Two fields needed in the dynamic selection of standard tcode CN47N

In tcode CN47N,In the dynamic selection Under Dates Network/Order, Two fields start and finish date are needed.

Hi,
I already did this in SE36. The problem is that my Z-fields do not appear in BSIK. They appear only in BKPF... And in SE36 if I try to select the Z-fields in BKPF, they do not appear in the dynamic selections.
Thanks for your answer. Kind regards,
Isabel

Similar Messages

Modifying Dynamic selection in standard logical database

Hello guys,
I have a requirement to add a field to a dymamic selection of standard programs.
The standard programs used the logical database KDF.
I have created a custom selection view and included the required field which is from table BKPF.
But this field is not appearing as the table BKPF is not defined as a node in Dynamic selection but in only field selection.
Can anyone please provide me with come help on this?
I need to add the a field from BKPF to the dynamic selection of standard logical DB KDF. Is this possible?
Thanks and regards

Hello Thomas,
thank you very much for the precious help.
I appended the field BKTXT to BSIK and BSAK as used in logical database and these are automatically filled for new postings thanks to Move corresponding (as indicated).
We are left with only to feed these new fields with existing data/records.
kind regards..
Edited by: Devi on May 19, 2009 12:51 PM
Edited by: Devi on May 19, 2009 12:51 PM

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Need to Add BKTXT in the dynamic selection in FB03

Hi Gurus,
In the dynamic selection FB03, the field BKTXT is not included in the dynamic selection. Would it be possible to add this field?
Youre inputs would be greatly appreciated.
Thanks and best regards,
JeCCas_DJ

Hi,
You wants to add the BKTXT field on the selection screen of FB03?
Why? for what purpose?
Better copy the program related FB03 to some Zprogram and modify it by writing a select statement to get this BKTXT firld form BKPF/BSEG tables.
SInce this is a text field, normally we don't put onthe selection screen.
Regards,
Anji

The dynamic selection for profit center in FBL1N isn't working

Dear all,
I have one one issue regarding FBL1N.
The dynamic selection for profit center in FBL1N isn't working.
If we enter profit center, we don't get any value.
As per developer after debugging, table BSIK is not getting updated, hence values are not updating in the report.
Please let me know, any configuration is missing.
BR,
Shailendra

Try BSEG and see if its there for the particular doc. If its not there its a functional issue, you have to capture profit center at the time of entry. You can either make the profit center field mandatory or substitute it at the time of document generation. Consult your FI consultant. If u have activated New GL features the profit center may me in table FAGLFLEXA. but i don't think u can get the profit center from this table for your purpose, you may need to develop a zreport.
And its not BISK its BSIK
Edited by: Harisankar S on May 4, 2010 3:05 PM

FAGL_FC_VAL in ECC 6.0 M not able to get the dynamic selection options

Hi
While executing the transaction FAGL_FC_VAL in ecc 6 we are not getting the dynamic selection option same as ecc 5 we need business area as selection option.
Please provide solution.. if any note to be applied we will do that. we have recently migrated to ECC 6.0
Regards,
Abhijeet

Sorry. This typo was only in this forum message. Within the BPEL process it's :
<from expression="ora:countNodes('inputVariable','payload','/ns1:Transmission/ns1:TransmissionBody/ns1:GLogXMLElement/ns1:Release') "/>
Still 0 count.

How to change the Dynamic Selection screen

Dear Freinds,
I have requirement where in on the selection of Dynamic Selections ( iam using PNP logical database) i want to add another fields , could any one tell me how to change Dynamic Selections as per my requirement.
please let me know .
regards
divya

Hi Prat,
I have done similar way and saved the view ( i.e se80> ediobject>table>table name > given all the tables required for me and i try to saved it is not allowing to save and giving message as empty view cannot be saved. Therefore i have selected the tables which have been added and made one by table and selected them . some how it got saved. Now when i added this name of the view in the custom report caterogy and executed my custom report and selected the > dynamic selections i found as empty and in debugging i can see all the 4 tables which i have mentioed while createing view are there . But i dint understood why the custom View is empty.
please correct me where i went wrong.
regards
divya'

