Two fields in the same location?

I have a form that has been upgraded to 10g R2 from 4.5. A key enter query trigger activates a field that is normally not diplayed (display=no) that is in the same position as another field. In Forms 4.5 activating the non-displayed field allowed the user to enter some data in that field however in 10g the other field is taking precedence, what do I need to do to make the normally non-displayed field the active field?

Actually what's a little strange is the 2 fields are in different blocks. The field that is normally displayed is in the 2nd block while the non-displayed field is in the 1st block. In client server mode everything works fine but on the web the field doesn't work so I'll probably have to turn the normally displayed field off as was previously suggested. Thanks.

Similar Messages

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

Two fields on the same line in sreen programming

Hi All,
I need to create a selection screen which would have two fields (their texts and their irespective input fields) in the same line, on the screen.
I was able to achieve this by using code--
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-a04.
PARAMETERS: sch_begd LIKE qppnp-begda.
SELECTION-SCREEN COMMENT 52(22) text-a05.
PARAMETERS: sch_endd LIKE qppnp-endda.
SELECTION-SCREEN END OF LINE.
This could allign the fields - start date (text-a04) and end date (text-a05) in the same line along with their input fields.
But I am facing two issues with this code-
1. I am not able to get the underline same as we get when we create selection screen using 'select-options' and 'parameters'.
2. This is causing accessibility issues, as the field text and the input field are no more linked (since I am using text element to display the field text, like for start date), it cannot find the text to be read for the input field and hence the checkman errors.
Please suggest how to achieve the same.
Thanks and Regards,
Arpita.

Hi Arpita,
Are you trying to have select-option field in your screen in dialog programming?
If yes than you can use the following approach else ignore this.
Create one screen (100) and create subscreen area on this screen and call this subscreen in PAI and PBO of screen
Using call subscreen check F1 help for calling subscreen in PAI and PBO.
Now you should create your selection screen on the subscreen use selection screen begin of screen (100) option of defining
selection screen and then add your selection options here.
Regards,
Pawan

On camera roll I seem to have two photos in the same location. When I click on the visible photo a different photo is revealed. I cannot load the photos onto my MacBook

On camera roll I seem to have two differen photos in the same location. How do I resolve this? I cannot transfer one of each of these photos to my macbook. Any ideas?

An hour-long phone discussion with Apple Support yesterday solved this question and sorted a couple of others.
As for this one, do not ignore any messages which pop up when you plug in your iPhone and ask "Trust this computer?". The correct reply is "Yes", not "Cancel".
OK, you cancelled like I did, thinking "What on earth is this for?". Mistake. You can force the issue by having iTunes open when you next plug in your iPhone. Tell the iPhone that it can trust its old friend, your computer and voila! Your photos can download into iPhoto again.
Thank you, Jay with Apple Sydney, Australia!

How to generate a value to field in a row based on another two fields in the same row ???

I have a quantity and unit price and there is also a field in the same row called total price. I want to get the value automatically of total price from multiplying quantity and unit price.

Here you go:
page code
                        <af:panelGroupLayout id="pgl2" layout="horizontal" styleClass="AFStretchWidth">
                            <af:inputText label="Quantity" id="quantity" value="#{bindings.quantity1.inputValue}" autoSubmit="true"
                                          valueChangeListener="#{SetItemBean.valueChangeListenerItem}"/>
                            <af:spacer width="10" height="10" id="s1"/>
                            <af:inputText label="Price" id="price" value="#{bindings.price1.inputValue}" autoSubmit="true"
                                          valueChangeListener="#{SetItemBean.valueChangeListenerItem}"/>
                            <af:spacer width="10" height="10" id="s2"/>
                            <af:inputText label="Sum" id="total" value="#{bindings.total1.inputValue}" partialTriggers="quantity price" readOnly="true"/>
                        </af:panelGroupLayout>
page bindings
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel" version="12.1.2.66.68" id="SetItemPageDef" Package="de.hahn.blogtest12c.view.pageDefs">
<parameters/>
<executables>
    <variableIterator id="variables">
      <variable Name="quantity" Type="java.lang.Number"/>
      <variable Name="price" Type="java.lang.Number"/>
      <variable Name="total" Type="java.lang.Number"/>
    </variableIterator>
</executables>
<bindings>
    <attributeValues IterBinding="variables" id="quantity1">
      <AttrNames>
        <Item Value="quantity"/>
      </AttrNames>
    </attributeValues>
    <attributeValues IterBinding="variables" id="price1">
      <AttrNames>
        <Item Value="price"/>
      </AttrNames>
    </attributeValues>
    <attributeValues IterBinding="variables" id="total1">
      <AttrNames>
        <Item Value="total"/>
      </AttrNames>
    </attributeValues>
</bindings>
</pageDefinition>
and bean code
    public void valueChangeListenerItem(ValueChangeEvent valueChangeEvent) {
        String comp = valueChangeEvent.getComponent().getId();
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
        // get an ADF attributevalue from the ADF page definitions
        AttributeBinding attr = (AttributeBinding) bindings.getControlBinding("quantity1");
        Number q = (Number) attr.getInputValue();
        if (q == null)
            q = 0;
        attr = (AttributeBinding) bindings.getControlBinding("price1");
        Number p = (Number) attr.getInputValue();
        if (p == null)
            p = 0;
        if ("price".equals(comp)) {
            p = (Number) valueChangeEvent.getNewValue();
        } else {
            q = (Number) valueChangeEvent.getNewValue();
        // set new value
        attr = (AttributeBinding) bindings.getControlBinding("total1");
        Number t = q.doubleValue() * p.doubleValue();
        attr.setInputValue(t);
        // update Total
        FacesContext facesCtx = FacesContext.getCurrentInstance();
        UIComponent ui = facesCtx.getViewRoot().findComponent("total");
        if (ui != null) {
            // PPR refresh a jsf component
            AdfFacesContext.getCurrentInstance().addPartialTarget(ui);
Timo

