweeper
ORIGIN
Vendor A (10)
..Site A1 (10.10)
....ERP package
..Site A2 (10.20)
....PC 1
....Monitor 3
Vendor B (20)
..Site B1 (20.10)
....PC 2
....PC 3
....Monitor 1
....Monitor 2
....Solitaire
....Mine Sweeper
..Site B2 (20.20)
....CRM package
We have numeric codes at each level above item which I represents the sort order (the number in parentheses at each level), and the items themselves should be sorted according to item number. I have implemented this (level code/item number) as an attribute in AWM making this the default sort order. However, as item is the lowest level in each hierarchy, I have only been able to list the items under the correct level in one hierarchy. As soon as I drill using the other hierarchy, the levels above item are sorted correctly, but the items appear at very odd places...
The AWM documentation states that if default order is not selected on any attribute, hierarchies are sorted in the order they are created. Is there a way to control this order?
Any input will be greatly appreciated!

Hi,
thank you for your answer. Yes, now I also find the class CL_SALV_WD_MULTI_CELL_EDITOR which could be used to set different UIE in one cell. But it is quite limited, just the following UIE could be used
- LinkToAction
- LinkToURL
- FileDownload
- Button
- ToggleButton
best regards,
Wenwen

How can I set up two control panels in two seperate monitors using Lookout version 4?

I have Lookout version 4, and dual monitors and i am trying to make it so two seperate control displays come up at the same time upon opening in the different monitors. The guy at tech support said it is not possible, so Iwas wondering if anybody has a possible creative solution to this problem?

Run two instances of Lookout (not possible in LO6+)
You would need to manual put each process on each display
Mike
Mike Crabtree - Lead Developer
Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
(866) 964-6948 / (760) 247-9512

Need suggestion for ISE distributed deployment model in two different data centers along with public certificate for HTTPS

Hi Experts,
I am bit confused about ISE distributed deployment model .
I have two data centers one is DC & other one is as a DR I have requirement of guest access service implementation using CWA and get public certificate for HTTPS to avoid certificate error on client devices :
how do i deploy ISE persona for HA in this two data centers
After reading cisco doc , understood that we can have two PAN ( Primary in DC & Secondary in DR ) like wise for MnT (Monitoring will be as same as PAN ) however I can have 5 PSN running in secondary i.e. in DR ISE however I have confusion about HA for PSN .. since we have all PSN in secondary , it would not work for HA if it fails
Can anybody suggest me the best deployment solution for this scenario ?
Another doubt about public certificate :
Public Certificate: The ISE domain must be a registered or part of a registered domain name on the Internet. for that I need Domain name being used from customer .
Please do correct me if I am wrong about certificate understanding :
since Guest will be the outside users , we can not use certificate from internal CA , we need to get the certificate from service provider and install the same in both the ISE servers
Can anybody explain the procedure to opt the public certificate for HTTPS from service provider ? And how do i install it in both the ISE servers ?

Hi there. Let me try answering your questions:
PSN HA: The PSNs are not configured as "primary" or "secondary" inside your ISE deployment. They are just PSN nodes as far as ISE is concerned. Instead, inside your NADs (In your case WLCs) you can specify which PSN is primary, which one is secondary, etc. You can accomplish this by:
1. Defining all PSN nodes as AAA radius servers inside the WLC
2. Then under the SSID > AAA Servers Tab, you can list the AAA servers in the order that you prefer. As a result, the WLC will always use the first server listed until that server fails/gets reloaded, etc.
3. As a result, you can have one WLC or SSID prefer PSN server A (located in primary DC) while a second WLC or SSID prefer PSN server B (located in backup DC)
Last but not the least, you could also place PSNs behind a load balancer and that way the traffic would be equally distributed between multiple PSNs. However, the PSN nodes must be Layer 2 adjacent, which is probably not the case if they are located in two different Data Centers
Certificates: Yes, you would want to get a public certificate to service the guest portal. Getting a public/well known certificate would ensure that most devices out there would trust the CA that signed your ISE certificate. For instance, VeriSign, GoDaddy, Entrust are some of the ones out there that would work just fine. On the other hand, if you use a certificate that was signed by your internal CA, then things would be fine for your internal endpoints that trust your internal CA but for any outsiders (Guests, contractors, etc) that do not trust and do not know who your internal CA is would get a certificate error when being redirected to the ISE guest portal. This in general is only a "cosmetic" issue and if the users click "continue" and add your CA as a trusted authority, the guest page would load and the session would work. However, most users out there would not feel safe to proceed and you will most likely get a lot of calls to your helpdesk :)
I hope this helps!
Thank you for rating helpful posts!

