Two Functions not working

Auto-resizing of salad picture on header bar is not working. I have followed the instructions step by step, not sure what I am missing.
Also, the 100% width toggle does not seem to exist on my control panel.
Thanks for the help!

Auto-resizing would work if you are using any container fill with image , it depends upon position and type of fill used.
If you simply placing an image on page then you would need to resize that manually.
100% toggle button would be active for only the contents which can be made full width for example , slideshow, rectangle etc , it would not be active for objects which are not supported for 100% width.
Thanks,
Sanjit

Similar Messages

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Copy/paste function not working in Firefox 22. Always good in previous versions

Copy/paste function not working in Firefox 22. Always good in previous versions editions

Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P.

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

MDX -Children count function Not working in Case statement

Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
Santosh

Hi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support

Palm Desktop 6.2.2. and Lookup function not working in Windows 7

Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Keyboard + mouse functions not working

After updating InDesign CC 6-days ago started to have issue with all keyboard + mouse functions not working ex. shift key does not constrain proportions when scaling. A restart fixed the issue thr first time. Today I have installed latest update and shut down and restarted several times does not fix issue. On a MacBook pro running OS X Mavericks 10.9.2.

Disconnected extrenal devices ie keyboard and Wacom Bamboo tablet and restarted computer seemed to correct the issue.

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..

It works when I reset my all settings...
Settings>general>reset>reset all settings
It never delete ur all contacts and any others,but ur wallpaper and wifi connection will change..it can be as before...

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT1977 I bought apps. My kid delet that after few weeks. Then I have downloaded to same ipad. But some functions not working.

I purchase some apps, my son deleted some. But I have download again from cloud. But some functions not working ask me to pay again. How can I use functions without paying again. Thank you

Search around on the app settings and see if there's a "Restore purchases" option.

After upgrading to maverick; help & other functions not working

After upgrading to maverick; help and other functions not working?

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Trackpad two- and three-finger functions not working

Everything was fine last night, but when I turned on the computer this morning, the trackpad is not working correctly. Cursor movement with one finger feels different than normal (a bit sluggish) and two- and three-finger functions such as scrolling, enlarging, and navigating forward and back do not work. I have tried letting the computer sleep first, rebooting, shutting down and turning back on, and the trackpad firmware update from last November (which it said I did not need to update) and nothing has worked. The trackpad menu in the System Preferences offered nothing as well. I have not updated to Snow Leopard.
Thanks in advance for your help.

Hi
I had the same problem specially after carrying out the last update 4.3 the battery was draining very fast y. In addition to that the phone freezing initially for few minutes then for almost a day and finally continuously.
I did almost every thing but replacing the handset and non worked.
As a final attempt to fix the problem before I replace the unit and get a new one was to
1. connect the phone to the my computer (Mac)
2. Launch iTunes
3. Restore the phone to factory setting (with the 4.3) upgrade.
Of course I lost every thing my contacts all of my apps and phone settings. But it worked it has been two days now the phone didn't freeze and the battery life is even better than before.
Note:
1. All of my contacts, note, calendar, emails were backed up using my company exchanger
2. Before restoring I listed all of the apps that were installed and I reinstalled them one by one all over again.
Try this solution and I hope it works with you.
Regards
Ana Al Khanajri
iPhone 4 iOS 4

