Two issues - Having to constantly reconnect and wireless not working (now) on WRT54G

I believe my router is a model WRT54G (it's a G or GL).  First problem - I have a laptop and a PC with wireless cards.  Both have connected at one time or another to my router, but neither work now.  They both show "acquiring connection & IP", then "Connected", but the connection cannot be used to go to the Internet.  I CAN get into my primary wired PC from these two, though.
We've rebooted the PCs, turned the router and the cards on and off (router off for several minutes), disabled and reenabled the connections - no luck.
Second issue - on my primary wired connection, and before we had the issues, on the other two devices, I'll try to go to a web page, and be prompted to "Connect".  This will happen several times in a session, not just when I first open my browser.
I can't believe this problem is unique to me.
Advice would be appreciated - thanks. 

hi... try power cycling the n/w, power down the modem and router, wait for couple of minutes,power up the modem first once modem is rebooted power up the router...check whether it makes any difference or not, if it still doesn't work you may need to reset the router back to factory default settings by pressing reset button on the back panel of router about 30 seconds, power cycle the n/w and check whether it works or not... also let me know which internet connection you are using so that i can tell you step by step configuration of router and wireless settings...

Similar Messages

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    As Peter says above, only an Apple Store genius can advise you.
    But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement.  That is not necessarily true.  Let them look at it and advise you what the remedy is.  They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

  • Vim issues...meta keys and colorscheme not working correctly

    The first issue isn't really a vim problem, but it's related.  When running Vim in a terminal, my meta key bindings don't work.  I've tracked it down to a problem with Xfce's Terminal as noted here: http://vimdoc.sourceforge.net/htmldoc/m … p-alt-keys
    ...but I'm not sure exactly how to fix it.  I suppose I could always switch to another terminal, but I'd like to stick with Xfce's version if possible.
    The second issue is that my color scheme isn't being set when I first load up gVim.  As soon as I open a file, it properly displays, but the "splash" page doesn't show it.  I'm using desert (who doesn't) and this is what it looks like when I first load up gVim:
    I did stop using a separate <code>.gvimrc</code> in favor of putting everything in my <code>.vimrc</code> file under a conditional, and all the other settings work just fine.  Here's what that conditional looks like:
    if has( "gui_running" )
    set columns=84 " Set the window's width
    set lines=43 " Set the window's height
    set guioptions-=T " Remove the toolbar from the window
    set guifont=Terminus 12 " Use a clean monospaced font
    colorscheme desert
    else
    set background=dark
    colorscheme desert
    endif
    In case you're curious, here's my entire <code>.vimrc</code> file.

    phrakture wrote:IIRC this happens for because gvim does not find a ~/.gvimrc and reads /etc/gvimrc after ~/.vimrc (I think).
    Try symlinking ~/.vimrc to ~/.gvimrc
    That solved the problem for me. Thanks 

  • Safari is not happy and iphoto not working now

    I have a mac mini OSX 10.9.2  2.3 ghz intel core iS   8GB memory          I intstalled maverick a couple months back, and life has never been the same since. things were just slower, at first, and I can live with that. But it latest weeks Safari has been having issues like freezing when I try to swipe a page (which seemed to go away after a few days) - one current  big  issue is that I cannot shut it  or quit safari now.  I can only force quit it. Finally I started using Firefox to get around the safari problem. Now when I try to open iPhoto, I get a message "Iphoto has unexpectedly quit" with a long list of information thats greek to me.  My level of expertise is low, so please talk in simple steps for me.
    Please give me some guidance, anyone??? Has something invaded my computer?  thank you!!!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • How do I set up Mail for ATT email?  It was previously working and does not work now.

    I had my ATT email working.  It will only let me set it up as an IMAP account via Yahoo, however the ATT web site says that I should be setting it up as a POP3.  Either way it's a no go.  Has anyone had an ATT IMAP email account that worked and all of a sudden decided not to work?

    I see dropdown menus for SMTP SSL and IMAP/POP SSL. I have them both set as "Require"
    Do not to this if your server is handling incoming mail from outside your network.
    Few remote mail servers will use SSL, so if your server requires SSL then you will not be able to receive mail from outside your domain.
    'Use', on the other hand, advertises the fact your server supports SSL, so clients and remote servers can use if if they like, but this still allows other mail in.
    What should "Authentication" be - "Login" or "Plain"
    Do not use Plain unless you absolutely trust all your clients (i.e. they're all on a LAN or all using SSL). Plain sends an unencrypted password over the wire, which is susceptible to sniffing.
    what will the client be using?
    Whatever you set it to.
    The client complains about a correct root certificate not being installed).
    Are you using a self-signed certificate? if so, you're going to get that unless you do a lot of extra work. Getting a real certificate from a trusted authority should resolve this.
    As for the slow connections, the use of SSL shouldn't significantly impact connection or delivery/transfer times, so something else is amiss.

  • Wired and Wireless sometimes work (mostly not) after update.

