Two Infrastructures on same server?
Is it possible to install two separate infrastructures on the same server? I have one very sick infrastructure install with possible oid corruption -support techs have been working it for a month now and I need to move on. I want to install a second infra and mid, and try to export/import so I will not loose any data. Do I need to remove the 'bad' install first? I tried installing in a different oracle home, but I got some messages about the libraries. I had cleared all environment vars prior to starting - but reset the oracle home to the new directory where I wanted to do the second install.
So, does anyone know if you can install two infra's on the same server? This is on Solaris.
Thanks in advance,
Debbie
Hi,
Some time back i came accross a note on Metalink which says it is not possible to have multiple installations of infrastructue on the same server, So please clean the prior installation and move ahead.
Thanks
Deepak
Similar Messages
-
I was wondering if it's possible to have a STVN 2.1 OrgChart and STVN 2.0 Succession Planning installed on the same server? Has anyone seen this kind of setup before?
Hi Luke:
While I've not seen this done, I'd previously asked the vendor this question and was told the answer is yes. It makes sense, since the two applications really don't share any files and the transport package that comes with 2.1 doesn't 'remove' any functionality from SAP.
Good luck.
Thanks,
Chris
Edited by: Chris McNarney on May 28, 2010 10:16 PM -
Two POAs on same server?
I need to segment some users away from our main POA. Can I run two post
office agents on the same server?
SLES11/OES11, GroupWise 2012
One server is currently running 1 each of MTA, POA, GWIA and WEBACC. We
have about 130 email accounts total. We want to add about 50 users to a
separate POA to differentiate them in the System.
Thank you,
AngieAngie Veach wrote:
> I need to segment some users away from our main POA. Can I run two
> post office agents on the same server?
Yes. You either run them each on a separate port both on the same
existing IP address of the server, or you bind a second IP address to
the server and in the properties of the POA specify the correct IP
address for each POA. You then can leave them both at the default port
of 1677 (7191 for SOAP).
We're your Novell--again. http://www.novell.com/promo/backtobasics.html
Enhancement Requests: http://www.novell.com/rms -
Hello.
We use the such landspace:
2 GRC NW portals (7.0 EHP1) which are connected to 2 BOBJ portals (3.1 XI SP3 FixPack 3.3) on the same server.
First GRC portal with BOBJ (name BOE) is for development purposes. There are the DEV systems.
Second GRC portal with BOBJ (name BOP) is for productive purposes. There are the PROD systems.
I use the separate port numbers for BOP.
Working schema is: GRC portal takes and use Crystal reports from BOBJ. CR reports on BOBJ was published before from GRC.
No problem in DEV systems. GRC works correctly and successfully opens CR reports from BOE.
But in PROD system we have this problem: GRC couldn't opens CR reports from BOP.
Error message was occured:
Error in RAS Connction.
com.crystaldecisions.sdk.exception.SDKException$SecurityError: Unknown entitlement system: PRMCLNT200. Logon cannot proceed.
at com.crystaldecisions.sdk.plugin.authentication.sap.internal.SAPR3Error.ThrowException(Unknown Source)
at com.crystaldecisions.sdk.plugin.authentication.sap.internal.SAPR3Authentication.startLogin(Unknown Source)
at com.crystaldecisions.sdk.occa.security.internal.LogonService.doLogon(LogonService.java:337)
All settings in PROD systems is correctly and similar such as DEV.
SAP Authentication in BOP works correctly (Roles imported from ABAP GRC part).
I think problem occured because we use 2 BOBJ servers (BOE XI 3.1 SP3 FixPack 3.3) on same server. And we have some limitations therefore.
If I'm right, I have the questions.
Is there are some limitations during simultaneous work of two BOBJ systems on the same server?
regards,
Yessen SypatayevHi Yessen,
This error message could occur if you removed any entitlement from your Prod server without removing the Roles associated with it. Let me know if that is the case.
Regards,
Nakul Mehta -
On new MacPro with Microsoft Office. Two email accounts, same service provider and server, yet one email account is fine and the other dumped the entire server of 35,000 emails into inbox. Need to keep server load for business, but how can emulating server on one account be fixed?
You should clean up your inbox on the server. Log into the account's web interface and move the 35,000 emails out of the inbox into another folder. Why do you need to keep 35,000 emails in the inbox? An email client like OutLook etc. using POP protocol downloads all the inbox emails to your computer.
