Two e-mail accounts, only want audible notification for one of them

I have two e-mail accounts, account A is my corporate e-mail account, account B is the account I setup for blackberry.net ([email protected]).  I have been trying without success to setup different alerts for different e-mail accounts.  Basically, I want to turn on audible alerts for account B only, so that I can use the Blackberry as a paging device, only distributing that e-mail account for on-call paging.
Could someone please tell me if that's possible?  At one time, I had alerting turned on, but it was for every e-mail, including corporate e-mail, so that was pretty much useless for my purposes.
NOTE: I have already tried bbalerts.  As far as I can tell, it only alerts for Subject: and From: lines, not the To: line.
Please help
Solved!
Go to Solution.

Did you change the volume setting as well?
It should be something like this for the settings:
Out of Holster: Tone
Ring Tone: (choose one)
Volume: (set to anything other than mute)
Make sure to save the settings.
The "in holster" settings are for when the phone is inside the leather holster usually provided with the phone. The holster has a magnet that, when it is detected by the phone, powers down the screen and locks the keyboard to save battery life.
Do a battery pull once you are done:
1. Remove the battery while phone is turned on
2. Wait a few seconds before inserting it again
3. Allow the long boot up process to finish (takes a few minutes usually)
This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://software.crackberry.com/product.asp?id=27660
A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Similar Messages

  • I have two identical Mail accounts. How can I delete one without losing all the mail in both accounts?

    I have two identical Mail accounts.  Don't know how that happened -- the second one just showed up one day. If I try to delete one account, I get a warning that all mail in the accounts will be permanently lost.  How can I delete one of the duplicate accounts without losing messages in both accounts?

    Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
    This is a known issue with Yahoo email account.

  • I have several email account setup on iphone.  for one of them can receive from/to emails from phone, but emails sent from computer not received on phone.  phone shows receiving but does not come thru

    I have iphone 4s with several email accounts set up.  For one of these accounts, and only one, test emails sent from phone come thru fine.  But computer generated mail doesn't come to phone.  For test messages phone shows "receiving" but nothing comes to inbox.  External sent mail does not  come to phone inbox, but does to outlook on computer.  Have checked settings and these seem correct.  What's up?  Four other accounts work fine.

    If you can send e-mail when on WiFi from home, but not when on 3G, that indicates your email provider is blocking e-mail being sent from outside their network. This is done to control Spam. ISPs who do this will usually have a separate SMTP server that should be used when using a mobile device. Check with them again.

  • Only want alert noise for one person

    Okay so I have alot of people I have to have on my friends list and they try to message me alot and yeah I dont care but the noise gets on my nerves so I have it turned off,but the thing is when I turn the noise off I cant hear when the one person I WANT to message me messages me so I end up not knowing they message.
    Is there a way I can make it where it only makes a alert sound for the one person and not everyone else? I dont want to block notifications from the other people I just dont want to hear the alert noise from them but I still want to see skype glow orange meaning they messaged. just not the noise.
    Is there a way I can do this? I remember I used to be able to do this on hotmail or atleast have a specific sound meaning its her.

    Did you change the volume setting as well?
    It should be something like this for the settings:
    Out of Holster: Tone
    Ring Tone: (choose one)
    Volume: (set to anything other than mute)
    Make sure to save the settings.
    The "in holster" settings are for when the phone is inside the leather holster usually provided with the phone. The holster has a magnet that, when it is detected by the phone, powers down the screen and locks the keyboard to save battery life.
    Do a battery pull once you are done:
    1. Remove the battery while phone is turned on
    2. Wait a few seconds before inserting it again
    3. Allow the long boot up process to finish (takes a few minutes usually)
    This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://software.crackberry.com/product.asp?id=27660
    A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    You are most welcome

  • In an IPad 2, can the two different mail accounts be made private

    In an IPad 2, can the two different mail accounts be made private?

    StashPro is an app which can keep things private.
    Photos/documents/videos can be kept private and private browsing is possible with this.
    no matter what you are doing, pressing the home button or power button locks the application and can be opened only by a password set by you while others can access rest of the applications.
    what i do is login to the mail program in the browser and leave it there.  so, the moment you click on this app and give the password, you will be taken to your mail (on the website).
    But the best part is that you can keep all sensitive documents hidden no matter how many people use it.
    hope this helps.  BTW, it costs less than 2 and half dollars and its worth it.  Google StashPro and go to their website to look at additional features.
    You can check the free version before buying the pro version.

  • How to create and switch between two different Mail accounts.

    Dear Apple,
    My wife and I share the same computer and the same single user account.
    Sharing contacts, calendar, music and pictures in fine, but we would like two separate Mail accounts.
    Is there a way to setup two Mail accounts with two separate mailboxes and switch between them manually?
    Regards,
    Stephan

    Ok, I'm confused.  If you have 2 accounts set up -- for example, "[email protected]" and "[email protected]" -- then you go to the "Accounts" tab on Mail->Preferences, and set them up, giving each one a name which distinguishes it from the other.  Maybe "AOL" and "gmail" or "foo" and "bar" or your first names, whatever.
    Then, if you select the line that says "Inbox" you will see mail from both accounts interleaved together.  If you fold down the triangle thingy next to the word "Inbox" then two lines will appear, one for each account.  If you click on one of those lines then your display will only show the mail from that mailbox.

  • Two Separate Mail Accounts w/Two Separate Address Books?

    I want to set up two separate mail accounts with two separate address books. I've been using Mail for several years and love it. My wife has been with AOL but now wants to move to Mail.
    Is there a way to have two separate accounts, two address books, and two separate Mail icons to click to open, so we aren't tempted to look at each other's incoming/outgoing mail? Also, our address books are very different and we'd rather not intermingle them.