    So I have an issue with my network connection.  It sometimes works, sometimes doesn't (mostly doesn't).  This is for both wired and wireless.  This started to happen a couple of days ago after an update.  I had not updated for about a month prior.  Prior to the update I used WICD and it worked just fine with no problems.  I have no exotic hardware (ipw2200 using its firmware, dell xps gen2 notebook) and I set up everything about 6 months ago based on all the wikis.  I have a dlink dir-825 router.  Both wired and wireless connections work in windows every boot so it's not hardware.
    I've included as much info as possible... sorry for the length.
    Things I've tried:
    Removing the ! from the INTERFACES=(!eth0 !eth1) in rc.conf
    Removing netfs from the daemons
    all the hostnames match in hosts and rc.conf
    Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="local"
    USEDIRECTISA="no"
    TIMEZONE="America/New_York"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_userspace fuse ipw2200)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="yes"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="stupendiousman"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # DHCP:     Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(!eth0 !eth1)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng hal cpufreq wicd alsa crond fam bluetooth)
    Here is my hosts
    # /etc/hosts: static lookup table for host names
    #<ip-address>   <hostname.domain.org>   <hostname>
    127.0.0.1               localhost.localdomain   localhost stupendiousman
    # End of file
    Here is my mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run.  Advanced users may wish to specify all system modules
    # in this array.  For instance:
    #     MODULES="piix ide_disk reiserfs"
    MODULES=""
    CRYPTO_MODULES="aes_generic aes_i586 dm_crypt xts"
    # BINARIES
    # This setting includes, into the CPIO image, and additional
    # binaries a given user may wish.  This is run first, so may
    # be used to override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten is already added)
    # BINARIES are dependancy parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in anyway.  This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options,
    # like so:
    #    FILES="/etc/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file.  The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'modload' may be used in place of 'udev', but is not recommended
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    #    This setup specifies all modules in the MODULES setting above.
    #    No raid, lvm2, or encrypted root is needed.
    #    HOOKS="base"
    #    This setup will autodetect all modules for your system and should
    #    work as a sane default
    #    HOOKS="base udev autodetect pata scsi sata filesystems"
    #    This is identical to the above, except the old ide subsystem is
    #    used for IDE devices instead of the new pata subsystem.
    #    HOOKS="base udev autodetect ide scsi sata filesystems"
    #    This setup will generate a 'full' image which supports most systems.
    #    No autodetection is done.
    #    HOOKS="base udev pata scsi sata usb filesystems"
    #    This setup assembles an pata raid array with an encrypted root FS.
    #    Note: See 'mkinitcpio -H raid' for more information on raid devices.
    #    HOOKS="base udev pata raid encrypt filesystems"
    #    This setup loads an lvm2 volume group on a usb device.
    #    HOOKS="base udev usb lvm2 filesystems"
    HOOKS="base udev autodetect pata scsi sata encrypt lvm2 resume filesystems firmware"
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation NV41.9 [GeForce Go 6800 Ultra] (rev a2)
    03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
    03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
    03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
    03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
    03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
    ifconfig returns:
    [rick@stupendiousman ~]$ ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:12:F0:3E:CA:66 
              inet6 addr: fe80::212:f0ff:fe3e:ca66/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:4454 (4.3 Kb)
              Interrupt:17 Base address:0x6000 Memory:dcfef000-dcfeffff
    eth1      Link encap:Ethernet  HWaddr 00:11:43:72:B5:96 
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
              Interrupt:18
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:280 (280.0 b)  TX bytes:280 (280.0 b)
    If I do a iwlist scan I get:
    [rick@stupendiousman ~]$ iwlist scan
    lo        Interface doesn't support scanning.
    eth0      No scan results
    eth1      Interface doesn't support scanning.
    pan0      Interface doesn't support scanning.
    Here is a portion of my /var/log/wicd/wicd.log
    2009/08/15 09:19:29 :: ---------------------------
    2009/08/15 09:19:29 :: wicd initializing...
    2009/08/15 09:19:29 :: ---------------------------
    2009/08/15 09:19:29 :: wicd is version 1.6.2 436
    2009/08/15 09:19:29 :: setting backend to external
    2009/08/15 09:19:29 :: trying to load backend external
    2009/08/15 09:19:30 :: successfully loaded backend external
    2009/08/15 09:19:30 :: trying to load backend external
    2009/08/15 09:19:30 :: successfully loaded backend external
    2009/08/15 09:19:30 :: Automatically detected wireless interface eth0
    2009/08/15 09:19:30 :: setting wireless interface eth1
    2009/08/15 09:19:30 :: automatically detected wired interface eth1
    2009/08/15 09:19:30 :: setting wired interface eth0
    2009/08/15 09:19:30 :: setting wpa driver wext
    2009/08/15 09:19:30 :: setting use global dns to False
    2009/08/15 09:19:30 :: setting global dns
    2009/08/15 09:19:30 :: global dns servers are None None None
    2009/08/15 09:19:30 :: domain is None
    2009/08/15 09:19:30 :: search domain is None
    2009/08/15 09:19:30 :: setting automatically reconnect when connection drops True
    2009/08/15 09:19:30 :: Setting dhcp client to 0
    2009/08/15 09:19:30 :: Wireless configuration file found...
    2009/08/15 09:19:30 :: Wired configuration file found...
    2009/08/15 09:19:30 :: chmoding configuration files 0600...
    2009/08/15 09:19:30 :: chowning configuration files root:root...
    2009/08/15 09:19:30 :: Using wireless interface...eth1
    2009/08/15 09:19:30 :: Using wired interface...eth0
    2009/08/15 09:19:36 :: Autoconnecting...
    2009/08/15 09:19:39 :: Attempting to autoconnect with wired interface...
    2009/08/15 09:19:39 :: Putting interface down
    2009/08/15 09:19:39 :: Releasing DHCP leases...
    2009/08/15 09:19:39 :: Setting false IP...
    2009/08/15 09:19:39 :: Flushing the routing table...
    2009/08/15 09:19:39 :: Putting interface up...
    2009/08/15 09:19:39 :: Running DHCP
    2009/08/15 09:19:39 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:19:39 ::
    2009/08/15 09:19:39 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:19:39 ::
    2009/08/15 09:20:09 :: dhcpcd: timed out
    2009/08/15 09:20:09 ::
    2009/08/15 09:20:09 :: DHCP connection failed
    2009/08/15 09:20:09 :: exiting connection thread
    2009/08/15 09:20:11 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 09:20:11 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 09:20:11 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:21:03 :: trying to load backend ioctl
    2009/08/15 09:21:03 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
    2009/08/15 09:21:03 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
    2009/08/15 09:21:03 :: trying to load backend external
    2009/08/15 09:21:10 :: Putting interface down
    2009/08/15 09:21:10 :: Releasing DHCP leases...
    2009/08/15 09:21:10 :: Setting false IP...
    2009/08/15 09:21:10 :: Flushing the routing table...
    2009/08/15 09:21:10 :: Putting interface up...
    2009/08/15 09:21:10 :: Running DHCP
    2009/08/15 09:21:10 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:21:10 ::
    2009/08/15 09:21:10 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:21:10 ::
    2009/08/15 09:21:40 :: dhcpcd: timed out
    2009/08/15 09:21:40 ::
    2009/08/15 09:21:40 :: DHCP connection failed