-
Hi All,
My requirement is:
We have ESS BP imported in SC.
I want to enhance the functionality
of the DC available in the ESS SC
without changing the behavior of the
original DC and both DCu2019s should be
executed at the same server.
As I want to run both DCs at the same
server the DC names have to be different.
So how do I achieve this?
Will be thanks full for your quick reply'su2026u2026u2026..
PS: I think there is tool for this but not
sure and able to get any info about it.
Have look at refactoring, but I assume
it can only copy the DC not rename the DC.
Awaiting for replyu2019s...
Cheers,
SJThis is not possible, have changed the standard DC. During upgrade will have to follow the NWDI cookbook.
-
ACE L4 LB to two ports on same server?
How can I get the ACE to layer4 loadbalance to two services listening on different ports on the same real server?
You just need to define same real with different ports under the same serverfarm
rserver host Host1
ip address 10.10.10.1
inservice
serverfarm Sf1
rserver Host1 8080
inservice
rserver Host1 8081
inservive
Syed -
Multiple JVMs on same server.
I have two JVMs on same server. Both JVMs are has been associated with different and independent applications. There were some errors reported by one JVMs. My question is
Is error reported from one JVMs could affect the another JVM/Application? If yes then what types of effect will be reported by other JVM or Application?
Thanks, ManojRecent Java versions employ "Class Data Sharing", which under some circumstances might propagate file corruption from one to the other. See
http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html -
How to create multiple instances of jboss on same server ?
Hi Friends,
I want to create two servers ( two instances of same server ) running on defferent ports , except default server in jboss.
I do not have any idea, will you please help me?
My server is jboss-4.0.0
e.g. "web" or "business" servers in
/jboss/server/web and
/jboss/server/businessHi Kcounsell,
Thank for your suggestion.
I have put bindingservice-plugin.jar in each server's lib directory.
But still i am getting the exception, because it is not getting the path of "bindings.xml" . I have given the hard coded path here.
Please look into the exception bellow.
How should i mention the path?
OR any other mistake is there?
Regards,
Prashant.
C:\jboss-4.0.0\bin>run -c business
===============================================================================
JBoss Bootstrap Environment
JBOSS_HOME: C:\jboss-4.0.0\bin\\..
JAVA: C:\j2sdk1.4.2_06\bin\java
JAVA_OPTS: -Dprogram.name=run.bat -Xms128m -Xmx512m
CLASSPATH: C:\j2sdk1.4.2_06\lib\tools.jar;C:\jboss-4.0.0\bin\\run.jar
===============================================================================
12:18:20,730 INFO [Server] Starting JBoss (MX MicroKernel)...
12:18:20,730 INFO [Server] Release ID: JBoss [Zion] 4.0.0 (build: CVSTag=JBoss_4_0_0 date=200409200418)
12:18:20,746 INFO [Server] Home Dir: C:\jboss-4.0.0
12:18:20,746 INFO [Server] Home URL: file:/C:/jboss-4.0.0/
12:18:20,746 INFO [Server] Library URL: file:/C:/jboss-4.0.0/lib/
12:18:20,762 INFO [Server] Patch URL: null
12:18:20,762 INFO [Server] Server Name: business
12:18:20,762 INFO [Server] Server Home Dir: C:\jboss-4.0.0\server\business
12:18:20,762 INFO [Server] Server Home URL: file:/C:/jboss-4.0.0/server/business/
12:18:20,777 INFO [Server] Server Data Dir: C:\jboss-4.0.0\server\business\data
12:18:20,777 INFO [Server] Server Temp Dir: C:\jboss-4.0.0\server\business\tmp
12:18:20,777 INFO [Server] Server Config URL: file:/C:/jboss-4.0.0/server/business/conf/
12:18:20,793 INFO [Server] Server Library URL: file:/C:/jboss-4.0.0/server/business/lib/
12:18:20,793 INFO [Server] Root Deployment Filename: jboss-service.xml
12:18:20,793 INFO [Server] Starting General Purpose Architecture (GPA)...
12:18:21,200 INFO [ServerInfo] Java version: 1.4.2_06,Sun Microsystems Inc.
12:18:21,200 INFO [ServerInfo] Java VM: Java HotSpot(TM) Client VM 1.4.2_06-b03,Sun Microsystems Inc.
