Two earlywatch reports for same instance in one Solution manager

Hi
i am trying to create two solutons for early watch reports for same instance. let me explain here.
In SAP Solution Manager: Active Solutions >>> i have two solutions like this
Solution                                                          Early Watch Alert Reports
Avnet Global Solutions         >>>> here i have configured the PR1, PB1 PCB instances
PR1                                      >>>>>here i configured the only PR1 instance.
so i have configured the same instance in two solutions.
i am not gettting the early watch report automatically after after configuring like this . but manually working fine.
when i kick of the report manually working fine.
here my question is ... do i can create two early watch reports in one solution manage for same instance or not. if yes then why i am not getting report automatically.
Thank you
Vish

Dear Paul,
Thank you for your response
this is what i got from SAP.
Hello Vish,
You can have the same system in different solutions. With regards
to why the report is not generating automatically, please review
SDCCN on the satellite system.
I dialed into the system and found that the SDCCN for PB1 is not
downloading the sessions from Solution Manager.
I would recommend that you deactivate and then activate SDCCN.
Tcode SDCCN -> GoTo - Settings - Task Processor - Deactivate
Tcode SDCCN ->Utilities -> Activate
Then create a Refresh Session task and verify if the upcoming sessions
are getting pulled down to PB1.
If you need help with this, please let me know if it is fine with you
if I make the necessary changes to get the system working.
Thank you in advance and best regards,
Jared Singh
SAP Active Global Support - Netweaver Web Application Server
could i know your comment

Similar Messages

Two reconciliation account for same one time vendor

Is it possible to have two reconciliation account for same one time vendor?

Hi
1.Two reconciliation account for same one time vendor IS NOT POSSIBLE.
2.create 2 vendor master for the same ONE TIME VENDOR and maintain the recon account accordingly
3.Multiple recon a/c can be assigned to a vendor only thru spl g/l indicators but if u go thru this way then we cant use the purchase flow of PO-MIGO-MIRO . Vendor invoice can be passed only thru fb60 using spl gl indicators. Spl gl indicators cannot be used in MIRO.
Check which will help u
Thx
Raja

Generate two xml reports from same execution

I need to generate a summary report and detail report from the same execution.
Detail report will record all the steps marked as Record result
Summary report to record only the steps that are of type Pass/Fail, Numeric Limit Test, MultiNumeric Limit Test and String test.
So far I have been able to generate two detail report from same execution and can save each report in separate folder.
How to get the data for summary versus detail report from the running sequence?
CLD,CTD
Solved!
Go to Solution.
Attachments:
ReportFolders.JPG ‏115 KB

Thanks for the approach.
I have created a sequence which recursively looks through the Parameters.MainSequenceResults and if StepType is one of the Test Types then displays in summary report.
On the summary report I also wanted to get the name of the subsequcenCall if that subsequence call contained a valid TestType for summary report. For example if subsequenceCall step has a Action and String type. I wanted it to display as shown in Image1.jpg below. Currently it displays as shown in Image2.jpg.
Attached is the recursive sequence that I am using.
CLD,CTD
Attachments:
GenerateSummaryReport.seq ‏8 KB
Image1.jpg ‏35 KB
Image2.JPG ‏140 KB

How to Maintain two different prices for same material in different qty?

Dear all,
How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
(Vendor is supplying quantities in 2 different batches & also in different prices)
Expecting valuable reply.
Jeyakanthan

In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
In info record it is not possible to have different prices for the same period, except for scales.
so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

How to arrive same day two difference prices for same material/customer

how to arrive same day two difference prices for same material/customer.pls give the solution
thanks in advance
Aravinthan.K

Hi
This is possible through some careful customization
In your condition table you need to bring the field PRICE LIST
That is customer/ Material/ Price list
That is customer ABCD / Material X / Price list 01---Price is Rs 10
That is customer ABCD / Material X / Price list 02---Price is Rs 20
The condition records to be maintained like this
So same material and same customer with price list 01 price is Rs 10 and with price list 02 price is Rs 20
Now in sales order you will find price list field in item details SALES B tab
Through incompletion log you can make this field as an mandatory field
Now in sales order same material and same customer according to the price lists different price is picked
In img-sd-basic functions-Maintain Price-Relevant Master Data Fields--here you can define different price lists
Regards
Raja

Aperture: two browser windows for same project?

I know that I can have two browser windows, each showing a different project; I want to have two browsers windows for SAME project. Is there a way to do this?