    2009/08/15 09:21:40 :: exiting connection thread
    2009/08/15 09:21:40 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:22:28 :: Putting interface down
    2009/08/15 09:22:28 :: Releasing DHCP leases...
    2009/08/15 09:22:28 :: Setting false IP...
    2009/08/15 09:22:28 :: Flushing the routing table...
    2009/08/15 09:22:28 :: Putting interface up...
    2009/08/15 09:22:28 :: Running DHCP
    2009/08/15 09:22:28 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:22:28 ::
    2009/08/15 09:22:28 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:22:28 ::
    2009/08/15 09:22:58 :: dhcpcd: timed out
    2009/08/15 09:22:58 ::
    2009/08/15 09:22:58 :: DHCP connection failed
    2009/08/15 09:22:58 :: exiting connection thread
    2009/08/15 09:22:58 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:23:17 :: Daemon going down, killing wicd-monitor...
    2009/08/15 09:23:17 :: Removing PID file...
    2009/08/15 09:23:17 :: Shutting down...
    2009/08/15 13:16:59 :: ---------------------------
    2009/08/15 13:16:59 :: wicd initializing...
    2009/08/15 13:16:59 :: ---------------------------
    2009/08/15 13:16:59 :: wicd is version 1.6.2 436
    2009/08/15 13:16:59 :: setting backend to external
    2009/08/15 13:16:59 :: trying to load backend external
    2009/08/15 13:17:00 :: successfully loaded backend external
    2009/08/15 13:17:00 :: trying to load backend external
    2009/08/15 13:17:00 :: successfully loaded backend external
    2009/08/15 13:17:00 :: Automatically detected wireless interface eth0
    2009/08/15 13:17:00 :: setting wireless interface eth1
    2009/08/15 13:17:00 :: automatically detected wired interface eth1
    2009/08/15 13:17:00 :: setting wired interface eth0
    2009/08/15 13:17:00 :: setting wpa driver wext
    2009/08/15 13:17:00 :: setting use global dns to False
    2009/08/15 13:17:00 :: setting global dns
    2009/08/15 13:17:00 :: global dns servers are None None None
    2009/08/15 13:17:00 :: domain is None
    2009/08/15 13:17:00 :: search domain is None
    2009/08/15 13:17:00 :: setting automatically reconnect when connection drops True
    2009/08/15 13:17:00 :: Setting dhcp client to 0
    2009/08/15 13:17:00 :: Wireless configuration file found...
    2009/08/15 13:17:00 :: Wired configuration file found...
    2009/08/15 13:17:00 :: chmoding configuration files 0600...
    2009/08/15 13:17:00 :: chowning configuration files root:root...
    2009/08/15 13:17:00 :: Using wireless interface...eth1
    2009/08/15 13:17:00 :: Using wired interface...eth0
    2009/08/15 13:17:06 :: Autoconnecting...
    2009/08/15 13:17:09 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:17:09 :: Putting interface down
    2009/08/15 13:17:09 :: Releasing DHCP leases...
    2009/08/15 13:17:09 :: Setting false IP...
    2009/08/15 13:17:09 :: Flushing the routing table...
    2009/08/15 13:17:09 :: Putting interface up...
    2009/08/15 13:17:09 :: Running DHCP
    2009/08/15 13:17:09 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:17:09 ::
    2009/08/15 13:17:09 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:17:09 ::
    2009/08/15 13:17:39 :: dhcpcd: timed out
    2009/08/15 13:17:39 ::
    2009/08/15 13:17:39 :: DHCP connection failed
    2009/08/15 13:17:39 :: exiting connection thread
    2009/08/15 13:17:41 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:17:41 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:17:41 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:18:10 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:18:10 :: Removing PID file...
    2009/08/15 13:18:10 :: Shutting down...
    2009/08/15 13:19:01 :: ---------------------------
    2009/08/15 13:19:01 :: wicd initializing...
    2009/08/15 13:19:01 :: ---------------------------
    2009/08/15 13:19:01 :: wicd is version 1.6.2 436
    2009/08/15 13:19:01 :: setting backend to external
    2009/08/15 13:19:01 :: trying to load backend external
    2009/08/15 13:19:02 :: successfully loaded backend external
    2009/08/15 13:19:02 :: trying to load backend external
    2009/08/15 13:19:02 :: successfully loaded backend external
    2009/08/15 13:19:02 :: Automatically detected wireless interface eth0
    2009/08/15 13:19:02 :: setting wireless interface eth1
    2009/08/15 13:19:02 :: automatically detected wired interface eth1
    2009/08/15 13:19:02 :: setting wired interface eth0
    2009/08/15 13:19:02 :: setting wpa driver wext
    2009/08/15 13:19:02 :: setting use global dns to False
    2009/08/15 13:19:02 :: setting global dns
    2009/08/15 13:19:02 :: global dns servers are None None None
    2009/08/15 13:19:02 :: domain is None
    2009/08/15 13:19:02 :: search domain is None
    2009/08/15 13:19:02 :: setting automatically reconnect when connection drops True
    2009/08/15 13:19:02 :: Setting dhcp client to 0
    2009/08/15 13:19:02 :: Wireless configuration file found...
    2009/08/15 13:19:02 :: Wired configuration file found...
    2009/08/15 13:19:02 :: chmoding configuration files 0600...
    2009/08/15 13:19:02 :: chowning configuration files root:root...
    2009/08/15 13:19:02 :: Using wireless interface...eth1
    2009/08/15 13:19:02 :: Using wired interface...eth0
    2009/08/15 13:19:08 :: Autoconnecting...
    2009/08/15 13:19:11 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:19:11 :: Putting interface down
    2009/08/15 13:19:11 :: Releasing DHCP leases...
    2009/08/15 13:19:11 :: Setting false IP...
    2009/08/15 13:19:11 :: Flushing the routing table...
    2009/08/15 13:19:11 :: Putting interface up...
    2009/08/15 13:19:11 :: Running DHCP
    2009/08/15 13:19:11 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:19:11 ::
    2009/08/15 13:19:11 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:19:11 ::
    2009/08/15 13:19:41 :: dhcpcd: timed out
    2009/08/15 13:19:41 ::
    2009/08/15 13:19:41 :: DHCP connection failed
    2009/08/15 13:19:41 :: exiting connection thread
    2009/08/15 13:19:43 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:19:43 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:19:43 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:30:36 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:30:36 :: Removing PID file...
    2009/08/15 13:30:36 :: Shutting down...
    2009/08/15 13:31:29 :: ---------------------------
    2009/08/15 13:31:29 :: wicd initializing...
    2009/08/15 13:31:29 :: ---------------------------
    2009/08/15 13:31:29 :: wicd is version 1.6.2 436
    2009/08/15 13:31:29 :: setting backend to external
    2009/08/15 13:31:29 :: trying to load backend external
    2009/08/15 13:31:30 :: successfully loaded backend external
    2009/08/15 13:31:30 :: trying to load backend external
    2009/08/15 13:31:30 :: successfully loaded backend external
    2009/08/15 13:31:30 :: Automatically detected wireless interface eth0
    2009/08/15 13:31:30 :: setting wireless interface eth1
    2009/08/15 13:31:30 :: automatically detected wired interface eth1
    2009/08/15 13:31:30 :: setting wired interface eth0
    2009/08/15 13:31:30 :: setting wpa driver wext
    2009/08/15 13:31:30 :: setting use global dns to False
    2009/08/15 13:31:30 :: setting global dns
    2009/08/15 13:31:30 :: global dns servers are None None None
    2009/08/15 13:31:30 :: domain is None
    2009/08/15 13:31:30 :: search domain is None
    2009/08/15 13:31:30 :: setting automatically reconnect when connection drops True
    2009/08/15 13:31:30 :: Setting dhcp client to 0
    2009/08/15 13:31:30 :: Wireless configuration file found...
    2009/08/15 13:31:30 :: Wired configuration file found...
    2009/08/15 13:31:30 :: chmoding configuration files 0600...
    2009/08/15 13:31:30 :: chowning configuration files root:root...
    2009/08/15 13:31:30 :: Using wireless interface...eth1
    2009/08/15 13:31:30 :: Using wired interface...eth0
    2009/08/15 13:31:37 :: Autoconnecting...
    2009/08/15 13:31:39 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:31:39 :: Putting interface down
    2009/08/15 13:31:39 :: Releasing DHCP leases...
    2009/08/15 13:31:39 :: Setting false IP...
    2009/08/15 13:31:39 :: Flushing the routing table...
    2009/08/15 13:31:39 :: Putting interface up...
    2009/08/15 13:31:39 :: Running DHCP
