Two different video settings Default 120 and 90 minutes

Still trying to learn DVD SP. I'm getting better but here is my situation.
I'm working on a project and I am running out of space. I have 73 videos that total around 90 minutes worth of footage. I also have review questions that go along with this project and they are menu pages to show the questions and answers. I am not even half way through this project and I am at 2.5 gig. I was told to re-encode the remaining videos to the 120 minute setting from compressor. Will I still be able to use the video I encoded at 90 minutes with the new videos encoded at 120 minutes?

I'm far from an expert at this, but I had a similar situation, where my Disc was slightly over, and I was using the 120 min Compressor preset for most chapters, but I took the longest chapter and re-compressed the video with the 150 min preset, and then it fit. The project builds with no problems, so I think it's quite alright as long as it's all m2v (mpeg-2) video.

Similar Messages

Two different video files in the same clip

Well, I've been looking around and have been wondering if it's possible t have two different video files play at the same time, both being shown at the same time, for example, what I would like to do is; I have two separate video files, one of me playing rhythm on a guitar, the other of me soloing, and would like the to play at once, both being visible at the same time, one on each side of the screen.

if you're using iMovie vers≤6, look at the plug-in makers for some PIP (picture in picture) plug-in...
geethree.com
imovieplugins.com
stupendous-software.com
or, in case you own QTpro, you can use that ..
or, if you like total control, consider purchasing/'upgrading' to FinalCutExpress..

Sync audio with two different video files to create split screen

I want to sync two different video files to a high quality audio file and create a split screen from there in Final Cut Pro X. Help please?

I'm following along at home, Tom, trying to make sense out of your instructions. (Editorially: This kind of operation is among the reasons I thoroughly loathe FCPX.) This would have been easy in FCP7. Perhaps it's actually the same amount of work (you are describing operations in FCPX I have not bothered to try yet—too scared) but it's far more direct the old way: Find sync points for all three files, stack them up in a timeline, nudge till precisely matched, apply effects.
But I'm glad you're here to help us through this stuff!

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID

HT1660 I have two iTunes libraries on two different pc's (one windows and one Mac). Can I consolidate these on an external hard drive?

I have two iTunes libraries on two different pc's (one windows and one Mac). Can I consolidate these on an external hard drive?

I'm sorry I just saw the last post. I had two users on my hard drive, one for me and one for my daughter, but I am not sure what you mean by partioning my external????? I have heard the term before, but don't know how to do it. I am having serious crashing issues with this computer and believe I really need to do a clean install. I just want to make sure everything for both ipods is safe (is???? I think so, everything is......I hate when the English language does this to me!)

How to change two different iCloud account from mac and iPhone?

How to change two different iCloud account from mac and iPhone?

Pick one to use, abandon the other.

Two different clip settings on one timeline

Hello All,
I am combining clips shot with two different cameras on one timeline.
For best quality results of the image, what sequence settings and then export choice should I use? It is a 4 min film that I would like to export as QT or MPEG-4 movie file.
In FCP, both clips look crisp and sharp. I tried various export formats in compressor, but the output always returns the clips from camera 2 de-interlaced (the edges of objects are not smooth but zygzagy).
Clip settings from camera 1:
frame size: 1920 x 1080
video rate: 23.98 and some in 29.97
compressor: Apple ProRes 422
Pixel Aspect ratio: square
Field dominance: None and some have Upper (Odd)
Clip settings from camera 2:
Frame size: 720 X 480
Video Rate: 29.97
Compressor: DV/DVC PRO- NTSC
Pixel Aspect: NTSC- CCIR60
Field dominance: Lower (Even)
Thank you for any suggestions,
Izabela

hazel - if you're making a DVD, then you're going to be using NTSC SD settings - so that's the "send to" compressor - and in compressor you will choose a DVD format, etc.
But if you are creating a digital file to play from a laptop to a projector, I am suggesting you set your frame size to the most common pixel width of most projectors; 1024 x 576 precisely so you do not have to make any adjustments on the projector. You are basically running VGA out (or DVI) into the PC input of the projector and running a quicktime or wmv file and the projector will not have to re-map the image. All of my editing takes place on a mac, and quicktime is my fav but in the corporate world I often have to produce PC friendly files that they take and project with conference type LCD projectors. I do it all the time - this is a good way to go if you are in a similar position.
On larger scale productions, we stay mac based and use high-end projectors and switchers, etc. But when you are handing your edits off to normal corporate meeting attendees they often try to embed them into powerpoint or at least run them in windows media players. If this is the case for you, then I am saying create custom frame of 1024 x 576 if your content is 16:9.