How to compare two fields from the same table in the select statement

Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
Regards

Hi ,
       it will not return any value   when you are using   column of same table
       such as Date Field   , Because while Using Aggregate Function it will not check with self column
.      For that you have to take data in one internal table and then you can work on it .
     And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
        include structure aufk .
      types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak.

OVS for two fields in the same selct Option?

Hi Experts,
I am using select options in my view. I am using OVS for one field. I would like to use same OVS for another field in the same select option.
I tried "case ovs_callback_object->context_attribute". Which return the field for which we press F4.
But IT did not work here probably because this we can use only for context attributes fields.
but But here I dont get the select option field.
But in my case I have select options which are not mapped to any context attribute.
How can I find , for which field in select options F4 help has been requested?
Regards,
Vishal.

Hi,
You can find which field in select options F4 help has been requested using I_OVS_DATA-M_SELECTION_FIELD_ID.
        CASE I_OVS_DATA-M_SELECTION_FIELD_ID .
             WHEN 'PERNR'.
             WHEN 'ENAME'.
             WHEN OTHERS.
        ENDCASE.
If you are using one OVS for more than one fileds, please remember that you need to provide different code for each fields at phase 0 (configuration) and phase 3 (apply result).
Regards,

How to create a field in an OAF page which sums two fields in the same page.

Hi,
In the HRMS appraisal page, I have two fields in different regions.
1. One field shows the total score of the competencies.
2. Another field shows the total scores of the objectives.
The problem with the appraisal total score is it returns only the rating level id. (It does not take decimal values)
Hence I want to add the above two fields which is displayed in the same page and show as a new field in the top of the page as the final appraisal score.
[Something similar to what is mentioned in the metalink document 1315431.1 ]
We are in 11.5.10.2.
I am new to OAF and have no idea as to how to achieve the above step. Can anyone guide me in doing it?
regards

Hi,
Went through the steps to do a VO substitution.
But normally in all the examples given the page will belong to the application where we are modifying.
Eg. in this case the "about this page" shows /oracle/apps/fnd/wf/worklist/webui/NotifDetailsPG
This is coming under fnd top where all the appraisal VOs and other pages comes under PER_TOP.
Should I bring all the files from FND_TOP of the server to my PC where jdev is installed.
I have already taken all the files under $PER_TOP to my PC.
regards

Data Sets - Is there a way to put two fields in the same row?

I am working on my first Spry Data Set (in Dreamweaver CS4) which, if I can get it figured out, will eventually be used as a calendar on a client's web site. You can see the beginning of the project here:
http://www.rieradesignco.com/calendarlist_spry.html
My question is, can I put two or more fields on one row? Specifically, I would like the part that looks like this...
3
[WED]
Fusion
... to look like this:
3 [WED] Fusion
I tried simply moving the fields (in Design View) so that they looked like they would be in the same row, but as you can see, that didn't do the trick. (You can see what I did here, in the highlighted part of the screenshot: http://www.rieradesignco.com/spryquestion.jpg). I also tried nesting a table within the table on my html data document that contained the three fields I needed - it worked okay, but that just makes the table more difficult to work with. I don't want to simply type the three items into one field, because it will be a long list and they all need to line up perfectly.
Is there another way to do it?

