Two fast motion effects on one clip

Ive been trying to make a claymation movie right. So I put fast motion onto it, but it wasnt fast enough so I tryed to make it faster. I clicked on the clip with the fast motion on it and made it faster. I can preview what it would look like faster, but I can't apply it. What should I do?

You can make it faster only once.
A workaround is to apply the fast effect, then undo it and do a save: the rendered clip is moved to the Finder trash. Import it back to the project, THEN you can re-apply the fast effect to it again.
This trick doesn't properly work with interlaced input slo-mo because the clip is deinterlaced only when the project is sent to tape/iDVD (you can do a fake export to force this, though). Not doing a deinterlace will produce flicker on a TV.
Or, make the fast-motion effect with JES Deinterlacer:
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#speed

Similar Messages

Fast motion effect

I am wondering how to make fast motion effect. The idea is to make from long video appr. 40 min (it is processing of printinting on 3d printer) short video. But it should be visible how it "grow" layer by layer.I tried already normal fast forward. Looks bad. Is it even possible? The camera was stable on one place, so now i need just to make video faster.
I hope you understand, what I mean

I want to show how it grow fast layer by layer, but it look like pause and after its bigger for few cm. The process is not that obvious. I want to make it like in documental movie like "how it work" or "how it was made".

How to apply multiple effects on one clip

Here's a simple question, so I guess there's got to be a simple solution. Is it possible to have more than just one effect on one clip? If yes, how can I do that? I've searched the iMovie help, but it didn't give me any answer.

No, you cannot apply more than one effect at a time in iMovie '09.
However, you can always adjust Video Levels, Exposure, Brightness, Contrast, Saturation, etc. in Inspector.

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

Video editing 'special effects': can you apply a fast/slow motion effect to video clips?

I haven't been able to find a way to create the effects of fast or slow motion in the video clips. Is there a way to do this? If not, please consider adding it in the full version - I use these effects alot when editing videos.
Thanks!

Hi,
When working with a video layer (clip) in the Timeline panel, either 1.) Context-click on the selected clip (right-click or ctrl-click for mac) or 2.) Click on the flyout button located at the top right corner of the clip.
The "Speed" option should show up in the flyout menu. This is only available for video layers. If you're working with still or smart objects the speed option is not available.

Two slow motion parts in one video?

Hi!
How do I have 2 slow motion parts in one video? I have the iPhone 5s and it only lets me slow mo once. Is there any app that does this? Thanks!

I don't use iMovie (I am a FCP X guy :-)) and in fact only have iMovie '09 in mac, but upon opening it was not hard to find (see the picture below). Basically, select the clip, press the letter "i" to open the inspector and drag the slider to make run slower (or faster).
I imagine it would be the same in a more recent version.

Multiclip Edit Needing to Modify Motion Properties of One Clip

Hi all,
I'm working on a multiclip 3 camera edit. One of cameras had a black bar along the left side of the screen the entire time. To overcome this problem, I have to zoom to 104%. Is there a way to make this modification hold when using multiclip, or do I have to go through and modify the motion tab every time I use that angle?
Thanks,
Blue

Finish your cut first. Right-click or ctrl-click one of your clips with the motion properties adjusted. Then hit cmd+f in your timeline to find all clips matching that specific angle you want to zoom. Paste the attributes of that one clip onto all the other clips with the same angle number.

Applying motion effects to multiple clips

Another one that's been bothering me... in Photoshop I can apply effects from one layer to another to achieve the same look and save massive amounts of time.
Is there any way to do the same to clips and images in FCE 3.5. It would make doing 'Ken Burns' effects much less time consuming.
Thanks
CRaig

Copy the clip and use the paste attributes function.

Connect two 7344 motion controllers in one PC

Can I use two NI - PCI 7344 motion controllers in one PC. My application requires 6 axis and hence I want to use two PCI 7344 motion controllers. I am already using one. Can I configure another one in the same PC to add more axes to my current system. If yes, then how to configure the other one, so that it acts as the 5th and 6th axes in my system. I'm using LabVIEW 7.1 in my application.
Regards,
Giridhar Rajan
Automation Engineer
Cruiser Controls
Mumbai, India

You can add as many PCI-7344 boards to your PC as you want. The only
limitation is the number of PCI-slots available. In your software you
need to control the axes from the second PCI-7344 seperately from the
axes of the first one. That means that there are no built in methods to
start the axes on two or more boards synchronously. If this is not a
feature that you need then everything is quite straight forward. If you
need tight synchronization you might write an onboard program that's
running on the second board and that waits e. g. for a breakpoint
signal to be generated by the first board immediately after the axes
are started.
Assumed that you need tight motion synchronization with the additional
axes a better choice would be to use one PCI-7356 (6 axes) or a
PCI-7358 (8 axes) instead of two PCI-7344. The 735x boards are pin- and
software-compatible to the 734x boards. You could return your 7344 to
NI and buy a 735x board with a fair discount ("hardware upgrade"). If
this is an option for you please contact your local NI branch.
Best regards,
Jochen Klier
National Instruments Germany