12:18:21,200 INFO [ServerInfo] OS-System: Windows XP 5.1,x86
12:18:21,607 INFO [Server] Core system initialized
12:18:24,345 INFO [ServiceBindingManager] Initializing store
12:18:24,345 INFO [ServiceBindingManager] Using StoreURL: file:/C:/binding/bindings.xml
12:18:24,361 WARN [ServiceConfigurator] Failed to apply service binding override
java.io.FileNotFoundException: C:\binding\bindings.xml
at org.jboss.net.protocol.file.FileURLConnection.connect(FileURLConnection.java:71)
at org.jboss.net.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:80)
at java.net.URL.openStream(URL.java:913)
at org.jboss.services.binding.XMLServicesStore.load(XMLServicesStore.java:99)
at org.jboss.services.binding.ServiceBindingManager.initStore(ServiceBindingManager.java:197)
at org.jboss.services.binding.ServiceBindingManager.applyServiceConfig(ServiceBindingManager.java:160)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.system.ServiceConfigurator.configure(ServiceConfigurator.java:446)
at org.jboss.system.ServiceConfigurator.internalInstall(ServiceConfigurator.java:160)
at org.jboss.system.ServiceConfigurator.install(ServiceConfigurator.java:114)
at org.jboss.system.ServiceController.install(ServiceController.java:200)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy4.install(Unknown Source)
at org.jboss.deployment.SARDeployer.create(SARDeployer.java:208)
at org.jboss.deployment.MainDeployer.create(MainDeployer.java:889)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:745)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:709)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:693)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:119)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:131)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy5.deploy(Unknown Source)
at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:396)
at org.jboss.system.server.ServerImpl.start(ServerImpl.java:293)
at org.jboss.Main.boot(Main.java:151)
at org.jboss.Main$1.run(Main.java:405)
at java.lang.Thread.run(Thread.java:534)
12:18:25,127 INFO [Log4jService$URLWatchTimerTask] Configuring from URL: resource:log4j.xml
12:18:25,237 INFO [WebService] Using RMI server codebase: http://synpune0109:8083/
12:18:25,362 ERROR [NamingService] Starting failed jboss:service=Naming
java.rmi.server.ExportException: Port already in use: 1098; nested exception is:
java.net.BindException: Address already in use: JVM_Bind
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:243)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:178)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:382)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:116)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:145)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:129)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:275)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:206)
at org.jnp.server.Main.initJnpInvoker(Main.java:286)
at org.jnp.server.Main.start(Main.java:253)
at org.jboss.naming.NamingService.startService(NamingService.java:209)
at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:271)
at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:221)
at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
at $Proxy0.start(Unknown Source)
at org.jboss.system.ServiceController.start(ServiceController.java:416)
at org.jboss.system.ServiceController.start(ServiceController.java:438)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy4.start(Unknown Source)
at org.jboss.deployment.SARDeployer.start(SARDeployer.java:261)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:935)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:746)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:709)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:693)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:119)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:131)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy5.deploy(Unknown Source)
at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:396)
at org.jboss.system.server.ServerImpl.start(ServerImpl.java:293)
at org.jboss.Main.boot(Main.java:151)
at org.jboss.Main$1.run(Main.java:405)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.ServerSocket.bind(ServerSocket.java:318)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at org.jboss.net.sockets.DefaultSocketFactory.createServerSocket(DefaultSocketFactory.java:79)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:615)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:231)
... 59 more
12:18:25,659 WARN [ServiceController] Problem starting service jboss:service=Naming
java.rmi.server.ExportException: Port already in use: 1098; nested exception is:
java.net.BindException: Address already in use: JVM_Bind
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:243)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:178)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:382)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:116)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:145)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:129)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:275)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:206)
at org.jnp.server.Main.initJnpInvoker(Main.java:286)
at org.jnp.server.Main.start(Main.java:253)
at org.jboss.naming.NamingService.startService(NamingService.java:209)
at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:271)
at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:221)
at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
at $Proxy0.start(Unknown Source)
at org.jboss.system.ServiceController.start(ServiceController.java:416)
at org.jboss.system.ServiceController.start(ServiceController.java:438)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy4.start(Unknown Source)
at org.jboss.deployment.SARDeployer.start(SARDeployer.java:261)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:935)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:746)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:709)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:693)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:119)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:131)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy5.deploy(Unknown Source)
at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:396)
at org.jboss.system.server.ServerImpl.start(ServerImpl.java:293)
at org.jboss.Main.boot(Main.java:151)
at org.jboss.Main$1.run(Main.java:405)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.ServerSocket.bind(ServerSocket.java:318)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at org.jboss.net.sockets.DefaultSocketFactory.createServerSocket(DefaultSocketFactory.java:79)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:615)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:231)
