Two independent clusters on the same network

Hi,
How do I configure Coherence node VMs to participate in different coherence clusters on the same network?
Thank you.
Roman

Hi Roman,
You need only have each cluster running on a different multicast address. You can accomplish this by either modifying the <multicast-listener> <address> element in the tangosol-coherence.xml file. Or you can override this value by using the following java command line argument -Dtangosol.coherence.clusteraddress=<IP_ADDRESS>
Later,
Rob Misek
Tangosol, Inc.
Coherence: Cluster your Work. Work your Cluster.

Similar Messages

  • Multiple production clusters on the same network? just change UDP port?

    If I want multiple production clusters on the same network do I just make sure each cluster is on it's own multicast port? or are other changes required?
    Thanks,
    Andrew

    Hi Andrew,
    I think to be safe it would be best to use a different address and port.
    -Dave

  • Can I have two time capsules on the same network

    Is it possible to have two TC on the same network, I have a 500Gb 1st Gen TC which I have replaced with a 2TB 4th Gen TC but still want to use the 500Gb. Is this possible and how do you set up?
    Thanks

    How do you want to use the old one? Is it simply for storing random files? I assume random files right that you wish to access/store/delete/share? If thats the case, just plug it in without connecting to anything.
    You simply would connect to it this way - "Finder/Go/Connect to Server/10.0.1.1
    You'll need to click the "+" sign after you enter that addy. Or better yet, go into the airport utilty for that device and assign it a special ip addy. That will make it easy to identify. Then follow those same steps. Viola, you will see the device in your finder and access it just like a portable drive but on a network instead.

  • Can you setup handoff to work with two mac computers on the same network?

    I am attempting to setup handoff to work with two computers on the same network. I cannot seem to get it to work. Should I be able to?

    I'm not sure but I haven't seen anything on the Apple site that indicates that it would not work. The following troubleshooting documents may help: Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
    Note in particular the Mac models supported. The other thing that occurs to me is that in addition to being on the same network they would have to be within Bluetooth range of each other.

  • Two ipod minis on the same network

    I am trying to sync my ipod mini but it keeps taking me to my brother's library and online setup. We are on the same network. How do I get back to mine?

    No. It seems like when I upgraded to the new iPod software it erased my library. He took off sharing so I don't go to his library anymore, but now all my songs are gone. I am on a PC...

  • How to create two independent index in the same RH project?

    Hello everyone
    I used Rh html 9.
    I created a new index in my project to have two independent and different index, but the two index are connected. When I deleted one word in the new index, the same word is deleted in the first index.
    When I've created the second index, I didn't choose the option "from an existing index", because I wanted a new and empty index but RH created a copy of the existing index and linked with the existing index.
    It is possible toc reate a lot of different table of content and glossary but not different index ?
    If someone can explain me why it doesn't work for index.
    Thank you.
    Florence

    Hi there
    If you click File > Project Settings > General tab, is the index set to have keywords in Topics or the Index file (HHK)?
    If it's set for Index file (HHK) that would likely explain it because the keywords are stored directly inside the topics themselves.
    If the setting is already for Index file (HHK) I'm a bit stumped and can only fathom that maybe you have stumbled across a bit of a RoboHelp bug. I've not tried using multiple indexes before. Perhaps I should try and see.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Can I have two Time Capsules in the same network, use one as Time Machine and other to expand network?

    I need to purchase a divice to expand my Wi-fi network. I was looking at the AirPort Extreme, but a friend has a brand new Time Capsule for sale. So, for the same price of the AirPort Extreme, I´m getting the Time Capsule.
    I already own one and using it as Time Machine and wireless router. If I decide to purchase another TC would it have any conflict with the one that I already have?
    Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?

    If I decide to purchase another TC would it have any conflict with the one that I already have?
    No
    Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?
    Yes. The important thing to remember is that the "extending" Time Capsule must be located where it can receive a strong wireless signal from your "main" Time Capsule.

