Two instances running in AquaLogic BPM Enterprise Server 6.0 Standalone

May i have two different instances running in AquaLogic BPM Enterprise Server 6.0 Standalone?
For example:
One instance should be the Homologation Enviroment, to make some tests.
And the second one should be the definitive Production Enviroment to publish the projects after passing from Homologation Enviroment.

Hi,
By "Homologation Environment" I'm guessing you might be referring to a QA or UAT environment.
If this is the case, you'd have a separate ALBPM Engine running processes in this environment and then use ANT tasks to then publish projects into the true Production environment.
Have them on separate ALBPM Engines is the best practice.
hth,
Dan

Similar Messages

Trying to install Aqualogic BPM Enterprise Server in a Weblogic domain.

Hi,
I'm trying to configure a AquaLogic BPM Enterprise Server on a currently working WebLogic domain. I have had a lot of problems due to that I needed to copy some AquaLogic/Fuego libraries to the domain lib folder (didn't find any doc about it) and so I could keep on going on with the installation. However, right now I'm completely stopped with an error ... I cannot find anything about it in the Bea forum and not even Google... Here you have it, I hope some of you guys can help me out!!
<16-abr-2008 10H00' CEST> <Info> <Deployer> <BEA-149060> <Module /albpmServices/albpmengine of application 01-eng-albpmengine successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
<16-abr-2008 10H00' CEST> <Info> <EJB> <BEA-010060> <The Message-Driven EJB: item-execution-albpmengine has connected/reconnected to the JMS destination: queue/ToDoQueue.>
searching for directory.xml in the /META-INF directory
Creating connector [__internal__:J2EE]
Creating connector [fuego:SQL]
Protocol [REMOTE_JDBC] not supported.
Detail:Check that the appropriate pluggin is present in your system or that the provider name is not misspelled.
fuego.directory.exception.ProtocolNotSupportedException: Protocol [REMOTE_JDBC] not supported.
Detail:Check that the appropriate pluggin is present in your system or that the provider name is not misspelled.
     at fuego.directory.exception.ProtocolNotSupportedException.create(ProtocolNotSupportedException.java:34)
     at fuego.directory.provider.Factory.getFactoryFor(Factory.java:173)
     at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:214)
     at fuego.directory.Directory.fillPassport(Directory.java:122)
     at fuego.ejbengine.Engine.initDirectorySession(Engine.java:297)
     at fuego.ejbengine.Engine.start(Engine.java:123)
...

Hi,
I'm trying to configure a AquaLogic BPM Enterprise Server on a currently working WebLogic domain. I have had a lot of problems due to that I needed to copy some AquaLogic/Fuego libraries to the domain lib folder (didn't find any doc about it) and so I could keep on going on with the installation. However, right now I'm completely stopped with an error ... I cannot find anything about it in the Bea forum and not even Google... Here you have it, I hope some of you guys can help me out!!
<16-abr-2008 10H00' CEST> <Info> <Deployer> <BEA-149060> <Module /albpmServices/albpmengine of application 01-eng-albpmengine successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
<16-abr-2008 10H00' CEST> <Info> <EJB> <BEA-010060> <The Message-Driven EJB: item-execution-albpmengine has connected/reconnected to the JMS destination: queue/ToDoQueue.>
searching for directory.xml in the /META-INF directory
Creating connector [__internal__:J2EE]
Creating connector [fuego:SQL]
Protocol [REMOTE_JDBC] not supported.
Detail:Check that the appropriate pluggin is present in your system or that the provider name is not misspelled.
fuego.directory.exception.ProtocolNotSupportedException: Protocol [REMOTE_JDBC] not supported.
Detail:Check that the appropriate pluggin is present in your system or that the provider name is not misspelled.
     at fuego.directory.exception.ProtocolNotSupportedException.create(ProtocolNotSupportedException.java:34)
     at fuego.directory.provider.Factory.getFactoryFor(Factory.java:173)
     at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:214)
     at fuego.directory.Directory.fillPassport(Directory.java:122)
     at fuego.ejbengine.Engine.initDirectorySession(Engine.java:297)
     at fuego.ejbengine.Engine.start(Engine.java:123)
...

