Two issues not related about OSX.6.7 on MacBook Pro 2.8Ghz 17", 8 GB RAM

Issue number one:
Just purchased (Feb22 2011) a MacBook 17" Pro 2.8 Ghz i7 Processor, 8 GB system RAM, 500 GB SATA Hard Drive. It was Replacement for a PowerBook 17".
I'm finding the keyboard on my new computer, not nearly as responsive as on my old PowerBook.
One thing it appears that the keyboard on my new computer is same type of keypad as a TV remote where they have a rubber membrane that have little pencil led carbon dots applied. If so it will be worn out within a Year or need to be taken apart and the board cleaned as long as the button. Most Remotes are worn out and need repairs or replacement within a year to 18 months. whereas my old computer has a real mechanical key switch type keyboard.
I am finding that that Ican actually type faster than the keyboard can keep up with and cause no end of editing for misspellings.
Second Issue: When on the Internet I notice that connection takes forever to respond.
I use several DNS number parts That I switch out, one from my ISP. One Pair from "OpenDNS" and one set from Google DNS. I notice when get in this rut of taking forever to respond. IF I quit and switch DNS settings Then restart. Everything Flies.
Doesn't make a difference what Browser or Email Client I use. IT act like there is a Kick Start when I do this.
Browsers and Email Clients I use:
SeaMonkey
FireFox
Camino
Safari
Postbox
Opera
OmniWeb
iCab
Seems like some cache file get to a limit then fails at a certain point.and when you switch DNS number pair it kicks out that old cacahe and starts over.
Any suggestions on either or both Problems.

Have you changed your Apple Menu - System Preferences - Keyboard & Mouse settings?

Similar Messages

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.

Jeremy.Laurin,
have you tried agb76’s approach here?

I have not yet enabled my firewall on my macbook pro-is this an issue?

I have not yet enabled my firewall on my macbook pro-is this an issue?

Mac OS X v10.5, 10.6: About the Application Firewall

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

Since Mavericks update my iPhone and iPad calendars
are NOT syncing with the calendar on my MacBook Pro.
I used to use iTunes but don't see the options now.
Does anyone know how to set up a sync.?

I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
both calendar and contacts and imported them in the MBA and synced normally.
Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
update the iphone until a permanent solution is found !
And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
I'm sure Samsung is having a ball ever since the sync issue was made public !
Hopefully Apple is listening and will make things right again !

HT203216 I can not reopen my microsoft outlook in my MacBook Pro?

I need help, I can not reopen my microsoft outlook in my MacBook Pro?

This is the iPad in the Enterprise forum and not the best place for you to get help with this issue since this doesn't seem to be an issue with an iPad. Being a question about using a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums.
Regards.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

Battery Not Charging after 10.6.8 Update (Macbook Pro 13' i5 2011)

Hi,
I own a 4 months old Macbook Pro 13in with i5 processor. I was using it normally until yesterday, when a software update prompting for enhancements on thunderbolt drivers and some stuff regarding OS X Lion was displayed. I started the software update, let the macbook plugged in and went to sleep.
Today I found out that my battery is not charging anymore (when plugged in, the magsafe led lights green and the energy saver displays Not Charging). I've already tried to restart SMC to no result(unplugged, waited for 15 sec, plugged again and after 5 sec turned it on).
Basically, my macbook is now useless. I use it mainly in the college, cant have it always plugged in and my second half classes start tomorrow!
I dont have a time machine backup.
I dont want to open the macbook since its still under warranty. What should I do?
The system profiler info can be found below:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i5
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B0E
SMC Version (system):          1.68f96
Serial Number (system):          C02FFNFLDH2G
Hardware UUID:          5C7658AB-7D4A-5731-A54F-8FC8ABCDA88C
Sudden Motion Sensor:
State:          Enabled
Power On Self-Test:
Last Run:          7/31/11 3:01 PM
Result:          Passed
Battery Information:
Model Information:
Serial Number:          W010858B9D3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          000a
Cell Revision:          0158
Charge Information:
Charge Remaining (mAh):          131
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5542
Health Information:
Cycle Count:          33
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          10987
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          0
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          30
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          30
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x00130284
Charging:          No

Did you follow these steps, EXACTLY?
http://support.apple.com/kb/ht3964
Note: Learn about removing the battery on MacBook and MacBook Pro.
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.

