Two exactly equal t410 laptops but very different CPU performance
Hi all,
Hope anyone in this forum can help me with this. I have never seem something similar before.
I have two T410 laptops with exactly the same configuration:
- Intel Core i5 M520 2,4Ghz
- 4GB
- Same exact bios version and date
- One of them has a fingerprint reader, the other does not
The problem is that running CPU Passmark on both laptops I get 2755 on one (what is quite similar to the ranks posted in the page) and 965 in the other.
Yep, the second is about 3x slower. And it is not only slower than its brother the t410 but also slower
If I swap their hard disks I get the same results so it is not related to the software they are running.
I have loaded bios defaults several times (F9), but it looks like it does not really change all the values so I checked all them manually and I would say they are equal.
¿Does anybody know what is happening to the slow unit? Thanks in advance!
Solved!
Go to Solution.
Same graphics? Size of power supplies? Is either battery bad? Are they both real Lenovo batteries?
Similar Messages
-
How to sync two IPhone with one PC , but with different applications
How to sync two IPhone with one PC , but with different applications ?
We have two IPhones , but one PC , we want to sync separately , is that possible ?Absolutely, connect each phone, select what content you want on each phone, then hit the sync button. iTunes will keep everything straight, by device, upon subsequent syncs, including separate backups.
-
2 Different iPhones, both 3G but very different reception
I live in a condo with wireless router Netgear. Reception in MBR differs greatly between the two phones my wife and I own. With hers (bought for .01 from ATT.
Hers 8mg, mine is 16mg and bought from ATT for $59.00,
With hers get 2 bard in room on WiFi connection. On mine I barely get 3G, sometimes goes to E. Try to go online and some sites, "no connection",
Why such a difference when phones are the same and have most recent updates?Sync the phones to the same computer... or just set up iCloud with the same AppleID on both devices.
-
XML select query causing very high CPU usage.
Hi All,
In our Oracle 10.2.0.4 Two node RAC we are facing very high CPU usage....and all of the top CPU consuming processes are executing this below sql...also these statements are waiting for some gc wiat events as shown below.
SELECT B.PACKET_ID FROM CM_PACKET_ALT_KEY B, CM_ALT_KEY_TYPE C, TABLE(XMLSEQUENCE ( EXTRACT (:B1 , '/AlternateKeys/AlternateKey') )) T
WHERE B.ALT_KEY_TYPE_ID = C.ALT_KEY_TYPE_ID AND C.ALT_KEY_TYPE_NAME = EXTRACTVALUE (VALUE (T), '/AlternateKey/@keyType')
AND B.ALT_KEY_VALUE = EXTRACTVALUE (VALUE (T), '/AlternateKey')
AND NVL (B.CHILD_BROKER_CODE, '6209870F57C254D6E04400306E4A78B0') =
NVL (EXTRACTVALUE (VALUE (T), '/AlternateKey/@broker'), '6209870F57C254D6E04400306E4A78B0')
SQL> select sid,event,state from gv$session where state='WAITING' and event not like '%SQL*Net%';
SID EVENT STATE
