Two file windows disappear if I use extend screen to compare 2 lessons

I use a laptop and an extra screen in "Extended" mode. I drag out one file window from Captivate and maximise it to the full screen size. I drag out the other file window, and make it as large as possible on the laptop.
When I move to another app (e.g. Outlook) , I lose both these file windows and can't find them again without closing them and reopening them. Usually, if Word is in the extra screen, it still shows as a window in the task bar. This does not happen for the Captivate file windows despite having the standard functionality window controls.
My question is where in Captivate can you bring back these files when they disappear? I checked the windows menu but to no avail.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/

Similar Messages

FF window too large when using extended desktop. Must reboot to return to correct size when I return it to the main screen.

I watch on-line videos on my HDTV by using "extended desktop" and sliding the FF window to the HDTV. The window becomes too large to access the controls to size it, or the top bar, to move it.
I can move FF window back to my pc by minimizing it on the pc toolbar, but when I "restore" it, it restores to the HDTV. I can not move it back to the pc, I also cannot re-size the screen

Hello. Thank you all for giving my some advise but I do not understand any of it.
I'm a bit of a technophobe when it comes to computers.
It is a Sony Vaio and there is a model number on the base of the laptop PCG-71911M. I have tried to look in the Control Panel to see if I can find its specifications but these days the system is too complicated for me to understand.
I did try seek out the information on the internet but just get a French site. Doh!!!
I use Nikon View NX software when I am viewing my images and again if I go to full screen for viewing the image the taskbar 'occludes' the little arrows I use to view the next image. When this happens I just click the little box in the far right edge of the taskbar and ViewNX 'disappears'. When I go back in and click on 'show desktop' it clears the taskbar. I can then easily access the buttons to move forward. Also when I am using PSE8 I have the same problem with accessing the buttons after I have completed my raw adjustments in the ACR window but it allows me to press the buttons with great difficulty if I can 'catch' the edge of the button and the ACR goes into PSE8 properly. I'm sorry that I have not explained myself well. At the present it looks as if the ACR window is too 'large' for the PSC5 window it 'sits upon'. It seems that it does not want to 'sit over' the taskbar. I have eventually fathomed that I can use Cntl and O to open the image (Open Image button) but this is not the least bit satisfactory. I don't know how I am going to access the other options eg 'done' and 'cancel' and 'save image'.
Thank you all once again and any help - but idiots' language please - would be gratefully accepted.
Jacqueline.

How 2 read two files from 2 diff. directories, using single adapter

How 2 read two files from 2 diff. directories in same system, using single file adapter.

you can use advanced selection for source file
see
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm

How to process two files at the same time using BPM

Hi experts,
I have a Integration Process it takes two files one Header xml and one Lines xml. These files shoudl be processed at the same time because them will be mappend in a Idoc.
The realy trouble is that these inbound xmls never are executed at the same time. Then a IP is executed for each inbound xml.
This is the IP:
http://picasaweb.google.com/hose86/SapXi#5377539387476591346
This is related documentation:
http://help.sap.com/saphelp_nwpi71/helpdata/en/cb/15163ff8519a06e10000000a114084/frameset.htm
I try to do all what I know, but It don't work fine :S
Thanks in advance and Regards,
Jose Antonio.

Hi Jose,
Don't specify any end condition for fork step and check the start process check box in both the receive step.
Also put all steps inside the block.. so that the control step in deadline branch can throw exception and after that the BPM ends. As per the design now, if a deadline exception is raised (it will b handled) but after that the transformation step and send step is executed. There the BPM fails.
Regards
Suraj
Edited by: S.R.Suraj on Sep 4, 2009 5:39 AM

Window order question when using Full screen

Hello all,
This is my first time posting.. Probably many more to come.. But this is probably a really easy question. I am really new to Cocoa and am picking it up slowly one step at a time.
I am making an application where I need a full screen animation to work with. I have been able to get that up and running and have been able to use a keyboard event to toggle the window to go to full screen and back to window size. However, once I go from the window (which when the app starts is window size) to full screen then back to window I cannot go back into full screen without reselecting that window. What can I do to get it so it will go back and forth all day without having to physically click the window? I have tried using the [self becomeFirstResponder] after it exits full screen and didn't help. I am using the [self enterFullScreenMode:[NSScreen mainScreen] withOptions:nil]. This will be on a MacMini installed kind of like a kiosk so it won't have a keyboard and mouse at all times.. And I might be only using the apple remote or something like that for control.
Thanks for your help!!

Hi speluttiero!
I've got the exact same problem, with MacBook Pro Core i5. 64 bit Windows 7 in Boot Camp.
It even crashes the whole Windows every now and then when playing flash full screen.. screen goes blank, some strage noise from speakers, and then requires reboot. Anyone any idea what's the problem?