Change the following line to include the red coloured parts
<div class="MasterColumn" spry:repeat="ds4" spry:setrow="ds4" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">
<span>{Dsp_#}</span><span>{Dsp_WkDay}</span><span>{Dsp_Event}</span>
</div>
The add the following style rule to your document:
.MasterColumn span {
display: inline-block;
I hope this helps.
Ben

Two FK in the same tabe/query

I'm trying to return two fields from the same table through two joins in the same query.
Take this example:
Table: Product
ID Varchar PK
Name Varchar
Leader Varchar FK to Person.ID
Backup Varchar FK to Person.ID
DATA:
1 MyProduct 123 345
2 YouProdct 345 678
Table: Person
ID Varchar PK
Name Varchar
DATA
123 John
345 James
678 Tom
I need to return
RESULT:
Name Leader Backup
MyProduct John James
YouProdct James Tom
I've lots of different queries, but I always get either what looks like a cartesian product or a syntax error.
Thanks in advance
Edited by: jdc114 on Mar 28, 2009 5:20 PM

What have you tried? It would seem like
SELECT product.name, leader.name, backup.name
FROM product,
       person leader,
       person backup
WHERE product.leader = leader.id
   AND product.backup = backup.idwould be sufficient.
Justin

How to place two text fields on the same line in adobe

I am trying to create a form on adobe and I would like to have two unique text fields on the same line. Is this posible?

If you are using FormsCentral it is, the fields can be placed "side by side" in a row. There is a "+" sign on the right side of the field that brings up a toolbar to add a field adjacent. You can also right click on a field and select "Insert beside", or you can "drag and drop" fields next to one another or to a new row.
Thanks,
Josh
PS - One note, if you are using the "desktop" application of FormsCentral that comes with Acroat Pro XI make sure the application is up to date by either using the "Help" - "Check for updates" menu item or by signing into the application so that you have the latest features including the side by side layout.

Print data in two line in the same column

Hi,
In a tabular Report I want to print a column (eg:Description,) in two lines in the same cell.
Since the description is too long. Is it possible in report 6i. Or any other solution for this?
Please reply.

Hello,
For the Description field set the Vertical Elasticity to EXPAND. Then it will adjust automatically based on data.
-Ammad

How do I share one itunes account between two users on the same computer

How do I share one itunes account between two users on the same computer without taking up twice as much space on my hard drive?

You would need to move the itunes folder to a location that both users have permissions to access such as the Shared folder or any folder on the root level of the macintosh HD.
You can find instructions here http://support.apple.com/kb/HT1203 This method allows you to share the content without sharing the same library.

How do I separate two movies on the same timeline?

I'm using Premiere Elements 11 but have not used it for a while so I've forgotten much of what I've learned. So here is my question: I have two movies on the same timeline. How do I separate them. In other words, how can I move one over on the timeline so it will not confuse my editing of the other one? But better yet - how can I just take one movie off the time line completely and edit it later as a separate movie. I really have four short movies - one minute long. I'd like to edit them separately, with a new file name. I don't know how to do this anymore.

Tommyvincent
I have been doing some homework on the questions that you raised in this thread.
Observations....
1.
After you import a video into Project Assets, you can right click it, select Rename. That file when dragged to the Timeline will have the new name.
But...
If you import a video into Project Assets, drag it to the Timeline, right click the Timeline clip, select Rename from the pop up, then the Timeline file will be renamed but not its thumbnail in Project Assets. You would have rename that Project Asset thumbnail to match if you wanted to. But, these renamed files still trace back to the original with its original file name at its hard drive save location.
2.
About getting off your Timeline...one way would be to export the clip selectively if it were in group of clips on the Timeline. Two requirements for that
a. In Edit area, set the gray tabs of the Work Area Bar to span just the segment to be exported
and
b. In the export area, have a check mark next to "Share Work Area Bar Only" option.
3.
If you brought a clip into Project Assets, double clicked it to open its Preview Window, you could trim the clip with the Set In and Set Out points and create "subclips" with new names in Project Assets. These "subclips" would be part of that project's media that could be dragged to the Timeline when needed.
Please review and determine if any of the above is going in the right direction for what you want to do.
Thank you.
ATR

How do i create one source file that feeds two users on the same pro book?

how do i create one source file/folder of photos that feeds two users on the same pro book?

Well you can do exactly the same with a folder of photos, just put in the Users/Shared folder.
Iphoto is a mite more complex than this. It's a database and so there's a bit more involved.
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

Two fields in the same location?

Similar Messages

Maybe you are looking for