Why can't I install mountain lion on OSX 10.6.8 MACBOOK PRO?

I downloaded the mountain lion install app and now i can't install it I get the "This disk cannot be used to startup your computer" error when I try and install. If i back out to the main install page and try it again then i get this error "OSX cannot be installed on Macintosh HD". I have read similar posts and done appropriate responses such as verifying and reparing the HD. I have a Time Capsule that I backup to and I've tried disconnecting from it and ensured its not backing up during my attempts to install. Nothing seems to work. HELP!!!!
Computer Stats:
Early 2009 13" Macbook Pro
Model identifier: macbookpro 5,5
ram: 8GB
HD space available: 60GB
Processor: Duo core 2.53
Nothing out of the ordinary. I don't have any crazy setups, pretty much straight out of the box.

It was partitioned at one point when I had windows 7 on a boot camp partition. When I deleted it I formed it back into one partition. The only disk that shows up to choose in the installer is my main HD. Hope the pic helps.

I'm about to buy my first MacBook Pro and I need a little help

Hi everybody!
I'm about to buy my first MacBook pro and I have no experience on mac so I would be really thankfull if someone guides me to get an appropriate Notebook
Here are some imformations about what I want from a MacBook Pro:
1) I have a limited budget so the price can not go anywhere upper than 2,000 dollars
2) I'm a graphic designer working with photoshop, 3ds max and maya so I need strong CPU and VGA card
3) 15 inches and high resolution
4) Absolutly Lion OS
5) weight doesn't matter!
6) Ram doesn't matter cause I can upgrade it myself later when I got enogh money
7) Hard capacity doesn't matter (I can upgrade it later too)
8) It would be much better if it got HDMI port
That's all
Thanks for reading and answering

Except for #8, you're talking about the new entry-level MacBook Pro for $1,799.00 (see at http://store.apple.com/us/configure/MD103LL/A). It's a little less expensive at Amazon and you won't have to pay tax on it until you file next year instead of up-front.
It will do everything you need and, yes, you can upgrade it yourself when you get more cash. In fact, if you're willing to spend another $160 (still under your $2K limit) you can go ahead and upgrade the RAM to 16 GB. Later, spend $400 and put in a 512GB SSD.
Now to item #8. From monoprice, you can get a Thunderbolt-to-HDMI adapter for under $7 - click here.
You'll have exactly what you need for under $2K. Go for it...
Clinton

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Can someone please help me... i'm about to buy a new macbook pro and i need some pros and cons of SSD

hi.. i'm about to buy a new macbook pro and i need some pros and cons of SSD.... i'm not sure which is really better, the regular hard drive or the SSD... because if i buy the mac with SSD it would be the 128GB, so i want to know how would that affect the overall performance of the computer...
Thanks!

I would suggest that you purchase the SSD through a third party source. You will save money that way.
Regarding the performance, go to the OWC web site. They have bench tested their SSD vs conventional HDD and have published the results for anyone to see,
The difference between the 128GB and the 256GB drives is capacity, no practical change to performance.
Ciao.

HT3887 I m not able to found Bluetooth in my Macbook Pro. Error is Bluetooth : Not available.

I am not able to found Bluetooth in my Macbook Pro. Found error is Bluetooth not available. Please inform me.

Welcome to the Apple Support Communities
Somehow, OS X doesn't detect Bluetooth in your computer. First, reset the PRAM and the SMC, and see if you can use Bluetooth then.
If not, hold Command and R keys while your computer is starting to start in OS X Recovery, and reinstall OS X. If, after reinstalling OS X, you can't use Bluetooth, there's a hardware issue with your Mac, so take your Mac to an Apple Store or reseller

Two issues not related about OSX.6.7 on MacBook Pro 2.8Ghz 17", 8 GB RAM

Similar Messages

Maybe you are looking for