66 jobq slave wait WAITING
124 gc buffer busy WAITING
143 gc buffer busy WAITING
147 db file sequential read WAITING
222 Streams AQ: qmn slave idle wait WAITING
266 gc buffer busy WAITING
280 gc buffer busy WAITING
314 gc cr request WAITING
317 gc buffer busy WAITING
392 gc buffer busy WAITING
428 gc buffer busy WAITING
471 gc buffer busy WAITING
518 Streams AQ: waiting for time management or cleanup tasks WAITING
524 Streams AQ: qmn coordinator idle wait WAITING
527 rdbms ipc message WAITING
528 rdbms ipc message WAITING
532 rdbms ipc message WAITING
537 rdbms ipc message WAITING
538 rdbms ipc message WAITING
539 rdbms ipc message WAITING
540 rdbms ipc message WAITING
541 smon timer WAITING
542 rdbms ipc message WAITING
543 rdbms ipc message WAITING
544 rdbms ipc message WAITING
545 rdbms ipc message WAITING
546 rdbms ipc message WAITING
547 gcs remote message WAITING
548 gcs remote message WAITING
549 gcs remote message WAITING
550 gcs remote message WAITING
551 ges remote message WAITING
552 rdbms ipc message WAITING
553 rdbms ipc message WAITING
554 DIAG idle wait WAITING
555 pmon timer WAITING
79 jobq slave wait WAITING
117 gc buffer busy WAITING
163 PX Deq: Execute Reply WAITING
205 db file parallel read WAITING
247 gc current request WAITING
279 jobq slave wait WAITING
319 LNS ASYNC end of log WAITING
343 jobq slave wait WAITING
348 direct path read WAITING
372 db file scattered read WAITING
475 jobq slave wait WAITING
494 gc cr request WAITING
516 Streams AQ: qmn slave idle wait WAITING
518 Streams AQ: waiting for time management or cleanup tasks WAITING
523 Streams AQ: qmn coordinator idle wait WAITING
528 rdbms ipc message WAITING
529 rdbms ipc message WAITING
530 Streams AQ: waiting for messages in the queue WAITING
532 rdbms ipc message WAITING
537 rdbms ipc message WAITING
538 rdbms ipc message WAITING
539 rdbms ipc message WAITING
540 rdbms ipc message WAITING
541 smon timer WAITING
542 rdbms ipc message WAITING
543 rdbms ipc message WAITING
544 rdbms ipc message WAITING
545 rdbms ipc message WAITING
546 rdbms ipc message WAITING
547 gcs remote message WAITING
548 gcs remote message WAITING
549 gcs remote message WAITING
550 gcs remote message WAITING
551 ges remote message WAITING
552 rdbms ipc message WAITING
553 rdbms ipc message WAITING
554 DIAG idle wait WAITING
555 pmon timer WAITINGI am not at all able to understand what this SQL is...i think its related to some XML datatype.
Also not able to generate execution plan for this sql using explain plan- getting error(ORA-00932: inconsistent datatypes: expected - got -)
Please help me in this issue...
How can i generate execution plan?
Does this type of XML based query will cause high GC wiat events and buffer busy wait events?
How can i tune this query?
How can i find that this is the only query causing High CPU usage?
Our servers are having 64 GB RAM and 16 CPU's..
OS is Solaris 5.10 with UDP as protocol for interconnect..
-YasserI found some more xml queries as shown below.
