Two different radius authentication methods on one guest wlan

I would like to use two different radius servers to one guest wlan.
One radius server is the Cisco NAC guest server, but I would like to use e.g. a RSA SecurID server as the second.
If the user does not exsist on the NAC guest server, the wlc should check the RSA server.
As I understand the servers mentioned under the layer 3 config tab on the wlan configuration tab is doing round-robin.
Is there any way that I can implement this?
Best regards,
Steffen Lindemann

Is there anything on the roadmap for the NAC guest server to use AD as an external database?
It seems like it shouldn't be too difficult since the server is already using AD to map sponsor roles.
We really would prefer to use a single SSID instead separate SSIDs for guest and domain accounts.
Thanks in advance!

Similar Messages

  • Can you use two different apple ID's on one Ipad?

    I would like to use two different apple id's on one IPAD.  One apple ID is for work and the other is for personal use.

    Read this.
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
     Cheers, Tom

  • Is there a way to consolidate two different Apple ID's into one. I have an old Apple ID that I used for Itunes and a new I used to set up my iphone.

    Is there a way to consolidate two different Apple ID's into one. I have an old Apple ID that I used for Itunes and a new one I used to set up on my iphone.

    You cannot merge accounts.
    Why did you start a new account?

  • Can i have two different face time accounts on one apple id

    Would like to have two different face time accounts, one on mac book pro and one on ipad.  Can I have two different face time accounts on one apple id?

    You simply need to have a separate e-mail identifier for each.  One e-mail address would be associated with the mac book, the other separate and distinctive e-mail address would be associated with the i pad.  This is done under one single apple id.  Essentialy, the e-mail addresses are the FaceTime calling numbers for each. 
    Wuz

  • Can I have two iPads with two different credit cards linked to one iTunes account?

    Can I have two iPads with two different credit cards linked to one iTunes account?

    It is still not possible to have two credit cards with your iTunes store account. I've just had a discussion with an Apple representative who suggested I give feedback to Apple about this. The more we are, Apple might listen to us in the end.
    This is the link
    http://www.apple.com/feedback/itunesapp.html
    Please feel free to use or modify what I wrote there:
    I’m surprised as are many other people who have the same issue (can see this in many forum threads) that Apple don’t give us the possibility to have at least 2 credit cards with one AppleID/account like most other vendors do (even much smaller than Apple). This certainly forces people to buy some stuff elsewhere that they otherwise would have purchased from Apple (for example books) or restrain from buying things they would have bought if they had a choice to use a second Credit Card.
    Not having this option puts me in a precarious situation since it would not be OK to buy just anything with the Credit Card that is tied to my business (and in many cases like mine the business is only one person, the VAT No being the same as my social security No).
    Sole traders need an option too.
    Greetings
    Anna

  • Two Different Generation IPod Nanos and one Computer

    Okay so my boyfriend and I have two different geneeration IPod Nanos and one computer.. does it affect either device's performance ? and is it possible to have itunes setup so that he can have he's music sync to he's Ipod and vice ver sa without having any hassle? .. does this make any sence?

    In your case it is most likely a drive letter confusion issue. Take a look at the following article and see if the steps help fix your issue:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • Run two different Tcodes "KKS2" then "KO88" one after the other

    Hi Abapers,
    I want to run two different Tcodes "KKS2" then "KO88" one after the other.  The variance is calculated using Tcode KKS2, after the successful calculation of variance the KO88 Tcode needs to be run for the settlement of materials.
    How do I run both the Tcodes in a single program using BDC. The customer needs a Tcode for this and a selection screen for production order number as input.
    Shall I use session bdc or call transaction?
    I also want to display errors of the both the Tcodes in a single log.
    Regards,
    Anuradha.

    Hi ,
           For  uploading datas for Two transaction using a single program u have to go for Batch input session . Its not feasible with call transaction . Create a session using open_session and then with in it you have to manipulate screen number and screen fields for each of them and you have to ues two insert statement . Try using commit and wait after first insert of the Transaction . And then go for the second .And then use bdc_close_session to close the session.So that only one session will be created for both transaction . You could easily get the screen field name and number by creating two call transaction program and copy from them .                                                                               
    With Regards,
                                                                                    M.Sreeram

  • How do I put two different apple id accounts on one computer?

    I have my account on my home computer but I have another account that I set my Ipad up with. How do I put two different accounts on to one computer?

    Refer to FAQ 
    http://support.apple.com/kb/HE37
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs. 

  • Can Apple TV play content purchased with two different Apple IDs (but on one computer)?