How to install AquaLogic BPM Enterprise server in UBUNTU linux

Hello everyone,
I really dont know if it is here that I need to post this, but I cannot find any documentation about how I can install AquaLogic BPM Enterprise server in a machine with UBUNTU server. Can anyone help me with that?
Thanks
Mario Mesquita

Hi,
SAP B1 will not support linux OS. Please check below guide:
http://rels.co.il/wp-content/uploads/2013/02/System-and-Hardware-Requirements-Guide-for-SAP-Business-One-8-8-and-higher.…
Thanks & Regards,
Nagarajan

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

Trying to run the SOA/BPM managed server withOUT running the Admin server

(This is for demo/development purposes... Using 11.1.1.4 in Windows 7 with 4gb)
Because of memory constrains I am trying to run the BPM/workspaces application without needing the Admin to be running.
When they both run, I can use the credentials I create with the Admin server but the response time is prohibitive and all my memory is used...
It seems to run much faster when only the bpm managed server is running but then I cannot login ...
So my question is simply: Whats the easiest way to set it up so I can use credentials elsewhere without requiring the admin server to be running?
( I could connect to an OID instance I have outside this server or the seeded demo they refer to in other posts ... but do these also require the admin server to be running???)
aTdHvAaNnKcSe ! (thanks IN advance)
Claudio
Edited by: clichten on Aug 20, 2011 9:35 AM

I don't know if what you want is possible. Only did a suggestion that works fine for me. I'm running SOA Suite and BPM Suite 11.1.1.5 on WLS 10.3.5
Configure a new WLS domain and see if the BPM Dev template is available in your version.
I've tuned my startup script (setSOADomainEnv.cmd) as follows:
set JAVA_OPTIONS=%JAVA_OPTIONS%
set DEFAULT_MEM_ARGS=-Xms512m -Xmx1024m
set PORT_MEM_ARGS=-Xms1536m -Xmx1536m
if "%JAVA_VENDOR%" == "Oracle" goto OracleJVM
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m -XX:MaxPermSize=512m
set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=256m -XX:MaxPermSize=512m
Use visualvm that's available from your jdk/bin directory to monitor your jvm and optimize it accordingly
Regards,
Melvin

Log filtering in BPM Enterprise Server

Hi ,
How can we filter logs based on different processes viewed inside the Log Viewer in the Process Administrator of Enterprise Server connected via. Weblogic?
So I want to see logs of Process A separately and Process B separately in the Log Viewer..
How can I do that?

Out of the box, ALBPM/Oracle BPM only allows for one level of logging across all projects, activities, business objects, etc. per engine. The only way to see projects separately is to ensure that log messages are standardized and consistently applied throughout all the projects. Since that tends to be a relatively difficult thing to enforce across all development teams and resources, we have created an Extended Logging Framework that enforces standardized logging for processes, activities, screenflows, and objects. It also outputs the log messages in a standard Log4j format that can be viewed and filtered through external log viewers such as LogMx. This allows the log messages to be filtered at an extremely granular level. In addition, the log level for each type of log message can be modified independently and adjusted in real time without having to restart the engine. You can check out a screencast here .

Changing timeout in BPM Enterprise Server

Hi,
We want to increase the timeout of all automatic activities from 60 seconds to 300 seconds.. We tried doing this by going under:-
Engines-->Name of Engine --> Execution and under retry Interval we change from 60 to 300 seconds...
We then restart the engine but the change does not take place.. The transaction still times out within 60 seconds..
Do we need to recreate the Enginer EAR after doing this? Do we need to change certain timeout settings inside Weblogic Server since we are using WLS Enterprise Server?
Any advice wud be appreciated..

Yes,
Take a look at weblogic transactions. Spefic at JTA transaction timeout.
But please, before increase this XA timeout, take a look at every resource that is participating in the transaction if it's possible to extend the transaction time otherwise you will have an transaction member aborting all the transaction due to timeout. (database , jms, ...)
Regards,
Luiz

JNDI lookup fails in a thread created by J2EE application on WAS 8.0.0.4 running on Red Hat Enterprise Server 5.8(2.6.18-308.e15).