SELECT XMLELEMENT("Resource", XMLATTRIBUTES(RAWTOHEX(RMR.RESOURCE_ID) AS "resourceID", RMO.OWNER_CODE AS "ownerCode", RMR.MIME_TYPE AS "mimeType",RMR.FILE_SIZE AS "fileSize", RMR.RESOURCE_STATUS AS "status"), (SELECT XMLAGG(XMLELEMENT("ResourceLocation", XMLATTRIBUTES(RAWTOHEX(RMRP.REPOSITORY_ID) AS "repositoryID", RAWTOHEX(DIRECTORY_ID) AS "directoryID", RESOURCE_STATE AS "state", RMRO.RETRIEVAL_SEQ AS "sequence"), XMLFOREST(FULL_PATH AS "RemotePath"))ORDER BY RMRO.RETRIEVAL_SEQ) FROM RM_RESOURCE_PATH RMRP, RM_RETRIEVAL_ORDER RMRO, RM_LOCATION RML WHERE RMRP.RESOURCE_ID = RMR.RESOURCE_ID AND RMRP.REPOSITORY_ID = RMRO.REPOSITORY_ID AND RMRO.LOCATION_ID = RML.LOCATION_ID AND RML.LOCATION_CODE = :B2 ) AS "Locations") FROM RM_RESOURCE RMR, RM_OWNER RMO WHERE RMR.OWNER_ID = RMO.OWNER_ID AND RMR.RESOURCE_ID = HEXTORAW(:B1 )
SELECT XMLELEMENT ( "Resources", XMLAGG(XMLELEMENT ( "Resource", XMLATTRIBUTES (B.RESOURCE_ID AS "id"), XMLELEMENT ("ContentType", C.CONTENT_TYPE_CODE), XMLELEMENT ("TextExtractStatus", B.TEXT_EXTRACTED_STATUS), XMLELEMENT ("MimeType", B.MIME_TYPE), XMLELEMENT ("NumberPages", TO_CHAR (B.NUM_PAGES)), XMLELEMENT ("FileSize", TO_CHAR (B.FILE_SIZE)), XMLELEMENT ("Status", B.STATUS), XMLELEMENT ("ContentFormat", D.CONTENT_FORMAT_CODE), G.ALTKEY )) ) FROM CM_PACKET A, CM_RESOURCE B, CM_REF_CONTENT_TYPE C, CM_REF_CONTENT_FORMAT D, ( SELECT XMLELEMENT ( "AlternateKeys", XMLAGG(XMLELEMENT ( "AlternateKey", XMLATTRIBUTES ( H.ALT_KEY_TYPE_NAME AS "keyType", E.CHILD_BROKER_CODE AS "broker", E.VERSION AS "version" ), E.ALT_KEY_VALUE )) ) ALTKEY, E.RESOURCE_ID RES_ID FROM CM_RESOURCE_ALT_KEY E, CM_RESOURCE F, CM_ALT_KEY_TYPE H WHERE E.RESOURCE_ID = F.RESOURCE_ID(+) AND F.PACKET_ID = HEXTORAW (:B1 ) AN
D E.ALT_KEY_TYPE_ID = H.ALT_KEY_TYPE_ID GROUP BY E.RESOURCE_ID) G WHERE A.PACKET_ID = HEXTORAW (:B1
SELECT XMLELEMENT ("Tagging", XMLAGG (GROUPEDCAT)) FROM ( SELECT XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES (CATEGORY1 AS "categoryType"), XMLAGG (LISTVALUES) ) GROUPEDCAT FROM (SELECT EXTRACTVALUE ( VALUE (T), '/TaggingCategory/@categoryType' ) CATEGORY1, XMLCONCAT(EXTRACT ( VALUE (T), '/TaggingCategory/TaggingValue' )) LISTVALUES FROM TABLE(XMLSEQUENCE(EXTRACT ( :B1 , '/Tagging/TaggingCategory' ))) T) GROUP BY CATEGORY1)
SELECT XMLCONCAT ( :B2 , DI_CONTENT_PKG.GET_ENUM_TAGGING_FN (:B1 ) ) FROM DUAL
SELECT XMLCONCAT (:B2 , :B1 ) FROM DUAL
SELECT * FROM EQ_RAW_TAG_ERROR A WHERE TAG_LIST_ID = :B2 AND EXTRACTVALUE (A.RAW_TAG_XML, '/TaggingValues/TaggingValue/Value' ) = :B1 AND A.STATUS = '
NR'