    I have one iMac with content in my iTunes from two different Apple IDs. All of this content is perfectly accessible on my computer. Before I ran the most recent software upgrade on my Apple TV 2, I was able to access all of this content (from both Apple IDs) through Home Sharing. Now it shows me all of the content, but skips over any of the songs that were purchased with one of the Apple IDs. It doesn't show an error message--it just won't play the songs. Is there any way around this? I haven't seen a thread that directly relates to this--most threads I have seen discuss two separate computers, each with different Apple IDs. Any help would be much appreciated.

    I've tried everything..unplugging and re-setting the Apple TV, restoring to factory settings and starting over...nothing seems to work. I'm not sure why the software upgrade would have affected it, but that's what triggered this problem. It doesn't seem right that if it's accessible on my computer and it's all music purchased by me, that it's not all accessible on my Apple TV!

  • Loading two different SAP BW system from one SAP R/3

    Hi all,
    is it possible to load the data from one SAP R/3 4.7 to two different SAP BW systems in parallel?:
    A) BW 2.1C
    B) BW 3.5
    I mean not because R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side.
    Are there any other restrictions? Ar there any workarounds how to hande this situation?
    Thanks,
    m./

    Hi dear,
    I think you shouldn't have any problem!
    Look at OSS Note 775568 'Two and more BW systems against one OLTP system' to have more details...
    "R/3 has for example version of R/3 Plug-In which is compatible only to one R/3 Plug-In installed on BW side"...what's your plug-in version in R/3 ? I can't understand what do you mean with "R/3 Plug-In installed on BW side" !!!
    Hope it helps!
    Bye,
    Roberto
    ...and please don't forget to reward the answers...it's THE way to say thanks here, my dear colleague !

  • Can I communicate with two different FP 1000 modules through one labview program at the same time

    I am wondering could you communicate with two seperate FP 1000 modules with one labview program, using a tab control, with page 1 of the tab communicating with one FP 1000 through com port 1 and page 2 of the tab control communicating with another FP 1000 module through com port 4, using different iak files for both. Can I do it through using those wireless modems supplied by National Instruments. Sorry I dont have a name for them.

    Noely,
    Within a single IAK file, you can have multiple FieldPoint modules on separate COM ports. There is no need to use separate IAKs for the program you are describing. Actually, older versions of NI-FieldPoint do not support having multiple IAKs in use simultaneously (I am not sure whether it is currently supported).
    As for the Radio Modems, they are called SRM-6000s and can be used simultaneouslyon different serial ports. Although, using the SRM-6000 in a single master multi slave arrangement, you could use a single serial port to talk to both FP-1000s (3 SRMs total). You will need to configure the FP-1000s to have separate addresses (DIP Switch setting).
    Regards,
    Aaron

  • Macintosh HD, two different "Available" numbers given? One full one with plenty of space.

    My macbook pro has been acting slow and I stumbled on this in the Disk Utility. Of the two hard drive icons, the top one says 18.9 mb available whereas the one under it and in About This Mac give the number 187 gb. Any clue what is causing this? Not sure if this could be the cause of my mac's slow performance.

    The second one is correct.

  • Mapping issue: Two different IDOC P19 segment to one flat file line

    Hello,
    Scenario: For each P01 segment (without uepos) in an order idoc I want to create one line in a plain text file.
    Problem: One P01 segment has two P19 segement with different qualifiers. I want to map both P19.IDNTR (with different qualifiers) fields to the same record in my plain text file.
    How can I do this?
    My "if statement" does noet work. I check the qualifier in the P19 segment. But when one field in the record of the plain text is filled with an P19.IDTNR the second P19.IDTNR field is empty.
    Please advice.
    Best Regards,
    Erik van Lisdonk

    Erik,
    you should get both values if you change the Context of your INPUT-Fields one level higher (for the IDTNR and for the Qualifier that is checked in the IF-statement).
    The Context needs to be set to P01 for all fields and I assume it is set to P19.
    Greetings
    Stefan Hilpp

  • Can two different apple id's use one iTunes account?

    When we first purchase apple products (me and hubby!) we used one apple id account and i downloaded all our music and purchased a lot more. Since then i have purchased my own iPhone and set it up with a different apple id - trouble is i cannot access any of the music   When i tried to sync with our mac all that happened is that our messages, contacts, emails, photos, notes and diaries etc all transferred and became a right pickle - we kept getting each others texts?!  Can i access it if i set up iTunes match?  And if i do that will it copy everything else across as it did before?  Please help, all i want to do is access all the music i organised!

    Read this.
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
     Cheers, Tom

  • HT1923 I have a Vista Operating system with 2 users.  Somehow I got two different play lists each with one user.  One is too big for the storage and has a vast amount of duplicates.  Can I delete the one that is twice as large and then access the other li

    I have a Vista operating system with 2 users.  Somehow I got two diffent libraries for the users.  How can I delete the one and then access the correct library on the other users profile?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Maybe you are looking for