Two hard drives are better?

I am running Windows ME on my PC
And now I want to install Solaris on the same PC
is it better off having two hard drives to run two different OSes ?
or partition my 30GB hard drives is far enough?
Thank You

Go with two drives. I learned a long time ago that it is very easy to switch between physical drives using a removable drive system. When learning a system, I sometimes corrupt operating system files beyond repair or learn a new way of doing something. It is much easier to use and reload a single drive without fear of corrupting anything on another drive. The whole process is relatively cheap compared to the value of your time.

Similar Messages

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
Thanks for your prompt response,
Dick Deaton

Do I still need two hard drives for video editing today?

I have heard time and time again that editors should use two hard drives when editing in Final Cut Pro, it was even written in part of the Final Cut Pro 7 user manual. One was used for the system and Final Cut Pro software and the other was used for storing video.
Is this still true with the newer SSDs available today? Since they do not use a rotating disk, can't my video and Final Cut Pro X work to maximum performance? Or is it still a bad idea to have your video and software on the same drive?
I would be curious to what some have to say and thank you in advance for your help.

Will it work on one drive ?.. in short Yes. Will it work well when I start doing multiclips with lost of angles and a separate track all being ingressed from HDV and wav? .. I suspect not so well .. You see the bottom line is that you are correct in so far as SSD's have no moving parts but the input/out speed (I/O) is not all that fantastic. Multiple video streams when doing multicam (for example) will cause a huge data quantity needed at fast speeds to be shipped back and forth .. SSD's are fast at boot up but after that the there is not all that between them and ESATAII internal drives (I have four ESATAII in my Mac Pro)..
Best practice advice is to have a fast separate drive, preferably connected via Thunderbolt or FW800. The whole thing just works more efficiently and - better. All in all I would say yes if you can afford it and are going to be doing lots of editing which gets more advanced you will not regret the second drive investment.
Jim

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Well, yes, data does get corrupted sometimes.
The trick is finding what data.
By 'cleaned' are you therefor meaning that the drive has been erased and the system re-installed?
Because that's the quickest way to deal with such a situation.
Back up the system first of course,
Add back 3rd party apps one at a time in case one of them is causing the problem.

HT1386 Ever since I had to replace my PC hard drive, my outlook contacts and calendar no longer sync. It acts like it's syncing, but it isn't. I now have two hard drives - c and g, but I'm pretty sure the Outlook data is still on c. Any other ideas?

Hello - I just had to replace the hard drive on my pc, and now my Outlook calendar and contacts won't sync to my iphone 5s. I ended up getting two hard drives (C and G), so I'm afraid that might have something to do with it - although I'm pretty sure Outlook files still live in the normal place on C. Itunes sync acts as if it's working, but nothing changes on my phone. Any ideas? Thanks!!

"2MEM/1/4: DIMM3/J14"
Replace the memory in the DIMM 3 slot.
If you are running Mac OS X 10.5 you can use this program to test your G5's memory:
http://www.kelleycomputing.net/Rember/
It will subject your RAM to a more thorough test than Apple Hardware Test.

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Two hard drives connected to Airport Extreme. How to include one of them in TimeMachine Backup and use other disc as Time Machine backup disc?

Hi,
the title says it all. I've got an airport extreme and two hard drives connected to it. My idea was to use one as my additional storage (say DISC STORAGE) and the other one as my backup drive (say DISC BACKUP). I would like to backup my mac AND DISC STORAGE together to DISC BACKUP using time machine. My mac has 256 GB HDD, DISC STORAGE is 1 TB big, DISC BACKUP 2 TB. So there are no space issues.
Problem: DISC STORAGE is not included in Time Machine's backup to DISC BACKUP. At the moment, only the mac is backed up to DISC BACKUP.
Does anybody know if and how I can include DISC STORAGE in the backup process?
By the way, DISC STORAGE is not listed in the "exclude from backup" list in Time Machine.
Thanks!
Arne

Unforrtunately, Time Machine cannot backup from a network drive to another drive. Time Machine will only backup a Mac and a drive that is directly attached to the Mac, via USB or FireWire.
You will need to use an application like Carbon Copy Cloner or SupoerDuper to be able to backup from DISC BACKUP to DISC STORAGE.

