Two different regulatory domains on one access point
Hi
we use a Cisco wireless controller (2500 series) with four access points (LAP1142N).
All of these access points have the regulatory domain E (in the product name). Even the lateset access point we added. But this one cannot activate the second internal radio (5GHz) because of a not supported regulatory domain. The controller shows the first radio as 802.11bg:-E and the second radio as 802.11a:-C.
Changing the location settings didn't effect anything. The second radio is still offline.
Is there a way to change the regulatory domain of the second radio? Or was there a wrong radio/antenna-module installed? Or is it even a bug in the software?
Thanks a lot for your help
RMA the AP.
Similar Messages
-
Access points with differing regulatory domains?
I have four new air-lap1142n-e-k9 that I'm attempting to connect to a wireless lan controller 4402.
We have about 8 similar devices connected to it since earlier.
Connecting them to the wlc isn't a problem, but only the 802.11b/g interface comes up when they're
connected, the 802.11a is taken down. Looking at the configuration of the ap it seems that the
802.11a interface has the wrong regulatory domain. Should be Sweden and '-E' (which all the other
aps have), but the new ones all have -E on the 802.11b/g and -C on the 802.11a (see attached wlc
webgui screenshots).
Is there a way of changing the regulatory domain of the 802.11a interfaces to -E?
And out of curiosity, is there a point in having different regulatory domains on different interfaces on
the same access point..?
Thanks in advance.
/richardPlease check if the regulatory domain should be on the same AP. Please check the PDF for referring codes of different countries-
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a.pdf -
I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name. -
Include a system in two different Transport Domain Controller
Hi folks,
I s it possible to configure a system in two different transport Domain Controller?
The two domain controllers will be in the same /usr/sap/trans file system.
thanks,
MáHello Má
Firstly to include system in the transport domain you need to have systems sharing common transport directory. Which you confirmed is the case.
Now when you try to change the Transport Domain of the system to make it part of another system it will overwrite current configuration.
Hence you wont be able to make one system part of two Domains.
There is no workaround available best of my infomation.
Regards
DG -
I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
Please Advise......You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others. -
Can I use two different itune accounts on one computer?
Can I use two different itune accounts on one computer?
1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
(125941) -
Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.
Adobe contact information - http://helpx.adobe.com/contact.html may help
-
i have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?
The iphone will mirror the selected content of your computer.
Make sure everything is on your computer. Select what you want on your iphone, sync -
How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one
This should do the trick
Home Sharing Learn More
http://support.apple.com/kb/HT201976
Best of Luck -
How do I use two different apple IDs on one itunes?
How do I use two different apple IDs on one itunes?
This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K -
How can I set two different emails in only one contact form?
How can I set two different emails in only one contact form?
To enter multiple email address with the Contact Form Widgets:
Click the Options icon for the selected widget, then
In the Email to box, enter multiple emails by delimiting them with a semi-colon. For example: [email protected];[email protected]
Cari -
Two different condition types in one report
Hello,
i have a problem with the conditional display of a report.
I want to use two different condition types for one report.
For example I want to show the report only when the page is not in printer friendly mode and when the value of an item is NULL.
Is that possible?
Has anyone a solution for this problem?
Thank you,
TimTim,
you can use
IF V('PRINTER_FRIENDLY') = 'YES' AND :P1_ITEM IS NOT NULL THEN RETURN FALSE;
ELSE RETURN TRUE;
END IF;
in the Conditional Display picking PL/SQL Function Body returning a Boolean.
Denes Kubicek -
Packet drop when clients moving from one Access point to another
HI All ,
I am new to wireless . I am using WS-SVC-WISM-1-K9 wism module and using 5 Access points . When my clients are moving from one access point to another we are getting packet drops .
Kindly anyone suggest me what all configuration i need to verify on the controller for Proper client roaming so that i can resolve my issues..
Please let me know in case of any explanations requiered .
Thanks in Advance !!!
Regards
AngusFor radius authenticated SSIDs, you need WPA2-aes or wpa1-tkip-CCKM. It depends on what the client supports.
For pre-shared key, any WPA should be decent enough for roaming speed.
If you're on WEP ... no comment.
If you covered the above point, check if it's not a coverage problem. If the 2 APs coverage zone are not overlapping there will be a hole where you don't have signal and logically will have packet drops. -
Can I have two different podcast URLs on one iWeb website?
Can I have two different podcast URLs on one iWeb website?
I don't think anybody understands your question. Can you elaborate?
-
Two different Dock themes on one Mac?
I use CandyBar to change my icons but I cannot get OS X to recognise two respective users wishes to have separate Dock styles. With one login I would like one style and another with the other but they all seem to share the same resources in the Dock.app.
Is it possible to have two different themed Docks on one machine?
*this also applies to the Finder icon*Hi There
Sorry to say but this is not possible, Candybar works by replacing the image resources in the application bundle. This prevents different users from having their own personal Dock themes and Application icons.
J.C
Maybe you are looking for
-
Taking long time to log in after 10.6.8 update (Golden Triangle)
Hi, Our school has the "golden triangle" set up. After updating our macs to 10.6.8, the time taking to log in as Network Account is taking much longer. It took more than 30 seconds to log in successfully after I got the Network Account Available gree
-
Does anyone know if I can save my Whatsapp messages when doing a back up with iTunes?
I might need to restore my iPhone 5. I was wondering if I do the back up with iTunes, will this save my Whatsapp messages? Or would I have to do it through Whatsapp itself? Thank yoooouuu.
-
Poor font rendition in reader, fine in Pro
I have both Adobe acrobat reader 9, and Adobe Acrobat Pro. I generally just read documents with the reader, but recently I find that the reader gives a very poor font resolution, even at 100%, but Pro gives a great rendition of the same documents at
-
Reference is frequently made to the orange Firefox Tab at the very top of the vers. 4 downloaded screen. I do not have this tab anywhere on my screen, even after uninstalling and reinstalling. Why and how do I get it?
-
Using JavaFX directly in Java without scripting
Group group = new Group(); group.set$translateX(this.translateX); group.set$translateY(this.translateY);How can I now set the content of the group for example a rectangle and a text? Has anybody an idea?