Two effects concurrently? all together. at the same time?

So- I'm trying to have three effects happen at once. quick Fade in- outline float - then slow fade out.
the fade in is the only thing that looks how i want it to. it fades in evenly all at once. The fade out fades from screen left to screen right. is that because I have it as a long-long slow fade? Can I make it fade all at once instead of left to right?
I'm having the text fade and after a few seconds of fadeing the outline float kicks in. so both efects are supposed to happen at the same time. am i asking too much?
I made the outline white, so I should be able to see it flow upwards. thats not the case when I import to fcp. but i do see it happen in the canvas window in live type. Is there something else I need to do in order to see this effect?

DaNam and Bogie offer solid advice.
And it's the cancel out message from Bogie that doesn't allow you to have the white outline float up.
To achieve that you need to select your text in the timeline.
In the Inspector click on the Style Tab then Outline and click the Enable box. Then change the color to white and this will allow your outline to be white in both LT and FCP.
Good luck

Similar Messages

When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

Generally setting a common Album Artist will fix things. For deeper problems see Grouping tracks into albums.
tt2

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

Can I export my sidecar files to two or more hard drives at the same time from one computer?

Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?

Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that.

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

On I-Mac, how can I close all tabs at the same time?

On I-Mac, how can I close all tabs at the same time?
I use Mozilla Firefox for internet.

Not an Apple product, have you visited:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-qu ickly

How to change drill filter values of all reports at the same time

Hi,
The Webintelligence users in our environment usuallly use drill filters in their document's reports. We'd like to find a way to change the drill filters' values of all reports when one value is selected. I mean, we need a work around to change the drill filters of all reports at the same time.
We are using Business Objects XI 3.1 (a lot of webintelligence documents available, over than 2500).
Does someone know a way to do that? I've already looked for that a lot, but I couldn't find anything.
Thanks in advance,
Gustavo Borges

Hello Gustavo,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

IPVC-3511-MCU - Can't see all persions at the same time on conference

Hello,
I can't see all persion at the same time on conference. I also can't see seperate screen on LCD pannel or CVTA on PC.
Does IPVC-3511-MCU support multiple conference with multiple video screen?
Regards,
John.

Hi -
This feature is called continuous presence - there are a number of references on Cisco's web site for the 3511. Here is one - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_administration_guide_chapter09186a00804fc993.html and possibly another - http://www.cisco.com/en/US/customer/products/hw/video/ps1870/products_data_sheet0900aecd801c5e66.html
You did not mention the release of the 3511 software you are running. Knowing that might help too.
Ginger

Upadting all articles at the same time?

is there a way of upadting all articles at the same time? I have like 64 articles in one folio and I dont see a way of updating them in the folio builder all at once, I have to click on every article and choose update in the Folio Builder, then wait, then click on another, update and wait....

That will definitely be a relief
BTW, when I import several articles, I sometimes lose the links to internal pages inside articles ("go to page 3"). Is that a known issue?
Updating articles is the cure, but it's a pain when I have to do that 25 times...

Any way to have two DVD SP projects open at the same time?

Hi
Since it is likely that I'm going to re-build all the menues in my PAL DVD in a new NTSC project, I'd like to know if there is any way for me to have two separate DVD Studio Pro projects open at the same time. That way I can easily check and copy location coordinates for the buttons, copy text, etc, etc.
When I open my new project when the old still open, DVD SP just closes the old and opens the new project.
If it was possible, it would make everything much easier for me, since I have 15 menues to re-create
Thanks!
Natasha
Mac OS X (10.4.9)

If you just require a visual reference, you can take screen grabs of your first project and open them in Preview...
Open your project, and press Shiftcommand(apple)4 and the pointer turns into a little cross-hair.... you then click-hold & drag a marquee around the section of the screen you need as reference, then when you release the mouse button a screen grab is taken of that portion you selected.
It will be saved to your desktop as 'Picture 1'
you can repeat this for different sections of the project (picture 2, picture 3 etc), and open them in preview.
Not an ideal solution, but might be of help.

Whether two session with for update at the same time will wait for another?

Will this scenario happen?
One session executes: select ... for update/select ... for update nowait
The other session also executes: select ... for update/select ... for update nowait
Two sessions happens at the same time unluckily. Whether they will all stand by because of "for update" or quit immediately because of "nowait"?
Thx a lot.

HiddenName wrote:
This situation is called 'a deadlock'. Oracle will automaticaly detect a deadlock. One of the statements will fail with ORA-00060 deadlock detected;
No, it's not.
A deadlock is when sesson-A has a lock on something that session-B needs in order to continue, and at the same time, session-B has a lock on something that Session-A needs in order to continue. They BOTH have something the other needs.
In the OP's case, at least as he described it, it is simple serialization. The one with the lower scn will go, then the next.
PS.
Why don't you try? You can setup a small table with some records, open 2 sessions to the same database and for example issue UPDATE statements:
session 1: update where id=1
session 2: update where id=2
session 1: update where id=2 - this will hang waiting for session 2 to commit and free lock
session 2: update where id=1 - ORA-00060
You may also read about deadlocks in chapter on "Data Concurency and Consistency" of "Oracle Concepts'.

