Two idocs with exactly the same data have statuses 51 an 53. Why?

Hi all,
There are two idcos with exactly the same data, however when they are processed, one is ok with status 53 whereas the other is not processed and has the status 51.
When I say same data, I mean both the idocs have the same message type, basic type, extension, partner no, partner type etc. Also, the data at the segment level is also the same.
Could you please let me know the reason for this?
Thanks and regards,
Anishur

Hi Azam
Me too faced the same for the Inbound Invoic Idoc Application . alternatively I used to get the error . Once 53 next 51 ... like that .It was the data issue in segment field E1EDS01-SUMME Total value of sum segment.It was resolved after ging the proper value .
Rgds
Sree M.
Edited by: Sree Merugu on Jul 2, 2008 6:14 PM

Similar Messages

HT2905 i want to delete dublicates with exactly the same time, advice?

i want to delete dublicates which show exactly the same time, any advice?
anybody any idea how to fix this?
i have 1600+ duplicates with exactly the same problem so deleting each number will take me ages.
any free program or function in itunes you can use?

Hold down ths shift key then highlight the first of the group and then the last of the group.
If the files are not in order hold down the command key and then select them one at a time in any order.

Problem importing two service interfaces using the same data types

Hi,
I've been playing around with BPM for a while. Now I wanted to add a custom service interface to my starting event. I created the interface in ESR of CE 7.11. After importing I get this error message and I can't use the interface:
Cannot change XsdSimpleTypeDefinition AcademicTitleCodeContent by importing the document http://sap.com/xi/APPL/SE/Global::src/wsdl/TestInterface.wsdl, because it is already defined in the document http://sap.com/xi/APPL/SE/Global::src/wsdl/rootwsdl_CustomerERPByIDQueryResponse_InService.wsdl in this project. Importing into another project might be possible.
Of course the problem is clear, but how can I achieve importing two service interfaces that use the same data type without changing the xsd source?
Thanks in advance,
Mane

Sorry for the late answer, but I am really busy at the moment.
Unfortunately I can't the Interface and data types are already changed.
But this happened various times. Each time I already had imported a SAP Enterprise Service into NW BPM that contains a bunch of inline data types. While creating my own interface I referenced one of those data types that are stored in a SAP namespace. After import the error message appeared.
In the wsdl of the created interface there is a import statement for the namespace where the referenced data types origin from. Additionally there is a namespace definition xmlns:p1="SAPnamespace". In the element the type is "p1:ReferencedType". Could this maybe cause the error, because one time it is with this leading p1 in my created wsdl and once without in the SAP Service wsdl?
Thanks and I am looking forward to next EhP of NW BPM,
Mane

2 files with exact the same PMS color look different

I was working on a print project for my company and all files are created in Illustrator CC. Here is the confusing part, in this logo color file I found from the company inside files, the PMS color code actually matches the CMYK color code, and they look exactly the same on screen:
But on all the files I'm working on, the PMS color looks washed, when using the convert button to convert PMS to CMYK, the code looks different too:
Is there a file color setting I need to change? Besides illustrator, the PMS color in Photoshop cc and InDesign cc all look wash out.

The Color Mode of the swatch only impacts how the the color appears on your monitor. The important thing is that the Color Type always be "Spot Color" regardless of the Color Mode when you're dealing with files for print. If it's set to Spot Color, then exporting the file to film will have a single color pass. If it's set to Process Color you'll get 1-4 color passes when exporting depending on your CMYK values.
For the company's branding guide, you have both color options depending on how the logo will be printed. If you had something that included a photo, then you would want to use the CMYK version of the logo because you're already going to have CMYK values from the photo. Using an additional spot color just for the logo then makes it a 5-color job, thus increasing the cost. If you were printing something that only used black for text and also included the logo, then you would use the PMS version as this makes it a 2-color print job.
In some circumstances you don't have an option of a CMYK break of a PMS color, such as metallics and fluorescents. Some companies only print their logo in a spot color despite having it as part of a 4-color print just due to how a CMYK version of their logo appears. Not every PMS color has a 100% accurate CMYK break. Most frequently the CMYK version is dull compared to the PMS color simply because the gamut for CMYK is not as diverse as the full range of PMS colors are.

Single Album splitting in 3 or 4 folders with exactly the same na

Hi,
I have a Zen Micra (5Gigs, firmwire .02.05)
I would like to know if there is a way to fix a problem. When I rip an album with the correct tag and everything, my player split an album to put it in a different folders with the same artist name and same album name. Everything is ok otherwise, it's just cause sometime I have track of the album seperated from the others... What is Strange is that I doublechecked the infos and I made a "group" rename to make sure that the album and artist names are all the same for each of the album tracks.
Thanks for you help
SquareP

Compilation discs don't carry the same artist name, if you haven't noticed yet. Sort by 'Album' to have the songs listed in the correct order for that album.

Two life events on the same date

Can you please advise how to handle two life events on a single date.

Dharmesh
If you have two life events on one date then you have to void the one manually and process the other. Also you can define collapsing life events and setup which life events will take precedence.
You can use following document to setup collapsing life events
Oracle HRMS Compensation and Benefits Management Guide (US)
[http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120hrcbusug.pdf]

Form populates fields with all the same data

I am trying to fill out a form, but when you enter anything in one field, every other field gets populated with the same information. This happens for all fields. For example, if I type "Joe" for the Name field, and move to the next field, "Joe" will show up in every remaining field, i.e. address, city, state, etc. Changing another field will change every other field again to the same string.
I'm running Reader 8 in Vista. I've also tried Reader version 9 and the full version of Acrobat 9 with the same results. I'm guessing it's a function of the original form. Is there a way I can change this behavior myself?
Thanks,
Ryan

In Adobe Acrobat you can change the names of the fields. Assign diiferent names to the fields.

