Two flv videos at the same time

Does anyone know how to keep flv files in sync? They play
synced correctly, but once I stop one, I do not know how to make
them sync again. I tried matching seek to playheadtime but it is
always off but 1 - 5 seconds.

Yes, it does not work even though it should. That is my
problem. And now I have two videos that were encoded differently
which I think gave me a clue to the problem.
For the boards reference in case anyone else ever needs to do
this...After doing more tests, I am starting to think that it has
something to do with the video keyframes. The Flash livedocs
mentions something about only jumping to specified points in the
video where keyframes exists. I am thinking that my videos have
different keyframes so sometimes it is off a little, and sometimes
more. Please correct me if there is a simpler problem AND solution
as this wont help me since I am not sure I can encode all my videos
exactly the same right now.

Similar Messages

Streaming two or more flv videos at the same time

Hi,
I am working on a site that is intended to stream two or more flv simultaneously. The slightly different header clip should renew on entry to each page.
When I publish the fla file it plays as intended. When I upload the swf file to the web only one of the videos are playing back.
It does not matter if I import the video to a timeline, or stream it progressively from the server. Both clips are uploaded.
I am using CS3 and AS3.
http://www.doctorhoover.com/marcia/test7.html
Anyone??
ggaarde

Hi!!! hey dogHouseJim!! Could you please post a sample of your fourMovies.swf code to know how you do it?? It would be necessary for me to know how to do it. I'm working in an application that has got two flvPlayback components working at the same time but the main video pauses too many times because the other one is running too. Please help me!!! I post here my code (The main flv is croma_01intro ---> it doesn't work too far, I'm a beginner.. ) Thanks in advance for your help!!!!
---CODE---
import com.hagane.MHU.Timer;
var timeKeeper : Timer = new Timer();
video_tmp="flvs/croma_01intro.flv";
video_tmp2="flvs/presentacion720.flv";
var conexion2:NetConnection = new NetConnection();
var conexion:NetConnection = new NetConnection();
conexion2.connect(null);
conexion.connect(null);
var stream2:NetStream = new NetStream(conexion2);
var stream:NetStream = new NetStream(conexion);
mi_video2.attachVideo(stream2);
mi_video.attachVideo(stream);
stream.play(video_tmp);
//aseguramos 10 seg de reproduccion
stream.setBufferTime(4);
loadMovie("cargas.swf",cargas);
var n_veces = 0;
var prueba = 0;
this.onEnterFrame = function() {
//obtengo el porcentaje
var valor1:Number = Math.round(stream.bytesLoaded/stream.bytesTotal*100);
conexion1 = new LocalConnection();
conexion1.send("conectar", "estado_carga", valor1);
delete conexion1;
prueba = stream.time;
if ((valor1>=12)&&(prueba>=2)) {
delete this.onEnterFrame;
stream2.play(video_tmp2);
stream2.setBufferTime(15);
stream2.pause();
var intervalID_mc : Number = timeKeeper.intervalCall(2000, 0, lanzaEstadisticos);
n_veces = n_veces+1;
//funcion para saber que el flv termino
stream.onStatus = function(infoObject) {
    if (infoObject.code == "NetStream.Play.Stop") {
       //trace("video terminado");
    gotoAndPlay(25);
//if((infoObject.code=="NetStream.Play.Start")&&(n_veces==0)){
//stream2.play(video_tmp2);
//stream2.setBufferTime(4);
//stream2.pause();
//var intervalID_mc : Number = timeKeeper.intervalCall(5000, 0, lanzaEstadisticos);
//n_veces = n_veces+1;
function lanzaEstadisticos(Void):Void {
stream2.play(video_tmp2);
timeKeeper.clearIntervalCall(intervalID_mc);
stop();

Playing two FLV's at the same time

Hello,
OK, this seems like it would be simple, but I cannot get it
to work. I have 2 flv's that have to play at the same time - one is
a prof. in front of a electronic microscope and the other is the
actual feed from the microscope - so I need them to be able to be
controlled by one set of components. So, I have tried everything in
my ability. Currently, the setup is as follows:
I have 4 layers
Actions - where this script resides
myVideo.playPauseButton=myPlayButton;
myVideo.seekBar=mySeekBar;
myVideo.volumeBar=myVolumeBar;
Player - play/pause, seek, and volume bar reside
Scope - FLV of microscope
TH - FLV of talking head
Both my Flv's have an instance name of "myVideo" and when I
test the swf, only the last layer plays and is controlled (if the
Talking Head is in the last layer that will play and vice versa).
I cannot figure out, nor find anything, anywhere on how to
control both these FLVs with only one comonent.
Any help would be appreciated.
Thanks much
Jason

Playing more than one FLV will result in more than one
NetStream object. Each NetStream object plays independently. Add to
that each progressively downloads separately so one may begin
playing before the other. Attempts to seek a point in the videos
will also be unpredictable unless cue points where added during
encoding. But then playing from the cue point is unpredictable.
The best plan for video like this might be shorter lengths or
combining into one.
You can combine the raw video files in Premier or Windows
MovieMaker and then publish and then encode one FLV.