Is a Windows registry error responsible for Firefox opening two browser windows whenever I use a hyperlink from a Word file?

Whenever I use a hyperlink from an MS Word document, Firefox opens two windows instead of one. The first window is the one I need. The second contains a message that the page could not be found and the address bar contains the URL appended with "Firefoxhtml/shell/open/command".
This problem is similar but NOT identical to one in MozillaZine headed "Windows error opening internet shortcut or local HTML file - Firefox". But none of the solutions in that article work for my problem: I've disabled all extensions but that hasn't helped. I've tried editing file types so that the DDE is removed (I'm not a teccie so have no idea what that means), but after following the instructions to the letter it doesn't seem to remove the DDE. Also I read that removing the DDE is not a good idea for people like me who need to open numerous firefox browser windows at one time. Furthermore, the MozzilaZine article refers only to problems opening a URL link in a MS Outlook email when Firefox is NOT running. My problem concerns the opening of URL links in MS Word when Firefox IS running!
I've run countless different virus programmes, rootkit checkers etc but they all come up blank. However, I did come across guidance on this website: http://antivirus.about.com/od/windowsbasics/a/shellopen.htm which suggests that something may have altered the shell open command for two registry keys used by Firefox.
# HKEY_CLASSES_ROOT\htafile\shell\open\command
# HKEY_CLASSES_ROOT\htfile\shell\open\command
The default value for each of these should be "%1" %*. But on my user, the default value reads:
(for htafile) c:\windows\system32\mshta.exe "%1"%*
(for htfile) c:\programfiles\windowsNT\hypertrm.exe"%1
What should the value be for these two files?
Can anyone sort this for me please? Bear in mind I'm not a teccie!

Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Months ago I tried to uninstall itunes from Windows 7 after an update failed. I couldn't do it because two files, ShellStreams.resources and ShellStreams.dll were in use. Any suggestions, please?

Months ago I tried to uninstall itunes from Windows 7 after an update failed. I couldn't complete it because two files (ShellStreams.resources and ShellStreams.dll ) were in use. I'm ready to try again. Any Suggestions, please.

See Troubleshooting issues with iTunes for Windows updates for tips on repairing the iTunes installation. One of the tools mentioned there, Unlocker, should be able to force delete the files that you are having trouble removing.
tt2

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101

Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as two other Windows computers (one running 7 and one with Vista)?

Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as to store information from two other Windows computers (one running 7 and one with Vista)?

Yes you can but you need to partition the drive into at least 2 separate drives.
To do that you need to use a Windows PC to do the first partitioning. Say you split the drive into two partitions each 1TB (or close to 1TB) each.
Partition fand format both partitions on a Win PC as one NTFS and the other FAT32.
Then move it to the Mac and Reformat the FAT32 partition Mac Extended (Journaled) with a GUID Partition Table.
I have that same drive and that is what I did originally with it. I now have it just for the Mac as I have other externals for the Win systems.
Good Luck.

Backed up files partially disappear after restore (Windows Server 2008 R2 - Windows Server Backup)

Dear all,
I am experiencing a problem with "Windows Server 2008 R2", using Windows Server Backup.
Here's my setup:
Server: RAID 5 Disk setup
Backup:
By using Windows Server Backup (within Windows Server 2008 R2), C: and D: were fully backed up, with "System State" and "Baremetal Recovery" options selected. Backup went okay without any errors.
Restore:
By using Windows Recovery Environment (booted from Windows Server DVD), C: and D: were fully restored to the original partitions with "System Recovery" option found within Windows RE (without re-formatting partitions during restore). Restore
went OK without any errors. Rebooted, and system has been running fine.
Problem:
After the restore, the system itself seems running OK; no BSOD, no crash, no visible errors.
However, our client insisted some files (around 6 to 7) which are related to the propriety software has "disappeared" right after System Recovery.
Question:
Since Windows Server Backup is using "Volume Shadow Copy" technology which enables "live backup" of the running system, is it possible that some files will disappear (=restore error) after
System Recovery?
I cannot really find any errors or warnings related to Windows Server Backup in the event log, through. No Windows-backup errors. No VSS errors, too.
Do anybody have experienced this kind of problem in the past? Any suggestion will be greatly appreciated.