... 59 more
12:18:25,972 ERROR [WebService] Starting failed jboss:service=WebService
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.ServerSocket.bind(ServerSocket.java:318)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at org.jboss.web.WebServer.start(WebServer.java:169)
at org.jboss.web.WebService.startService(WebService.java:296)
at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:271)
at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:221)
at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
at $Proxy0.start(Unknown Source)
at org.jboss.system.ServiceController.start(ServiceController.java:416)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy4.start(Unknown Source)
at org.jboss.deployment.SARDeployer.start(SARDeployer.java:261)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:935)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:746)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:709)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:693)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:119)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:131)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy5.deploy(Unknown Source)
at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:396)
at org.jboss.system.server.ServerImpl.start(ServerImpl.java:293)
at org.jboss.Main.boot(Main.java:151)
at org.jboss.Main$1.run(Main.java:405)
at java.lang.Thread.run(Thread.java:534)
12:18:26,207 WARN [ServiceController] Problem starting service jboss:service=WebService
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.ServerSocket.bind(ServerSocket.java:318)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at org.jboss.web.WebServer.start(WebServer.java:169)
at org.jboss.web.WebService.startService(WebService.java:296)
at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:271)
at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:221)
at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
at $Proxy0.start(Unknown Source)
at org.jboss.system.ServiceController.start(ServiceController.java:416)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy4.start(Unknown Source)
at org.jboss.deployment.SARDeployer.start(SARDeployer.java:261)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:935)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:746)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:709)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:693)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:119)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:131)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy5.deploy(Unknown Source)
at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:396)
at org.jboss.system.server.ServerImpl.start(ServerImpl.java:293)
at org.jboss.Main.boot(Main.java:151)
at org.jboss.Main$1.run(Main.java:405)
at java.lang.Thread.run(Thread.java:534)
12:18:26,582 ERROR [JRMPInvoker] Starting failed jboss:service=invoker,type=jrmp
java.rmi.server.ExportException: Port already in use: 4444; nested exception is:
java.net.BindException: Address already in use: JVM_Bind
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:243)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:178)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:382)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:116)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:145)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:129)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:275)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:206)
at org.jboss.invocation.jrmp.server.JRMPInvoker.exportCI(JRMPInvoker.java:413)
at org.jboss.invocation.jrmp.server.JRMPInvoker.startService(JRMPInvoker.java:335)
at org.jboss.invocation.jrmp.server.JRMPInvoker$1.startService(JRMPInvoker.java:140)
at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:271)
at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:221)
at org.jboss.invocation.jrmp.server.JRMPInvoker.jbossInternalLifecycle(JRMPInvoker.java:601)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
at $Proxy0.start(Unknown Source)
at org.jboss.system.ServiceController.start(ServiceController.java:416)
at org.jboss.system.ServiceController.start(ServiceController.java:438)
at org.jboss.system.ServiceController.start(ServiceController.java:438)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:242)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:176)
at $Proxy4.start(Unknown Source)
at org.jboss.deployment.SARDeployer.start(SARDeployer.java:261)
at org.jboss.deployment.MainDeployer.start(MainDeployer.java:935)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:746)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:709)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:693)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAcce -
Install two 10gAS infrastructure databases in a same server
Can I install two 10AS infrastructure database in a same server? Each database will be used for different purposes.
Never tried that but I belive that you can.
It is the same as two classic databases on same machine. -
How can i deploy two different versions of the same application on the same server??
I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.
Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep -
How Can I create a cluster of two instances running on the same server?
Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco -
How do I install two instances on the same Server and avoid a conflict?
Hi,
I have one Server and I want to install two instances of SQL Server on it.
1. Will be a default instance.
2. Will be a named instance.
The Server has an IP address of 192.168.0.10 and the default instance will be using port 1433.
I want them to share the same address, but be listening on different ports.
Do I,
1. Go into TCP/IP of the named instance and set the port numbers for all the IP's to a port number, e.g. 1976?
2. Delete the 0 from the dynamic ports sections?
3. Create an open port rule in the Windows Firewall to allow access to the Server?
ThanksHi,
Please see following Microsoft link
Configure SQL Server to listen on Specific port
Configure Windows firewall to allow SQL Server access
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
CNR: Two cnr instances in the same server (lab environment)
Hello, we are trying to install two cnr 7.2 intances on the same server in order to replicate in lab the real environnment (failover local cluster) without deploying two servers.