I am using Jackrabbit Repository (jcr's implementation) as backend in my Web Appl.Whose data persists on Oracle Database. To make connection with Oracle database jackrabbit provide provision of JNDI Lookup to read the data source defined in WAS (using WAS 8.0.0.4 as App Server).
I am able to perform JNDI Lookup everywhere in my application,But in a flow where i am creating a Thread using Java Concurrent Api and insidethread's call() method when I am trying for JNDI Look following exception occurs –
[8/20/13 10:57:35:163 IST] 000000dd System Out O ERROR 20-08 10:57:35,163 (DatabaseFileSystem.java:init:209) failed to initialize file system
javax.jcr.RepositoryException: JNDI name not found: java:comp/env/jdbc/ofsds
at org.apache.jackrabbit.core.util.db.ConnectionFactory.getJndiDataSource(ConnectionFactory.java:295)
at org.apache.jackrabbit.core.util.db.ConnectionFactory.createDataSource(ConnectionFactory.java:233)
at org.apache.jackrabbit.core.util.db.ConnectionFactory.getDataSource(ConnectionFactory.java:166)
at org.apache.jackrabbit.core.fs.db.DbFileSystem.getDataSource(DbFileSystem.java:226)
at org.apache.jackrabbit.core.fs.db.DatabaseFileSystem.init(DatabaseFileSystem.java:190)
at org.apache.jackrabbit.core.config.RepositoryConfigurationParser$6.getFileSystem(RepositoryConfigurationParser.java:1057)
at org.apache.jackrabbit.core.config.RepositoryConfig.getFileSystem(RepositoryConfig.java:911)
at org.apache.jackrabbit.core.RepositoryImpl.<init>(RepositoryImpl.java:285)
at org.apache.jackrabbit.core.RepositoryImpl.create(RepositoryImpl.java:605)
at org.apache.jackrabbit.core.TransientRepository$2.getRepository(TransientRepository.java:232)
at org.apache.jackrabbit.core.TransientRepository.startRepository(TransientRepository.java:280)
at org.apache.jackrabbit.core.TransientRepository.login(TransientRepository.java:376)
at com.mmpnc.icm.server.repository.RepositoryStartupService.newSession(RepositoryStartupService.java:408)
at com.mmpnc.icm.server.repository.RepositoryStartupService.newSession(RepositoryStartupService.java:355)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.intercept.RootInvocationContext.proceed(RootInvocationContext.java:31)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:56)
at org.jboss.seam.transaction.RollbackInterceptor.aroundInvoke(RollbackInterceptor.java:28)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.RepositoryStartupService_$$_javassist_1.newSession(RepositoryStartupService_$$_javassist_1.java)
at com.mmpnc.icm.server.repository.ICMHouseKeepingSessionManager.create(ICMHouseKeepingSessionManager.java:37)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.intercept.RootInvocationContext.proceed(RootInvocationContext.java:31)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:56)
at org.jboss.seam.transaction.RollbackInterceptor.aroundInvoke(RollbackInterceptor.java:28)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.BijectionInterceptor.aroundInvoke(BijectionInterceptor.java:77)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.ICMHouseKeepingSessionManager_$$_javassist_8.create(ICMHouseKeepingSessionManager_$$_javassist_8.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.util.Reflections.invokeAndWrap(Reflections.java:138)
at org.jboss.seam.Component.callComponentMethod(Component.java:2171)
at org.jboss.seam.Component.callCreateMethod(Component.java:2094)
at org.jboss.seam.Component.newInstance(Component.java:2054)
at org.jboss.seam.Component.getInstance(Component.java:1948)
at org.jboss.seam.Component.getInstance(Component.java:1910)
at org.jboss.seam.Component.getInstance(Component.java:1904)
at org.jboss.seam.Component.getInstanceInAllNamespaces(Component.java:2271)
at org.jboss.seam.Component.getValueToInject(Component.java:2223)
at org.jboss.seam.Component.injectAttributes(Component.java:1663)
at org.jboss.seam.Component.inject(Component.java:1481)
at org.jboss.seam.core.BijectionInterceptor.aroundInvoke(BijectionInterceptor.java:61)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.ICMHouseKeepingRepository_$$_javassist_7.create(ICMHouseKeepingRepository_$$_javassist_7.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.util.Reflections.invokeAndWrap(Reflections.java:138)
at org.jboss.seam.Component.callComponentMethod(Component.java:2171)