Try to capture the dynamic selections of a standard LDB

Hi experts,
I checked on the SDN, some people said we can use set parameter and EXPORT/IMPORT to do it. Does it mean we use this statement in the LDB and send the value of selections to memory then get them in the program? If there is a standard LDB, how can I get the value of its dynamic selections?
Also There are some FMs, such as FREE_SELECT_*, but the INIT and DIALOG FM are used to show the user dialog and fetch its results. The rest FMs in the FG are used to convert the format of the selection reults. So is there any FM which can be used to get the value of the dynamic selections of a standard LDB in my program? I hope there is a selection ID for the LDB's dynamic selection and it can be captured by a FM.
Thanks for reading and help.

use fm RS_REFRESH_FROM_DYNAMICAL_SEL
here's a sample to search for a free selection (her field XBILK)
DATA RANGE TYPE RSDS_TRANGE.
DATA : BEGIN OF WA OCCURS 0,
         TABLENAME LIKE RSDSTABS-PRIM_TAB,
         FRANGE_T TYPE RSDS_FRANGE_T,
       END OF WA.
DATA : BEGIN OF CA OCCURS 0,
         FIELDNAME LIKE RSDSTABS-PRIM_FNAME,
         SELOPT_T TYPE RSDS_SELOPT_T,
       END OF CA.
DATA ERR.
DATA: RSDSSELOPT LIKE RSDSSELOPT OCCURS   0 WITH HEADER LINE.
CALL FUNCTION 'RS_REFRESH_FROM_DYNAMICAL_SEL'
       EXPORTING
            CURR_REPORT        = SY-REPID
            MODE_WRITE_OR_MOVE = 'M'
       IMPORTING
            P_TRANGE           = RANGE
       EXCEPTIONS
            NOT_FOUND          = 1
            WRONG_TYPE         = 2
            OTHERS             = 3.
ERR = 9.
LOOP AT RANGE INTO WA.
    APPEND WA.
    IF WA-TABLENAME = 'SKA1'.
      ERR = 0.
    ENDIF.
ENDLOOP.
CHECK ERR = 0.
ERR = 9.
LOOP AT WA-FRANGE_T INTO CA.
    APPEND CA.
    IF CA-FIELDNAME = 'XBILK'.
      ERR = 0.
    ENDIF.
ENDLOOP.
CHECK ERR = 0.
ERR = 9.
LOOP AT CA-SELOPT_T INTO RSDSSELOPT.
    IF RSDSSELOPT = 'IEQX'.
      ERR = 0.
    ENDIF.
ENDLOOP.
hope that helps
Andreas

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

Disable the Dynamic Selection Icon from T.Code FBL1N

Hi,
I want to disable the Dynamic Selection Icon from T.Code FBL1N...
Please Note that i found a link where some code is given for this problem.
Remove the dynamic selection screen.......
Please tell me where i paste that code....after initialization or where....
Thanks...
Edited by: Prince Kumar on May 16, 2009 8:59 AM

Hi,
1) COPY the program RFITEMAP and create a ZRFITEMAP
2) and added this code in the INITILIZATION event. You can search ZRFITEMAP with INITIALIZATION and add below code there.
INTIALIZATION.
DATA: t_exclude TYPE STANDARD TABLE OF sypfkey.
APPEND 'DYNS' TO t_exclude.
"DYNS is the dynamic selection screen function code.
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
    EXPORTING
      p_status        = sy-pfkey
    TABLES
      p_exclude       = t_exclude
Regards
Shital

Which table the dynamic selection view will be stored

Dear Freinds,
I have created a dynamic selections view form Se80 > Editobject>Selection view > Created by adding the required tables pa0002,pa006,pa0009 . But the transport request we have saved it locally
now i want to create a transport request for the dynamic view . Could any please let me know how to create transport reqest for the Dynamic selection
View which has been created.
regards
divya

HiDivya,
yo have saved the changes into local object and now you want to generate the TRN and for the save you have to change the attribute > GOTO > Other object Entry and changed the package and TRN will generate .
Regards
Sheetal

