Two finger swipe is not working in mavericks

In mountain lion (MAC OS X 10.8) I use " command+alt+Y " key combination to watch the photos from any folder and use my two finger to swipe photos foreword and backward.
But it seems missing this functionality in mavericks, if not please any one help me to get it back in mavericks (MAC OS X 10.9).

Read through this thread. There are a few things that might help you.
https://discussions.apple.com/message/23467302#23467302

Similar Messages

  • My two finger scroll is not working

    My two finger scroll does not work on Firef

    hey natchilds, try to switch off smooth scrolling in preferences > advanced > general

  • Two finger scrolling does not work on my MacBook (late 2008)

    Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad.  Yes, I've set system preferences.  Suspect a driver or s/w problem.  Ideas?

    Saw another post that hinted that you need to go to accessibility settings:
    System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
    Enable scrolling (and I enabled dragging while I was at it and it worked.  Looks like wierd things can get set even if you don't mean it to.

  • MB Air two finger scroll does not work for a user but does for another

    Hi
    MB Air. 10.9.3.
    Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
    I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
    Tried this in Terminal:
    defaults write -g com.apple.trackpad.scrollBehavior 2
    Any ideas?

    This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

  • Two finger scrolling does not work ONLY on Firefox

    This just started today, suddenly my two finger scrolling doesn't work but only when I'm in Firefox, offline and on Safari and Chrome it's fine. Restarting Firefox only fixes it for a few minutes, then it stops working again. All of the suggestions I've found that I've tried haven't worked, please if anyone could help and also break it down fairly easily, I'd really appreciate it.

    ''guigs2 [[#answer-674567|said]]''
    <blockquote>
    Does this happen in Safe Mode?
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    :[[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    </blockquote>
    The same issue happens on Firefox 35.0 running in safe mode, Mavericks 10.9.5, both with Magic Mouse and normal standard mouse...
    It's unbeliaveble this issue is going on since more than one year ago, I can find people complaining about it since December 2013!
    Oh, one more thing: I don't have a two finger swipe configuration, I have single finger swipe, so the actual problem is about scrolling the page in itself (considering I've tested it with a normal standard mouse as well....).

  • Satellite C50-B-14D - Two finger scroll is not working

    I have had my laptop for about 6 months now and am generally happy with it. However, the two finger scroll has stopped working (it was working fine when I got it and for a while after). I know it's not essential, but it makes such a difference for the work I end up having to do, which often involves copying and pasting etc, and I really miss it!
    I've read many threads saying that you should go to Control Panel, click on Mouse and go to device settings. However when I get to that point, my Mouse box just says "buttons; pointers; pointer options; hardware" and there is no "device settings" panel along the top. What can I do? I also can't find the synaptics driver anywhere to uninstall it, as some other people have suggested.

    Obviously this additional touchpad feature isn’t available because the touchpad driver isn’t installed.
    I recommend you to visit the Toshiba EU driver page and to download the touchpad driver for this notebook model.
    I’m not quite sure what touchpad module this notebook supports (Synaptics or ELAN) but I think you could try to check both drivers.
    If one would not work, check the other one…
    After that you should see the additional tab within control panel -> mouse

  • Two finger scroll down not working on touchpad

    Hi,
    The two finger scroll function on the touchpad is not working.
    The driver is updated as well.
    Overall the touchpad seems unresponsive as well. It gets stuck and cursor stops moving. It is the only thing that I am not happy with regarding the spectre x360.
    Can you please help.
    Thanks

    Hello @ukx360 ,
    Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Spectre x360 Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
    If you will go to the section on Adjusting TouchPad, you will see a restore defaults button. If you select that it will restore the original settings.
    Hope this fixes things up.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Two-finger pinch zoom not working with safari

    Suddenly, the two-finger pinch to zoom is not working with Safari. MBP 13", SL 10.6.8 andf Safari 5.1. The View Menu Zoom control works fine, and the Pinch gesture works once thereafter, but then not. I have reloaded the Safari .plist. Gesture works with the Desktop icons and iPhoto. Any suggestions?
    TIA
    Picman

    Ditto with the Newsstand-blocks-the-Home-Screen bug.
    I was eager to see the revised New York Times layout and disappointed when Newsstand wouldn't pinch closed.
    The irony is, we can finally "hide" the Newsstand in a folder but now it takes over our Home Screens. I'm hoping this will be fixed in the first update.

  • Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

    Hello,  Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem?  please help me  sincerely, Karel 

    I would try installing the Windows 8.1 (64-bit)  Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode.  Try the available earlier versions if the current driver does not work for you. 
    If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
    To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
    The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4  and watch it from there.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Two finger secondary click not working!

    I have a 15" Macbook Pro with Retina. Brand new as of December 2012-
    I have searched everywhere for a solution to this! I have solved the problem only for a few minutes at a time by entering a short script into terminal, but nothing has worked permanently. I can get the secondary two finger TAP to work, but I can't seem to make the click to work... And yes, the option is set to work.
    When I log in as a guest, the feature does work, which seems to indicate that the problem is confined to my user account. Can anyone help? I would appreciate anything!
    Drew

    System Preferences > Trackpad > Point & Click
    Uncheck all 4 boxes and recheck them back.
    Restart the computer.

  • My two finger scrolling is not working for my hp envy 4 1017nr

    my hp envy 4 1017nr touchpad has stopped responding. the tapping , two finger scolling and edge scrolling has all become non responsive. I have reinstalled the synaptics driver but the problem still persists.

    Hi abbhey,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • 3 finger swipe does not work in finder after mavericks upgrade

    I used to navigate in finder by swiping with 3 fingers left or right. This still works in Safari. It even works when navigation through system preferences but not in finder. I looked at the options in the track pad preferences and all the gesture options are the same as before. I loved the 3 finger gesture because it made navigation through folders a breeze.

    Go to System Prefernces and Trackpad or Mouse, depending on which you are using, and see that the gestures you want to use are all checked.

  • [Solved] Two Finger Right Click not working properly

    When I use two fingers to perform a right click for example in chrome, then the context menu appears only for a blink of an eye and disappears directly again. (The issue appears independently from the application - I checked that)
    Here is my synclient configuration:
    LeftEdge = 1310
    RightEdge = 4826
    TopEdge = 2220
    BottomEdge = 4636
    FingerLow = 25
    FingerHigh = 30
    MaxTapTime = 180
    MaxTapMove = 218
    MaxDoubleTapTime = 180
    SingleTapTimeout = 180
    ClickTime = 100
    EmulateMidButtonTime = 0
    EmulateTwoFingerMinZ = 282
    EmulateTwoFingerMinW = 7
    VertScrollDelta = 99
    HorizScrollDelta = 99
    VertEdgeScroll = 0
    HorizEdgeScroll = 0
    CornerCoasting = 0
    VertTwoFingerScroll = 1
    HorizTwoFingerScroll = 1
    MinSpeed = 1
    MaxSpeed = 1.75
    AccelFactor = 0.0403307
    TouchpadOff = 0
    LockedDrags = 0
    LockedDragTimeout = 5000
    RTCornerButton = 0
    RBCornerButton = 0
    LTCornerButton = 0
    LBCornerButton = 0
    TapButton1 = 0
    TapButton2 = 0
    TapButton3 = 0
    ClickFinger1 = 1
    ClickFinger2 = 3
    ClickFinger3 = 2
    CircularScrolling = 0
    CircScrollDelta = 0.1
    CircScrollTrigger = 0
    CircularPad = 0
    PalmDetect = 0
    PalmMinWidth = 10
    PalmMinZ = 200
    CoastingSpeed = 20
    CoastingFriction = 50
    PressureMotionMinZ = 30
    PressureMotionMaxZ = 160
    PressureMotionMinFactor = 1
    PressureMotionMaxFactor = 1
    GrabEventDevice = 0
    TapAndDragGesture = 1
    AreaLeftEdge = 0
    AreaRightEdge = 0
    AreaTopEdge = 0
    AreaBottomEdge = 0
    HorizHysteresis = 8
    VertHysteresis = 8
    ClickPad = 0
    I'm on a Lenovo T440p. I once got Ubuntu installed on this machine where right click worked properly so I highly suspect it is not a hardware issue.
    EDIT:
    Using xev and performing a right click results in
    EnterNotify event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x0, time 563652, (44,45), root:(1008,83),
    mode NotifyGrab, detail NotifyInferior, same_screen YES,
    focus YES, state 1024
    KeymapNotify event, serial 32, synthetic NO, window 0x0,
    keys: 4294967263 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    LeaveNotify event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x0, time 563673, (44,45), root:(1008,83),
    mode NotifyUngrab, detail NotifyInferior, same_screen YES,
    focus YES, state 1024
    ButtonPress event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x1e00002, time 563673, (44,45), root:(1008,83),
    state 0x0, button 3, same_screen YES
    EnterNotify event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x0, time 563673, (44,45), root:(1008,83),
    mode NotifyGrab, detail NotifyInferior, same_screen YES,
    focus YES, state 1024
    KeymapNotify event, serial 32, synthetic NO, window 0x0,
    keys: 4294967263 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    ButtonPress event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x1e00002, time 563693, (44,45), root:(1008,83),
    state 0x400, button 1, same_screen YES
    ButtonRelease event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x1e00002, time 563693, (44,45), root:(1008,83),
    state 0x500, button 3, same_screen YES
    ButtonRelease event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x1e00002, time 563812, (44,45), root:(1008,83),
    state 0x100, button 1, same_screen YES
    LeaveNotify event, serial 32, synthetic NO, window 0x1e00001,
    root 0xdf, subw 0x0, time 563772, (44,45), root:(1008,83),
    mode NotifyUngrab, detail NotifyInferior, same_screen YES,
    focus YES, state 0
    Last edited by gladixy (2014-09-21 20:44:27)