at org.jboss.seam.Component.callCreateMethod(Component.java:2094)
at org.jboss.seam.Component.newInstance(Component.java:2054)
at org.jboss.seam.Component.getInstance(Component.java:1948)
at org.jboss.seam.Component.getInstance(Component.java:1910)
at org.jboss.seam.Component.getInstance(Component.java:1904)
at org.jboss.seam.Component.getInstanceInAllNamespaces(Component.java:2271)
at org.jboss.seam.Component.getValueToInject(Component.java:2223)
at org.jboss.seam.Component.injectAttributes(Component.java:1663)
at org.jboss.seam.Component.inject(Component.java:1481)
at org.jboss.seam.core.BijectionInterceptor.aroundInvoke(BijectionInterceptor.java:61)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.core.MethodContextInterceptor.aroundInvoke(MethodContextInterceptor.java:44)
at org.jboss.seam.intercept.SeamInvocationContext.proceed(SeamInvocationContext.java:68)
at org.jboss.seam.intercept.RootInterceptor.invoke(RootInterceptor.java:107)
at org.jboss.seam.intercept.JavaBeanInterceptor.interceptInvocation(JavaBeanInterceptor.java:166)
at org.jboss.seam.intercept.JavaBeanInterceptor.invoke(JavaBeanInterceptor.java:102)
at com.mmpnc.icm.server.repository.ICMHouseKeepingManager_$$_javassist_6.create(ICMHouseKeepingManager_$$_javassist_6.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at org.jboss.seam.util.Reflections.invoke(Reflections.java:22)
at org.jboss.seam.util.Reflections.invokeAndWrap(Reflections.java:138)
at org.jboss.seam.Component.callComponentMethod(Component.java:2171)
at org.jboss.seam.Component.callCreateMethod(Component.java:2094)
at org.jboss.seam.Component.newInstance(Component.java:2054)
at org.jboss.seam.Component.getInstance(Component.java:1948)
at org.jboss.seam.Component.getInstance(Component.java:1910)
at org.jboss.seam.Component.getInstance(Component.java:1904)
at org.jboss.seam.Component.getInstance(Component.java:1899)
at com.mmpnc.icm.server.concurrent.PerformCloseTask.call(PerformCloseTask.java:136)
at com.mmpnc.icm.server.concurrent.PerformCloseTask.call(PerformCloseTask.java:1)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:314)
at java.util.concurrent.FutureTask.run(FutureTask.java:149)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
at java.lang.Thread.run(Thread.java:770)
Caused by:
javax.naming.ConfigurationException: A JNDI operation on a "java:" name cannot be completed because the server runtime is not able to associate the operation's thread with any J2EE application component. This condition can occur when the JNDI client using the "java:" name is not executed on the thread of a server application request. Make sure that a J2EE application does not execute JNDI operations on "java:" names within static code blocks or in threads created by that J2EE application. Such code does not necessarily run on the thread of a server application request and therefore is not supported by JNDI operations on "java:" names. [Root exception is javax.naming.NameNotFoundException: Name comp/env/jdbc not found in context "java:".]
at com.ibm.ws.naming.java.javaURLContextImpl.throwExceptionIfDefaultJavaNS(javaURLContextImpl.java:522)
at com.ibm.ws.naming.java.javaURLContextImpl.throwConfigurationExceptionWithDefaultJavaNS(javaURLContextImpl.java:552)
at com.ibm.ws.naming.java.javaURLContextImpl.lookupExt(javaURLContextImpl.java:481)
at com.ibm.ws.naming.java.javaURLContextRoot.lookupExt(javaURLContextRoot.java:485)
at com.ibm.ws.naming.java.javaURLContextRoot.lookup(javaURLContextRoot.java:370)
at org.apache.aries.jndi.DelegateContext.lookup(DelegateContext.java:161)
at javax.naming.InitialContext.lookup(InitialContext.java:436)
at org.apache.jackrabbit.core.util.db.ConnectionFactory.getJndiDataSource(ConnectionFactory.java:280)
... 114 more
Caused by:
javax.naming.NameNotFoundException: Name comp/env/jdbc not found in context "java:".
at com.ibm.ws.naming.ipbase.NameSpace.getParentCtxInternal(NameSpace.java:1969)
at com.ibm.ws.naming.ipbase.NameSpace.retrieveBinding(NameSpace.java:1376)
at com.ibm.ws.naming.ipbase.NameSpace.lookupInternal(NameSpace.java:1219)
at com.ibm.ws.naming.ipbase.NameSpace.lookup(NameSpace.java:1141)
at com.ibm.ws.naming.urlbase.UrlContextImpl.lookupExt(UrlContextImpl.java:1436)
at com.ibm.ws.naming.java.javaURLContextImpl.lookupExt(javaURLContextImpl.java:477)
... 119 more