Can't be done as far as I know. Here's a link to some tips on multiple tabs in Aperture. http://www.apertureexpert.com/tips/2010/9/7/aperture-has-tabseasily-compare-proj ects.html

Folder is empty on second computer. I have installed adobe CC on two different computers for same account so I can work at two different places. I uploaded files to it yesterday and I can't find it on the CC folder on second computer. What can I do?

I have installed adobe CC on two different computers for same account so I can work at two different places. I uploaded files to it yesterday and I can't find it on the CC folder on second computer. What can I do?

Hi DeafScientist,
Please try the below mentioned links.
Creative Cloud Help | Browse, sync, and manage assets
Error: "Unable to sync files"
Creative Cloud File Sync | Known issues
Kindly revert if you are unable to sync files.
Thanks,
Atul Saini

How to install PI instance on the same server that has Solution Manager 4?

I am planning to install PI 7 on a windows 2003 server that has Solution manager 4 running on it already.
I am planning to install an additional Oracle instance and put PI on it.
What are the steps involved?
Please advise.
Thanks and regards,
Bhaskar

Barry,
I went throught this link when I firt tried MCOD. may be the mistake I did was that I tired installing two separate instances like Sol Man and XI into the same oracle database. it used to fail at the step of Creating table Spaces.
I tired this when I saw some docs on MCOD (I think from IBM).
May be the approach was wrong.
Let me try this new method of installing two different Oracle instances and put Solution manager on one and XI on the other.
I will update you some time today.
Thanks for the help so far.
Regards,
Bhaskar

Adding systems with same SID in SMSY - solution manager

Dear All,
We are having systems with same SID's which belongs to different landscape created for various customers.
Currently We are having only one solution manager.
I consider this example for explanation.
Customer 1 : DEV --> QAS --> PRD ( SID's)
customer 2 : DEV --> ACC --> PRD ( SID's)
I would like to add these 6 systems in a solution manager. For Customer 1 , I have included the systems in SMSY . But when i tries to add DEV, PRD for customer 2 , it fails since this SID's are already present.
Is there any other way to include by giving the different SID's DE2 but with correct IP and host Or we need to have one more solution manager ? Please anyone suggest me on this
Thanks
Raj

Dear Juan ,
We can add systems with same SID in smsy. I have attached the way in which i have done. This may help others. Thank you all for your suggestion
Only use more than three characters if your landscape contains multiple systems with the same system ID (if you have a mirrored backup system that has the same ID as the original system, for example).
If multiple systems in your landscape have the same system ID, choose as system name the system ID with a suffix of up to 5 characters (a sequential number, for example) to create a unique system name.
The system accepts a system name of more than 3 characters if you choose Enter to confirm.
Thanks
Raj

More than one Solution Manager

Hi,
We have 3 data centres around the world and each have a number of SAP systems, ABAP, JAVA and ABAP+Java. At present we have one central Solution Manager that is configured primarily for ASAP, change management etc and not really configured for CEN or RCA.
So my question is, has anyone setup more than one Solution Manager when they have multiple data centres around the world or is everyone just using a central Solution Manager?
Any advise would be greatly appreciated.
Regards
Brian

Thank you for your reply. Our Central Solution Manager is already 4p/8c with 20Gb on Windows Server 2003 and when we connect all our SAP instances, some 120 of them then the Solman basically stops. So I am curious, very eager to find out if anyone has setup more than one Solman to handle large numbers of SAP instances and handle geographic separation of SAP instances.
But thanks for your reply.
Brian

How to push tickets from one solution Manager to other Solution manager

Hello,,,,alll
i want to push tickets from one solution manager to other solution mamager. Also the status along with various partnet function to be updated as well.
i have done lot of rnd over it..weent thru all the spro settings......even had my developers work day in day out....but the output is not satisfactory!!!!!
is there any way i can do it only via customizing!!!...no development ....
Achilles!!!!!

Hey Shridhar,
I think you can do this by copy the whole client from one system to another.
Instead of using the ABAP consultants, get in touch with BASIS consultant to achieve this.
I have not tried this, but do let me know about it holds for you.
Reward for usefull answer,
Regards,
Anand.

