Two hard drives or one to used with Parallel

Hi everyone,
I recently bough my first MAC (27 Imac). Unfortunately I have my work life on PC; therefore, I already own programs such as Autocad and Quickbooks. I would like to used Parallel or VM to have access to those files, since they are not available or I already have them. My question is: should I get two hardrives to run parallel, one with lots of storage, or an external thunderbolt. I'm confuse to which way I will get the files to open, save and render the quicker. Thank you in advance for all your replies.

Parallels will manage the hard drive for you. You do not have to have a second physical drive to run Parallels.
It is possible to use Parallels with Boot Camp, which lets you boot the Mac as a native Windows machine. I do not recommend this unless you are a gamer. For AutoCad and QuickBooks, there is no need for a Boot Camp partition.
You can let Parallels set up a TIme Machine backup. If you follow the directions in Parallels, this will be a backup that only backs up what has changed, not the whole Parallels virtual disk, so it does not blow up Time Machine.
I use Parallels for Quicken and for a Polar Heart Rate Monitor. It works great. It is outstanding in the latest version with OSX 10.7 Lion, because you can run your Windows machine (or your Windows Apps) in Full Screen mode and flick between them and your other Mac screens with a finger swipe on your Trackpad.

Similar Messages

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

Converting an external Hard drive into FAT32 for use with a PS3.

Hello. I am having trouble and wondering if anyone can help me. I have an external Hard drive (250 gigs) that is completely empty. I am trying to format it to FAT32 So I can use it with a PS3 but I am having a hard time doing so and can't fins a topic that actually tells you how to do it. Does anyone know how? thanks in advance!

Open Disk Utility in Applications Utilities.
Select the Drive on the left, not the indented Partition below that, it'll likely have the Size & Make of the Drive.
Select the Erase Tab, select the Volume Format Pulldown menu, choose MS/Dos, if you don't see that choice you have the Partition selected.

Want bigger hard drive and replace boot camp with parallels

Bought the 15" MBP on day one now more than two years ago. The 80 gig hard drive is nowhere near enough now and having to essentially shut down to run boot camp no longer works (I'm an accountant and need to be able to flip back and forth quickly).
Two questions:
1) Can I add a much bigger hard drive to my original version MBP?
2) If so, can I expand my pitiful 5 gig boot camp windows partition to, say, 20 gig and have parallels run it without having to reinstall all the windows programs?
That would be my perfect world, is it possible?

Are you under warranty? If so, you would probably want to get an Apple authorized repair shop to replace the hard drive so you don't risk voiding your warranty. But you can replace it with a much larger one, like the 320 GB Western Digital or the 500 GB Samsung if you can find one. There is another thread on this forum concerning the 500 GB drives. Not all 500 GB drives will fit in a 15" MBP--some are too tall.
Not familiar with either boot camp or parallels, but with the bigger drive, you should be able to easily have a bigger partition for windows. As to whether you would need to reinstall the windows programs, someone more familiar with windows would have to address that part of your question.
Good luck!

Two hard drive icons on my desktop, would like to have only one...

Hello everyone, I recently got a PowerMac G5 (I think it's a 2.3 GHz). It came with a hard drive inserted 'Untitled', which came from my old 1.6 GHz G5. On the desktop though, I get two hard drive icons, my main start up drive called 'Untitled', and another one called 'Spare'. I was told that my G5 has only one drive inserted 'Untitled', so I'm trying to either get rid of 'Spare', or merge it somehow into 'Untitled'. Under the Volumes folder, I was not really able to get rid of it, is this something to do with Disk Utility?
BDAqua - under Get Info, when I was on Leopard, I tried changing a User Permissions category called 'Everybody' from Read Only to Read and Write. Upon restart two days later, Leopard would not start up (loads of writing on the screen, with the Mac power button, asking me to restart). To cut a long story, I am now back on Tiger lol (Leopard issues for another discussion lol), so now I dare not play with anything which says Read Only, especially when it's probably not even necessary. I am writing this from the library, so don't know what exactly it says in Get Info - User Permissions for either drive at the moment. If this is relevant, I can have a look later and post back, I'll also verify permissions in Disk Utility for both drives, but I think they are fine. Actually, when I was on Leopard, my 'Untitled' drive took ages to verify permissions, and always loads of writing appeared! Now that I'm on Tiger, the other day when I verified Disk Permissions, it was quick and fine!
Thank you
In the screen shots, 'Untitled' is model ST31, 'Spare' is model WDC

Hi BDAqua, sorry I should have just opened it in the first place! I don't know why that man told me there was only one hard drive inside, perhaps a misunderstanding.
It seems that there are actually two hard drives inside, one in A, and one in B (see photo)! So, if this is the case, I don't have a problem with the two hard drive icons.
I guess if a G5 shows two hard drives on the desktop, then there's two hard drives in the machine!
Thanks for helping anyway.

Two hard drives

I have two hard drives. One is meant to be a backup drive. The problem is that my catalogue is getting half the pictures from one drive and half from the other. How can I make it get all files from one drive? I am using LR4.

Move the files from the backup disk to the main disk. I recommend doing this using the OS Move command or dragging and ropping rather than Lr as it has a habit of loosing the files if the application happens to crash during the move. Also, the OS will leave a copy of the original on the backup until you manually delete it. After moving the files (really a copy) you can use the method described in following tutorial to relink to them in Lightroom http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm (see section titled 'Updating Folder Location'.

HELP, I have Itunes installed on two hard drives, need to consolidate!