SELECT RAWTOHEX (S.PACKET_ID) AS PACKET_ID, PS.PACKET_STATUS_DESC, S.LAST_UPDATE AS LAST_UPDATE, S.USER_ID, S.USER_COMMENT, MAX (T.ALT_KEY_VALUE) AS ALTKEY, 'Y' AS IS_PACKET FROM EQ_PACKET S, CM_PACKET_ALT_KEY T, CM_REF_PACKET_STATUS PS WHERE S.STATUS_ID = PS.PACKET_STATUS_ID AND S.PACKET_ID = T.PACKET_ID AND NOT EXISTS (SELECT 1 FROM CM_RESOURCE RES WHERE RES.PACKET_ID = S.PACKET_ID AND EXISTS (SELECT 1 FROM CM_REF_CONTENT_FORMAT CF WHERE CF.CONTENT_FORMAT_ID = RES.CONTENT_FORMAT AND CF.CONTENT_FORMAT_CODE = 'I_FILE')) GROUP BY RAWTOHEX (S.PACKET_ID), PS.PACKET_STATUS_DESC, S.LAST_UPDATE, S.USER_ID, S.USER_COMMENT UNION SELECT RAWTOHEX (A.FATAL_ERROR_ID) AS PACKET_ID, C.PACKET_STATUS_DESC, A.OCCURRENCE_DATE AS LAST_UPDATE, '' AS USER_ID, '' AS USER_COMMENT, RAWTOHEX (A.FATAL_ERROR_ID) AS ALTKEY, 'N' AS IS_PACKET FROM EQ_FATAL_ERROR A, EQ_ERROR_MSG B, CM_REF_PACKET_STATUS C, EQ_SEVERITYD WHERE A.PACKET_ID IS NULL AND A.STATUS = 'NR' AND A.ERROR_MSG_ID = B.ERROR_MSG_ID AND B.SEVERITY_I
SELECT /*+ INDEX(e) INDEX(a) INDEX(c)*/ XMLAGG(XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES ( G.TAG_CATEGORY_CODE AS "categoryType" ), XMLELEMENT ("TaggingValue", XMLATTRIBUTES (C.IS_PRIMARY AS "primary", H.ORIGIN_CODE AS "origin"), XMLAGG(XMLELEMENT ( "Value", XMLATTRIBUTES ( F.TAG_LIST_CODE AS "listType" ), E.TAG_VALUE )) ) )) FROM TABLE (CAST (:B1 AS T_TAG_MAP_HIERARCHY_TAB)) A, TABLE (CAST (:B2 AS T_ENUM_TAG_TAB)) C, REM_TAG_VALUE E, REM_TAG_LIST F, REM_TAG_CATEGORY G, CM_ORIGIN H WHERE E.TAG_VALUE_ID = C.TAG_VALUE_ID AND F.TAG_LIST_ID = E.TAG_LIST_ID AND G.TAGGING_CATEGORY_ID = F.TAGGING_CATEGORY_ID AND H.ORIGIN_ID = C.ORIGIN_ID AND C.ENUM_TAG_ID = A.MAPPED_ENUM_TAG_ID GROUP BY C.IS_PRIMARY, H.ORIGIN_CODE, G.TAG_CATEGORY_CODE START WITH A.MAPPED_ENUM_TAG_ID = HEXTORAW (:B3 ) CONNECT BY PRIOR A.MAPPED_ENUM_TAG_ID = A.ENUM_TAG_ID
SELECT /*+ INDEX(e) */ XMLAGG(XMLELEMENT ( "TaggingCategory", XMLATTRIBUTES ( G.TAG_CATEGORY_CODE AS "categoryType" ), XMLELEMENT ( "TaggingValue", XMLATTRIBUTES (C.IS_PRIMARY AS "primary", H.ORIGIN_CODE AS "origin"), XMLAGG(XMLCONCAT ( XMLELEMENT ( "Value", XMLATTRIBUTES ( F.TAG_LIST_CODE AS "listType" ), E.TAG_VALUE ), CASE WHEN LEVEL = 1 THEN :B4 ELSE NULL END )) ) )) FROM TABLE (CAST (:B1 AS T_TAG_MAP_HIERARCHY_TAB)) A, TABLE (CAST (:B2 AS T_ENUM_TAG_TAB)) C, REM_TAG_VALUE E, REM_TAG_LIST F, REM_TAG_CATEGORY G, CM_ORIGIN H WHERE E.TAG_VALUE_ID = C.TAG_VALUE_ID AND F.TAG_LIST_ID = E.TAG_LIST_ID AND G.TAGGING_CATEGORY_ID = F.TAGGING_CATEGORY_ID AND H.ORIGIN_ID = C.ORIGIN_ID AND C.ENUM_TAG_ID = A.MAPPED_ENUM_TAG_ID GROUP BY G.TAG_CATEGORY_CODE, C.IS_PRIMARY, H.ORIGIN_CODE START WITH A.MAPPED_ENUM_TAG_ID = HEXTORAW (:B3 ) CONNECT BY PRIOR A.MAPPED_ENUM_TAG_ID = A.ENUM_TAG_IDBy observing above sql queries i found some hints forcing for index usage..
I think xml schema is created already...and its progressing as you stated above. Please correct if i am wrong.
I found all these sql from AWR report and all of these are very high resource consuming queries.
And i am really sorry if i am irritating you by asking all stupid questions related to xml.
-Yasser
Edited by: YasserRACDBA on Nov 17, 2009 3:39 PM
Did syntax allignment. -
Why will my iPad 2 not recognize any iPod cables? I have tried two different cables in both the wall and in my laptop, but it will not register that it is receiving power, nor will the laptop recognize that they are connected.