Slow motion/fast motion effect

Hi guys
I'm making my first music video for a song I made. It'll be my first time learning and using a video production software, and I'm not sure if iMovie will be able to handle these type of effects or if I should invest in Final Cut Pro X instead.
Basically I want this type: https://youtu.be/BYbJmQj5VkE?t=50s
Where I can speed up the pace of the video faster than it's normal speed. Is iMovie capable of doing this? Would I also be able to do the opposite whereas I could slow down a video less than it's normal speed? slow motion I'm sure it's called.
Please let me know, Thank You.

iMovie can speed up or slow-down video, read the Manual:
http://help.apple.com/imovie/mac/10.0.6/?lang=en#/mov6c442b2eb
For sure, you can not adjust precisely as you can do in FCPX ...
cbrec wrote:
… I'm making my first music video for a song I made. It'll be my first time learning and using a video production software,…
High ambitiions, but: why not?
You do know, that the effect you linked to, asks for a special way how you record teh scene?
The clip is speed-up, but singer is lip-sync - that is not done by software/post-production!
While recording, you need a slowed-down version of your music, and the singer has to 'sing' to THAT sloooow version - which looks (and sounds) incredible silly on set
Then, in the edit-room, the video gets accelerated to 'normal', which makes the background moving faster........
Here comes FCPX into the game: there you just drag'n-squeeze the re-timed clips to make it fit to music - done.
iMovie is limited to a few setting.
Hint: Make some tests in the backyard, before you try the Big Thing!
fingers-crossed, happy movie making!

Plug-In for slow motion/fast motion effects?

The fact that iMovie '08 does not give us the ability to slow down, speed up, or rewind video kinda stinks. I know that iMovie has it, now, but I don't want to spend the money just for those effects.
Is there a simple plug-in that makes this possible in iMovie '08?
*I want only safe downloads. I will only consider downloading it if you have done it first and there were no viruses or anything.

Doug0301 wrote:
.. Is there a simple plug-in that makes this possible in iMovie '08?
no plug-ins for iM08/09 .. Apple doesn't offer an official API for that..
perhaps, you like the workflow, described on my site, using a free 3rd party tool... :
http://karsten.schluter.googlepages.com/slowmowithim08

Applying One effect to several clips (not tracks!)

i have one track with about 40 clips in it of different cut up audio. i want to apply one effect to several different clips at once. how do i do that?
i know how to apply the one effect to one clip, but if i try and shift click four different clips, and then go to add an effect to it, the effects are grayed out
and i really don't want to go into each clip, add an effect, adjust it and save it for every clip.
is there an easier way?

There are a few ways to do this. The simple way is to apply the filter to one clip. Open it into the viewer and change the parameters as you like. Select all the other clips and drag the filter name from the viewer onto the other clips. They all have the same setting.

Slow/fast motion?

I am a super beginner with imovie but im getting pretty good at it and im almost done with my movie but all i have left to do is make something in slowmotion and something in fast motion. does any one know how to do that and can explain 2 me how?

That is not possible within iMovie '08. Here is one way of doing it:
- Select just the section of the video you want to slow down, and export it as a Quicktime movie.
- Download and install iMovie '06 from Apple. It's a free download for iMovie '08 owners.
- Create a new project, import the clip, add it to the timeline.
- Find the slow motion effect, adjust the speed of your clip.
- Export result back out.
- Import edited clip back into iMovie '08.
- Splice it into your iMovie '08 project.
There will be some quality loss as you will go through some format conversions along the way.

Slow motion / fast motion in Premiere Elements 13

I read that in Premiere Elements 13 fast motion (and I think also slow motion) ist removed. Is that correct. And if yes: Is there any workaround available?

rr
Thanks for the reply.
Great information. If you have been using Ctrl+R, that is the keyboard shortcut that brings up the Time Stretch dialog.
Time Stretch (use of the Ctrl+R) has not been removed from Premiere Elements 13 Expert workspace.
Like Premiere Elements 11, Time Stretch is found in the Expert workspace and not in the Quick workspace.
When you use the keyboard shortcut Ctrl+R, I get Time Stretch dialog from where I can create the slow or fast motion effect in the selected clip.
The following relates to Premiere Elements Timelapse Capture (Stop Motion) which has been removed from
Premiere Elements 13 as a specific feature that you see in Premiere Elements 11 and 12.
Adobe Premiere Elements 11 * Capture stop-motion and time-lapse video
Please let me know if you are OK with the above information.
Thank you.
ATR

Add effects to multiple clips

Hello
I'm wanting to add effects to multiple clips (more specifically sharpen and color correction)
I select all the clips and drag into the viewer, but the effects only apply to the first clip. How can I easily have the effects apply to more than one or all clips in the timeline.
Any suggestions greatly appreciated.
Thanks,

Here's how you do it:
1. Apply the effects to one clip.
2. Copy the clip
3. Select all of the other clips you want to apply the same effects to
4. Go +Edit > Paste Attributes.+ (I believe the command is Option-V)
5. Check the filters box.
6. Click OK.
Hope this helped,
Sasha

Two fast motion effects on one clip

Similar Messages

Maybe you are looking for