    Instead of using execution statements involving
    synclient
    on startup of X I'm now using /etc/X11/xorg.conf.d/50-synaptics.conf for configuring my settings. This solved the problem.
    I realized by the way that in my former setup no matter how many fingers I used for pressing down the ClickPad it did always perform a normal click in addition. That is why the context menu disappeared right away: It performed a mixture of a right and left click.
    @Head_on_a_Stick: No Problem, your attempt to help is much appreciated
    Last edited by gladixy (2014-09-21 16:33:11)

  • Magic Trackpad will only work on clicking , finger swipe will not work at all.

    Please help the new guy out, just switched to Mac

    I have the same problem since update to 10.8.5.
    Just clicking works, nothin else

  • Zoom the screen with ctrl   2-Finger Swipe not working in Mavericks

    I just bought a new Macbook Air for my wife (running Mavericks) and can't figure out why the Zoom the screen with ctrl   2-Finger Swipe is not working.
    I can't find the setting anywhere. 
    I looked on my Macbook Pro running Mavericks (on which the zoom still works), but I cannot find the setting on that computer either.
    Please help.
    Thanks

    System Preferences---> Accessibility---> Zoom---> Use scroll gesture with modifier key to zoom. Select ctrl in the drop down menu.
    It's a feature not normally turned on, so you might of had it turned on on your Mac before upgrading to Mavericks. And it just kept the setting.
    KOT

Maybe you are looking for

  • Dynamic jmenu bar

    i have a dynamic JMenu on a jframe. The menu is populated by looking up database entries and ptting them into the right place. This is done by a method 'menus()'. I also have an addingredients class which adds new ingredient entries into the database

  • Using PDF's with Webcenter Imaging

    Hey We are installing an automated AP solution using WebCenter imaging and our client has dictated that invoices must be scanned to PDF to comply with State Govt requirements. However, this conflicts with our IPM build as we are using WebCenter Captu

  • File formats for graphic standards manual

    I am developing a graphic standards manual for a university and will be providing art files for their logo in a number of formats for both inhouse use (PC Word, Powerpoint, Publisher, inhouse web master) as well as for outside professional vendor use

  • *FBCJ - CASH JOURNAL POSTING - ABAP RUN TIME ERROR*.

    Hai, My problem is, while FBCJ cash journal posting, Error message comes as Programme terminated, short dump is beeing formatted. The screen is quitting out to ABAP RUN TIME ERRORS.  Short text of error message- For object, CAJO_DOC2 101, numer range

  • How do I convert a PXI8176 from RT to win2000

    We have a PXI8176 running LabVIEW RT 6.1 and would like to convert it into a windows OS (win2000) and then run standard LabVIEW on on the system. Can we do this and if yes how.