Two IDOC's are getting generated...!!!

Hi,
When i issue output to a material document through MB02, two IDOC's are getting generated.
Any idea about this?
Thanks in Advance,
Phani.

Problem was, I was calling MASTER_IDOC_DISTRIBUTE FM in process code FM to generate the IDOC...!!! which is not required.
Regards,
Phani.
Message was edited by:
Sivapuram Phani Kumar

Similar Messages

.css and .swf files are getting generated with Ibot email

Hi Team,
I have an Ibot which use to run on daily basis which contains graph and normal table views, .css and .swf files are getting generated and attached with Ibot email to the users. I'm facing this issue from last two days. Earlier there was no such attachments sent to the users.
Could anybody let me know what might be the reason for that?

any inputs?

When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

Hi Experts,
When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
Regards,
Sameek

Hi Sameek,
Please refer the below link. Hope it helps.
http://scn.sap.com/thread/1435286
Regards,
Chandan.

Outbound IDOC WPDTAX not getting generated

Hi
I am not able to generate outbound IDOC WPDTAX through WPMA transaction.
We are using TAXUSJ as the tax procedure.
Tax Condition type UTXJ and JR1 has been maintained in the system.
On looking at the code against WPMA ,
POS_TAX_GET is called to calculate taxes.
It does not have a fetch against all the condtion tables for tax.
The above condition has been maintained in table A053.While the above program fetches data against only A003.
Can somebody help?
Regards,
Amit.

Hi Amit,
For TAXUSJ, the conditions maintained are time dependent conditions.
However , IDoc type WPDTAX01 does not support time dependent conditions.
Only time independent conditions will be transferred with the help of Idoc type WPDTAX01.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/3f/81e33bfa5d11d38d1f080009d10d9a/frameset.htm
Regards,
Lisa

My parents have one apple id and me and my two other siblings are getting our own. How can I transfer the data saved on the parent apple id to all three kids apple ids?

Me and my siblings all want our own apple ids, and my mom has the apple id that has all of our games, apps, movies, and music on there. how can we copy the data onone apple id to the three kid accounts?
thanks!

Sorry, but unless I misunderstand what you're asking, you can't. Purchases from the iTunes Store are permanently tied to the Apple ID through which they were purchased. If your parents want you to be completely independent of their Apple ID and iTunes Store account, you'll each have to re-purchase the apps, etc. Otherwise they'll have to continue to allow you access to their account, or will have to do all the updates for you.
Regards.

Why Rowwids are getting generated in OBIEE physical generatedquery

Hi All,
Why OBIEE physical generated query ( backend query ) is added his own conditions ( something like below ) other than specified in RPD in where clause while generation backend queries.
Also, in my case in environment where clause is adding his own conditions like below and in another environment it is not... why???
and (T123456.ROW_WID in (6.0, 9.0, 11.0, 16.0, 2002.0, 2003.0, 2004.0, 5009.0, 5010.0, 5011.0, 6006.0, 24001.0, 26001.0, 26007.0, 26009.0, 26011.0, 26013.0, 26015.0, 26017.0, 26019.0, 26028.0, 27005.0, 27007.0, 27009.0, 27020.0, 98006.0))
and (T654321.SOMETHING_WID in (6.0, 9.0, 11.0, 16.0, 2002.0, 2003.0, 2004.0, 5009.0, 5010.0, 5011.0, 6006.0, 24001.0, 26001.0, 26007.0, 26009.0, 26011.0, 26013.0, 26015.0, 26017.0, 26019.0, 26028.0, 27005.0, 27007.0, 27009.0, 27020.0, 98006.0)) )
Regards,
Chandra

Hi Srini,
Thanks for the reply..
I checked in both environments already, there is no conditions under Content tab where clause.
Not only in this backend query, i thought BI server will automatically generate this where conditions in all physical generated queries. but it will not differ in Results.
In this cast results also differ. Could you please let me why OBIEE generates this addtional where conditions.
Do I need to check any join conditions in rpd??
Thanks
CHANDRA

Lot of Archives are getting generated due to db block changes in table fnd_concurrent_requests and fnd_concurrent_queues