Is it possible to connect two external monitors to my T400 laptop?

Hi,
I bought a T400 laptop this summer and have it connected through the VGA port to an external monitor, using both the laptop´s monitor as an extended display. I would like to add a third monitor. I am wondering if there is any way to do this or anyone knows further, even if some additional hardware is required. There is no HDMI port on the laptop of course but I´m wondering if some sort of VGA splitter is possible. Any thoughts are appreciated!
Best wishes.

Mavec wrote:
I would like to add a third monitor.
The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently. If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
Cheers,
Bill
I don't work for Lenovo

Two External Monitors - HP laptop G71 343US

Good afternoon,
I have the aforementioned hp laptop G71 343US. I work from home and I use a single external monitor almost everyday connected via the VGA port. I happen to come across another external monitor and was looking on amazon at some parts, and on youtube for videos, etc.
Bottom line question, can I hook up two different external monitors AND use my laptop screen? can this be done in such a manner than the desktop is extended and not duplicated?
I assumed that the VGA splitter i saw on amazon would create a duplicate display on both externals, but i saw videos proclaiming that a usb to VGA adapter could be used to create the desired effect. further investigation revealed that this is a "displayport" to VGA adapter.... i don't even know if i have a 'displayport.'
anyway i'm a little confused and couldn't find a concrete answer to my question. so i came here
thanks for your input!

Hi,
I've got a setup in front of me now using one of my old laptops (nearly 5 yrs old), 2 full HD monitors and one USB dock
The following image show my laptop screen (#1) has my Yahoo (Yahoo7 in my country) homepage, left screen (#2) is a Photoshop session and right screen (#3) has my normal desktop background which is my grandson.
In short: you can, I don't have HP device to test but using a Lenovo DisplayLink with 2 DVI ports from work.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT5299 can two computer monitors plug into the mac?

Is there a way to plug in two regular pc based monitors to the mini mac? I am looking for adaptors or something to plug in two monitors. I currently have one monitor and I used the DVI adaptor to connect it to the thunderbolt plug in thingie.
Thanks in advance for your help.
Maggie

Yeah I have the latest version of the Mac Mini with 2.5 GHz Intel Core i5. It normally comes with 4 GB 1600 MHz DDR3 memory but I upgraded it to 16 GB. I have an old monitor with two different ports one is DVi-D and the other is VGA input - DVI A.
SORRY FOR CAPS MY KEYBOARD IS STUCK ON CAPS- THAT IS WHAT I GET FOR USING PC WIRELSS KEYBOARD BLAH....
ANYWAY I WILL HAVE TO GET A DVI-D CONNECTOR CABLE TO PLUG INTO MY HDMI ADAPTOR TO PLUG INTO THE MAC.
THANKS FOR YOUR HELP AGAIN SORRY FOR THE CAPS
MAGGIE