Two or more people editing at the same time

Dear All,
I am planning to purchase FCP Server, and I am just in a very beginning of consideration.
Immediately, I am wondering if FCP Server can let two or more people editing on the same project at the same time.
I know it has Check-in function, and it seems to me that it just takes the project to another computer to do editing. What if another person wants to do editing on the same project?
Also, if it allows us many people to do editing on the same project, can we save the project at the same time on the same computer installed FCP Server?
Please advise.
Many thanks in advance.
King

In Final Cut Server (FCSvr) checking out a Final Cut Pro project (FCProj) creates a copy of the project file at a location you specify saving it to on your local computer. When you check out a FCProj, the project asset is locked and cannot be modified by other users. Additionally, every media asset that is used in the project is locked from being modified by other users.
However in a you're trying to have multiple users work on and edit the same project, I'd suggest start by duplicating the FCProj asset within FCSvr. Maybe start with a master capture / digitize project that contains all the media needed to work on by both editor. This will allow for multiple editors to have access to the same project media assets. In any scenario where multiple editors are collaborating, I'd suggest have them also work on separate project file and maybe split / divi up the work, based on scene, act etc.
Sequences can be easily merge between project later.
Hope this helps.
Nicholas Stokes
XPlatform Consulting
< Edited by Host >

Two clips overlayed and playing at the same time..

Hello!
Is there anyway to play two clips at the same time?
The same way cross-disolve layers the images??
a thousand thanks!!

Hi (again)
I figured it out.. So if anyone is interested, all you have to do is go to Modify and then change the composite mode to Overlay. Then it has to be rendered. Piece of cake!!
Thanks!

Streaming two or more flv videos at the same time

Hi,
I am working on a site that is intended to stream two or more flv simultaneously. The slightly different header clip should renew on entry to each page.
When I publish the fla file it plays as intended. When I upload the swf file to the web only one of the videos are playing back.
It does not matter if I import the video to a timeline, or stream it progressively from the server. Both clips are uploaded.
I am using CS3 and AS3.
http://www.doctorhoover.com/marcia/test7.html
Anyone??
ggaarde

Hi!!! hey dogHouseJim!! Could you please post a sample of your fourMovies.swf code to know how you do it?? It would be necessary for me to know how to do it. I'm working in an application that has got two flvPlayback components working at the same time but the main video pauses too many times because the other one is running too. Please help me!!! I post here my code (The main flv is croma_01intro ---> it doesn't work too far, I'm a beginner.. ) Thanks in advance for your help!!!!
---CODE---
import com.hagane.MHU.Timer;
var timeKeeper : Timer = new Timer();
video_tmp="flvs/croma_01intro.flv";
video_tmp2="flvs/presentacion720.flv";
var conexion2:NetConnection = new NetConnection();
var conexion:NetConnection = new NetConnection();
conexion2.connect(null);
conexion.connect(null);
var stream2:NetStream = new NetStream(conexion2);
var stream:NetStream = new NetStream(conexion);
mi_video2.attachVideo(stream2);
mi_video.attachVideo(stream);
stream.play(video_tmp);
//aseguramos 10 seg de reproduccion
stream.setBufferTime(4);
loadMovie("cargas.swf",cargas);
var n_veces = 0;
var prueba = 0;
this.onEnterFrame = function() {
//obtengo el porcentaje
var valor1:Number = Math.round(stream.bytesLoaded/stream.bytesTotal*100);
conexion1 = new LocalConnection();
conexion1.send("conectar", "estado_carga", valor1);
delete conexion1;
prueba = stream.time;
if ((valor1>=12)&&(prueba>=2)) {
delete this.onEnterFrame;
stream2.play(video_tmp2);
stream2.setBufferTime(15);
stream2.pause();
var intervalID_mc : Number = timeKeeper.intervalCall(2000, 0, lanzaEstadisticos);
n_veces = n_veces+1;
//funcion para saber que el flv termino
stream.onStatus = function(infoObject) {
    if (infoObject.code == "NetStream.Play.Stop") {
       //trace("video terminado");
    gotoAndPlay(25);
//if((infoObject.code=="NetStream.Play.Start")&&(n_veces==0)){
//stream2.play(video_tmp2);
//stream2.setBufferTime(4);
//stream2.pause();
//var intervalID_mc : Number = timeKeeper.intervalCall(5000, 0, lanzaEstadisticos);
//n_veces = n_veces+1;
function lanzaEstadisticos(Void):Void {
stream2.play(video_tmp2);
timeKeeper.clearIntervalCall(intervalID_mc);
stop();

Two effects concurrently? all together. at the same time?

Similar Messages

Maybe you are looking for