Migration two hard drives

I tried migrating to my new macbook from a g4 tower with two hard drives. When I hook the fire wire up it only sees the non startup disk and will not see the startup disk on the g4 all my music and photos are on the startup disk which is what I wish to migrate. How do I get the macbook to see the startup disk on the g4?

That's really not an iTunes question, so this probably isn't the best place to ask.
Answering quickly, though, Fireware Target Disk Mode only will show the drive that the Master on the ATA bus, regardless of which drive is set as the boot. So if your boot drive is a Slave, it won't show; you'll have to switch the drives around on the ATA bus.
For further assistance, please take this up in the appropriate PowerMac G4 forum.
Regards.

Consolidating two hard drives without duplicating songs?

I have two hard drives full of music. Each drive has about 300GB of music each. 90 percent of the music on each drive is the same(copied from one drive to the other over time). However, about 10 percent of the music is different on both drives. If I consolidate the music of both drives is it going to create a 600GB music library or does it recognize similar songs and not copy duplicate songs?
Thank you for your help
Brian

Open Disk Utility, which is located in Applications/Utilities/ folder.
Look at the sidebar. You should see the connected storage devices. The devices (or drives) are listed flush against the left edge of the sidebar. Indented to the right, below each device, you should see the volumes on that device. Normally, there should be one volume under a device.
Describe what you see? Where is the "(2)"? Is it under a device by itself, or is it with another volume under a device.

Operating system not found when deploying to machines with two hard drives using MDT 2013.

Computers with two hard drives will not boot after the install OS step in the task sequence. I get the "An operating system wasn't found. Try removing drives that don't contain an operating system" error. I am able to get the
machine to boot by swapping the hard drives' boot order, but the task sequence won't complete after this. The deployment works fine on machines with one hard drive, and I'm not getting any errors from the task sequence. I'm deploying windows7
enterprise x64 using MDT2013. This is a new custom image and task sequence generated using MDT2013. I can't remove the second hard drive because there are scripts that run on the second hard drive during deployment and also because I don't desire
to remove and re-install 250 hard drives. I've not experienced this problem with earlier versions of MDT.

The bdd.log file you sent does not show two internal drives, it shows only one.
Console > Please wait while DiskPart scans your configuration... ZTIDiskpart 12/16/2013 9:57:04 AM 0 (0x0000)
Console > DiskPart has finished scanning your configuration. ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk ### Status Size Free Dyn Gpt ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > -------- ------------- ------- ------- --- --- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk 0 Online 60 GB 60 GB ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume ### Ltr Label Fs Type Size Status Info ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > ---------- --- ----------- ----- ---------- ------- --------- -------- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume 0 D DVD-ROM 0 B No Media ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Is this the problem?
Keith Garner - keithga.wordpress.com

Two hard drive icons on my desktop, would like to have only one...

Hello everyone, I recently got a PowerMac G5 (I think it's a 2.3 GHz). It came with a hard drive inserted 'Untitled', which came from my old 1.6 GHz G5. On the desktop though, I get two hard drive icons, my main start up drive called 'Untitled', and another one called 'Spare'. I was told that my G5 has only one drive inserted 'Untitled', so I'm trying to either get rid of 'Spare', or merge it somehow into 'Untitled'. Under the Volumes folder, I was not really able to get rid of it, is this something to do with Disk Utility?
BDAqua - under Get Info, when I was on Leopard, I tried changing a User Permissions category called 'Everybody' from Read Only to Read and Write. Upon restart two days later, Leopard would not start up (loads of writing on the screen, with the Mac power button, asking me to restart). To cut a long story, I am now back on Tiger lol (Leopard issues for another discussion lol), so now I dare not play with anything which says Read Only, especially when it's probably not even necessary. I am writing this from the library, so don't know what exactly it says in Get Info - User Permissions for either drive at the moment. If this is relevant, I can have a look later and post back, I'll also verify permissions in Disk Utility for both drives, but I think they are fine. Actually, when I was on Leopard, my 'Untitled' drive took ages to verify permissions, and always loads of writing appeared! Now that I'm on Tiger, the other day when I verified Disk Permissions, it was quick and fine!
Thank you
In the screen shots, 'Untitled' is model ST31, 'Spare' is model WDC