Crizzo is right, the best way to charge is with the included power block. That said, the USB cords are interchangable as far as an of us know. (just not power bricks, iPhone and iPod bricks put out 5W of power, the iPad wants 10W and will always say 'not charging' if plugged into less power than it requires even though it will charge, just very slowly)
If you have tried to charge your iPad - with the iPad charger - with multiple cables and multiple computers and get no joy then it's time to head to the apple store and have them check it out. The 30 pin USB port can go bad - mine did - and it's a manufacturer's defect (unless there's any sort of obvious damage) and should be covered under the warranty; -
Two very different results using the same settings (H.264 / Quicktime Pro)
I’m a bit confused, I have used Quicktime Pro (v7.1) to encode DV into H.264 for iPod and this particular video is 18 minutes long and came out looking very good with the following settings;
VIDEO: H.264 at 200kbps, Baseline Profile, 25fps, Auto Key Frames, 320x240 or 640x480, Multipass Best quality encoding.
AUDIO: AAC Audio at 96kbps, 24kHz sampling freq, Stereo.
However here is the twist…
When I use the same exact settings to encode just the 30 second opener (from the 18 minute video) the encoded opener looks bad and blocky!
Why? Same settings would make you assume that you should get a same or similar result, or am I wrong?
The reason I have tried encoding this 30 second opener is that I am trying to work out which settings work best on the iPod (another issue) and I don’t want to spend hours test encoding the full 18 minute video, as you know H.264 is SLOW to encode!
So can anyone help in regard to two very different results using the same settings?
Regards,
J
PC Windows XPAlvin,
Is it a commercially-released or home-burned CD?
If it's commercially-released, try "encouraging" the recalcitrant computer by using the iTunes Advanced menu > Get CD Track Names command when it shows Audio CD.
If it's home-burned, you will find that only the computer that actually burned the disc will know what's on it. The information won't be transferred to another computer.
Let us know which, if either, of these situations applies to you. -
I have rented two movies on my laptop and they will not completely download..it shows that they are theere but when i try to watch them on my laptop or my ipad it wont open up???? help
Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals. -
My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/
Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?
-
How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.
Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup. -
Can I have two apple id's on the same iPad. Example me and my spouse want to share the iPad but have different id's
iOS does not support multiple users like a desktop OS does.
You can use a web interface to your respective email accounts
to keep things separate; but there is no provision for otherwise
separating photos, media, etc.
If you wish, you can contact Apple to let them know of your desire:
www.apple.com/feedback -
Two ODSs share the same InfoSource but with different updata mode load?
We've got two different ODSs (ODS1 and ODS2) for two respective clients (client 1 and client 2). Client 1 has already going alive and in the InfoPackage, we only pick up ODS1 (Client 1) as feeding target and we have conducted initial load and several times of Delta loads for ODS1 (data load daily). But now we are going to start to load data to ODS2 (Client 2) and at the same time we will have to continue our delta load to ODS1.
It could not be possible that the two ODSs will be feeded data with different pace (ODS1: continue delta load, ODS2: initial load) if they share the same InfoSource. Then what's the best way to resolve this issue?
Thankshi Pradip,
Tell you a bad news that the solution doesn't work on two of the EBP (a source system which is similar to R3, we've got 4 EBP ODS/InfoSources, but two of the four don't work with the last step listed below) ODSs/InfoSources. The steps I took on production are:
1. Conduct Full Repair data load to ODS2;
2. Delete init option of ODS1 from Scheduler menu;
3. Run Init without data transfer to set delta pointer for both ODS1 and ODS2.
But the last step to run Init without data transfer has taken 1 whole day and eventually becomes red since it takes so long time to set delta pointer.
When I said our solution worked is that I conducted the test on our GL ODS and the Init without data transfer took about 1 hour to finish.
Also when we conduct the last step to do the Init without data transfer to click Start button to set pointer, a msg box titled "Activate ODS Data" pops up saying that "No requests have been selected for activation. Do you want to make a selection, or activate all the requests?" with buttons "Activate all requests", "Select requests" and "Cancel". If clicking the button "Select requests", another msg box pops up to prompt to input a Date range, we didn't input any date range, just click continue, then the Init without data transfer will run forever!