Okay "damorgan", you seem to have me confused with a newbie. All I'm posting is the info that I got from my Sys Admin on the fix to my problem I encountered when trying to install Oracle 11g (11.2.0.0) on Red Hat Linux Enterprise 5. Since we're mouting onto an NFS, these are the steps he took. I'm not trying to "hide" information or post as little as possible. What other info do you want? I don't know what you are referring to when you mention "Filer, make, model, software version"? Please elaborate. I was just trying to post to others that may have encountered this problem, and I get somewhat attacked by you. I don't assume anyone can read my mind (especially you).

Two instances running at the same time on one machine - error ORA-28547

Hi,
I am running Windows XP (32-bit) and Oracle 10gR2 (10.2.0.3) and would like to run two services at the same time (NE and NE2). Configures my listerner like
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = NE)
      (ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = NE2)
      (ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dgregor-d630)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)tnsnames.ora
# tnsnames.ora Network Configuration File: D:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
NE2 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = dgregor-d630)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = NE2)
NE =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dgregor-d630)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = NE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
)I am getting error
ORA-28547: connection to server failed, probable Oracle Net admin error
In the registry I am aware of the ORACLE_SID entry, but it is reserved only for one value (NE or NE2).
How should I configure it to run both Oracle services at the same time?
Thanks!
D

Hi,
Please post your question in the appropriate forum/group.
Database
http://forums.oracle.com/forums/category.jspa?categoryID=18
Thanks,
Hussein

ColdFusion 5 - will it run under Windows 2003 Enterprise Server R2?

I currently have ColdFusion 5 running on Windows 2000 and
need to upgrade the os
to 2003 Enterprise R2. I don't know, but I'm guessing, it
will easier to continue using 5
than to upgrade to 7 or 8.

It could be a couple things;
CTC only runs (and / or only runs well) on the specified version of JRE. It doesn't like anything older, it doesn't like anything newer ... the suggested version (1.3.something last time I looked - I don't remember off the top of my head).
CTC takes forever to initialize (in some cases on our Lab stuff, I'm talking minutes ... up to 5-7 MINUTES before anything comes up).
Start it and go have lunch, if it's not up when you get back, downrev your JRE and try again (then go home for the night, and see if it's up in the morning).
If it's still not up, then try it on Windows 2000 server (or a VMware / VirtualPC session on S2003).
If you're running it through something like a Citrix server, take a vacation for a few days ....
This is not one of Cisco's finest software endeavours.
Good Luck
Scott

Migrate a project from BPM Studio to enterprise server

Hi
can anyone can help me and explain me how to migrate or deploy a project from BPM studio to the BPM enterprise server????????
thanks

From studio, right click on the project, and go to export. This will give you a .exp file which contains all the information relating to the project.
Assuming you have correctly installed Enterprise, just open up the process administrator, go to projects, select deploy, and browse to the location of your .exp file.
Its that easy!
HTH
-Kevin

Differences between Oracle BPM and Aqualogic BPM 6.0

Hello,
Does anyone know where I can find information that spells out the differences between Aqualogic 6.0 and Oracle BPM (if there are any)? I've searched the Oracle sites, documentation sections, etc. and I cannot find a datasheet that spells out anything related to the differences between the two aside from the name change.
Thank you.

I thought that there no major differences between the versions, only changes in the skin, logo and an improvement in the engine, but I was wrong.
My production enviroment runs BPM Enterprise in version 6, in other words runs Aqualogic BPM Enterprise, not Oracle BPM Enterprise, but in the development enviroment I made the decision to use the version 10 (Oracle BPM Studio 10g), because I thought there were no considerable changes between versions.
So I could not make the deployment of the project in the enterprise version, the log reported that many processes and screenflows of the project were not found, then I tried to open the project that was done in version 10 in version 6 of the BPM Studio and then try to export the ".exp" to try to do the deployment again. When I opened the project in BPM Studio 6 some errors occurred, but no significant errors. I fixed the errors, export the project again and try to do the deployment in the enterprise version and the same problems as before still occurring.
The only solution I found was to make the project in BPM Studio 6.04 (Aqualogic). Now I can make the deployment of the project in the production environment.
Conclusion: always use the same version in BPM studio/enterprise. If you use Oracle BPM Studio in development enviroment, use Oracle BPM Enterprise for production enviroment. The same way if you use Aqualogic BPM Studio in development enviroment, use Aqualogic BPM Enterprise in the production enviroment.