Loading and Playing 2 videos at the same time

Hello everyone
I'm having a problem on loading and playing two videos at the same time on XletView.
The background video, I'm loading by editing channels.xml that is located at config folder into xletview folder. I've just to add the file path and when i start the video it starts playing.
But now, I have a problem. I have to load a file that is into my HD, and play it at the same time of the main(background) video.
Do anyone know how to do this?

anyone?
PowerBook G4 1.67 GHz Mac OS X (10.4.7) 1.5 GB ram

Flash causes pc to freeze when playing 2 youtube videos or flash videos at the same time

I dont know what has caused this issue but since around january my pc has been freezing to the point where i have to hard reset if i play 2 youtube videos or any flash videos at the same time. the whole pc becomes unresponsive when this happens. all my drivers are up to date so i dont know where this issue is coming from.
My specs:
Browser- Firefox 28.0
OS: Windows 7 home edition 64 bit
Case: Raidmax Platinum
Motherboard:ASUS M5A99X EVO AM3
CPU: AMD fx 8350 (4.6ghz oc)
Cpu Cooler: ZALMAN CNPS10X Performa 120mm
GPU: msi GTX 670 power edition
power Supply: Kingwin Kx 1000w
RAM:2x4gb(8gb) CORSAIR Vengeance240-Pin DDR3 SDRAM
HDD: Western Digital Caviar Blue 500gb and 640gb
Bluray: LG Bluray Drive & Burner

There's two ways you can go about this Amanda.
1. Set the length of your images for example 8 seconds each. Offset the photo's like a ladder effect and add the animating keyframes. The red dots in the image below represent the start/finish points of the animation.
2. The other option is to set the length of all the same, then use keyframes to set the start/ finish of the animation.
I always use example 1, however example 2 would probably be easier to understand?
Hope that helps
Tony

Two processes running at the same time in Lookout

I have installed Lookout 5.0 with 200 I/O Points onto our server computer. The application of motion control is next to the 200 I/O points through OPC PMAC server/client. Now I would like to have a second process in the same server for trouble shooting and testing without stopping the motion control process. However, this second testing process could have also many I/O points through Serial and USB ports. I assume that the total amount of I/O points of both processes will be greater than 200.I prefer to have independent processes for control and testing because access levels. Can I have these two processes running at the same time when needed?

Hi,
From your description you are using a third party OPC server for the motion application. You could have a second Lookout process communicating with the same OPC server with no problems, as long as you do not exceed the number of I/O points your license supports.
Also, the process you are using for testing obviously could not overwrite datamembers (or registers if you will) that would interfere in the overall application, in other words you can test your application as long as you keep the coherency of the test.
So the answer would be, yes it is possible, however you are still limited to the number of I/O's your license supports... You may even consider upgrade the number of I/O's you have in your license.
Best Regards
Andre Oliveira

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

How to insert into two differents tables at the same time

Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
Edgar

Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null

HT201236 I want to do something so simple that there are no instructions. I just need to have two windows open at the same time so I can transfer files from one to the other by drag

I want to transfer files from one device (or page ) to another by drag and drop , so i need two windows ope at the same time,
I know this can be done but I have forgotten how

Don't use any full screen options for any app that has them
Mount your device and double click on it to open it. Drag this window to the upper right of your Desktop and resize it to a bit less than half of your Desktop.
Open the next folder and position it on the lower left side and resize it so you can still see the previous window.

Can I open two Safari windows at the same time?

Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.

HI,
Open a browser window in Safari. Then Command + N
Press command and ~ or ` to toggle between the windows.
Carolyn

Is there any way to have two garagebands open at the same time?

I'm remixing a NIN song, and I need to have two garagebands open at the same time, is this possible? If so, please help!!

it is possible, but you'd be on your own if there's a prob, and you can't copy and paste between them if that's what you're trying to do

How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

Is it possible to output to div monitor and s-video at the same time?

I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

This is not possible with a mini.

Control two different parameters at the same time

Two motors were connected each other rigidly. One motor controlled torque and the other motor controlled speed. I generated some torque and speed data which represented one cycle of motion from a motor simulation. I like to send these two different data sets (torque and speed) to two different motors at the same time. Torque data sends to one motor and speed data sends to the other motor to see the response of the load profile. In order to do this, I thought about using multithread, but I am not sure it will work for this application. Usually multithreading delay the CPU time so the overall control process might be delayed, right? If you have better idea, please let me know.

If you are using one motion controller to control both motors, you will probably run into problems if you try to use multithreading on the PC. However, you can execute up to 10 programs (threads) at a time, in addition to host communication, using on-board programming. For more information on on-board programming please refer to the following tutorial: Developer Zone Tutorial: On-board Programming in FlexMotion
Best wishes!
Dawna P.
Applications Engineer
National Instruments

Its possible to stream one video at the same time to three appletv2?

Its possible to stream one video at the same time to three appletv2?

Welcome to the Apple Community.
You can't stream a movie to more than one device at a time from iTunes. You can however stream the same (or indeed a different) movie from multiple Apple TVs although they won't necessarily be in sync.

Two flv videos at the same time

Similar Messages

Maybe you are looking for