Hi Guys,
In our R12.1.3 EBS RAC Production Database (Size ~ 450GB), found heavy archives generation which almost 200GB - 250GB daily from past couple of months (Due to which our Standby/DR database have been lagging). After taking AWR Reports for last 3 months, I've found that fnd_concurrent_requests and fnd_concurrent_queues are 2 heavily redos transnational tables. (from db block changes section). Also the same confirmed from dba_hist_seg_stat, dba_hist_seg_stat_obj & dba_hist_snapshot tables. Purge Concurrent Request and/or Manager Data request has been scheduled with ALL, age, 14 days parameters.
We have also done re-org activity on these tables, but still no luck. is there any way to reduce archives generation on due to these FND% Tables ? is there any other request for purging ? any help would be appreciated.
Thanks in Advance,
Regards,
Manish Nashikkar

Have you checked the contents of those archived log files?
Do you purge FND_CONCURRENT% tables (and other tables) on regular basis? -- https://community.oracle.com/search.jspa?q=purging+strategy+EBS
Please see previous threads which cover the same topic -- https://community.oracle.com/search.jspa?q=too+many+archived+log+files
Thanks,
Hussein

Two accounting documents getting generated in FBCJ, please guide?

Hello,
In FBCJ, two accounting documents are getting generated for one line item, please guide how to reverse only one document and to avoid recurrence in future?
Thanks,
Varghese

Hello,
As I understand you created separate line items as check receipts with same check number and amount and posted the same. It means that, system generated two FI documents. Basically when you receive checks from your customers system generates two accounting entries in the FBCJ. Now you want to reverse the one the these documents. Am I right? Now you can select one of them, click delete mark button. Just check again it is problem with selection of line items.
Regards,
Vasif

Why two remote keys are genrated in data manager when i'm syndicating the same records twice

Hi Experts,
Please guide me that will there be any problem if two remot keys are getting generated for the same system thougt we are expecting to update the same Business Partner Number in ECC.
Also We are able to see two different business partner number(in ECC this is KUNNR in KNA1)
Please guide me how to proceed so that when we syndicate the same set of records we want to get update the records in ECC for the same KUNNR.
We don't want to get another KUNNR for the same records.
Thanks!
Pankaj

"barbara" wrote in message
news:506500000008000000FAC20000-1077587809000@exchange.ni.com...
> I'm using the simulation interface toolkit V2.0 but it works only the
> first time after the installation. When I restart again my computer it
> doesn't work any more. Why??????????
>
---snip
I am not familiar with the different software that you mentioned but as a
first step I would check compatibility which is done as below:
Get original operating system CD that was used to install Windows XP on the
machine in your post. When Windows XP is inserted into CD ROM drive it
normally will ask you to conduct compatibility check for the current
installation. See what it says.
HTH
Mohan Pawar
----snip

STPPOD.DELVRY03 idoc not getting generated

Dear Experts,
I have done the following settings for STPPOD.DELVRY03 but still idoc is not getting generated when i am posting goods reciept using VL32N
1) For Confirmation control key selected A-Always POD Relevant
2) For Item category ELN POD Relevant X and POD Automatic
SAP->Customizing Implementation Guide -> LogisticsExecution ->Shipping
->Deliveries ->Proof of Delivery ->Set POD-Relevance Depending on
Delivery Item Category
3) In Vendor Master the field "POD-Relevant" is assigned the value "A".
   4) In NACE settings
          Application:E1
          condition records & output type:OPOD
          Delivery type:EL
          Function:LS
4) In pratner profile
              Partner Type-->LS
              Partner Role --> blank)
               Message Type-->STPPOD
               Basic Type ->DELVRY03
              and under message control
              Application->E1
              Message Type
              Process code-->OPOD
Please suggest me if I am missing out on someting.
Thanks
Gaurav Gupta

Hi Gaurav,
Typically for STPPOD Idocs, the NACE and WE20 Settings are maintained at Vendor Level. Try changing your settings and see if it works.
Refer this link for further details : Re: STPPOD triggered sending wrong material from SAP to SNC
Thanks,
Bharath