  • Is possibile to connect two time capsule at the same network?

    I'd like to use one for backup with Time Machine and one as Network Hard Drive.
    Thanks in advance.

    I'd like to use one for backup with Time Machine and one as Network Hard Drive.
    No problem.
    Post back if you need some tips on the configuration of both devices.

  • Two WD Nas on The Same Network?

    I have the WD Duo 6TB which is now full and I'm looking at Purchasing the EX4100.with just 2 Hard Drives and then adding another 2 when cost and need arises.  Could I put both Nas on my Home Network, so my Mede8er Media Player will play files from both Nas.  Thanks In Advance For Any Help.  

    Yes. I know with my MBLD that runs Townky 8 that Twonky on one NAS can manage and play the files on another NAS.

  • How can I connect two macs in the same network?

    Both are connected to the same network. One via ethernet and the other via Wifi (Airport Extreme). Both share the same Internet conection. I have followed instructions for files sharing. I can access only the computer linked to my home network via ethernet, but not the other way. It does not found the server address provided in file sharing by the computer conected via Wifi. Any clue? Can it be that the IP address of the Wifi conected is DCHP?

    Are you using Connect to Server or Shared sidebar in the Finder? What OS X versions do the two machines run?

  • Use two interfaces on the same network

    Hello every one,
    I actually starting to work on a cisco project. I'm a beginner on networking and cisco technologie.
    For my project we use a router 2921.
    We got two network:
    - Network A: 192.198.0.X / 255.255.255.0 / Gateway 192.198.0.1
    - Network B: 162.168.0.X / 255.255.0.0 / Gateway 162.168.0.1
    Each network use switch, Switch A (connecting to network A) is connected to interface G0/0.
    And Switch B (connecting to network B) is connected to interface G0/1.
    Router well configured as:
    - G0/0: ip address 192.198.0.1 255.255.255.0 (network A)
    - G0/1: ip address 162.168.0.1 255.255.0.0 (network B)
    Every think working fine.
    The problem is with this one, we need to connect a computer on G0/2. This computer is configure as network A (192.198.0.10 / 255.255.255.0 and same gateway).
    I can't configure G0/2 as 192.198.0.1 255.255.255.0 (network A), cause G0/0 use this adresse.
    I can't put this computer on the switch A, my only physical possibilité is to connect him on G0/2.
    We just need to use interface G0/0 and G0/2 as a switch on the router with the same gateway (192.198.0.1)
    How can i connect this computeur? How can i configure two interfaces on the same network and same gateway?
    Thanks you

    I would just put the PC on a different network, but if you really want it to be in the same network, you could use IRB to connect two of the interfaces on the router at layer 2.
    Here is an example config for IRB:
    interface FastEthernet0/0
    bridge-group 1
    interface FastEthernet0/1
    bridge-group 1
    bridge irb
    interface BVI1
    ip address 192.168.0.1 255.255.255.0
    bridge 1 route ip
    Notice that the physical ports do not have IP addresses on them, the IP for the subnet is on the BVI interface.

  • I have two iMac's on the same desk. Once iMac pairs with both keyboards and mice.  The other pairs with the mouse, but I cannot get the keyboard to connect.  How do I get a keyboard and mouse to connect to each iMac independently?

    I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice.  The other pairs with the mouse only; I cannot get the keyboard to connect.  How do I get a keyboard and mouse to connect to each iMac independently?

    Antaeus00 wrote:
    I tried sending a request for help,
    But did you succeeed in sending a request for help?
    Did you receive a response? How long has it been since you sent a request?
    but I need someone with more authority to talk to.
    There is no one with more authority than iTunes store support. We herem are only users.

  • Sharing two computers on the same network

    I have a mac mini and a mac air and wish to synch/share the entire Itunes with each other.  I have turned on home sharing but do not see the devices listed with each other.  They are both on the same network and can be seen by apple tv.