Thank
Message was edited by: Kevin Smith -
Do I need a different apple ID for each device I have? I have two iPads and an iPod but I can only make purchases with the first one I purchased. It tells me the security questions are wrong but I know they are not because I wrote them down. I have also reset them and my password once. Please help if you can
You can not login into iTunes or the App Store using VPP credentials. You must purchase all apps/book/etc. from the VPP website. Then you can redeem the codes thru itunes/app store or import the codes thru apple configurator. Here is the url for the VPP website: https://volume.itunes.apple.com/WebObjects/MZFinance.woa/wa/login?cc=us
(It will not affect any of the apps you already have but the id can only be used for VPP.)
Cheers,
Alec -
Ipod touch won't sync on laptop but different ipod will sync
I'm having some issues trying to sync my wife's ipod touch. She's had it for a couple years and we haven't had any issues with it before. She purchased a couple songs recently and when we connected the ipod a message came up saying there was a software update available for the ipod so we downloaded the update. After we did that her ipod will charge when we connect it but it won't register that it's connected so we can't sync it. Sometimes an error message will pop up saying something about not being able to connect.
I have searched online and tried everything suggested but nothing works. I downloaded the latest itunes update, uninstalled and reinstalled itunes, tried a different usb cable and different usb port and non of that worked. I even hooked up my ipod nano to see if it was a computer issue or ipod issue, my ipod syncd perfectly fine so it's gotta be a problem with her ipod.
I've also restarted the ipod, nothing will get it to sync. The ipod will still work and I've thought about trying to sync it to our my laptop but if I do that then I risk her losing all of her music on her ipod and being stuck with mine if we can't get it to sync with her computer.
I'm all out of ideas, anyone encounter this problem? Also if I bring it into the Apple Store is there anything they can do to try and fix it?
Thank you.First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!
Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness. -
Hi Everyone,
I'm just about to connect up two SBS 2011 Servers with the same server name but on different subnets & domains over a VPN.
So for example both servers will have the name Server01, one would have an ip address of 192.168.85.5, the other 192.168.86.5, they both then would be connected over a VPN.
Can anyone foresee any issues with this configuration, like DNS & DHCP requests, adding new machines to the domain, mapping drives etc.
Many thanks,
NickHi Larry & Strike First,
Thank you for your responses. I understand that this is an unusual situation. Basically I've recently taken over the IT support for this client. The client has just had a new phone system installed
& are asking if they can speak to each office internally, which can easily be done once I setup the VPN.
However I noticed whilst looking at this further that the Server names are the same, hence my question?
Am I right in saying that providing the workstations have a trust relationship with their own domain controllers through their individual domains on separate subnets, that hopefully there shouldn't be any DNS issues between the two domains and Servers?
I could build a new VM if you feel it would be better practice to do so?
Many thanks for your assistance,
Nick
Maybe you are looking for
-
Power button no longer works??
I have a macbook pro retina dis late 2013, when i first got the laptop the power button worked great, press it and it would give me the option to, restart/sleep/shutdown. Now since my 1yo boy started pressing buttons and caught me off guard it no lon
-
Excuse me for asking a question about photo printers here, but I could not find a place in the Apple Discussions form for printers. I'm thinking about buying an Epson R1900 printer since my primary selection criteria is the quality of glossy photogra
-
Which is better C++/JAVA?
Could someone give me an explaination as to why C++/OpenGL is better than Java when trying to program 3D objects?? Also could you plsss tell me the pros and cons for each one?? Though i was thinking of using JAVA. thx
-
Delivery Notification as per the Due date to supplier
Hi All, My client requirment is before delivery of PO quantity vendor get reminder throuh mail delivery notification on due date of PO quantity (before 4 days reminder) so kindly let me know how to configur in SAP . Regards Santosh P
-
After 10.5.6 Upgrade, Mail does nothing useful
So I decided to u/g my MacBook Pro to Leopard 10.5.6 today and followed all the usual precautions. Everything seemed to have gone swimmingly until I fired up Mail. A message appears that mailboxes and such have to be converted (or something to that e