Filtering the XMLs that get generated from IDOC

Hi All,
I have requirement to filter the XML files those get generated when a BP relationship is created. The required configuration has been done. The XMLs are getting generated, but I want to generate the XML is only if it is Contact Person Relationship.
Can somebody tell me how I can achieve it?
Regards,
- Prasenjit

I am using an extended version of CRMXIF_PARTNER_REL_SAVE IDOC and in TCODE we21, I created an XML File port. Can we filter the IDOCs from which the XML will be generated, so that we can select the IDOCs we want to generate the XML from?
Regards,

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC

Hello Experts,
In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wanted to try the custom field extension in the Sandbox. So as per OSS note 916093, we have extended E101_CRMXIF_CUSTOMER_H segments with custom fields and tried generating the interfaces in BDFG transaction. While generation with IDOC CRMXIF_ORDER_SAVE_M we got an error message "Incompatible change to complex data type
type E101CRMXIF_ISU_PRA1_X". So went about creating a custom IDOC ZZ_CRMXIF_ORDER_SAVE_M02 for message CRMXIF_ORDER_SAVE. Even for this config, the IDOC is not getting generated for the BDOCs. Lastly, configured the IDOC ZZ_CRMXIF_ORDER_SAVE_M02 to a custom function module ZZ_BDFG_IDOC_TEST_FM. The FM got generated and activated, even then the IDOC is not generated for the BDOC.
SMOEAC config in Sandbox looks the same as the Development system. We do not the reason why IDOC is not getting generated and also the reason for error in BDFG while generating the interfaces after adding custom fields to CUSTOMER_H segment.
Any help would be appreciated.
Thanks,
Partha

Hi Partha,
Kindly check the following thread.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f?QuickLink=index&overridelayout=true
XIF adapter
Hope it answers your Query
Regards,
Srikanth.Naga

Two idocs of same type for each line item

I am new to SAP PI and seeking your help in the following scenario
legacy -> SAP PI -> branched to two idocs in ECC
The scenario is that a fixed length flat file coming from Legacy wil contain some line items but each line will be a separate invoice ..the twist . since it is a financial posting each invoice(line) has to be posted twice in the same IDOC but different logics which implies that for each line in the file there will be two IDOCS created in ECC of the same type, where one would be the AR posting and the other would be the AP posting
How can i make this happen without BPM ??
I have referred to a blog 1 : n possible in PI without BPM but here it is a combination of 1:n and also splitting of the line and posting it to two IDOCS simultaneously
since the transformation logics are different will I have to create two mappings but how and where to use them ??
Can I please have someone help me with the steps in ESR ad ID
Kindly help
Thanks
Rohan

Thanks Prateek i have done that but
" Map the occurrence of line items to the node Idoc at the target structue and then multiple idocs will be created "
is what iam unable to do
In the mapping i have to create two idocs per line item and this is creating just one
my source structure is like this
MT_abc     1.1
Invoices     1..unbounded
field 1
field 2 etc
and the target is
ACC_DOCUMENT02 1..1
IDOC                     1.unbounded
and i have mapped invoices to IDOC
now for testing in the test tab of mapping
how do i test if i will have two IDOC if i get one line item ??
Edited by: RohanS on Jun 18, 2009 2:06 PM
Edited by: RohanS on Jun 18, 2009 2:08 PM

Excess schedule is getting generated in Mrp.

Hi Gurus,
Excess schedule is getting generated although enough stock is available to cover the requirement why the requirement are getting generated
Mrp 2 lot size is weekly lot size
Minimum lot size 10
Covrage profile of 20
what is the effect of coverage profile 20 can any body tell me.
Quick response will be helpful
Thanks & Regards
Sandeep Praharaj

Dear Sandeep,
Coverage profile is used for dynamic safety stock. As safety stock can be define manualy in master data. But by assigning coverage profile system automatically generate requirement of safety stock on the basis of no. of days, no of period and target days. System calculate safety stock by given below formula.
Dynamic Safety Stock= Average Daily Requirement * Range Of Coverage
Average Daily Requirement =
(Requirements in the specified periods) / (Number of periods * No. of days per period)
Regards
Muhammad Umar

Two IDOC's are getting generated...!!!

Similar Messages

Maybe you are looking for