Two issues, firefox crashes and does not close the process

I am a web developer, so I am contently messing about with websites,
I start firefox and open up wordpress for example and also have filezilla open and notepad++ on my computer as well as firefox all at the same time.
I edit something and refresh firefox, it hangs, but it does not stop hanging so I have to restart firefox, but the process is still running so I have to stop the process from task manager in order to restart firefox again.
This should not happen, not only does it happen regularly but it happens after refreshing pages after an edit
of course I have tried switching off plugins and even my internet security but its still doing it. I have taken to using opera instead of firefox when developing websites but I much prefer firefox layout..
I need all these programs open by the way in order to achieve my work.
any ideas ?.. thanks

Similar Messages

Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

Welcome to Apple Support Communities
Press Alt, Command and Esc keys, select the crashed app and force quit it. Then, open this app again.
If you didn't save this document, it's possible that you lost the changes you made unless you have OS X Lion or Mountain Lion and they saved your document automatically

Excel opens and does not close when using the OI classes for some users...

Hello Experts,
I am using the OI classes(i_oi_container_control, i_oi_error, i_oi_document_proxy, i_oi_spreadsheet) to transfer Excel data to my itab. The problem we are encountering is that for some users the excel automatically opens and does not close. But in my case it is not opening so it is fine in my case. In my code I am already using the 'CLOSE_DOCUMENT' and 'RELEASE_DOCUMENT'.

Viraylab,
Check by any case you set the parameter register_on_close_event of the method init_control? Dont set the parameter as it will look for the corressponding custom code in your program. Also try with the method release_all_documents.
Regards,
Kiran Bobbala

I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?

I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer. The issue is my system does not support the newer version. Does anyone know how I can get around this?

Apple wanted to charge me 50 bucks jsut to talk to someone!
I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
Can you get to an AppleStore Genius Bar?
They may be able to fix this for you. No charge.
I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

Firefox crashes - even when not using the computer

Firefox crashes - even when not using the computer
Sometimes I can walk away from the computer and only have one tab open (e.g. Facebook) and when I come back to the computer a few hours later, Firefox has crashed for no reason.

Unfortunately the linked crash report is empty (@ EMPTY: no crashing thread identified; corrupt dump) and doesn't include any data, so it is not possible to find the cause of the crash.
Did you recently submitted other crash reports that were submitted and show a crashing thread?
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Itunes 10.6.1.7 I have 2 sets of playlists the first set displays greyed out lists and does not work The second set is fine. How do I get rid of the non working set of playlists?

I have 2 sets of playlists in the sidebar of itunes. I have recently upgraded to 10.6.1.7 but this condition remains the same
The top list refers to greyed out listings and does not function
The list below works fine
How do I get rid of the "false" list?

I think the greyed out playlists must be listed from your device which is set up to mirror your library. Because the device is synced you can't edit content directly on the device. From the top of the left-hand column do you have?
Library > Music, Movies...
Store > iTunes Store, iTunes Match...
Devices > <Your Device> > Music, Movies, and all the other "dummy" lists...
Genius > Genius, Genius Mixes...
Playlists > iTunes DJ, and then all your playlist folders and playlists...
If so then that is perfectly normal when your device is connected, either directly or over wi-fi and you have the lists expanded. Simply click the small triangle to the left of the device name to hide all the playlists.
tt2

[svn:fx-trunk] 13136: Fix for FLEXENT-1196 ( Replay of click on NavigatorContent does not close the combobox)

Revision: 13136
Revision: 13136
Author:   [email protected]
Date:     2009-12-21 17:40:28 -0800 (Mon, 21 Dec 2009)
Log Message:
Fix for FLEXENT-1196 (Replay of click on NavigatorContent does not close the combobox)
We need not record OPEN event when it is triggered from a KeyBoard event that types a character. Replaying the type event would automatically open the drop down.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXENT-1196
Modified Paths:
    flex/sdk/trunk/frameworks/projects/automation_spark/src/spark/automation/delegates/compon ents/SparkComboBoxAutomationImpl.as
    flex/sdk/trunk/frameworks/projects/automation_spark/src/spark/automation/delegates/compon ents/supportClasses/SparkDropDownListBaseAutomationImpl.as

TS3274 how do I get the keyboard to come up -- without re-botting? On the ipad2, it occasionally freezes and does not permit the keyboard to appear

how do I get the keyboard to come up -- without re-booting? On the ipad2, it occasionally freezes and does not permit the keyboard to appear

Have you the latest iOS version (5.1.1)? If not, an update might solve the problem.

Are there any apps which will allow local calling using data only that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?

Are there any apps which will allow local calling using data only (not minutes, no extra charge) that do not require any special numbers called out initially and does not require the receiver to have a similar app or account? Just for random local calling.

Yup.
Here is a way you could solve this by adding an extra column and a small lookup table:
The lookup table is here for the copying:
0
1
k
kilo
2
M
mega
3
G
giga
4
T
tera
5
P
peta
6
E
exa
7
Z
zetta
8
Y
yotta
In table 8 (the one on the left in the image) column A is where the values are.
B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
select cell B1, copy,
now select all the cells in column B, paste

TS3274 Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

- First try clciking the Home button one and try again.
- Next reset the iPod. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then restore from backup
- Restore to factory defaults/new iPod

HT5312 I forgot my security questions answer and does not have the rescue Email.

I forgot my security questions answer and does not have the rescue Email.

If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

[svn:fx-trunk] 10608: Fix FB-19648: 'Terminate' action during debugging does not close the browser on Mac if path contains spaces

Revision: 10608
Author:   [email protected]
Date:     2009-09-25 16:30:55 -0700 (Fri, 25 Sep 2009)
Log Message:
Fix FB-19648: 'Terminate' action during debugging does not close the browser on Mac if path contains spaces
Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-19648
Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Revision: 10608
Author:   [email protected]
Date:     2009-09-25 16:30:55 -0700 (Fri, 25 Sep 2009)
Log Message:
Fix FB-19648: 'Terminate' action during debugging does not close the browser on Mac if path contains spaces
Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-19648
Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

After I updated OTA stopped taking charge and does not find the network.

Почему после обновления ОТА перестал брать зарядку и не находит сеть?????????????? z10 stl100-2
After I updated OTA stopped taking charge and does not find the network.
И такая же проблема на всех 10.3.1. прошивках, а на 10.3.0. такого нет и даже не знаю с чем это связано, Живу в Белоруссии,
And the same problem on all 10.3.1. firmware, and 10.3.0. such is not and do not even know what it is connected, I live in Belarus, help pls

Привет!
В общем вышла новая прощивка ОС 10.3.1.2558 для Blackberry z30 - она оффициальная только для з30, но я себе поставил на з10 и все норм. На форумах Крэкберри, ребята с такой же проблемой (нет сигнала, аккум не заряжается, камера не работает) исправили все эти ошибки установив данную прошивку.
Я вчера тоже поставил ее себе на телефон и все работает, вообще нет никаких проблем. Я устанавливал автолоадер.
В общем мне эта прошивка решила все проблемы и полноценно теперь пользуюсь 10.3.1
Удачи!

Two issues, firefox crashes and does not close the process

Similar Messages

Maybe you are looking for