Hi BDAqua, sorry I should have just opened it in the first place! I don't know why that man told me there was only one hard drive inside, perhaps a misunderstanding.
It seems that there are actually two hard drives inside, one in A, and one in B (see photo)! So, if this is the case, I don't have a problem with the two hard drive icons.
I guess if a G5 shows two hard drives on the desktop, then there's two hard drives in the machine!
Thanks for helping anyway.

Since upgrading to Mavericks my Interface and hard drive are shutting down when Mac put to sleep

Hi,
Since upgrading to Mavericks, when I put my Mac to sleep both my audio interface and my time machine hard drive are put to sleep also. Effectively making it so that when I start up my macbook again it means removing both the aforesaid from the usb outlets and putting them in again so that the mac recognises them.
This means two things. First of all all my time machine backups fail that are attempted whist the mac is put to sleep, whereas before they succesfully ran. It also means that my audio interface does'nt work and has to be re-set.
Anybody have the same kind of USB / Sleep issues?
Many thanks in advance.

Hello jamieesa,
You might cosider resetting your system's SMC and PRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/PH14222
Cheers,
Allen

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.

Some folks recommend OmniDiskSweaper to allow you to review your stuff to find possible candidates to throw away.
Even if you throw away some stuff and your desired "1.98GB", then what? If that's the number you need for the update, you'll just use most or all of the reclaimed space with the update and you are right back to where you started.
You don't specify what kind of machine you got but presumably it's a mac pro since you posted in the Mac Pro community. In which case just get yourself another drive or two and move stuff around to free up your boot drive.
[Perhaps you should hurry too since I expect hdd prices might be going up due to possible impending hdd shortages.]
Finally, if some of those updates are major system updates you want extra drives for backups because I always recommend you never do major updates to your system without backups to that system.

For those of you using two hard drives..........

I have two hard drives, and really want to set them up properly so that logic is running on the main drive, and the secondary drive is for audio/samples etc. So for those of you that have done this, what is the best way? Specifically -
1. For the EXS24- do BOTH the instruments and samples folder need to go on the secondary drive?
2. If you've already been using one drive for everything, how do you re-train logic to see the exs/audio folders on the secondary drive? Is it just a matter of moving them and then redirecting logic when it can't find the files?
Your input on the best way to utilize two drives is most appreciated - what has worked for you, and what hasn't.

. For the EXS24- do BOTH the instruments and samples folder
need to go on the secondary drive?
Leave the instruments folder where it is, and put your samples folder on the external drive.
You can alias the instruments folder to whereever you want, but you don't really get any performance advantages doing so.
2. If you've already been using one drive for everything, how do you
re-train logic to see the exs/audio folders on the secondary drive?
Two things to note - you don't need to do anything. When the EXS24 loads an instrument, if the samples are not at the location specified in the instrument, it will search for them, and when it finds them, it will write the new location back to the instrument so next time it won't have to search.
So, if you've moved your sample folders, the first time you access an instrument it will take some time to load while Logic hunts for the samples. Subsequent loads of that instrument will be as fast as ever.
Now, you can use the Project Manager (or Redmatica's EXSManager) to do this relinking for you across multiple instruments or your whole library.
In the PM, do an expanded scan. Then, select your instruments, and choose the "resolve samples" function - Logic will relink instruments with their samples and update the instrument files with the new locations. This can take some time with a big library.
Any more questions, post back.

Two hard drives are better?

Similar Messages

Maybe you are looking for