    2009/08/15 13:31:39 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:31:39 ::
    2009/08/15 13:31:40 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:31:40 ::
    2009/08/15 13:32:09 :: dhcpcd: timed out
    2009/08/15 13:32:09 ::
    2009/08/15 13:32:09 :: DHCP connection failed
    2009/08/15 13:32:09 :: exiting connection thread
    2009/08/15 13:32:12 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:32:12 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:32:12 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:38:00 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:38:00 :: Removing PID file...
    2009/08/15 13:38:00 :: Shutting down...
    2009/08/15 13:39:19 :: ---------------------------
    2009/08/15 13:39:19 :: wicd initializing...
    2009/08/15 13:39:19 :: ---------------------------
    2009/08/15 13:39:19 :: wicd is version 1.6.2 436
    2009/08/15 13:39:19 :: setting backend to external
    2009/08/15 13:39:19 :: trying to load backend external
    2009/08/15 13:39:20 :: successfully loaded backend external
    2009/08/15 13:39:20 :: trying to load backend external
    2009/08/15 13:39:20 :: successfully loaded backend external
    2009/08/15 13:39:20 :: Automatically detected wireless interface eth0
    2009/08/15 13:39:20 :: setting wireless interface eth1
    2009/08/15 13:39:20 :: automatically detected wired interface eth1
    2009/08/15 13:39:20 :: setting wired interface eth0
    2009/08/15 13:39:20 :: setting wpa driver wext
    2009/08/15 13:39:20 :: setting use global dns to False
    2009/08/15 13:39:20 :: setting global dns
    2009/08/15 13:39:20 :: global dns servers are None None None
    2009/08/15 13:39:20 :: domain is None
    2009/08/15 13:39:20 :: search domain is None
    2009/08/15 13:39:20 :: setting automatically reconnect when connection drops True
    2009/08/15 13:39:20 :: Setting dhcp client to 0
    2009/08/15 13:39:20 :: Wireless configuration file found...
    2009/08/15 13:39:20 :: Wired configuration file found...
    2009/08/15 13:39:20 :: chmoding configuration files 0600...
    2009/08/15 13:39:20 :: chowning configuration files root:root...
    2009/08/15 13:39:20 :: Using wireless interface...eth1
    2009/08/15 13:39:20 :: Using wired interface...eth0
    2009/08/15 13:39:27 :: Autoconnecting...
    2009/08/15 13:39:29 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:39:29 :: Putting interface down
    2009/08/15 13:39:29 :: Releasing DHCP leases...
    2009/08/15 13:39:29 :: Setting false IP...
    2009/08/15 13:39:29 :: Flushing the routing table...
    2009/08/15 13:39:29 :: Putting interface up...
    2009/08/15 13:39:29 :: Running DHCP
    2009/08/15 13:39:29 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:39:29 ::
    2009/08/15 13:39:30 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:39:30 ::
    2009/08/15 13:39:59 :: dhcpcd: timed out
    2009/08/15 13:39:59 ::
    2009/08/15 13:39:59 :: DHCP connection failed
    2009/08/15 13:39:59 :: exiting connection thread
    2009/08/15 13:40:02 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:40:02 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:40:02 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:45:10 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:45:10 :: Removing PID file...
    2009/08/15 13:45:10 :: Shutting down...
    2009/08/15 13:46:13 :: ---------------------------
    2009/08/15 13:46:13 :: wicd initializing...
    2009/08/15 13:46:13 :: ---------------------------
    2009/08/15 13:46:13 :: wicd is version 1.6.2 436
    2009/08/15 13:46:13 :: setting backend to external
    2009/08/15 13:46:13 :: trying to load backend external
    2009/08/15 13:46:14 :: successfully loaded backend external
    2009/08/15 13:46:14 :: trying to load backend external
    2009/08/15 13:46:14 :: successfully loaded backend external
    2009/08/15 13:46:14 :: Automatically detected wireless interface eth1
    2009/08/15 13:46:14 :: setting wireless interface eth1
    2009/08/15 13:46:14 :: automatically detected wired interface eth0
    2009/08/15 13:46:14 :: setting wired interface eth0
    2009/08/15 13:46:14 :: setting wpa driver wext
    2009/08/15 13:46:14 :: setting use global dns to False
    2009/08/15 13:46:14 :: setting global dns
    2009/08/15 13:46:14 :: global dns servers are None None None
    2009/08/15 13:46:14 :: domain is None
    2009/08/15 13:46:14 :: search domain is None
    2009/08/15 13:46:14 :: setting automatically reconnect when connection drops True
    2009/08/15 13:46:14 :: Setting dhcp client to 0
    2009/08/15 13:46:14 :: Wireless configuration file found...
    2009/08/15 13:46:14 :: Wired configuration file found...
    2009/08/15 13:46:14 :: chmoding configuration files 0600...
    2009/08/15 13:46:14 :: chowning configuration files root:root...
    2009/08/15 13:46:14 :: Using wireless interface...eth1
    2009/08/15 13:46:14 :: Using wired interface...eth0
    2009/08/15 13:46:20 :: Autoconnecting...
    2009/08/15 13:46:22 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:46:22 :: trying to automatically connect to...101
    2009/08/15 13:46:22 :: Connecting to wireless network 101
    2009/08/15 13:46:23 :: Putting interface down
    2009/08/15 13:46:23 :: Releasing DHCP leases...
    2009/08/15 13:46:23 :: Setting false IP...
    2009/08/15 13:46:23 :: Stopping wpa_supplicant
    2009/08/15 13:46:23 :: Flushing the routing table...
    2009/08/15 13:46:23 :: Putting interface up...
    2009/08/15 13:46:23 :: Generating psk...
    2009/08/15 13:46:23 :: Attempting to authenticate...
    2009/08/15 13:46:34 :: Running DHCP
    2009/08/15 13:46:34 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:46:34 ::
    2009/08/15 13:46:34 :: dhcpcd: eth1: broadcasting for a lease
    2009/08/15 13:46:34 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:38 :: dhcpcd: eth1: carrier lost
    2009/08/15 13:46:38 ::
    2009/08/15 13:46:40 :: dhcpcd: eth1: carrier acquired
    2009/08/15 13:46:40 ::
    2009/08/15 13:46:40 :: dhcpcd: eth1: broadcasting for a lease
    2009/08/15 13:46:40 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:51 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 :: dhcpcd: forking to background
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 :: DHCP connection successful
    2009/08/15 13:46:51 :: Connecting thread exiting.
    2009/08/15 13:46:55 :: Sending connection attempt result Success
    2009/08/15 13:48:50 :: Putting interface down
    2009/08/15 13:48:50 :: Releasing DHCP leases...
    2009/08/15 13:48:50 :: Setting false IP...
    2009/08/15 13:48:51 :: Flushing the routing table...
    2009/08/15 13:48:51 :: Putting interface up...
    2009/08/15 13:48:51 :: Running DHCP
    2009/08/15 13:48:51 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:51 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:51 :: dhcpcd: eth0: carrier lost
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:53 :: dhcpcd: eth0: carrier acquired
    2009/08/15 13:48:53 ::
    2009/08/15 13:48:53 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:48:53 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: offered 192.168.0.193 from 192.168.0.1
    2009/08/15 13:48:54 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: acknowledged 192.168.0.193 from 192.168.0.1
    2009/08/15 13:48:54 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: checking for 192.168.0.193
    2009/08/15 13:48:54 ::
    2009/08/15 13:49:00 :: dhcpcd: eth0: leased 192.168.0.193 for 86400 seconds
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 :: dhcpcd: forking to background
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 :: DHCP connection successful
    2009/08/15 13:49:00 :: Connecting thread exiting.
    2009/08/15 13:49:00 :: Sending connection attempt result Success
    2009/08/15 13:53:46 :: Connecting to wireless network 102
    2009/08/15 13:53:47 :: Putting interface down
    2009/08/15 13:53:47 :: Releasing DHCP leases...
    2009/08/15 13:53:47 :: Setting false IP...
    2009/08/15 13:53:47 :: Stopping wpa_supplicant
    2009/08/15 13:53:47 :: Flushing the routing table...
    2009/08/15 13:53:47 :: Putting interface up...
    2009/08/15 13:53:47 :: Generating psk...
    2009/08/15 13:53:47 :: Attempting to authenticate...