I moved Itunes to a new hard drive on my computer a while ago (I didn't do it properly and it's been a headache ever since). When I downloaded the new version of Itunes it was installed on my main hard drive by default. All the music I had before is still on the new hard drive but since I've installed the latest version of itunes all the music I've loaded onto Itunes has been stored in my main drive. I now want to download the latest version of Itunes but do it on my new hard drive, but how do I do that and keep my playlists the way I already have them set up AND transfer the music that's on my main drive onto my new drive and keep everything in Itunes from changing?
Thanks,
Sean

It is hard to tell exactly what the problem is from your description.
I think you have two hard drives in one computer. It is normal to install iTunes on the system drive, this doesn't stop you having music on the other drive.
The important thing is the location of the iTunes Music folder. This is set up in:
Edit>Properties>Advanced>General
My guess is that when you installed iTunes, it defaulted to setting the iTunes Music folder on your system drive.
It is hard to tell you what to do without knowing a little more.
Is the music on your new drive in your library? And what is the current setting for you iTunes Music folder?

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

HT201250 I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

Operating system not found when deploying to machines with two hard drives using MDT 2013.

Computers with two hard drives will not boot after the install OS step in the task sequence. I get the "An operating system wasn't found. Try removing drives that don't contain an operating system" error. I am able to get the
machine to boot by swapping the hard drives' boot order, but the task sequence won't complete after this. The deployment works fine on machines with one hard drive, and I'm not getting any errors from the task sequence. I'm deploying windows7
enterprise x64 using MDT2013. This is a new custom image and task sequence generated using MDT2013. I can't remove the second hard drive because there are scripts that run on the second hard drive during deployment and also because I don't desire
to remove and re-install 250 hard drives. I've not experienced this problem with earlier versions of MDT.

The bdd.log file you sent does not show two internal drives, it shows only one.
Console > Please wait while DiskPart scans your configuration... ZTIDiskpart 12/16/2013 9:57:04 AM 0 (0x0000)
Console > DiskPart has finished scanning your configuration. ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk ### Status Size Free Dyn Gpt ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > -------- ------------- ------- ------- --- --- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk 0 Online 60 GB 60 GB ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume ### Ltr Label Fs Type Size Status Info ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > ---------- --- ----------- ----- ---------- ------- --------- -------- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume 0 D DVD-ROM 0 B No Media ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Is this the problem?
Keith Garner - keithga.wordpress.com

Two hard drives connected to Airport Extreme. How to include one of them in TimeMachine Backup and use other disc as Time Machine backup disc?

Hi,
the title says it all. I've got an airport extreme and two hard drives connected to it. My idea was to use one as my additional storage (say DISC STORAGE) and the other one as my backup drive (say DISC BACKUP). I would like to backup my mac AND DISC STORAGE together to DISC BACKUP using time machine. My mac has 256 GB HDD, DISC STORAGE is 1 TB big, DISC BACKUP 2 TB. So there are no space issues.
Problem: DISC STORAGE is not included in Time Machine's backup to DISC BACKUP. At the moment, only the mac is backed up to DISC BACKUP.
Does anybody know if and how I can include DISC STORAGE in the backup process?
By the way, DISC STORAGE is not listed in the "exclude from backup" list in Time Machine.
Thanks!
Arne

Unforrtunately, Time Machine cannot backup from a network drive to another drive. Time Machine will only backup a Mac and a drive that is directly attached to the Mac, via USB or FireWire.
You will need to use an application like Carbon Copy Cloner or SupoerDuper to be able to backup from DISC BACKUP to DISC STORAGE.

Using two hard drives with Boot Camp?

Hi,
I have two hard drives in my mac pro. They both show up on the mac side but when I use windows only the one shows up. Is there a way to have access to the second hard drive using windows?

You need to install a product like MacDrive. This will enable Mac OS Extended format support for Windows. Be aware that if you do something like this all of your Mac files and OS will be vulnerable to Windows "issues" such as viruses and spyware etc. It is NOT recommended.

How can I use a firewire hard drive on a new Macbook with one USB-C only?

How can I use a firewire hard drive on a new MacBook with only one USB-C?

kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will. However, there is no such thing as a FireWire Hard Drive. There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure. If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

For those of you using two hard drives..........

I have two hard drives, and really want to set them up properly so that logic is running on the main drive, and the secondary drive is for audio/samples etc. So for those of you that have done this, what is the best way? Specifically -
1. For the EXS24- do BOTH the instruments and samples folder need to go on the secondary drive?
2. If you've already been using one drive for everything, how do you re-train logic to see the exs/audio folders on the secondary drive? Is it just a matter of moving them and then redirecting logic when it can't find the files?
Your input on the best way to utilize two drives is most appreciated - what has worked for you, and what hasn't.

. For the EXS24- do BOTH the instruments and samples folder
need to go on the secondary drive?
Leave the instruments folder where it is, and put your samples folder on the external drive.
You can alias the instruments folder to whereever you want, but you don't really get any performance advantages doing so.
2. If you've already been using one drive for everything, how do you
re-train logic to see the exs/audio folders on the secondary drive?
Two things to note - you don't need to do anything. When the EXS24 loads an instrument, if the samples are not at the location specified in the instrument, it will search for them, and when it finds them, it will write the new location back to the instrument so next time it won't have to search.
So, if you've moved your sample folders, the first time you access an instrument it will take some time to load while Logic hunts for the samples. Subsequent loads of that instrument will be as fast as ever.
Now, you can use the Project Manager (or Redmatica's EXSManager) to do this relinking for you across multiple instruments or your whole library.
In the PM, do an expanded scan. Then, select your instruments, and choose the "resolve samples" function - Logic will relink instruments with their samples and update the instrument files with the new locations. This can take some time with a big library.
Any more questions, post back.

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?

"You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
Mac 101: Time Machine

Two hard drives or one to used with Parallel

Similar Messages

Maybe you are looking for