Quick launch buttons and touch functions not working post win7 upgrade

I have several problems that I think are related.
1) When I rotate the screen and then bring it close (as in flat) to the keyboard, the screen goes blank. There is no key combination I can find that restores the screen. Putting it back in notebook orientation doesn't do anything either. Only thing to do is a hard reboot.
2) the quick launch buttons on the screen edge are not functioning as follows:
a) the hp mediasmart button (the one with the wave) doesn't work
b) the screen rotation button produces the same problem as 1) above
c) the third button which looks like either gears or a sun (I don't know what it should do) brings up the windows mobility center, where I have found problem number:
3) On tablet PC settings, the display tab, there is one display: 1. mobile PC display
on the same tab, there is a setup button. The next screen says:
pen input
touch input
Regardless which one I select, on the following screen (where it says Press this screen with ....) when I press with either my finger or the pen, nothing happens. Which seems like either:
it thinks another screen is active or
the touch components are completely non functional.
4) Not surprising, the touch functions are completely non-functional
I have installed all of the drivers for this TX2-1025dx for Win7(64bit) per the HP support/drivers page.
Not all of them resulted in a clean install.
Here are other drivers that I had problems with (meaning that I got an error message, it failed, it had to be done more than once, something else broke, etc.)
AMD AHCI - started catalyst installer then failed
Authentic fingerprint driver - "dpinst64 not marked for installation"
Ntrig Duosense - had to do this one multiple times to get the fingerprint reader to work
HP Mediasmart MVP - hung in CMD
I have checked that all of the startup services are actually enabled in msconfig including quick launch buttons, hpwuschd, and media smart. Nothing is disabled in services.
I have reinstalled the quick launch buttons driver for this product from December 2009. (There is an earlier version from November.)
I installed the bios upgrade (before win7, actually) it is currently F.25
I have also eliminated EMF possibilities.
I have searched the forums, and while I have found some interesting clues, I don't see anything like this - at least with a solution.
Any assistance would be greatly appreciated as this thing is quite useless to me as it currently functions. It is not a tablet anymore.
TIA

[knock knock] Helloooooo??!!??
Installed 6.50.9.1, which is in between the last two quick launch button (QLB) drivers (that did not work). Also fixed the lightscribe and mediasmart DVD installs. Same problems, no touch or pen, and a new bug I discovered with qlb
First, if you search for tablet in the start menu, there is a selection to set the tablet buttons to perform certain tasks. When you run that, it says that teblet buttons are not installed on this pc. Doesn't matter if QLB is installed or not - same error. Hmmmmm. Check with your pc manufacturer..... I think I am doing that. I am starting to feel like I am working for HP.
Next finding: Using mobility center, I found that if you orient the screen to landscape for the slate config, and then rotate the screen, it does not go blank. However, if you rotate the screen back to notebook, it goes blank. And of course it keeps that upsidedown config when you reboot, too. So, the way to recover from that (because you really need a keyboard if you don't have a working pen and touch takes 30 sec to respond) is to keep trying to get touch to orient the screen back to landscape for notebook. Then rotate the screen to landscape for notebook. And uninstall the QLB driver that doesn't work and reboot. But after that, touch and pen did not function.
Since touch and pen had previously been restored when I uninstalled QLB, I reinstalled MVP and smartmenu coz they were the actions that I took the last time before touch and pen returned. Didn't work this time, tho.
I decided to do a system restore back at the point that I had used HP Advisor, since that was the last time I made note that pen and touch were working. Restore failed because a sfi.dat file was not found (and search didn't find it anywhere either). I tried 5 different restore points, before and after that one, and they all failed. But the first time around, I had touch on the logon screen, just not after windows started. The next time, I had touch but not pen. The next time, I had touch and pen, but only for a period of time (I think HP Advisor may have been the intervening event) before they stopped working.
Oh, and HP advisor does not appear to be actually installing the things on the action list. That could be an issue with Comodo, but it really looks more like an issue with that "mother may I" message from Windows asking for permission to run the program. Often as not, windows reports that the program is not responding. Closing the program with that dialog box actually gives it the kick in the knickers it needs to complete.
A not so great workaround is to use the mobility center to orient the screen when you want to put the thing in slate mode. You can pin it to the task bar (with a little fiddling). Touch is extremely slow to respond in slate mode. For example, it took about 3 minutes to get the screen oriented back around to notebook config, which is 4 "clicks" if things are working right. Pen works sort of OK (although I haven't tried any writing) . Gestures for scrolling do not work.
I am done with the troubleshooting until someone comes up with other targeted ideas.I have been keeping detailed chrono notes.
Again, I hope the information here leads to a solution. This unit is not a functional tablet and I don't want to stay with Vista, neither should I have to since this is supposed to be compatible.

Two Functions not working

Similar Messages

Maybe you are looking for