    2009/08/15 13:54:03 :: Running DHCP
    2009/08/15 13:54:03 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:05 :: dhcpcd: eth1: carrier lost
    2009/08/15 13:54:05 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: carrier acquired
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:11 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 :: dhcpcd: forking to background
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 :: DHCP connection successful
    2009/08/15 13:54:11 :: Connecting thread exiting.
    2009/08/15 13:54:11 :: Sending connection attempt result Success
    2009/08/15 13:55:03 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:55:03 :: Removing PID file...
    2009/08/15 13:55:03 :: Shutting down...
    2009/08/15 13:55:52 :: ---------------------------
    2009/08/15 13:55:52 :: wicd initializing...
    2009/08/15 13:55:52 :: ---------------------------
    2009/08/15 13:55:52 :: wicd is version 1.6.2 436
    2009/08/15 13:55:52 :: setting backend to external
    2009/08/15 13:55:52 :: trying to load backend external
    2009/08/15 13:55:53 :: successfully loaded backend external
    2009/08/15 13:55:53 :: trying to load backend external
    2009/08/15 13:55:53 :: successfully loaded backend external
    2009/08/15 13:55:53 :: Automatically detected wireless interface eth0
    2009/08/15 13:55:53 :: setting wireless interface eth1
    2009/08/15 13:55:53 :: automatically detected wired interface eth1
    2009/08/15 13:55:53 :: setting wired interface eth0
    2009/08/15 13:55:53 :: setting wpa driver wext
    2009/08/15 13:55:53 :: setting use global dns to False
    2009/08/15 13:55:53 :: setting global dns
    2009/08/15 13:55:53 :: global dns servers are None None None
    2009/08/15 13:55:53 :: domain is None
    2009/08/15 13:55:53 :: search domain is None
    2009/08/15 13:55:53 :: setting automatically reconnect when connection drops True
    2009/08/15 13:55:53 :: Setting dhcp client to 0
    2009/08/15 13:55:53 :: Wireless configuration file found...
    2009/08/15 13:55:53 :: Wired configuration file found...
    2009/08/15 13:55:53 :: chmoding configuration files 0600...
    2009/08/15 13:55:53 :: chowning configuration files root:root...
    2009/08/15 13:55:53 :: Using wireless interface...eth1
    2009/08/15 13:55:53 :: Using wired interface...eth0
    2009/08/15 13:55:59 :: Autoconnecting...
    2009/08/15 13:56:02 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:56:02 :: Putting interface down
    2009/08/15 13:56:02 :: Releasing DHCP leases...
    2009/08/15 13:56:02 :: Setting false IP...
    2009/08/15 13:56:02 :: Flushing the routing table...
    2009/08/15 13:56:02 :: Putting interface up...
    2009/08/15 13:56:02 :: Running DHCP
    2009/08/15 13:56:02 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:56:02 ::
    2009/08/15 13:56:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:56:02 ::
    2009/08/15 13:56:12 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:56:12 ::
    2009/08/15 13:56:32 :: dhcpcd: timed out
    2009/08/15 13:56:32 ::
    2009/08/15 13:56:32 :: DHCP connection failed
    2009/08/15 13:56:32 :: exiting connection thread
    2009/08/15 13:56:34 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:56:34 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:56:34 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:57:31 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:57:31 :: Removing PID file...
    2009/08/15 13:57:31 :: Shutting down...
    2009/08/15 13:57:32 :: ---------------------------
    2009/08/15 13:57:32 :: wicd initializing...
    2009/08/15 13:57:32 :: ---------------------------
    2009/08/15 13:57:32 :: wicd is version 1.6.2 436
    2009/08/15 13:57:32 :: setting backend to external
    2009/08/15 13:57:32 :: trying to load backend external
    2009/08/15 13:57:32 :: successfully loaded backend external
    2009/08/15 13:57:32 :: trying to load backend external
    2009/08/15 13:57:32 :: successfully loaded backend external
    2009/08/15 13:57:32 :: Automatically detected wireless interface eth0
    2009/08/15 13:57:32 :: setting wireless interface eth1
    2009/08/15 13:57:32 :: automatically detected wired interface eth1
    2009/08/15 13:57:32 :: setting wired interface eth0
    2009/08/15 13:57:32 :: setting wpa driver wext
    2009/08/15 13:57:32 :: setting use global dns to False
    2009/08/15 13:57:32 :: setting global dns
    2009/08/15 13:57:32 :: global dns servers are None None None
    2009/08/15 13:57:32 :: domain is None
    2009/08/15 13:57:32 :: search domain is None
    2009/08/15 13:57:32 :: setting automatically reconnect when connection drops True
    2009/08/15 13:57:32 :: Setting dhcp client to 0
    2009/08/15 13:57:32 :: Wireless configuration file found...
    2009/08/15 13:57:32 :: Wired configuration file found...
    2009/08/15 13:57:32 :: chmoding configuration files 0600...
    2009/08/15 13:57:32 :: chowning configuration files root:root...
    2009/08/15 13:57:32 :: Using wireless interface...eth1
    2009/08/15 13:57:32 :: Using wired interface...eth0
    2009/08/15 13:57:38 :: Autoconnecting...
    2009/08/15 13:57:38 :: Putting interface down
    2009/08/15 13:57:38 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:57:38 :: Releasing DHCP leases...
    2009/08/15 13:57:38 :: Setting false IP...
    2009/08/15 13:57:38 :: Flushing the routing table...
    2009/08/15 13:57:38 :: Putting interface up...
    2009/08/15 13:57:38 :: Running DHCP
    2009/08/15 13:57:38 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:57:38 ::
    2009/08/15 13:57:38 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:57:38 ::
    2009/08/15 13:57:48 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:57:48 ::
    2009/08/15 13:58:08 :: dhcpcd: timed out
    2009/08/15 13:58:08 ::
    2009/08/15 13:58:08 :: DHCP connection failed
    2009/08/15 13:58:08 :: exiting connection thread
    2009/08/15 13:58:08 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:58:10 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:58:10 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:58:46 :: Putting interface down
    2009/08/15 13:58:46 :: Releasing DHCP leases...
    2009/08/15 13:58:46 :: Setting false IP...
    2009/08/15 13:58:46 :: Flushing the routing table...
    2009/08/15 13:58:46 :: Putting interface up...
    2009/08/15 13:58:46 :: Running DHCP
    2009/08/15 13:58:46 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:58:46 ::
    2009/08/15 13:58:46 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:58:46 ::
    2009/08/15 13:58:56 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:58:56 ::
    2009/08/15 13:59:16 :: dhcpcd: timed out
    2009/08/15 13:59:16 ::
    2009/08/15 13:59:16 :: DHCP connection failed
    2009/08/15 13:59:16 :: exiting connection thread
    2009/08/15 13:59:16 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:10:08 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:10:08 :: Removing PID file...
    2009/08/15 14:10:08 :: Shutting down...
    2009/08/15 14:10:59 :: ---------------------------
    2009/08/15 14:10:59 :: wicd initializing...
    2009/08/15 14:10:59 :: ---------------------------
    2009/08/15 14:10:59 :: wicd is version 1.6.2 436
    2009/08/15 14:10:59 :: setting backend to external
    2009/08/15 14:10:59 :: trying to load backend external
    2009/08/15 14:10:59 :: successfully loaded backend external
    2009/08/15 14:10:59 :: trying to load backend external
    2009/08/15 14:10:59 :: successfully loaded backend external
    2009/08/15 14:10:59 :: Automatically detected wireless interface eth0
    2009/08/15 14:10:59 :: setting wireless interface eth1
    2009/08/15 14:10:59 :: automatically detected wired interface eth1
    2009/08/15 14:10:59 :: setting wired interface eth0
    2009/08/15 14:10:59 :: setting wpa driver wext
    2009/08/15 14:10:59 :: setting use global dns to False
    2009/08/15 14:10:59 :: setting global dns
    2009/08/15 14:10:59 :: global dns servers are None None None
    2009/08/15 14:10:59 :: domain is None
    2009/08/15 14:10:59 :: search domain is None
    2009/08/15 14:10:59 :: setting automatically reconnect when connection drops True
    2009/08/15 14:10:59 :: Setting dhcp client to 0
    2009/08/15 14:10:59 :: Wireless configuration file found...