Problems with EventSource generating two different types of event

Hi everybody,
i was trying to connect an EventSource (capable of generating two different event types: a MapEventType and a TupleEventType) to two CQL processors through two separate channels, each one dedicated to its event type:
ASSEMBLY:
<?xml version="1.0" encoding="UTF-8"?>
<beans ....>
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="testMapEvent">
               <wlevs:metadata>
                    <entry key="message" value="java.lang.String"/>
                    <entry key="date" value="java.util.Date" />
                    <entry key="list" value="java.util.List" />
               </wlevs:metadata>
          </wlevs:event-type>
          <wlevs:event-type type-name="testTupleEvent">
<wlevs:properties>
<wlevs:property name="t_message" type="char" length="4000" />
<wlevs:property name="t_date" type="timestamp"/>
<wlevs:property name="t_list" type="object"/>
</wlevs:properties>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <wlevs:adapter id="input" class="com.bea.wlevs.adapter.example.types.TestAdapter">
     <wlevs:instance-property name="eventTypeName" value="testMapEvent"/>
     </wlevs:adapter>
     <bean id="output" class="com.bea.wlevs.example.types.TestOutputBean" />
<wlevs:channel id="inputChannelTuple" event-type="testTupleEvent">
<wlevs:listener ref="testProcessorTuple" />
<wlevs:source ref="input" />
</wlevs:channel>
     <wlevs:channel id="inputChannelMap" event-type="testMapEvent">
          <wlevs:listener ref="testProcessorMap" />
          <wlevs:source ref="input" />
     </wlevs:channel>
     <wlevs:processor id="testProcessorMap" />
<wlevs:processor id="testProcessorTuple" />
     <wlevs:channel id="outputChannelMap" event-type="testMapEvent">
          <wlevs:listener ref="output" />
          <wlevs:source ref="testProcessorMap" />
     </wlevs:channel>
     <wlevs:channel id="outputChannelTuple" event-type="testTupleEvent">
          <wlevs:listener ref="output" />
          <wlevs:source ref="testProcessorTuple" />
     </wlevs:channel>
</beans>
JAVA:
The com.bea.wlevs.adapter.example.types.TestAdapter class is a simple RunnableBean generating "testMapEvent"s like this:
+public void run() {+
+... bla bla bla ...+
+while(true) {+
Object event = createEvent();
+if(event != null) {+
eventSender.sendInsertEvent(event);
+}+
+}+
+}+
+private Object createEvent() {+
Object obj = eventType.createEvent();
EventProperty p;
p = eventType.getProperty("message");
p.setValue(obj, "Evento #" seqNum); // seqNum is a int+
p = eventType.getProperty("date");
p.setValue(obj, new Date());
p = eventType.getProperty("list");
p.setValue(obj, nipotini); // nipotini is a List<String>
return obj;
+}+
CONFIG:
+<?xml version="1.0" encoding="UTF-8"?>+
+<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application">+
+<processor>+
+<name>testProcessorMap</name>+
+<rules>+
+<query id="testRuleMap">+
+<![CDATA[ select message, date, list from inputChannelMap ]]>+
+</query>+
+</rules>+
+</processor>+
+<processor>+
+<name>testProcessorTuple</name>+
+<rules>+
+<query id="testRuleTuple">+
+<![CDATA[ select t_message, t_date, t_list from inputChannelTuple ]]>+
+</query>+
+</rules>+
+</processor>+
+</n1:config>+
Seems like the events cannot make it beyond the CQL processors:
+<15-dic-2010 20.11.34 CET> <Error> <CQLProcessor> <BEA-000000> <Failed to set property [t_message] of event type [testTu+
+pleEvent]. Cause = [t_message] is not a property of event type [testMapEvent]>+
+<15-dic-2010 20.11.34 CET> <Warning> <Ede> <BEA-000000> <Exception for 'testMapEvent{message=Evento #14, list=[QUI, QUO,+
+QUA], date=Wed Dec 15 20:11:34 CET 2010}' raised by listener = com.oracle.cep.processor.cql.impl.CQLEventReceiver@aa882+
+7+
+com.bea.wlevs.ede.api.EventProcessingException: Internal error processing event [testMapEvent{message=Evento #14, list=[+
+QUI, QUO, QUA], date=Wed Dec 15 20:11:34 CET 2010}] = Failed to set property [t_message] of event type [testTupleEvent].+
+Cause = [t_message] is not a property of event type [testMapEvent]+
at com.oracle.cep.processor.cql.impl.CQLEventReceiver.sendToEngine(CQLEventReceiver.java:389)
at com.oracle.cep.processor.cql.impl.CQLEventReceiver.onInsertEvent(CQLEventReceiver.java:248)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
r.java:159)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
+79)+
at com.bea.wlevs.channel.impl.ChannelImpl.onInsertEvent(ChannelImpl.java:439)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