Need to generate dynamic selection screen

Hi,
'am looking for a requirement in ABAP Programming which is feasible!
While executing my report, std. selection screen ( 1000) gets displayed and it gives the output list which consists of only one field that will have TABLE NAMES. Once the user selects any one of the record on this output list, I need to display another screen ( selection screen ) with all the key fields of that table that got seleted.
How do I populate a dynamic selection screen by passing TABLE NAME as parameter with all the keyfields of that table as select-options.
Awaiting your quick positive reply..
Regards,
Kriss.

hii
check this one
SELECTION-SCREEN BEGIN OF BLOCK blk.
PARAMETERS : p_rb1 TYPE c RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND FC,
 p_rb2 TYPE c RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK blk.
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME.
PARAMETERS : p_werks1 TYPE werks_d MODIF ID bk1.
SELECTION-SCREEN END OF BLOCK blk_1.
SELECTION-SCREEN BEGIN OF BLOCK blk_2 WITH FRAME.
PARAMETERS : p_werks2 TYPE werks_d MODIF ID bk2,
 p_matnr2 TYPE matnr MODIF ID bk2.
SELECTION-SCREEN END OF BLOCK blk_2.
AT SELECTION-SCREEN OUTPUT.
IF p_rb1 = 'X'.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK1'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSE.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK2'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
Regards
Naresh

Is there a way to have two fields hidden from the user but active for the person receiving the form?

I have an order form where there are two fields that the original form filler does not fill out. The person who finally receives and processes the completed form needs to fill in those two fields. I'm not sure how to handle this. Any help would be appreciated.
Thanks,
MDawn

My suggestion is a folder level script, that controls the visibility of form objects.
Only if this script is installed the fields will be visible.
You need three things for this.
1. The folder level script that has to be installed in the javascript folder of Acrobat or Reader:
var ShowMeAll = app.trustedFunction(function(doc)
     app.beginPriv();
     var ShowMe = this.xfa.form.Form1.Master.ShowAllContent;
     ShowMe.rawValue = "Yes";
     app.endPriv();
2. A hidden textfield in the form (on the masterpage for example).
Let's say you name it "ShowAllContent".
Put this script into it's docReady:Event.
try
     event.target.ShowMeAll(event.target);
catch(e)
     this.rawValue = "No";
3. A script in the layoutReady:event of the subforms or form fields you like to show/hide depending on the presence of the folder level script.
if (xfa.form.Form1.Master.ShowAllContent.rawValue == "Yes")
     this.presence = "visible";
else
     this.presence = "hidden";

How to control the dynamic selections in FBL3N?

When I execute the Selection screen of the logical Database SDF, it shows me all the 4 segments - GL Master Record, Compnay Code, Document, Custom (I added this descritption).
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE SKA1.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE SKB1.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE BSIS.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE FAGLFREESEL.
but when I execute FBL3N, I am not able to see the 4th segment fields (FAGLFREESEL).
Pl advise where it is gettig suppressed in the code.
Also is there a way to use the fields from the following in Dynamic Selections?
SELECTION-SCREEN FIELD SELECTION FOR TABLE SKA1.
SELECTION-SCREEN FIELD SELECTION FOR TABLE SKB1.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BSIS.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BSISEXT.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BKPF.
SELECTION-SCREEN FIELD SELECTION FOR TABLE BSEG.
SELECTION-SCREEN FIELD SELECTION FOR TABLE GSEG.
Thanks,
Ven

no solution so far. clsong as it is waiting for a long time

Field to add in Dynamic selection

Hi experts,
If i want to add one field in dynamic selection in FBL3N report what is the procedure?
please give the steps
points will be awarded

Hi,
If iam not wrong you want select field from dynamic selection
for that goto fbl3n and select dynamic selection in that which field is required select that and execute you will get desired results
but if you want *** fields in dyanmic selection i think it is immpossible.
Thanks
Shiva

Two fields needed in the dynamic selection of standard tcode CN47N

Similar Messages

Maybe you are looking for