Thank you for your reply, Ms. Mandy.
To make things clear, let me explain to you briefly:
1. The "missing data" was backed up with "full system backup".
2. After a system restore from the above backup image, as you mentioned, partitions has been overwritten with the partions' backup data in the Backup Data Set taken by Windows Server Backup. No error with backup. No error after restore, and reboot - system
has been running fine.
3. Although there was a report that the affected files(about 7 java exectables) were missing after the above restore operation, other aspect of system was running fine at the time of the report.
4. I have checked the original backup data set - and voila, there ARE files which seems to gone after restore.
5. When I used Windows Server Backup "on" Windows Server 2008 R2 normal environment (= NOT Recovery environment from DVD) and selectd ONLY these affected files to restore, these files could be RESTORED successfully, without any errors. SO... data
was property backed up.
> The recovery will overwrite the partitions so files created after the backup point will be missing.
I understand, and this is not the case this time, because the affected files are already present in the backup data set (= I have mounted the backup data as VHD, and I could clearly see them present in the mounted VHD file)
Plus, these files are completely restoreable via "selective file restore" in Windows Server Backup.
Things I want to know/confirm:
> The recovery will overwrite the partitions
If I understand this correctly, in case that the files in question are already present in the backup data set, these files SHOULD be restored after full system restore, right? (If these files could not be restored, Windows Server Backup SHOULD show some errors.)
What do you think, Ms. Mandy? :)
Jo

Before I downloaded Lion every time I would upload a pic from iphoto there would be two files. One that was 1.8MB and another that was 50KB. Now I can only find the 1.8MB one. Did this option disappear with Lion?

Before I downloaded Lion every time I would upload a pic from iphoto there would be two files. One that was 1.8MB and another that was 50KB. Now I can only find the 1.8MB one. Did this option disappear with Lion? I really need this option!

Sorry but this is not clear.
When you would "import" what?
two files would show up in "images".
Do you mean in the All Images search in the Finder?
IF so:
1.Never interact with photos that are in iPhoto via the All Images Search. This does not understand the iPhoto Library and it's very, very easy to damage the library this way.
2. What you were seeing was the original file you imported and the thumbnail created by iPhoto for viewing on the iPhoto Window. That thumbnail is not designed for user access.
What are you trying to do ultimately?
Regards
TD

I can't download itunes on my windows 7 laptop (it used to be installed but seems to have disappeared)

I can't download itunes on my windows 7 laptop (it used to be installed but seems to have disappeared).
An error message appears near the end of the (ultimately failed) install attempt saying something like 'apple mobile device does not have the right privileges'

until the last programme finishes downloading then it won't open the file because it can't be found.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files can be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

My notification center (windows 7 64 bit) disappear from time to time, any idea? (When it disappears, I cannot use the special keyboard functions like sound...

My notification center (windows 7 64 bit) disappear from time to time, any idea?
When it disappears, I cannot use the special keyboard functions like sound,brightness...
Thanks!

How is Acrobat 8 not fully Windows 7 compatible? I see discussions on this Adobe Community saying how Acrobat 8 does work on Windows 7 and with 64-bit. It appears that if Acrobat 8 is updated to the latest version, then this should fix AA8-Win7 issues. And I am at the latest AA8 version, 8.3.1.
And how are Acrobat 8 and Reader XI are not compatible? I have always had Acrobat and Reader installed on the same PC, without ever having any issues. And Adobe allows the installation of one after the other. So apparently Adobe allows them both to exist together. If they are incompatible, then why would Adobe allow them to exist together?
Anyway, I did uninstall the FileOpen Plug-in and the Reader XI, then reinstalled the FileOpen Plug-in. So now Reader is not installed and only Acrobat 8 is installed. I then tried to load the PDF file, but I still get the Acrobat 8 error described above.

How to use Two main windows with in a page in script ?

Hi any body explain me...
How to use Two main windows with in a page in script ?
with header data in one main window,
& Item data in other main window.

HI..,
u need to go for SPLITTING THE MAIN WINDOW !!!
Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
Here is the procedure !!
-->Create a page window and assign it to a page.
Choose Edit --> Main windows.
A dialog box appears.
-->Enter values in the fields Area width and Area height in accordance with the input guidelines for main windows.
-->Enter values in the fields Spacing and Number in the Horizontal group if you want to use multiple columns. You can ignore the fields in the Vertical group.
Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the Horizontal and Vertical groups.
-->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:

Left margin of current column + Window width + Horizontal spacing = Left margin of next column
In label printing, the field Upper margin also varies from main window to main window:

Upper margin of current main window + Window height + Vertical spacing = Upper margin of next main window
-->Enter a value in the field Start position.
This is a counter. Enter a starting value which is equal to or greater than 1.
-->The main windows are added to the list.
-->Save your form.
reward if it helps u...
sai ramesh

PS CS5 Extended on Windows - When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. W

PS CS5 Extended on Windows
When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. This just started tonight. What's causing this weird behaviour?

What are the settings in Window > Clone Source?

Two file windows disappear if I use extend screen to compare 2 lessons

Similar Messages

Maybe you are looking for