PAPI Web Service (PAPI-WS) Example for Oracle BPM Enterprise Standalone

Here is the location of a step-by-step explanation on how to use PAPI Web Service (PAPI-WS) to create a work item instance and then run the instance inside an activity in a process running on Oracle BPM Enterprise Standalone.
http://www.4shared.com/file/128249957/9bd6ef61/PAPI-WS_for_Oracle_BPM_Standalone.html
Be sure to use the project that is in the zip file for this example.
To see how to invoke PAPI-WS when using Oracle BPM Studio, go to this thread: PAPI Web Service (PAPI-WS) Example for Oracle BPM Studio
If you need a step-by-step example of how to use PAPI (the Java API) go to this thread: Creating a new work item instance in a process using PAPI
Hope this helps,
Dan

Dan,
I tried in both studio and Standalone.
From Studio :*
1. The Url for the Webservice is (http://localhost:8585/papiws/PapiWebServiceEndpoint?wsdl). From studio by default port number was 8585.From this studio wsdl URL(http://localhost:8585/papiws/PapiWebServiceEndpoint?wsdl),I did n't see any wsdl text in the browser.
From Standalone :*
1. In BPM Admin Center, I have selected *"PAPI Web Services"* check box(Page 5 of your document).
2. In The BPM Admin Center, I have clicked on *"Start BPM Web Applications"*.
3. After Stand alone server started *"Launch PAPI WebServices Console"* link was enabled,And I clicked on that link.It opened a browser with URL (http://localhost:8686/papiws/PapiWebService)
Oracle® BPM PAPI Web Services
Service Name 'PapiWebService'
Style: Document Literal Wrapped
SSO Enabled: false
WS-Security UsernameToken Profile Authentication Enabled: false
HTTP Basic Authentication Enabled: true
Preset Authentication Enabled: false
MTOM Optimization for attachments Enabled*: false
Endpoint: http://localhost:8686/papiws/PapiWebServiceEndpoint
WSDL: http://localhost:8686/papiws/PapiWebServiceEndpoint?wsdl
I have copied wsdl URL(http://localhost:8686/papiws/PapiWebServiceEndpoint?wsdl) and pasted it into a browser's URL field.I did n't see any wsdl text in the browser,but I see following error
HTTP Status 404 - Servlet PapiWebServiceServlet is not available
type Status report
message Servlet PapiWebServiceServlet is not available
description The requested resource (Servlet PapiWebServiceServlet is not available) is not available.
Apache Tomcat/5.5.15
Edited by: Prabhasankar on Dec 24, 2010 9:10 AM

Oracle service with two instances

I have for some reason (maybe related to my experimenting with rman?) found myself with two instances running from the same service. I cannot conect now, as I get the ORA- 12560 TNS protocol adapter error.
I checked lsnrctl and see this:
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "dan.doad" has 2 instance(s).
Instance "dan", status UNKNOWN, has 1 handler(s) for this service...
Instance "dan", status READY, has 1 handler(s) for this service...
Service "danXDB.doral" has 1 instance(s).
Instance "dan", status READY, has 1 handler(s) for this service...
IS this a reason why I am getting the error?
I am 9.2. I have checked tnsnames.ora, I have stopped and restarted services.
Thanks.

Dan, the first list of the listener status is fine.
Does the target db have a password file configured? If not, you cannot connect as using sysdba remotely.
The first connect is just a normal connection as user system who normally has the DBA role and is different from signing on like sqlplus "system as sysdba"
HTH -- Mark D Powell --

Two instances, two OSE endpoints?

If you have two instances running on the same machine, can they (should they) both share the same tcp/ip endpoint for OSE connections?
null

If you have two instances running on the same machine, can they (should they) both share the same tcp/ip endpoint for OSE connections?
null

Two instances running in AquaLogic BPM Enterprise Server 6.0 Standalone

Similar Messages

Maybe you are looking for