    Hi StacheCache!
    She could also retrieve her AOL Email online, without a separate User Account on your shared Mac.
    She would log in to AOL Webmail using her AOL Screen Name and password.
    ali b

  • I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get  iTunes to recognize this content?

    I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get  iTunes to recognize this content?

    Authorize the computer for the account.
    Content is permanently tied to the account it was acquired wtih.

  • I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

    I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?

    Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
    This is a known issue with Yahoo email account.

  • I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?

    I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?
    This is due to the different changes Adobe has gone through and unfortunately I used different emails at certain times.

    Under one Adobe ID you can have one CC only,if by accident you have purchased two CC under one account, it needs to be cancelled & refunded, please contact Adobe Support at
    http://adobe.ly/yxj0t6
    Regards
    Rajshree

  • HT1338 Every time I open my "E-Mail" account, it always ask me for the password.  Why?  How can I permanently lock in my password?

    Every time I open my "E-Mail" account, it always ask me for the password.  Why?  How can I lock in my password permently?

    I don't understand why I'm getting a message saying the problem is fixed.
    Only the original poster has the capability to mark the question as solved.
    So, some how, you answered your own question as solved.

  • LMS 4.2 - Two notifications for one alarm.

    Currently when a device, say a router goes offline we receive two Active 'Unresponsive' alarms for the router and then when it comes back online we receive two Cleared 'Unresponsive' alarms. All have their own unique Event ID. (shown below)
    I was wondering if anyone could help me to config LMS to send only one Active 'Unresponsive' notification when a device is offline and then one Cleared 'Unresponsive' when the device is back online.
    Here's an example of the Active 'Unresponsive' alarms I receive when I power the router off:
    Notification 1
    EVENT ID               = 0002BI5
    TIME                   = Thu 29-Nov-2012 15:26:32 EST
    STATUS                 = Active
    SEVERITY               = Critical
    MANAGED OBJECT         = router.domain
    MANAGED OBJECT TYPE     = Routers
    EVENT DESCRIPTION       = Unresponsive::Component=172.16.1.254 [router.domain];ComponentClass=IP;ComponentEventCode=1098;InterfaceType=ETHERNETCSMACD;InterfaceMode=NORMAL;InterfaceAdminStatus=UP;Address=172.16.1.254;IPStatus=TIMEDOUT;InterfaceOperStatus=UP;Ne
    CUSTOMER IDENTIFICATION = COMMS TEAM
    CUSTOMER REVISION       = 1
    NOTIFICATION ORIGINATOR = Fault Management Module
    Notification 2
    EVENT ID               = 0002BI6
    TIME                   = Thu 29-Nov-2012 15:26:57 EST
    STATUS                 = Active
    SEVERITY               = Critical
    MANAGED OBJECT         = router.domain
    MANAGED OBJECT TYPE     = Routers
    EVENT DESCRIPTION       = Unresponsive::Component=router.domain;ComponentClass=Router;ComponentEventCode=1101;SystemObjectID=.1.3.6.1.4.1.9.1.569;Description=Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T13, RELEASE SOFTWARE (
    CUSTOMER IDENTIFICATION = COMMS TEAM
    CUSTOMER REVISION       = 1
    NOTIFICATION ORIGINATOR = Fault Management Module
    Any suggestions?

    Am I alone with this issue of receiving two notifications for one Unreachable event?

  • How to stop update notification for one app (iMovie) that I do not want to update

    How to stop update notification for one app (iMovie) that I do not want to update. I do not want iMovie 10 taking up nearly 3 gb on my hard disc. iMovie 9 is just fine and only takes up 1.5 gb. But I get notifications to update and don't know how to turn it off. I've gone into the Purchases tab of the App store and deleted it. I don't want to turn off Update notifications (which is irrelevant in any case because I see no option to do that in Notifications system preference pane). I just don't want to be bugged about iMovie updates. The only option I'm given is to postpone the next reminder until the next morning. -- Franklin

    Interesting; never came across that - here is the window I get (just double clicked on a random doc in the trash):

  • HT1386 Just downloaded 7.2 into my Iphone 5 what a mess.  Dropped called no audible notifications for email or text messages.  Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize th

    Just downloaded 7.2 into my Iphone 5 what a mess.  Dropped called no audible notifications for email or text messages.  Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize the phone.  I have gone thur the steps for windows 7 and still nothing???  I have downloaded the newest version I itunes too. 

    Hi Midwestboy,
    If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    - Brenden

Maybe you are looking for

  • I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

    I have found an issue with MS13-098 which causes systems to be renamed to  MINWINPC.  The issue has been reported in Japanese by Microsoft. The translation is: Phenomenon   In Windows Server 2008 or Windows Vista, you might not be able to log an erro

  • MY MACBOOK WONT BOOT FROM CD

    Hey everyone. Here is a problem. I have purchased a macbook pro with snow lepoard and it was working perfectly.I am using it mostly for music production and i had 2 or 3 big software programs running at the same time and it was also working perfectly

  • Open item manage accounts clearing problem

    Dear experts, We have created some of the liability gl accounts master without open item management.  After a period of time we have converted the gl accounts into open item management by executing the programme RFSEPA02.  Now we are going to clear t

  • How do I get rid of a virus manually on my Mac?

    The threat is labeled as OSX/Geonei-A. My anti-virus will not get rid of it on its own. It claims I have to do it manually. Can anyone help me and guide me through this process?

  • How to create a circle object with center(lat/long) and radius(kilo)?

    Hi I want to create a circle in my table, the data I have are the coordinate of center(lat/long) and the radius of the circle. The srid of the table is lat/long. Did I have to use some fomula to compute the coordinate of three points on the circle? I