Do two wifi networks in the same home have to conflict with each other?

I have an Xfinity1 system that requires its own combo modem/router supplied by Xfinity in order to run its system. The premise here is that you can play live tv from any of your devices like computers, iPads and iPhones using their wifi system, and it works well.
I was advised by Apple that my two Airport Expresses, which provided my network before I brought in the Xfinity system, should be reconfigured to "join" my Xfinity network instead of maintaining their own separate network. So I reconfigured everything at their direction, and now my Airports won't stream music or anything else. I called Apple, we checked out my configuration and found out my Airports were set up and working correctly.
Now I have been advised by a senior Apple tech to go back to my original setup with the Xfinity network and a separate Airport Express network. This was late last night, and I was just too tired to do it at that point. So, today I have a phone appointment with that senior Apple tech to change everything back to my original setup.
I would like some input from the community about this situation. Maybe there is more to this than meets the eye. Like why are these Airports currently not streaming music from any of my devices? The Airport icon shows up when I try to stream music, but when I choose one of the two Expresses nothing happens.
The Xfinity system does not stream Apple stuff. Could the problem be that, by joining the Xfinity network, the Airports cannot stream music from iTunes or iPads or iPhones because the Xfinity system cannot accommodate Apple content under any circumstances. In other words, do you just have to have an Apple network to stream Apple content?
HELP.

By default, the WLC code does not try to contain rogue AP's. Just lots of alarm's and unclassified rogue's.
In this case you hosts may have actually enabled containment but would have also received a screen full of warning about the public nature of the unlicensed wifi band.
Here the Superior Court system is side by side with the County system even to the extent that the AP's are next to each other. Gets fun. Since each SSID constitutes a rogue, each unit represents a LOT of rogues to report.
Good Luck

Two objects created at the same time with the same hashcode

We have this object with the following constructor:
2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(3)(pid:24312)] INFO com.intel.swiss.sws.netstar.application.caching.framework.data
set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
/d81], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0
2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(5)(pid:24315)] INFO com.intel.swiss.sws.netstar.application.caching.framework.data
set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
/d31], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0Note that two objects are created by different threads with exactly the same hash code. Any idea if/how this is possible?

isocdev_mb wrote:
The last part definitely suggests already that relying on uniqueness is incorrect. Hash codes are very often equal on distinct objects, viz. new String("java").hashCode == new String("java").hashCode(). Use a class level counter as suggested earlier.For that case we would of course expect the hashCodes to be equal, since the objects are equal. But even in the case of non-equal objects that don't override hashCode, you can still get the same value. Or, for that matter, non-equal objects that do override it. There are 2^32 possible hashCode values. There are 2^64 possible Long values. That means that there are 2^32 Longs that have a hashCode of 1, 2^32 Longs that have a hashCode of 2, etc.
And for non-equal objects...
package scratch;
import java.util.Set;
import java.util.Map;
import java.util.HashMap;
public class HashCodeIsNotUnique {
public static void main(String[] args) throws Exception {
    Map<Integer, Integer> hashCodeCounts = new HashMap<Integer, Integer>();
    int numObjects = 10000;
    for (int i = 0; i < numObjects; i++) {
      Object obj = new Object();
      int hashCode = obj.hashCode();
      if (!hashCodeCounts.containsKey(hashCode)) {
        hashCodeCounts.put(hashCode, 0);
      hashCodeCounts.put(hashCode, hashCodeCounts.get(hashCode) + 1);
    for (Map.Entry<Integer, Integer> entry : hashCodeCounts.entrySet()) {
      int key = entry.getKey();
      int value = entry.getValue();
      if (value > 1) {
        System.out.println(key + " occurred " + value + " times");
9578500 occurred 2 times
14850080 occurred 2 times

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

How to upload data from flat to ztables with in the same client by idocs

Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.Varma

Hi,
This is the procedure.
create segments using we31. <b>don't forget to relaese it</b>
create idoc using above segments using we30 <b>don't forget to relaese it</b>
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

Can we with ligthroom have the sofware set up on multiples computer mac and mc and share the same dat base library?

can we with ligthroom have the sofware set up on multiples computer mac and mc and share the same dat base library?

No, a Lightroom catalog cannot be on a networked drive, and can only be accessed by a single user at a time.

I currently have one input but need to run two loops. I cannot get the two while loops to run so that they both pick up the same data, they are both picking up alternate samples. How can I get them to both pick up all of the values?

The system I am trying to create calculates a number of values based on an input. I need to make the calculations and display the values for an entire production run and for each hour. The only way I know to do this is to create two while loops, one looking at all the values that are received and one looking only at the values for hour long periods.
Any help would be great.
Thanks
RossH

Why do you think that you have to have two loops to accomplish this task? Why not use one loop and accumulate the same data into two data sets based on the two sets of criteria?

I have lost my blue applications folder from dock the one with the A on how do i get it back exactly the same as it was

I have an Imac with snow leopard 10.6.8 and have lost the blue applications folder with an A from my dock please how do i get this bck in exactly the same format?

To make the icon look like this:
Right click and select this option.

Two idocs with exactly the same data have statuses 51 an 53. Why?

Similar Messages

Maybe you are looking for