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

Stabilization for the project with the different video settings

If i open project with the settings for 1080p video and then add to it 720p video, how can i make stabilization for it? (When i open another video with the different sequence settings it does not allow me to make stabilization)
Is there any way of working in one sequence with the different settings of the video?

Footage that does not match the sequence setting nest first then add the Warp.

MOVED: two different video cards

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=120411.0

Quote from: Unicron on 02-October-08, 04:10:09
I never actually tried this, but I believe this isn't possible on SLI boards...
You can just have one, or have a SLI setup.
There are a few intel chipset mainboards that aren't SLI or Crossfire which do support this. However, getting the drivers to install correctly is a bit difficult. (the primairy card is installed, and the secundairy can't use the same drivers, and therefore will not work.)
Interestingly, I am able to do this just fine on the P7N Diamond which I believe is an SLI board, Tri-SLI in fact. However the catch is that I'm using ATI video cards: (1) 3870X2 and (1) X1950PRO. Each card is driving different monitors. Obviously, they are not configured for SLI. I had a similar setup on prev mobo (975XPUE) and didn't have issues then either (dual cards in non-Crossfire mode). Unfortunately, this doesn't help much in this situation :(
Quote from: Del UK on 02-October-08, 05:00:30
Here is a must...... all monitors must have same resolution. You cannot have 800x600 on 1 and 1600x1050 and 1280x1024 etc........
Regarding the resolutions, my dual video card setup has two monitors at different resolutions. ATI 3870X2 is driving 22" widescreen at 1600x1050 and ATI X1950PRO is driving 19" standard at 1280x1024. Used to also have a 3rd lcd (on X1950PRO) running at 1024x768 but had to give it to in-law. So, I can confirm it's possible to run at multiple monitors at heterogeneous resolutions. However, as mentioned above, my experience is only with ATI cards.
I haven't personally, nor can I recall hearing of anyone else, been able to run multiple Nvidia video cards in Non-Linked mode (SLI/Crossfire).

HT2498 If I use camera window to download my pictures to my computer, and then I copy and paste the pictures to iPhoto. Would I be ending up having the same pictures in two different files in my computer, and so wasting space in my hard drive?

I recently bought a canon camera. The instructions of the camara recommend to use the canon software (camara window) to download pictures to my computer. I would like to have my pictures in i-photo because it syncs them to my ipad.
I want to download the pictures from my camera to camara window, and then drag and drop the pictures to i-photo. If I keep my pictures in both programs would I be wasting space in my computer hard drive by having the same pictures in two different files?

Yes.
Ignore the Canon software. It gains you nothing and adds complexity. Just use iPhoto for the lot.
Regards
TD

Two different audio settings

I have finally managed to import tapes that were filmed on two different cameras. One had it's audio set at 16bit and the other at 12bit. Is it possible to convert the captured 12bit footage to 16bit, or can I use them both in a project without effecting audio sync?

You do not want to mix clips with audio bit depths in a sequence.
Export the audio from the 12 bit clip, resample it in Soundtrack Pro, Peak or even Quicktime Pro to 16bit/48khz and bring it back into FCP. Life will be good.
cheers,
x

Is it possible to have different margin settings for odd and even pages?

Hi guys.
I am formatting a book I want to get printed and it would be very helpful to have different margin settings on the odd and even pages so the text won't fall too close to the gutter (as happened in the proof copy I ordered!).
It's possible to do this on Word, but I can't seem to do it on Pages? Am I missing something?
Any help would be greatly appreciated. Thank you

Thanks Peter. I upgraded to Pages 5 a while back. I guess my next question is.....is there any way I can downgrade to Pages 09...anywhere I can still download it from?
Seems a bit of a backward step, but needs must

Two different video formats in one video

hi there,
by mistake, I shot a video using two cameras - one set at 1980x1080 and one 1440x1090
what is the best way to handle that?
using FCE 4.01
Thanks in advance!

Unless very little of the media is from the 60D and/or you have to output back to tape you're better off doing it the other way around. Gets you out of the whole world of conforming an MPEG codec, which is very weak codec for compositing.

Been on hold two different times for more that 30 minutes....Followed the instructions and my phone said that activation has failed. FRUSTRATED

how do i activate my 6? I followed the instructions and it said my activation failed...now on hold for 2 different times. been screwing with this for 3 hours.

I highly doubt that the VZW CS reps are sitting by idly letting people stew on hold. I'm sure there are loads of people just like us that have questions, but they don't know how to get online and figure things out. Yes, people like this have iPhones. My point is, I wouldn't blame this on Verizon's Customer Service. If you're truly frustrated, take the suggestion given and try it.

Two different video settings Default 120 and 90 minutes

Similar Messages

Maybe you are looking for