    2009/08/15 14:10:59 :: Wired configuration file found...
    2009/08/15 14:10:59 :: chmoding configuration files 0600...
    2009/08/15 14:10:59 :: chowning configuration files root:root...
    2009/08/15 14:10:59 :: Using wireless interface...eth1
    2009/08/15 14:10:59 :: Using wired interface...eth0
    2009/08/15 14:11:06 :: Autoconnecting...
    2009/08/15 14:11:09 :: Attempting to autoconnect with wired interface...
    2009/08/15 14:11:09 :: Putting interface down
    2009/08/15 14:11:09 :: Releasing DHCP leases...
    2009/08/15 14:11:09 :: Setting false IP...
    2009/08/15 14:11:09 :: Flushing the routing table...
    2009/08/15 14:11:09 :: Putting interface up...
    2009/08/15 14:11:09 :: Running DHCP
    2009/08/15 14:11:09 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:11:09 ::
    2009/08/15 14:11:09 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 14:11:09 ::
    2009/08/15 14:11:19 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 14:11:19 ::
    2009/08/15 14:11:39 :: dhcpcd: timed out
    2009/08/15 14:11:39 ::
    2009/08/15 14:11:39 :: DHCP connection failed
    2009/08/15 14:11:39 :: exiting connection thread
    2009/08/15 14:11:41 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:11:41 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 14:11:41 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:13:00 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:13:00 :: Removing PID file...
    2009/08/15 14:13:00 :: Shutting down...
    2009/08/15 14:13:50 :: ---------------------------
    2009/08/15 14:13:50 :: wicd initializing...
    2009/08/15 14:13:50 :: ---------------------------
    2009/08/15 14:13:50 :: wicd is version 1.6.2 436
    2009/08/15 14:13:50 :: setting backend to external
    2009/08/15 14:13:50 :: trying to load backend external
    2009/08/15 14:13:50 :: successfully loaded backend external
    2009/08/15 14:13:50 :: trying to load backend external
    2009/08/15 14:13:50 :: successfully loaded backend external
    2009/08/15 14:13:51 :: Automatically detected wireless interface eth1
    2009/08/15 14:13:51 :: setting wireless interface eth1
    2009/08/15 14:13:51 :: automatically detected wired interface eth0
    2009/08/15 14:13:51 :: setting wired interface eth0
    2009/08/15 14:13:51 :: setting wpa driver wext
    2009/08/15 14:13:51 :: setting use global dns to False
    2009/08/15 14:13:51 :: setting global dns
    2009/08/15 14:13:51 :: global dns servers are None None None
    2009/08/15 14:13:51 :: domain is None
    2009/08/15 14:13:51 :: search domain is None
    2009/08/15 14:13:51 :: setting automatically reconnect when connection drops True
    2009/08/15 14:13:51 :: Setting dhcp client to 0
    2009/08/15 14:13:51 :: Wireless configuration file found...
    2009/08/15 14:13:51 :: Wired configuration file found...
    2009/08/15 14:13:51 :: chmoding configuration files 0600...
    2009/08/15 14:13:51 :: chowning configuration files root:root...
    2009/08/15 14:13:51 :: Using wireless interface...eth1
    2009/08/15 14:13:51 :: Using wired interface...eth0
    2009/08/15 14:13:57 :: Autoconnecting...
    2009/08/15 14:13:59 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:14:00 :: trying to automatically connect to...101
    2009/08/15 14:14:00 :: Connecting to wireless network 101
    2009/08/15 14:14:00 :: Putting interface down
    2009/08/15 14:14:00 :: Releasing DHCP leases...
    2009/08/15 14:14:00 :: Setting false IP...
    2009/08/15 14:14:00 :: Stopping wpa_supplicant
    2009/08/15 14:14:00 :: Flushing the routing table...
    2009/08/15 14:14:00 :: Putting interface up...
    2009/08/15 14:14:00 :: Generating psk...
    2009/08/15 14:14:01 :: Attempting to authenticate...
    2009/08/15 14:14:11 :: Running DHCP
    2009/08/15 14:14:11 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:15 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 :: dhcpcd: forking to background
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 :: DHCP connection successful
    2009/08/15 14:14:15 :: Connecting thread exiting.
    2009/08/15 14:14:17 :: Sending connection attempt result Success
    2009/08/15 14:14:17 :: Autoconnecting...
    2009/08/15 14:14:17 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:14:17 :: trying to automatically connect to...102
    2009/08/15 14:14:17 :: Connecting to wireless network 102
    2009/08/15 14:14:17 :: Putting interface down
    2009/08/15 14:14:17 :: Releasing DHCP leases...
    2009/08/15 14:14:18 :: Setting false IP...
    2009/08/15 14:14:18 :: Stopping wpa_supplicant
    2009/08/15 14:14:18 :: Flushing the routing table...
    2009/08/15 14:14:18 :: Putting interface up...
    2009/08/15 14:14:18 :: Generating psk...
    2009/08/15 14:14:18 :: Attempting to authenticate...
    2009/08/15 14:14:19 :: Running DHCP
    2009/08/15 14:14:19 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:24 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 :: dhcpcd: forking to background
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 :: DHCP connection successful
    2009/08/15 14:14:24 :: Connecting thread exiting.
    2009/08/15 14:14:29 :: Sending connection attempt result Success
    2009/08/15 14:15:02 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:15:02 :: Removing PID file...
    2009/08/15 14:15:02 :: Shutting down...
    2009/08/15 14:15:52 :: ---------------------------
    2009/08/15 14:15:52 :: wicd initializing...
    2009/08/15 14:15:52 :: ---------------------------
    2009/08/15 14:15:52 :: wicd is version 1.6.2 436
    2009/08/15 14:15:52 :: setting backend to external
    2009/08/15 14:15:52 :: trying to load backend external
    2009/08/15 14:15:52 :: successfully loaded backend external
    2009/08/15 14:15:52 :: trying to load backend external
    2009/08/15 14:15:52 :: successfully loaded backend external
    2009/08/15 14:15:52 :: Automatically detected wireless interface eth0
    2009/08/15 14:15:52 :: setting wireless interface eth1
    2009/08/15 14:15:52 :: automatically detected wired interface eth1
    2009/08/15 14:15:52 :: setting wired interface eth0
    2009/08/15 14:15:52 :: setting wpa driver wext
    2009/08/15 14:15:52 :: setting use global dns to False
    2009/08/15 14:15:52 :: setting global dns
    2009/08/15 14:15:52 :: global dns servers are None None None
    2009/08/15 14:15:52 :: domain is None
    2009/08/15 14:15:52 :: search domain is None
    2009/08/15 14:15:52 :: setting automatically reconnect when connection drops True
    2009/08/15 14:15:52 :: Setting dhcp client to 0
    2009/08/15 14:15:52 :: Wireless configuration file found...
    2009/08/15 14:15:52 :: Wired configuration file found...
    2009/08/15 14:15:52 :: chmoding configuration files 0600...
    2009/08/15 14:15:52 :: chowning configuration files root:root...
    2009/08/15 14:15:52 :: Using wireless interface...eth1
    2009/08/15 14:15:52 :: Using wired interface...eth0
    2009/08/15 14:15:59 :: Autoconnecting...
    2009/08/15 14:16:02 :: Attempting to autoconnect with wired interface...
    2009/08/15 14:16:02 :: Putting interface down
    2009/08/15 14:16:02 :: Releasing DHCP leases...
    2009/08/15 14:16:02 :: Setting false IP...
    2009/08/15 14:16:02 :: Flushing the routing table...
    2009/08/15 14:16:02 :: Putting interface up...
    2009/08/15 14:16:02 :: Running DHCP
    2009/08/15 14:16:02 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:16:02 ::
    2009/08/15 14:16:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 14:16:02 ::
    2009/08/15 14:16:12 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 14:16:12 ::
    2009/08/15 14:16:32 :: dhcpcd: timed out
    2009/08/15 14:16:32 ::
    2009/08/15 14:16:32 :: DHCP connection failed
    2009/08/15 14:16:32 :: exiting connection thread
    2009/08/15 14:16:34 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:16:34 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 14:16:34 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:17:02 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:17:02 :: Removing PID file...
    2009/08/15 14:17:02 :: Shutting down...
    2009/08/15 15:39:03 :: ---------------------------
    2009/08/15 15:39:03 :: wicd initializing...
    2009/08/15 15:39:03 :: ---------------------------