    The only way I know to share iTunes Libraries is to do what you said you did. Turn on Home Sharing for both devices. You will only see the device's Library (under Shared) in the Sidebar of iTunes. You won't see the actual device.
    For example I have an rMBP and a Mac Mini. Both have Home Sharing turned on in iTunes. From the Mac Mini, I see the rMBP's iTunes Library. From the rMBP, I see the Mac Mini's iTunes Library.

  • Communication between Two WebLogic instances on the same machine

    Hi,
    We're having a problem with communication between two copies of Weblogic on
    the same machine. They are configured with seperate ports (regular and SSL).
    Independantly, they run fine. I can access EJBs running on either of them.
    The problem is that a bean in one of them has code which attempts to access
    an EJB on the other one. The procude fails when trying to obtain the initial
    context. This same code works if compilied independantly of WebLogic on the
    same machine.
    Are there any known issues regards communication between two running
    instances of Weblogic on the same machine?
    Thanks in advance,
    Randy Yarger
    marchFIRST
    [email protected]

    Thanks for the prompt reply.
    There is one IP address (internal address 10.227.1.34) one the machine. WLS1
    is set up at ports 7001 and 5133. WLS2 is setup at ports 7004 and 7005.
    When WLS1 attempts to obtain a context to WLS2 with the URL
    t3://10.227.1.34:7004/ it pauses for a long period of time. Running truss
    on the both WLS processes shows communication occuring between the two
    followed by long periods of silence. Finally WLS2 spits out the error
    ConnectionException[7001,7001,5133,5133,7001,7001] (paraphrased, I can get
    the entire error if it would help).
    After another long pause, WLS1 quits trying with the error 'Server
    10.227.1.34:7004 not found' (again paraphrased).
    Among the things we've tried:
    * Changing the URL from the IP to 127.0.0.1
    * Enabling/disabling SSL on either or both WLSs.
    * Changing the server name in WLS2's copy of weblogic.properties from
    'myserver' to 'myserver2' (previously they were both 'myserver')
    * Upgrading WLS2 to 5.1.0sp5 (Tried upgrading WLS1, but was getting class
    not found errors and quit because that WLS is being used by other people)
    This is a Solaris server. WLS1 is running 5.1.0 and WLS2 is running 5.1.0sp5
    Any suggestions would be appreciated.
    Best,
    Randy Yarger
    marchFIRST
    [email protected]
    "Michael Girdley" <[email protected]> wrote in message
    news:[email protected]...
    >
    >
    There should not be. What is your network configuration? Are they on
    separate IP addresses?
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Randy Jay Yarger" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    We're having a problem with communication between two copies of Weblogicon
    the same machine. They are configured with seperate ports (regular andSSL).
    Independantly, they run fine. I can access EJBs running on either of
    them.
    The problem is that a bean in one of them has code which attempts toaccess
    an EJB on the other one. The procude fails when trying to obtain theinitial
    context. This same code works if compilied independantly of WebLogic onthe
    same machine.
    Are there any known issues regards communication between two running
    instances of Weblogic on the same machine?
    Thanks in advance,
    Randy Yarger
    marchFIRST
    [email protected]

  • Log4j in multiple clusters in the same machine

    Hi,
    i use log4j and i'm having some problems with my log files. I have two clusters in the same machine. How can i have the logs independent of each other. Now i have one cluster jamming the log of the other cluster. I want this doesn't happen, i want they log separately. How can i do it?
    Many thanks in advance,
    Nuno

    nfalmeida wrote:
    Hi,
    i use log4j and i'm having some problems with my log files. I have two clusters in the same machine. How can i have the logs independent of each other. Now i have one cluster jamming the log of the other cluster. I want this doesn't happen, i want they log separately. How can i do it?
    I hope you have configuration files that configure log4j? The applications/clusters shouldn't use the same configuration.

Maybe you are looking for