I've seen on the installation guide that installing both a local and regional server on a single machine is supported, but what about two local servers working as a failover pair?
up to date, we've managed to install both installs, the dhcp servers are configured for using different interfaces and web gui are listening in different ports. scp ports have been changed (1234 and 4321 ) and, on dhcp-server expert configuration: failover-remote-port and failover-port are configured to be different (677 - 678 in one , and 678 - 677 in the other)
We can manage both servers from DHCP - failover configuration, as they show up and running, and even see logs... The other configs are
When trying to syncronize we get the error
"ChangeSet list is empty."
is this configuration supported?
best regards!user10127912 wrote:
Hi,
We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. If you have such experience, please give us some insight.
The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158
Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?If you want a second database instance, no additional installation is required - as long as you want to run the second instance at the same version as the the first. Just fire up dbca and create the second database. One installation of Oracle (one ORACLE_HOME) is capable of supporting many database instances, though the same may or may not be said of the hardware it is running on.
As already said, one listener is enough. One listener, running from one oracle home, using the default name of LISTENER, running on the defualt port of 1521, is quite capable of -- indeed, WAS DESIGNED TO, supporte multiple database instances of multiple versions running from multiple ORACLE_HOMEs.
One instance of dbcontrol/dbconsole will support only one database. If you do not use Grid Control (extra installation, extra license) you will need to use the emca utility or one of the options in the dbca utility to configure a seperate instance of dbcontrol for each database. Don't worry about the ports, the creation utility will take care of it and report what it does. -
Two Communication Server in the same Server ?
Hi All,
do you know which are the steps and recommendations to install TWO Communication Station in the same server (Windows 2003) ?
The first one is connect to CRM develop system, and the second one to the CRM Quality System.
Regards,
Davide
[email protected]Hello Davide,
Note 503340 is not valid for 5.0 and above but its major points are still true:
1. Only one default destination can be setup in the DCOM Connector
which is used by the mobile clients after the installation.
2. Only one default COM4ABAP instance can be setup on the
communication station. This COM4ABAP instance is started
automatically after reboot.
DCOM Connector is now .NET Connector and COM4ABAP is now NET4ABAP in 5.0 and higher.
Clearly, connecting to TWO (or more) CRM system has two parts:
a.) For Data Transfer with Conntrans. You can configure A SINGLE COMMSTATION INSTANCE to communicate with MULTIPLE destinations by just adding destinations in the QmtCnfg tool on the CommStation. You can then specify this Commstation and the destination value as you created in the QmtConfg tool on the client and data transfer will work.
b.) For changing passwords of Employees in Tx: SMOEAC. This uses the NET4ABAP service running on the CommStation which is called by the CRM Server. There can be ONLY ONE NET4ABAP service running on a CommStation and this connects to ONLY ONE CRM SYSTEM at a time. Hence it is not possible for one NET4ABAP service to serve multiple CRM systems.
If you need both a and b, it is not possible. If you need only a, it is possible and detailed above and also in the CommStation installation guide.
I also believe you have a message running with SAP Support on this same issue and you would have gotten the same details from them.
Best Regards,
Ankan
Maybe you are looking for
-
How to go through java ???
hi frds !!! i am beginer fof java . i want to learn core java , advance java ,and j2ee . i want to learn why should any one go for this technology ??? i dont know from where to start . please help me . send me some documentation pdf files on my mail
-
ASA5510 , how can i create natpolicy for two DSL connections
How can tell me how to configure our ASA to nat our to internetconnections, at the moment the first work fine, ISP1 NAT ASA5510 LAN ISP2 NAT Regards
-
Cannot import photos from iphone to iphoto after ios6 upgrade
I upgraded to IOS6 a few days ago. Now iphoto does not start up automatically when I attach my phone. When I open the app, my phone is not recognized and the "import photos" button is no where to be found. I've tried checking off photostream, unchec
-
I've already reedeemed my itune account and used it. Now, I've reset my iPad and I can't use my account because it says my account isn't used in itune store. What's the problem and how can I solve it? Please.
-
Why dont we need process code for outbound master idoc?
For inbound master idoc we need a process code (EX. matmas03-MATM) but for <b>outbound master idoc</b> why dont we need process code?can anybody clarify me on that. thanx in advance....