    2009/08/15 15:39:03 :: wicd is version 1.6.2 436
    2009/08/15 15:39:03 :: setting backend to external
    2009/08/15 15:39:03 :: trying to load backend external
    2009/08/15 15:39:03 :: successfully loaded backend external
    2009/08/15 15:39:03 :: trying to load backend external
    2009/08/15 15:39:03 :: successfully loaded backend external
    2009/08/15 15:39:03 :: Automatically detected wireless interface eth0
    2009/08/15 15:39:03 :: setting wireless interface eth1
    2009/08/15 15:39:03 :: automatically detected wired interface eth1
    2009/08/15 15:39:03 :: setting wired interface eth0
    2009/08/15 15:39:03 :: setting wpa driver wext
    2009/08/15 15:39:03 :: setting use global dns to False
    2009/08/15 15:39:03 :: setting global dns
    2009/08/15 15:39:03 :: global dns servers are None None None
    2009/08/15 15:39:03 :: domain is None
    2009/08/15 15:39:03 :: search domain is None
    2009/08/15 15:39:03 :: setting automatically reconnect when connection drops True
    2009/08/15 15:39:03 :: Setting dhcp client to 0
    2009/08/15 15:39:03 :: Wireless configuration file found...
    2009/08/15 15:39:03 :: Wired configuration file found...
    2009/08/15 15:39:03 :: chmoding configuration files 0600...
    2009/08/15 15:39:03 :: chowning configuration files root:root...
    2009/08/15 15:39:03 :: Using wireless interface...eth1
    2009/08/15 15:39:03 :: Using wired interface...eth0
    2009/08/15 15:39:10 :: Autoconnecting...
    2009/08/15 15:39:13 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:39:13 :: Putting interface down
    2009/08/15 15:39:13 :: Releasing DHCP leases...
    2009/08/15 15:39:13 :: Setting false IP...
    2009/08/15 15:39:13 :: Flushing the routing table...
    2009/08/15 15:39:13 :: Putting interface up...
    2009/08/15 15:39:13 :: Running DHCP
    2009/08/15 15:39:13 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:39:13 ::
    2009/08/15 15:39:13 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:39:13 ::
    2009/08/15 15:39:23 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:39:23 ::
    2009/08/15 15:39:43 :: dhcpcd: timed out
    2009/08/15 15:39:43 ::
    2009/08/15 15:39:43 :: DHCP connection failed
    2009/08/15 15:39:43 :: exiting connection thread
    2009/08/15 15:39:45 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:39:45 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:39:45 :: Sending connection attempt result dhcp_failed
    2009/08/15 15:41:46 :: Daemon going down, killing wicd-monitor...
    2009/08/15 15:41:46 :: Removing PID file...
    2009/08/15 15:41:46 :: Shutting down...
    2009/08/15 15:42:33 :: ---------------------------
    2009/08/15 15:42:33 :: wicd initializing...
    2009/08/15 15:42:33 :: ---------------------------
    2009/08/15 15:42:33 :: wicd is version 1.6.2 436
    2009/08/15 15:42:33 :: setting backend to external
    2009/08/15 15:42:33 :: trying to load backend external
    2009/08/15 15:42:33 :: successfully loaded backend external
    2009/08/15 15:42:33 :: trying to load backend external
    2009/08/15 15:42:33 :: successfully loaded backend external
    2009/08/15 15:42:33 :: Automatically detected wireless interface eth0
    2009/08/15 15:42:33 :: setting wireless interface eth1
    2009/08/15 15:42:33 :: automatically detected wired interface eth1
    2009/08/15 15:42:33 :: setting wired interface eth0
    2009/08/15 15:42:33 :: setting wpa driver wext
    2009/08/15 15:42:33 :: setting use global dns to False
    2009/08/15 15:42:33 :: setting global dns
    2009/08/15 15:42:33 :: global dns servers are None None None
    2009/08/15 15:42:33 :: domain is None
    2009/08/15 15:42:33 :: search domain is None
    2009/08/15 15:42:33 :: setting automatically reconnect when connection drops True
    2009/08/15 15:42:33 :: Setting dhcp client to 0
    2009/08/15 15:42:33 :: Wireless configuration file found...
    2009/08/15 15:42:33 :: Wired configuration file found...
    2009/08/15 15:42:33 :: chmoding configuration files 0600...
    2009/08/15 15:42:33 :: chowning configuration files root:root...
    2009/08/15 15:42:33 :: Using wireless interface...eth1
    2009/08/15 15:42:33 :: Using wired interface...eth0
    2009/08/15 15:42:39 :: Autoconnecting...
    2009/08/15 15:42:42 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:42:42 :: Putting interface down
    2009/08/15 15:42:42 :: Releasing DHCP leases...
    2009/08/15 15:42:42 :: Setting false IP...
    2009/08/15 15:42:42 :: Flushing the routing table...
    2009/08/15 15:42:42 :: Putting interface up...
    2009/08/15 15:42:42 :: Running DHCP
    2009/08/15 15:42:42 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:42:42 ::
    2009/08/15 15:42:42 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:42:42 ::
    2009/08/15 15:42:52 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:42:52 ::
    2009/08/15 15:43:12 :: dhcpcd: timed out
    2009/08/15 15:43:12 ::
    2009/08/15 15:43:12 :: DHCP connection failed
    2009/08/15 15:43:12 :: exiting connection thread
    2009/08/15 15:43:14 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:43:14 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:43:14 :: Sending connection attempt result dhcp_failed
    2009/08/15 15:44:27 :: Daemon going down, killing wicd-monitor...
    2009/08/15 15:44:27 :: Removing PID file...
    2009/08/15 15:44:27 :: Shutting down...
    2009/08/15 15:44:48 :: ---------------------------
    2009/08/15 15:44:48 :: wicd initializing...
    2009/08/15 15:44:48 :: ---------------------------
    2009/08/15 15:44:48 :: wicd is version 1.6.2 436
    2009/08/15 15:44:48 :: setting backend to external
    2009/08/15 15:44:48 :: trying to load backend external
    2009/08/15 15:44:48 :: successfully loaded backend external
    2009/08/15 15:44:48 :: trying to load backend external
    2009/08/15 15:44:48 :: successfully loaded backend external
    2009/08/15 15:44:48 :: Automatically detected wireless interface eth0
    2009/08/15 15:44:48 :: setting wireless interface eth1
    2009/08/15 15:44:48 :: automatically detected wired interface eth1
    2009/08/15 15:44:48 :: setting wired interface eth0
    2009/08/15 15:44:48 :: setting wpa driver wext
    2009/08/15 15:44:48 :: setting use global dns to False
    2009/08/15 15:44:48 :: setting global dns
    2009/08/15 15:44:48 :: global dns servers are None None None
    2009/08/15 15:44:48 :: domain is None
    2009/08/15 15:44:48 :: search domain is None
    2009/08/15 15:44:48 :: setting automatically reconnect when connection drops True
    2009/08/15 15:44:48 :: Setting dhcp client to 0
    2009/08/15 15:44:48 :: Wireless configuration file found...
    2009/08/15 15:44:48 :: Wired configuration file found...
    2009/08/15 15:44:48 :: chmoding configuration files 0600...
    2009/08/15 15:44:48 :: chowning configuration files root:root...
    2009/08/15 15:44:48 :: Using wireless interface...eth1
    2009/08/15 15:44:48 :: Using wired interface...eth0
    2009/08/15 15:44:58 :: trying to load backend ioctl
    2009/08/15 15:44:58 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
    2009/08/15 15:44:58 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
    2009/08/15 15:44:58 :: trying to load backend external
    2009/08/15 15:45:57 :: Autoconnecting...
    2009/08/15 15:45:57 :: Putting interface down
    2009/08/15 15:45:57 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:45:57 :: Releasing DHCP leases...
    2009/08/15 15:45:57 :: Setting false IP...
    2009/08/15 15:45:57 :: Flushing the routing table...
    2009/08/15 15:45:57 :: Putting interface up...
    2009/08/15 15:45:57 :: Running DHCP
    2009/08/15 15:45:57 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:45:57 ::
    2009/08/15 15:45:57 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:45:57 ::
    2009/08/15 15:46:07 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:46:07 ::
    2009/08/15 15:46:27 :: dhcpcd: timed out
    2009/08/15 15:46:27 ::
    2009/08/15 15:46:27 :: DHCP connection failed
    2009/08/15 15:46:27 :: exiting connection thread
    2009/08/15 15:46:29 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:46:29 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:46:29 :: Sending connection attempt result dhcp_failed