at com.bea.wlevs.ede.impl.EventSourceEventSenderImpl.sendInsertEvent(EventSourceEventSenderImpl.java:85)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
r.java:159)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
+79)+
at com.bea.wlevs.adapter.example.types.TestAdapter.run(TestAdapter.java:33)
at com.bea.wlevs.adapter.example.types.TestAdapter$$FastClassByCGLIB$$89b675c7.invoke(<generated>)
at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:149)
at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:70
+0)+
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.wlevs.ede.impl.EventManagerAccessorProxy.invoke(EventManagerAccessorProxy.java:30)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.wlevs.ede.impl.EventBeanProxy.invoke(EventBeanProxy.java:38)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:635)
at com.bea.wlevs.adapter.example.types.TestAdapter$$EnhancerByCGLIB$$16190560.run(<generated>)
at com.bea.wlevs.spring.RunnableBeanPostProcessor$RunnableWrapper.run(RunnableBeanPostProcessor.java:117)
at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:196)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
+Caused By: com.bea.wlevs.ede.api.EventPropertyException: Failed to set property [t_message] of event type [testTupleEven+
+t]. Cause = [t_message] is not a property of event type [testMapEvent]+
at com.oracle.cep.processor.cql.impl.TupleValueUtils.raiseEventPropertyException(TupleValueUtils.java:153)
at com.oracle.cep.processor.cql.impl.TupleValueUtils.projectEvent(TupleValueUtils.java:90)
at com.oracle.cep.processor.cql.impl.TupleValueUtils.compareAndProjectEvent(TupleValueUtils.java:48)
at com.oracle.cep.processor.cql.impl.CQLEventReceiver.sendToEngine(CQLEventReceiver.java:337)
at com.oracle.cep.processor.cql.impl.CQLEventReceiver.onInsertEvent(CQLEventReceiver.java:248)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
r.java:159)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
+79)+
at com.bea.wlevs.channel.impl.ChannelImpl.onInsertEvent(ChannelImpl.java:439)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEventToListener(EventSenderImpl.java:360)
at com.bea.wlevs.processor.impl.EventSenderImpl.sendInsertEvent(EventSenderImpl.java:331)
at com.bea.wlevs.ede.impl.EventSourceEventSenderImpl.sendInsertEvent(EventSourceEventSenderImpl.java:85)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventstore.recplay.RecordPlaySendEventInterceptor.sendInsertEvent(RecordPlaySendEventIntercepto
r.java:159)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.eventinspector.EventInspectInterceptor.sendInsertEvent(EventInspectInterceptor.java:132)
at com.bea.wlevs.ede.spi.AbstractSendEventInterceptor.sendInsertEvent(AbstractSendEventInterceptor.java:78)
at com.bea.wlevs.monitor.internal.MonitorSendEventInterceptor.sendInsertEvent(MonitorSendEventInterceptor.java:4
+79)+
at com.bea.wlevs.adapter.example.types.TestAdapter.run(TestAdapter.java:33)
at com.bea.wlevs.adapter.example.types.TestAdapter$$FastClassByCGLIB$$89b675c7.invoke(<generated>)
at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:149)
at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:70
+0)+
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.wlevs.ede.impl.EventManagerAccessorProxy.invoke(EventManagerAccessorProxy.java:30)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.wlevs.ede.impl.EventBeanProxy.invoke(EventBeanProxy.java:38)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:635)
at com.bea.wlevs.adapter.example.types.TestAdapter$$EnhancerByCGLIB$$16190560.run(<generated>)
at com.bea.wlevs.spring.RunnableBeanPostProcessor$RunnableWrapper.run(RunnableBeanPostProcessor.java:117)
at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:196)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
+>+
Can anybody help me figuring out what's wrong?
Thank you in advance!

Hello Chris,
Wondering if you've found a solution for this.
I was thinking you could make a web app that used the jQuery dialog, then let the client just put an individual web app item on the home page when they want to have the pop up.
This way it is more like one type of modal window and the client can show whatever they want when they want, and turn it off by removing the module.
You can place the module inside a content holder so they do not mess up any template or page content.
Hope this helps,
Chad Smith | http://bcgurus.com/Business-Catalyst-Templates for only $7

Two different monitors on TV

Similar Messages

Maybe you are looking for