Authorization check For Test plan in SAP Solution Manager test management

Hi experts,
I need to allow only selected user to view their test package and the list of transaction so i need to have a authorization check by using enhancement i got struck since i am not able to find any badi for this ..kindly looking back your suggestion

Hi Namrata,
Yes, you can create project structure before using solar01 tcode. later once your test cases (either manual or automatic) are ready then you can upload them using solar02 on test cases tab,
refer Link Test Case to Transactions/Reports - Configuration - SAP Library
Assignments - SAP Solution Manager - SAP Library
Thanks
Jansi

Two users in the same Mac accessing one TimeCapsule

Hi,
How can i make two user accounts in the same Mac access simultaneously the same TimeCapsule?
I've tried setting them to use accounts to connect to TimeCapsule as well as using a single password for TimeCapsule.
But i keep having the same problem. When one user accesses the time capsule the other gets ejected or the TimeCapsule folder appears with a forbidden sign.
What do i have to do?
Please help.
Thanks in advance

I think i understand what is happening.
Leopard mounts the TimeCapsule disk using mount_afp command and any disk mounted with mount_afp will automatically have as owner <user>:staff and read and write permissions only to the owner. All other users have access denied.
(If anyone knows how to change the default permissions of mount_afp please reply!)
If like me, you have two user accounts in the same Mac (lets say user1 and user2) and use fast user switching a lot like i do, since it is a family computer, you'll have serious problems since what happens is the following:
1. Mount the Timecapsule in user1.
2. Fast user switching to user2.
3. The TimeCapsule will appear unmounted in user2
4. Mount the TimeCapsule in user2.
5. List the /Volumes folder and you'll see something like this
drwx------ user1:staff /TimeCapsule
drwx------ user2:staff /TimeCapsule-1
No problem... I can live with having two mounts for the same network disk.
The problem is the following...
6. Fast user switch to user1 again.
7. Open a finder window
8. On the left the TimeCapsule is listed as a network drive (as expected) and is shows as mounted!
However... The association has changed and once i click the TimeCapsule icon in the sidebar it now points to /Volumes/TimeCapsule-1 and therefore user1 has permission denied.
9. I opened a terminal window with user1 and went to /Volumes/TimeCapsule and everything was ok!.
So the conclusion is... the finder window sidebar TimeCapsule is pointing to a Volume it shouldn't be...
How is it possible to correct this situation???
Please help! I just want a way to have two users on the same machine using the same time capsule at the same time.
Thanks!

Cost Estimation Through Two PIR valid for same material

Hello Everyone
I am trying to costing strategy with PIR (Purchase Info Record). Just to check whether its working right or not i have only choosen sub strategy 'Effective Price from Quotation'. My problem is we have got more than one PIR for the same material from different vendors (both have valid dates). My first question is how system will calculate if both PIRs for same material is valid with different prices.
My expectation was that system should pick up the price from PIR which has regular vendor flag ticked in PIR master record but this is not the case. System is picking up the price from the other PIR although i don't know the logic. I am observing system is picking the lower price (as i tested two materials) in both cases. Can anybody guide me how can i make sure that system picks up the price from PIR which has regular ticked or can anybody suggest something elsethat which is right sub strategy to use for PIR?
Thanks in advence

Hi Young Sun
The link really helped me a lot to understand the process how system is picking up price. We don't use source list and quota requirement. I have noticed that system will not consider regualr flag tick in PIR for costing unless you you configure at backend in
Material Logistics->Purchasing->Source Determination->Define Regular Vendor
Once i have activated that tick system is working fine and picking up the price from regular vendor flag. If regular vendor is not ticked system will go vendor with lower price.
@Imdad: Thanks for your kind help as well and input.
Many thanks again.
Regards

Page Export / Import in between two workspaces in the same instance

Hi All,
I am trying to import a page from one application to another application in a different work space in the same instance.
In the export file i have changed the target application id and workspace id. I am facing below error while importing the specific page.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (FLOWS_030100.WWV_FLOW_PAGE_PLUGS_PK) violated <pre>declare s varchar2(32767) := null; l_clob clob; l_length number := 1; begin s := null; wwv_flow_api.create_page_plug ( p_id=&gt; 190100618443233983 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_page_id=&gt; 31, p_plug_name=&gt; 'Upload Scripts', p_region_name=&gt;'', p_plug_templa
Error installing page.
Return to application.
Any help for this.

I got the solution for the page export/import in between 2 workspaces.
Only thing is we need to do some template related changes in the page, item, region attributes .
Ref: http://www.dba-oracle.com/htmldb/t_exporting_copyin_pages_screens_workspaces.

Two earlywatch reports for same instance in one Solution manager

Similar Messages

Maybe you are looking for