    Was able to boot this weekend and did an update which updated the kernel.  Rebooted and there was no network.  Rebooted again and no network... rebooted again and... had network!?  I tried changing wicd to use dhclient only and did the triple reboot test again and it didn't change anything... randomly working network... same with dhcpcd.
    So it appears to be a dhcp timeout issue however it makes no sense because before the update a couple weeks ago it was working every time with no hiccup.  Am I not providing enough information that will aid in anyone helping me figure this out?

  • Wireless network and bluetooth not working on touchsmart 600

    This has not worked since day 1 and I have been using wired internet.
    I really need to setup a home network and need to use wireless.
    Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
    Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
    Please advise  

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I have an ipad 2 32Gb wifi which I bought yesterday and it constantly crashes and will not reboot. Does anyone have a solution or is this a straight exchange??

    Hi
    I bought an IPAD 2 32GB wifi yesterday and was looking forward to using this. But it constantly crashes and will not reboot. Has anyone else had this problem and was there a solution? if not is this a straight return to the store and money back????

    Hi thanks for your advice, but i tried the reboot as you suggested and this does not work and the iPad now seems completely unresponsive. DesLite having a full charge I can not get any sign of life from the iPad.

  • Ultraslim wireless keyboard and mouse not working

    Hi ,  I purchased the Lenovo Ultraslim Wireless Keyboard & Mouse (pn: 57Y4700) about 4 months ago for use with my T60 laptop (which i use with a docking station and large lenovo monitor at work).
    Everything was woking fine until last Monday when I can into work after the weekend and neither the mouse or keyboard worked. I replaced the batteries in both, rebooted the machine several time, switch the USB ports for the nano receiver, but nothing seems to have worked.
    I looked online for troubleshooting options, but did not find anything.
    The mouse and keyboard don't seem to have a "sych" button - if I recall correctly everything worked right out of the box.
    My theory is that the nano reciever was damaged (not sure how) -- but don't know how to proceed:
    can the nano reciever be replaced;
    any other options to troubleshoot;
    any chance that this could be a software problem
    Thanks

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

    My A'Extreme sometimes won't connect to my MacBook Pro even if I have a green light on the device . I can unplug the ethernet cable and reconnect and it will work fine. all diagnostics say there is nothing wrong. Any ideas ?

    This is more about your modem then anything. Sometimes you'll need to unplug and plug back in your modem. Consider it a glitch from the ISP or just the modem in general.
    when I need to turn something off then on I try the modem first. This when I'm not doing any ware and tare to the device.

  • I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

    I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

    Hi
    I use
    • DV-PAL or DV-NTSC - or -
    • AIC
    Yours Bengt W

  • Has anyone a solution to two update having the following popup-"We could not complete your request.  There was an error in the App store.  Please try again later.?"  I've tried over 4 days without any change.

    Has anyone a solution to two update having the following popup-"We could not complete your request".  There was an error in the App store.  Please try again later.  I've tried over 4 days without any change.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

    I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

    Please also see Boot Camp: Set the default operating system.

  • I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and cannot do this. What can be done to restore my original functionality?

    I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and this no longer works. How could I restore the previous functionality? Is somethong wrong?

    Hi Eustace.
    Thanks for replying to my problem. After posting I noted the "More Like This" box on the right of the screen. The top topic was "Restore old dual screen functionality" and turned out to be the the same question with a surprising answer - in the "Mission Control" dialogue, NOT the "Displays" dialogue. There are five tick boxes at the top of the Mission Control screen and the last of them is "Displays have separate spaces" and this box was ticked through the loading of the Mavericks op. system (presumably). Unticking this box, as advised, restored the 'extended' mode and all is now well.
    We live and learn!

Maybe you are looking for

  • Need customised report for list of stock for  partially processed materials.

    Hi , The requirement with process im explaining plz share  the report. This customised report related to partiallly processed materials: Suppose , after recieving material  from vendor as raw material they will transfer the mat to vendor for processi

  • Help! My brand new iPod nano isn't being recongized by my computer!

    Hello. My iPod Nano 3rd Generation 8GB won't work on my computer. I just received it yesterday as an early Christmas gift from my mother. When I first tried to plug it in, the computer saw it, but then a bubble popped up saying 'You may have some pro

  • Pop ups in flex 2.0

    2 questions 1) when using popups is there any way to access the functions of the parent from within the popup? 2) can the execution of the code in the calling function be stopped untill the popup is closed? what im trying to say is this doSthBeforePo

  • Adding support to IDEA in gnupg | gpg?

    Hi everyone, im doing a university research and i need show an aplication who uses the IDEA algorithm. Looking in http://www.gnupg.org/faq/why-not-idea.en.html i see the module can be added but i don't know how.  here is another topic http://bytes.co

  • Assign Excel functionality to a New Button

    Hi all, Does anyone know how to assign the functionality of exporting to excel to a button? I mean if anyone knows the code in order to export to a excel file. I already know how to create a new button and the way to assign the function to it, but I